electromagnetic field theory fke skee 2523 sscfsem5 lect 01-24
TRANSCRIPT
![Page 1: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/1.jpg)
Copyright of M.H. Ibrahim, 2008
WELCOME TO THE WORLD OF
ELECTROMAGNETICS
Mohd Haniff Ibrahim
Room Number: P03-510
Email: [email protected]
H/P: 013-7146367
Notes are downloadable at mail.fke.utm.my/~hanif/teaching/SEE2523.htm
![Page 2: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/2.jpg)
Copyright of M.H. Ibrahim, 2008
• Course Outline
• Evaluation Method and Important Dates
• Contents
Electromagnetics Field Theory: SEE 2523
• Reference Books
![Page 3: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/3.jpg)
Copyright of M.H. Ibrahim, 2008
LECTURE #1
Topics to be covered: Revision on vectors
Motivation:
To enable the students to refresh their knowledge on vectors and its operation
Reference: Hayt & Buck, page 1-14
![Page 4: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/4.jpg)
Copyright of M.H. Ibrahim, 2008
Why Vectors?
AB
A
B
![Page 5: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/5.jpg)
Copyright of M.H. Ibrahim, 2008
Vector Operations
• Vector Components in Rectangular Coordinates
• The Dot Product
• The Cross Product
![Page 6: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/6.jpg)
Copyright of M.H. Ibrahim, 2008
Vector Components in Rectangular Coordinates
x
y
z
• A (2,4,5)
• B (4,5,6)
=AB
=BA
=AB
=BA
=r
=r
![Page 7: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/7.jpg)
Copyright of M.H. Ibrahim, 2008
Example: D1.1 (Hayt pg.8)
Given points M(-1,2,1), N(3,-3,0) and P(-2,-3,-4). Find:
a)
b)
c)
d)
e)
MNMPMN +
MPrM
NM 32 −
![Page 8: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/8.jpg)
Copyright of M.H. Ibrahim, 2008
The Dot Product
• The first type of vector multiplication
• The yield is a scalar component
•Definition:
ABcosBABA θ=•
• In rectangular coordinates:
•In general:
z,y,x
zzyyxx BABABABA ++=•
![Page 9: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/9.jpg)
Copyright of M.H. Ibrahim, 2008
Example: D1.3 (Hayt pg. 12)
The three vertices of a triangle are located at A (6,-1,2), B(-2,3,-4) and C(-3,1,5). Find:
a)
b)
c) The angle at vertex A
AB
AC
BACθ
![Page 10: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/10.jpg)
Copyright of M.H. Ibrahim, 2008
The Cross Product
• The second type of vector multiplication
• The yield is a vector component
• By definition:
nsinBABA ABθ=×
• The yield vector is normal to both A and B
• In rectangular coordinates:
• In general: z,y,x
zyx
zyx
BBB
AAAzyx
BA =×
![Page 11: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/11.jpg)
Copyright of M.H. Ibrahim, 2008
Example: D1.4 (Hayt pg.14)
The three vertices of a triangle are located at A(6,-1,2), B(-2,3,-4) and C(-3,1,5). Find:
a)
c) A unit vector perpendicular to the plane in which the triangle is located.
ACAB×
![Page 12: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/12.jpg)
Copyright of M.H. Ibrahim, 2008
Next Lecture
Please have a preliminary observation on the following topics:
a) Coordinate systems:
(i) Rectangular coordinate
(ii) Cylindrical coordinate
(iii) Spherical coordinate
Please refer to Hayt and Buck, page 14-22
![Page 13: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/13.jpg)
LECTURE #2
Topics to be covered: Coordinate Systems
Motivation:
To familiarize the students with common coordinate systems used in
solving electromagnetic problems
Reference: Hayt & Buck, page 14-22
![Page 14: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/14.jpg)
Why Coordinate Systems???
• Electromagnetic problems can be in any forms.
e.g.
Find electric/magnetic field in the wire and its surrounding.
Find electric/magnetic field induced by the radio antenna
Find electric/magnetic field induced by the telco tower
Need proper coordinate systems to analyze the electromagnetic problems
![Page 15: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/15.jpg)
Important parameters of coordinate systems
• Differential line length, (scalar and vector)
Application example: Obtain the electric potential (Chapter 4)
dl
• Differential area, (scalar and vector)
Application example: Obtain the electric field using Gauss’s Law (Chapter 3)
ds
• Differential volume, (scalar)
Application example: Obtain the electric field using Coulomb’s Law (Chapter 2)
dv
∫= dl.EV
enQdsD =∫ .
∫= 24 rdvEo
v
περ
![Page 16: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/16.jpg)
Rectangular Coordinate System (x, y, z)
x
y
z
A
B
From A to B: =
Surface C: ds =
Surface D: ds =
Surface E: ds =
dx
dz
dy
surface C
surface D
dl
surface E
x
y
z
![Page 17: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/17.jpg)
Cylindrical Coordinate System (r, , z)φ
y
dr
rdφ
dz
z
x
z
r
φ
H (r, , z)φ
r
φ
z
![Page 18: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/18.jpg)
Spherical Coordinate System (r, θ, )φ
y
z
x
φH (r, θ, )φ
φ
θr
r
θ
rdθ
drφrsinθd
![Page 19: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/19.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Type of electrostatic charges
(ii) Electric field intensity
(iii) Coulomb’s Law
Please refer to Hayt and Buck, page 26-48
![Page 20: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/20.jpg)
Lecture #3
Topics to be covered
(i) Type of electrostatic charges
Reference: Hayt and Buck, page 26-48
Motivation:
To familiarize the students with the type of sources for
electrostatic field
![Page 21: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/21.jpg)
Electric charges
• Smallest magnitude of charge,
q = 1.602 ×10-19 (Coulomb)
• Charge can be positive or negative
• In electromagnetic problems: electric charges can be of type:
(i) Point charge
(ii) Line charge
(iii) Surface charge
(iv) Volume charge
![Page 22: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/22.jpg)
Point charge
•Simplest electric charge
•Normally labeled as Q. Unit of Coulomb (C)
Q
Line charge
• Accumulated point charges along a thin line
• Accumulated point charges line charge density, ρl (C/m)
ρl (C/m)dldQ lρ=
A
B
Total charge along AB ???
dl
![Page 23: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/23.jpg)
Surface charge
• Accumulated point charges on a surface
•Accumulated point charges surface charge density, ρs (C/m2)
ρs(C/m2)
dsdQ sρ=
ds
Total charge on the surface ???
Area A
![Page 24: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/24.jpg)
Volume charge
• Accumulated point charges in a volume
•Accumulated point charges volume charge density, ρv (C/m2)
ρv(C/m2)
dvdQ vρ=
dv
Total charge in the volume ???
Volume V
![Page 25: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/25.jpg)
Example: D2.4 (b) (Hayt pg.37)
Calculate the total charge for the following volume:
φρπφ 6.0sin;42,0,1.00 22zrzr v =≤≤≤≤≤≤
Example: Problem 4.5 (Sadiku pg. 155)
Determine the total charge for the followings:
(i) On line 0<x<5m if ρl =12x2 mC/m
(ii) On the cylinder r=3, 0<z<4m if ρs=rz2 nC/m2
(iii) Within the sphere r=4m if ρv=10/rsinθ C/m3
![Page 26: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/26.jpg)
Example: Problem 2.1a (Skitek pg. 51)
Find the charge within a sphere of radius 0.03m when the charge density is given by:
( )3223
/sin
cos102 mCrv θ
φρ−×
=
![Page 27: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/27.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Electric field intensity
(ii) Coulomb’s Law
Please refer to Hayt and Buck, page 26-48
![Page 28: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/28.jpg)
Lecture #4
Topics to be covered:
(i)Electric Field Intensity
(ii) Coulomb’s Law
Reference: Hayt and Buck, page 26-48
Motivation:
To understand the concept of electric field intensity and
its method of calculation
![Page 29: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/29.jpg)
Electric (Electrostatic) Field Intensity
• Field generated by the static charges mentioned in the last lecture.
• Symbol of . Unit of volt/meter, (V/m).
• The first law to calculate the is Coulomb’s Law.
E
Electro+ static
Electric field Static sources
E
![Page 30: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/30.jpg)
Coulomb’s Law
• The law was developed by French physicist, Charles Augustin de Coulomb in 1780s.
“ The magnitude of electrostatic force between two point electric charges is directly proportional to the product of the
magnitudes of each charge and inversely proportional to the square of the distance between the charges”
221
rQQF ∝
![Page 31: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/31.jpg)
Coulomb’s Law
Q1 Q2
2F1F12r21r
12221
2 rrQQkF =e.g.
Coulomb’s experiments: Constant, o
kπε41
=
εo : Permittivity in free space/Dielectric constant of vacuum.
≈ 8.854 × 10-12 Farad/meter (F/m)
(Newton)
![Page 32: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/32.jpg)
Coulomb’s Law
With regard to Lorentz Force Law (Chapter 9):
EQF =
Hence,
1221
1 ˆ4
rr
QEoπε
=
2122
2 ˆ4
rr
QEoπε
=
Q1
12r
1EA
Q2
21r
2EB
Field at A;
Field at B;
V/m
V/m
r
![Page 33: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/33.jpg)
Coulomb’s Law for Point Charge
Electric field intensity incur by any point charge, Q
rr
QEo
ˆ4 2πε
=
Q
r
EB
r
Unit of voltage/meter (V/m)
![Page 34: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/34.jpg)
Example: Problem 4.1 (Sadiku)
Point charges, Q1=5µC and Q2=-4µC are placed at (3,2,1) and (-4,0,6) respectively. Determine the force on Q1.
Example: Problem D2.2 (Hayt)
A charge of -0.3µC is located at A(25,-30,15) (in cm) and a second charge of 0.5µC is at B(-10,8,12) cm. Find electric field intensity at (a) origin, (b) P(15,20,50) cm.
![Page 35: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/35.jpg)
Example: Problem 4.2 (Sadiku)
Point charges Q1 and Q2 are respectively located at (4,0,-3) and (2,0,1). If Q2 = 4 nC, find Q1 such that:
a) The electric field at (5,0,6) has no z component.
b) The force on a test charge at (5,0,6) has no x component.
Example: Problem 4.3 (Sadiku)
Five identical 15 µC point charges are located at the center and corners of a square defined by -1<x,y<1, z=0.
(a) Find the force on 10µC point charge at (0,0,2)
(b)Calculate the electric field intensity at (0,0,2)
![Page 36: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/36.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Electric field intensity of continuous charge distribution.
Please refer to Hayt and Buck, page 26-48
![Page 37: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/37.jpg)
Lecture #5
Topics to be covered:
Electric Field Intensity of Continuous Charge
Distribution
Reference: Hayt and Buck, page 34-48
Motivation:
To calculate the electric field intensity based on continuous
charge distribution
![Page 38: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/38.jpg)
Recall (Coulomb’s Law)
Previously, Coulomb’s Law for point charge:
At A;
Rao
ar
QE ˆ4 2πε
=
Q A
Ra
ra
What if Q is a line charge, surface charge or volume charge ???
(V/m)
![Page 39: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/39.jpg)
Electric Field Intensity-Line Charge Distribution
What is the field at A as incurred by the line charge?
A
( )mCl /ρ
l
Step 1: Identify small line length, dl with element of charge, dQ
dldQ lρ=dl
Ro
l aR
dlEd ˆ4 2περ
=
Step 2: Identify the electric field intensity, dE as contributed by dQ (based on Coulomb’s Law).
∫=z
o
total EdE
Step 3: Integrate dE, over the length of line charge, z, to obtain total electric field.
![Page 40: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/40.jpg)
Electric Field Intensity-Line Charge Distribution
For line charge, normally cylindrical coordinate system was utilized.From previous,
A
'dzdQ lρ=dz’
( )zr ,,φ
lρ
r
x
y
z
φ
z
E field at A ???
Step 1: ???
Step 2: ???
Step 3: ???
z’
a
b
![Page 41: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/41.jpg)
Electric Field Intensity-Line Charge Distribution
Step 1: 'dzdQ lρ=
Step 2:
( )( )( )( )( )212'2
'
2'2
' ˆˆ
4 zzr
zzzrr
zzrdzEd
o
l
−+
−−
−+=
περ
Step 3: Using ;
( ) ( ) mVrz
rrE
o
l /coscosˆ
sinsinˆ
4 1212⎭⎬⎫
⎩⎨⎧ −++= αααα
περ
( ) ( )21
22223
22 xcc
x
xc
dx
+=
+∫
( ) ( )21
2223
22
1
xcxc
xdx
+
−=
+∫and
![Page 42: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/42.jpg)
Electric Field Intensity-Line Charge Distribution
For a ∞ and b ∞ (line charge of infinite length)
( )mVrr
Eo
l /ˆ2περ
=
![Page 43: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/43.jpg)
Problem 2.19 - Hayt
A uniform line charge of 2µ C/m is located on the z axis. Find electric field in Cartesian coordinates at P(1,2,3) if the charge extends from (a) z = -∞ to z= ∞; (b) z=-4 to z=4
Example: Problem 2.5.1 (Skitek)
Find the electric field intensity on the axis of a circular ring of uniform charge, ρl and radius a. Let the axis of the ring be along the z axis.
![Page 44: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/44.jpg)
Example: Problem 2.5.2 (Skitek)
Find the electric field at P(0,0,1.5) due to two infinite and parallel line charges of uniform ρl. Let one ρl=10-6
C/m line be located at y=2 m and other ρl =-10-6 C/m line be located at y=-2m, with both lines parallel to the z axis and in the z=0 plane.
Problem 2.26: Hayt
A uniform line charge density of 5 nC/m is at y=0, z =2 in free space, while -5 nC/m is located at y=0, z=-2m. Find the electric field at the origin.
![Page 45: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/45.jpg)
Example: Problem 2.5.2 (Skitek)
Two identical uniform line charges, with ρl =75 nC/mare located in free space at x=0, y=±0.4m. What force perunit length does each line exert on the other.
Example: D2.5 (Hayt page 43)
Infinite uniform line charges of 5 nC/m lie along the (positive and negative) x and y axes in free space. Find electric field intensity at (a) (0,0,4) ; (b) (0,3,4)
![Page 46: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/46.jpg)
Electric Field Intensity-Surface Charge Distribution
ρs (C/m2)
BWhat is the electric field at B ???
As in the case of line charge distribution;
dS
Step 1: Identify small surface, dS having charge element of dQ
dSdQ sρ=
Step 2: Identify electric field intensity, dE as contributed by dQ
Ro
S aR
dSEd ˆ4 2περ
=
Step 3: Integrate dE over the total surface, to obtain total electric field
∫=surface
EdE
![Page 47: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/47.jpg)
Electric Field Intensity-Surface Charge Distribution
)/(ˆ4 2 mVa
RdSE Ro
s
περ
=
For a finite surface area, electric field incurred at any desired location:
What if the surface is having infinite area ???
Consider a circular surface charge having density of ρS (C/m2) with radius a, centered at origin and lying on the z=0 plane.
To solve
![Page 48: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/48.jpg)
Electric Field Intensity-Surface Charge Distribution
x
y
z
a
C (0,0,z)Find electric field at C ???
dS
( )φρρ rdrddSdQ sS ==
( )( ) ⎥
⎥
⎦
⎤
⎢⎢
⎣
⎡
+
+−=
23
224 zr
zzrrrdrdEdo
s
πεφρ
Using cylindrical coordinate;
∞→aConsider;
???E
![Page 49: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/49.jpg)
Electric Field Intensity- Infinite Surface Charge Distribution
For surface charge distribution of infinite area:
)m/V(nEo
s
ερ2
=
![Page 50: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/50.jpg)
Example:D2.6 (Hayt, page 45)
Three infinite uniform sheets of charge are located in free space as follows: 3 nC/m2 at z =-4, 6 nC/m2 at z=-1 and -8 nC/m2 at z=-4. Find electric field intensity at the point (a) (2,5,-5); (b) (4,2,-3); (c) (-1,-5,2) and (d) (-2,4,5)
Example: (Exercise from Skitek)
Find the electric field along the z axis, as incurred by the annular ring with surface charge density of ρs, having inner radius of a and outer radius of b.
![Page 51: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/51.jpg)
Example:Problem 2.6-1 (Skitek)
A semi-infinite sheet of charge density, ρS is described by -∞< x <0, -∞< y <∞, in the z=0 plane. Calculate the component of electric field normal to the sheet at a distance a, directly above the edge at x=0.
![Page 52: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/52.jpg)
Electric Field Intensity-Volume Charge Distribution
As previously noted:
)/(ˆ4
)/(ˆ4 22 mVa
RdVmVa
RdQE R
o
vR
o περ
πε==
However, we are not going to cover on detail…..
However, electric field due to volume charge distribution will be elaborated in Chapter 3.
End of Chapter 2…..
![Page 53: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/53.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Electric Flux
(ii) Electric Flux Density
(iii) Gauss’s Law
Please refer to Hayt and Buck, page 51-67
![Page 54: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/54.jpg)
Lecture #6
Topics to be covered:
(i) Electric Flux/ Flux Density
(ii) Gauss’s Law
Reference: Hayt and Buck, page 51-67
Motivation:
To understand the concept of electric flux/ flux density and to apply the Gauss’s Law in electric
field calculation
![Page 55: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/55.jpg)
Electric FluxSketched field lines (imaginary lines) pointed outwards from the electric charge. Symbol of ΨE (psi). A scalar component.
Flux is in the same direction as the electric field
QElectric flux about a point charge
Relation: ΨE=Q Unit of electric flux: Coulomb
E
![Page 56: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/56.jpg)
Electric Flux
-∞
∞
Electric flux about an infinite line charge
∞
∞
∞
Electric flux about an infinite surface charge
∞
![Page 57: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/57.jpg)
Electric Flux Density
Symbol of : vector quantity
Unit of Coulomb/m2
D
Total electric flux, ΨSurface with area A
( )2m/CA
D Ψ=∴
![Page 58: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/58.jpg)
Electric Flux Density
Consider a sphere with radius r, and we locate a point charge, Q at the centre of the sphere:
Q
Flux density at radius r:
( )222 44
m/Crr
Qrr
D E
ππψ
==
Electric field intensity at radius r:
( )m/Vrr
QEo
24πε=
Hence: ED oε=
![Page 59: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/59.jpg)
Electric Flux Density
Consider a small portion of sphere (radius of r ) surface, dS and flux (from point charge, Q, at the centre) pass through the surface.
Small element of flux that pass through dS :
∫=dS,surface
E dS.Ddψ
Total flux that pass through the sphere:
∫ ==Ssurface
EE Qd,
ψψ
∫ ==Ssurface
enclosedQdSD,
.Gauss’s Law
dS
Flux density,
D
Q
![Page 60: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/60.jpg)
Gauss’s Law
The law was developed by Carl Friedrich Gauss, a German mathematician in the early 19th century.
The law states that:
“ Total electric flux passing through any closed imaginary surface, enclosing the charge Q(Coulomb), is equal to Q (Coulomb)”
How to apply Gauss’s Law in calculating electric field???
Mathematically;
∫ =surface
enQdSD .
![Page 61: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/61.jpg)
Gauss’s Law-Point Charge
Q
Step 1: Draw a close imaginary surface with radius of r, enclosing the point charge Q. Spherical surface can be used.
Imaginary surface
ensurface
QdSD =∫ .
The aim is to find an electric field at a distance r from the point charge.
r
Step 2: Apply the Gauss’s Law, and obtain the flux density, DStep 3: Use the relation of and obtain . The obtained electric field is the electric field at a distance r from the point charge.
ED oε= E
![Page 62: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/62.jpg)
Gauss’s Law- Line ChargeStrictly for special case of line charge – Infinite length of line charge.
The aim is to find an electric field at a distance r from the line charge.
-∞
∞
r
Step 1: Draw a close imaginary surface with radius of r, enclosing the line charge ρl. Cylindrical surface can be used.
Step 2: Apply the Gauss’s Law, and obtain the flux density, D
Step 3: Use the relation of and obtain . The obtained electric field is the electric field at a distance r from the line charge.
ED oε=E
L
( )mCl /ρ
![Page 63: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/63.jpg)
Gauss’s Law- Surface ChargeStrictly for special case of surface charge – Infinite area of surface charge.
The aim is to find an electric field above and below the surfacecharge.
aStep 1: Draw a close imaginary surface enclosing the surface charge ρS.Cylindrical surface with radius r can be used.
ρS(C/m2)
Step 2: Apply the Gauss’s Law, and obtain the flux density, DStep 3: Use the relation of and obtain . The obtained electric field is the electric field above the surface charge.
ED oε=E
r
![Page 64: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/64.jpg)
Exercise #1: Skitek
Through the use of Gauss’s Law, find the expression for , inside and outside of a sphere of ro radius and of uniform ρV(C/m3) distribution.
D E
Exercise #2: Skitek
Through the use of Gauss’s Law, find the expression for , inside and outside an infinite cylinder of ro radius and of uniform ρV (C/m3) distribution.
D E
![Page 65: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/65.jpg)
Example 1
Let (nC/m2) in free space.
(a) Find at r = 0.2 m.
(b)Find the total charge within the sphere, r = 0.2 m.
(c) Find the total electric flux leaving the sphere, r = 0.3 m.
rrD ˆ3
=
E
Example 2
The cylindrical surfaces, r = 1, 2 and 3 cm carry uniform surface charge densities of 20, -8 and 5 nC/m2, respectively.
(a) How much electric flux passes through the closed surface, r=5 cm, 0<z<1m
(b)Find at P(1cm, 2 cm, 3 cm)D
![Page 66: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/66.jpg)
Example 3
The spherical surfaces r = 1, 2 and 3 cm carry surface charge density of 20, -9 and 2 nC/m2, respectively.
(a) How much electric flux leaves the spherical surface r =5 cm.
(b)Find at P (1cm, -1 cm, 2 cm). D
Example 4: (Hayt)
Spherical surfaces at r = 2, 4 and 6 m carry uniform surface charge densities of 20 nC/m2, -4 nC/m2 and ρso, respectively.
(a) Find at r = 1, 3 and 5 m.
(b)Determine ρso such that = 0 at r = 7m.
DD
![Page 67: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/67.jpg)
Example 5: D 3.5 (Hayt)
A point charge of 0.25 µC is located at r =0, and uniform surface charge densities are located as follows: 2 mC/m2 at r =1 cm and -0.6 mC/m2 at r = 1.8 cm. Calculate at:D
(a) r = 0.5 cm
(b) r = 1.5 cm
(c) r = 2.5 cm
(d)What uniform surface charge density should be established at r = 3 cm to cause = 0 at r = 3.5 cm. D
![Page 68: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/68.jpg)
Example 6: (Hayt)
A uniform volume charge density of 80 µC/m3 is present throughout the region 8 mm < r < 10 mm. Let ρV = 0 for
0 < r < 8 mm.
(a) Find the total charge inside the spherical surface, r = 10mm.
(b)Find Dr at r = 10 mm.
(c) If there is no charge for r > 10 mm, find Dr at r = 20 mm.
![Page 69: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/69.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Divergence
(ii) Divergence Theorem
Please refer to Hayt and Buck, page 67-75
![Page 70: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/70.jpg)
Lecture #7
Topics to be covered:
(i) Divergence
(ii) Divergence Theorem
Reference: Hayt and Buck, page 67-75
Motivation:
To understand the divergence concept and the application of divergence theorem
![Page 71: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/71.jpg)
Divergence
Consider the Gauss’s Law;
ensurface
QdSD =•∫
Graphically;
∫ •surface
dSD
Qen
What if the closed surface volume shrink to zero ?
Let the charge be located at (xo, yo, zo)
(xo, yo, zo)
![Page 72: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/72.jpg)
Divergence
Consider the closed surface volume shrink to zero. Take ∆v as the closed surface volume.
Divided both sides of Gauss’s Law with ∆v and take the limit as ∆v 0.
⎥⎦⎤
⎢⎣⎡∆
=
⎥⎥⎥⎥
⎦
⎤
⎢⎢⎢⎢
⎣
⎡
∆
•
→∆→∆
∫v
Qv
dSDen
v
surface
v 00limlim
Mathematically;
Charge density, ρV at point (xo, yo, zo)Divergence of orD D•∇
![Page 73: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/73.jpg)
Divergence
Using a divergence concept, the Gauss’s Law can be stated as:
VD ρ=•∇
Physically;
1st Maxwell’s equation for static
field
“ It relates the rate of change of the component to the charge density, ρV at a point”
D
Positive divergence
“flux source”
Negative divergence
“sink of flux”
+ρV
D
-ρV
D
VD ρ=•∇ VD ρ−=•∇
![Page 74: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/74.jpg)
Divergence
Divergence operator, is a vector quantity:( )•∇Heavily depending upon coordinate system.
Rectangular:
Cylindrical:
Spherical:
zD
yD
xDD zyx
∂∂
+∂
∂+
∂∂
=•∇
( )z
DDr
rDrr
D zr ∂
∂+
∂∂
+∂∂
=•∇φφ11
( ) ( )φθ
θθθ
φθ ∂
∂+
∂∂
+∂∂
=•∇D
rD
rDr
rrD r sin
1sinsin11 2
2
![Page 75: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/75.jpg)
Example 1
Find the volume charge density that is associated with each of the following fields:
( )222 /ˆˆˆ mCzzyyxxxyD ++=(a)
(b) ( )222222 /ˆsinˆcossinˆsin mCzzrrzrrzD φφφφφ ++=
Example 2
If , find:( )23 /ˆ2ˆ2ˆ4 mCzyyzxxD −−=(a) div D
(b) ρV at P(x, y, z)
(c) the total charge lying within the region -1<x,y,z<1
(d) the total charge lying within that region without finding ρV first.
![Page 76: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/76.jpg)
Example 3
Evaluate above an infinite sheet of uniform charge distribution, ρS (C/m2) located at the z = 0 plane.
D•∇
Example 4
Evaluate at a distance r from an infinite length of line charge of uniform charge distribution, ρl (C/m). The line charge is located at z-axis.
D•∇
![Page 77: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/77.jpg)
x
y
z
b
Example 5
a
ρV (C/m3)
(a) Find the expression of at r<a, a<r<b and r>b
(b)Evaluate at r<a, a<r<b and r>bD
D•∇
![Page 78: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/78.jpg)
Divergence Theorem
A theorem used to relate the surface integral to a volume integral involving the same vector.
ρV
∫ •surface
dSD
∫=volume
Ven dVQ ρ
Consider a volume charge and applying the Gauss Law.
D•∇
Divergence Theorem∫∫ •∇=•volumesurface
dVDdSD⇒
∫∫ ==•⇒volume
Vensurface
dVQdSD ρ
Gauss’s Law:
![Page 79: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/79.jpg)
Summary of Chapter 3
Students are expected to be well-versed in the followings:
(d) Extension of Gauss’s Law that lead to the concept of divergence (1st Maxwell’s equation for static field)
(a) Concept of electric flux and flux density
(b) Relation between flux density and electric field
(c) Application of Gauss’s Law in calculating electric field induced by special cases of charge distribution
The end of chapter 3
![Page 80: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/80.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Potential Difference
(ii) Absolute Potential
Please refer to Hayt and Buck, page 87-105
![Page 81: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/81.jpg)
Lecture #8
Topics to be covered:
(i) Potential difference
(ii) Absolute Potential
Reference: Hayt and Buck, page 80-105
Motivation:
To enable the students to understand the concept of potential difference and
absolute potential induced by point charge and continuous charge system
![Page 82: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/82.jpg)
Work in Electric Field
E
Q
Point B
Point A
( )JouledlFdW •−=
Small work done in moving Q along the length dl:
dl
Work done in moving Q from point B to point A:∴
( )JouledlEQWA
B∫ •−=
![Page 83: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/83.jpg)
Work in Electric Field
Vector of length; (Discussed in our first and second lecture)dl
Depending on the coordinate used:
( )( )
( )Sphericaldrrdrdrdl
lCylindricazdzrdrdrdl
Cartesianzdzydyxdxdl
φφθθθ
φφˆsinˆˆ
ˆˆˆ
ˆˆˆ
++=
++=
++=
![Page 84: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/84.jpg)
Example
(2,0,0)
x
y
z
(0,4,0)
(0,0,4)
Path 1
Path 2
Obtain the work done in moving 2 C charge in existence of
(i) From (2,0,0) to (0,4,0) along path 1
(ii) From (2,0,0) to (0,4,0) along path 2
(iii) Round trip movement at (2,0,0) along path 1 and path 2.
zzyyxxE ˆˆˆ ++=
![Page 85: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/85.jpg)
Work in Electric Field
From previous example:
(i) = (ii)The work done does not depend on the path taken.
From (iii);
0=•−= ∫ dlEQW 2nd Maxwell’s equation for
static field
![Page 86: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/86.jpg)
Potential Difference/Potential
Work done in moving a unit of charge from point B to point A:
=QW ∫ •−
A
B
dlE (volt)
Absolute potential (potential): (if point B is in infinity)
From above:
∫∞
∞ •−=−=A
A dlEVVQW
Potential difference between point A and B
BA
A
BAB VVdlEV −=•−= ∫
![Page 87: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/87.jpg)
Potential Difference (Point Charge)
Q
rA
rB
AB
Let us move a unit of positive charge, 1C from point B to point A:
The potential difference between point B and point A
∫ •−=A
BAB dlEV
( ) rdrdl;m/Vrr
QEo
== 24πε
From:
???VVV BAAB =−=∴
![Page 88: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/88.jpg)
Q
rA
∞
A∞
( ) ∫∞∞ •−=A
A dlEV
Absolute Potential/Potential (Point Charge)
What if B=∞
???VVA ==∴
![Page 89: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/89.jpg)
Potential (Charge System)
Q4
What is total absolute potential/potential at A ???
A
Q1
Q2 Q3
R1
R2R3
R41
1
4 RQ
oπε
2
2
4 RQ
oπε
3
3
4 RQ
oπε4
4
4 RQ
oπε
∑=
=+++=∴4
14
4
3
3
2
2
1
1
44444 i io
i
ooooA R
QR
QR
QR
QR
QVπεπεπεπεπε
![Page 90: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/90.jpg)
Potential (Charge System)
What if we have a system of charges; i.e. line charge, surface charge, volume charge ???
ASurface charge; ρS (C/m2)
From previous slide:
∑=
=4
1 4i io
iA R
QVπε ∫=∴
surface oA R
dQVπε4
What is the potential at A due to the surface charge ??
Continuous charge system
![Page 91: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/91.jpg)
Potential (Charge System)
In general; potential at a point (let point A) due to continuous system of charges:
Line Charge:
Surface Charge:
Volume Charge:
∫=surface o
SA R
dSVπερ
4
∫=line o
lA R
dlVπερ
4
∫=volume o
vA R
dvVπερ
4
![Page 92: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/92.jpg)
Example 1: Skitek
Obtain the expression for the absolute potential along the z-axis of a ring of uniform ρl (C/m) and whose radius is ro. The ring is located at z = 0.
( )z
zr
zrE
oo
ol
23
222 +=
ε
ρ
Given; electric field at any point on z axis
![Page 93: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/93.jpg)
Example 2: Skitek
Obtain the absolute potential inside and outside a thin shell, centered at the origin, of uniform ρS (C/m2) and of radius ro. Obtain the potential at:
( )
( )( ) o
o
o
rriiirrii
rri
2
2
==
=
![Page 94: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/94.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Potential Gradient
(ii) Energy Density in the Electrostatic Field
Please refer to Hayt and Buck, page 95-110
![Page 95: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/95.jpg)
Lecture #9
Topics to be covered:
(i) Potential Gradient
(ii) Energy Density in Electrostatic Field
Reference: Hayt and Buck, page 95-110
Motivation:
To enable the students to calculate the electric field using the potential value
and to understand the concept of energy density in electrostatic field
![Page 96: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/96.jpg)
Recall …
Charge Distribution
( )vSlQ ρρρ ,,,
Coulomb’s Law
Electric Field Intensity
E
Gauss’s Law
Electric Potential
V
∫= RdQV
oπε4
Potential Gradient
![Page 97: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/97.jpg)
Potential Gradient
Consider…
RQV
oA πε4=
Q
Point A
R
Alternatively, electric field at point A can be obtained using gradient of potential at point A
AA VE ∇−=
gradient or grad
Gradient operator:
zzVy
yVx
xVV ˆˆˆ
∂∂
+∂∂
+∂∂
=∇
zzVV
rr
rVV ˆˆ1ˆ
∂∂
+∂∂
+∂∂
=∇ φφ
φφθ
θθ
ˆsin1ˆ1ˆ
∂∂
+∂∂
+∂∂
=∇V
rV
rr
rVV
(Cartesian)
(Cylindrical)
(Spherical)
![Page 98: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/98.jpg)
Example 1
Please refer to Example 1 in Lecture #8. Given the potential at any point on z-axis is:
( )21222 zr
rV
oo
ol
+=
ε
ρ
Obtain the electric field term at any point on z-axis and prove that the answer is similar to the given term in Example 1 (Lecture #8).
![Page 99: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/99.jpg)
Example 2
Using Example 2 in Lecture #8, obtain the electric field terms at the following location (radius) based on the previously obtained potential terms:
( )
( )( ) o
o
o
rriiirrii
rri
2
2
==
=
Verify your results using the common law.
![Page 100: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/100.jpg)
Energy Density in Electrostatic Field
ρl (C/m)
ρS (C/m2)
ρv (C/m3)
What is the total energy conserved by the charge distributions?
![Page 101: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/101.jpg)
Energy Density in Electrostatic Field
For simplicity, consider…
We have a system of four point charges.
The work done by an external source in positioning (locating) the charges
What is the energy (potential energy) present in such system of charges ???
Q4
Q3
Q2
Q1
![Page 102: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/102.jpg)
Energy Density in Electrostatic Field
How to calculate the work done by external source in positioning the charges ???
Step 1: Assume that the system is empty (no charge exist)
Step 2: Bring point charge, Q1 from infinity into the system. No work required !!!!
Q101 ==WW
![Page 103: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/103.jpg)
Energy Density in Electrostatic Field
Step 3: Bring point charge, Q2 from infinity into the system. Requires work !!!!
Q1
Q2R21
21
12
212
21
40
0
RQQ
VQWWW
oπε+=
+=+=
Step 4: Bring point charge, Q3 from infinity into the system. Requires work !!!!
Q1
Q2R21
Q3
R31
R32
![Page 104: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/104.jpg)
( )
⎟⎟⎠
⎞⎜⎜⎝
⎛+++=
+++=++=
32
23
31
13
21
12
323313212
321
4440
0
RQQ
RQQ
RQQ
VQVQVQWWWW
ooo πεπεπε
Energy Density in Electrostatic Field
Step 4: Bring point charge, Q4 from infinity into the system. Requires work !!!!
Q1
Q2R21
Q3
R31
R32Q4 R41
R43
R42
![Page 105: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/105.jpg)
Energy Density in Electrostatic Field
( ) ( )
⎟⎟⎠
⎞⎜⎜⎝
⎛++
+⎟⎟⎠
⎞⎜⎜⎝
⎛+++=
++++++=+++=
43
34
42
24
41
14
32
23
31
13
21
12
434424414323313212
4321
444
4440
0
RQQ
RQQ
RQQ
RQQ
RQQ
RQQ
VQVQVQVQVQVQWWWWW
ooo
ooo
πεπεπε
πεπεπε
(1)
![Page 106: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/106.jpg)
Energy Density in Electrostatic Field
Notice that…
12112
21
21
12212 44
VQR
QQR
QQVQoo
===πεπε
By interchange the subscripts in (1), the following energy term can be obtained:
343242141232131121 VQVQVQVQVQVQW +++++=(2)
Hence, the average energy: ( ) ( )2
21 +
( ) ( )( ) ( ) ⎥
⎦
⎤⎢⎣
⎡+++++
++++++=
44342413343231
22423211141312
21
QVVVQVVVQVVVQVVV
W
![Page 107: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/107.jpg)
Energy Density in Electrostatic Field
It can be written that the total energy required:
( )
∑=
=
+++=
4
1
44332211
21
21
kkkVQ
VQVQVQVQW
In terms of continuous charge distribution:
ldVWline
l∫= ρ21 SdVW
surfaceS∫= ρ
21 vdVW
volumev∫= ρ
21
V is the potential at the charge distribution !!!
![Page 108: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/108.jpg)
Energy Density in Electrostatic Field
Alternatively; the previously obtained equations of energy can be written as: (Using vector identity)
( )dvEDWvolume
•= ∫ 21
The equation state that energy in the system of charges can be obtained if the electric field distribution (which is incurred by the charge itself) is known
![Page 109: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/109.jpg)
Example
A spherical charge distribution of radius ra and uniform ρv is centered at the origin. If the total charge is Q:
Find the energy needed to build up the charge system.
![Page 110: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/110.jpg)
Summary of Chapter 4
The students should be able to understand the followings:
(i) The concept of work and energy in electrostatic field
(ii) The concept of potential difference and absolute potential due to point charges and continuous charge system.
(iii) Able to apply the potential gradient concept in calculating the electric field at a specific point
(iv) Ability to calculate the stored energy in a electrical charge system
![Page 111: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/111.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) The concept of electric current
(ii) Conductors and conductivity
Please refer to Hayt and Buck, page 114-123
![Page 112: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/112.jpg)
Lecture #10
Topics to be covered:
(i) Electric Current
(ii) Conductors and conductivity
Reference: Hayt and Buck, page 114-123
Motivation:
To refresh the students understanding regarding the concept of electric
current, conductors and conductivity
![Page 113: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/113.jpg)
Electric Current
Current: Moving electric charges.
: Source of magnetostatic field. (Chapter 8)
Definition: Rate of movement of charge passing a given reference point/plane per second.
dtdQI = (Ampere)
Let us introduce the current density, . Unit of (A/m2) J
Q dS dI( )2/ mA
dSdIJJ ==
∫=∴surface
dsJI .
![Page 114: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/114.jpg)
x
y
z
Electric Current
ρv
dvdQ vρ=
yUU y ˆ=
From:dtdv
dtdQdI vρ==
dSdy
dtdydSvρ=
yU
dSU yvρ=yJ
( )2/mAUJ vρ=
In general:
Charge in motion constitutes a current
E
![Page 115: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/115.jpg)
Continuity of Current
Let us consider:
ρV ∫=volume
Ven dVQ ρ
Close surface
Rate of charge flow outwardly from the close surface current
dtdQI en−=
Q
Reduction of charge
Due to close surface, current flow outwardly:
∫ •=surface
dSJI
![Page 116: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/116.jpg)
Continuity of Current
It can be written:
dvdt
ddvdtd
dtdQdSJ
volume
v
volumev
en
surface∫∫∫ −=⎟
⎟⎠
⎞⎜⎜⎝
⎛−=−=•
ρρ
( )∫ ∫−=•∇volume volume
v dvdt
ddvJ ρDivergence
Theorem
dtdJ vρ−=•∇⇒ Continuity current
equation
Current per unit volume, emanating from a point equals the time rate decrease of volume charge density at the same
point
J
Will be used in the
study of conductor
![Page 117: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/117.jpg)
Conductors & Conductivity
Consider the atomic structure of conductor:
E
EqF e−=
The electron will moved with constant velocity, called drift velocity, dUThe electron drift velocity and the applied electric field are linearly related by the electron mobility, µe
EU ed µ−=
![Page 118: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/118.jpg)
Conductors & Conductivity
From relation between current density and charge velocity:
UJ vρ=
In conductor:EUJ eede µρρ −==
Conductivity;
Unit: Siemens per meter
σEJ σ=
Relation between induced current flow and applied electric field in conductors
![Page 119: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/119.jpg)
Conductor Properties in Electrostatic Field
E
conductor
What will happen to the free charge, ρv in
conductor due to applied electrostatic field ?
vρ
Consider the continuity current equation:
dtdJ vρ−=•∇
Due to applied electric field, current density will exist; EJ σ=
dtdE vρσ −=•∇∴ (1)
![Page 120: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/120.jpg)
Conductor Properties in Electrostatic Field
From: vD ρ=•∇ (Divergence)
01=+
dtd v
o
v ρσε
ρ
(1) Can be further written as:
0=+o
v
o
v
dtd
ερ
εσρ
PDE !!!
Solution will give:
( )t
vovoet⎟⎟⎠
⎞⎜⎜⎝
⎛−
= εσ
ρρ
Initial charge density at t= 0
⎟⎟⎠
⎞⎜⎜⎝
⎛=
o
rt
εσ1
Relaxation time constant
![Page 121: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/121.jpg)
Conductor Properties in Electrostatic Field
For bad conductor ( ↓ tr ↑ charge (ρv) decay slowly)
For good conductor ( ↑ tr ↓ charge (ρv) decay rapidly)
E
conductor
vρE
Sρ−Sρ+
0=vρ
0
0
=∴
=•∇
E
D
(inside)
![Page 122: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/122.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Conductor – Free Space (Boundary condition)
(ii) Resistance in Conductor
Please refer to Hayt and Buck, page 121-128
![Page 123: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/123.jpg)
Lecture #11
Topics to be covered:(i) Conductor – Free Space
(Boundary condition)
(ii) Resistance in Conductor
Reference: Hayt and Buck, page 121-128
Motivation:
To enable the students to understand the concept of boundary condition and to calculate the resistance in conductor
![Page 124: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/124.jpg)
Boundary Conditions
Consider heat flow (thermodynamics…)
conductor
heater
air at 27oC
To calculate the temperature at conductor-air boundary, need to use the boundary conditions.
Boundary conditions: Essential in finding physical quantities (temperature, electric field, magnetic field, etc..) if two different materials are in contact.
![Page 125: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/125.jpg)
Boundary Conditions (Conductor – Free Space)
Let us consider conductor in free space:
conductor
Free space
E
What is the resultant electric field at the conductor-free space boundaries if we apply an external electric field ???
Consider the upper boundary:
#2 (conductor)
#1 (free space)
2E
1E
tE 2
tE1
nE 2
nE1
![Page 126: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/126.jpg)
Boundary Conditions (Conductor – Free Space)
(1) Consider the normal component:
#1
#2
nE1
nE 2
Relation between & ? nE1 nE2
Use Gauss’s Law
ensurface
QdSD =•∫
ρS
o
SnE
ερ
=1
(1) Consider the tangential component:
tE1
tE 2
#1
#2
Relation between & ? tE1 tE2
Use conservation of electric field
∫ =•loop
dlE 0
a b
cd 01 =tE
![Page 127: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/127.jpg)
Boundary Conditions (Conductor – Free Space)
From previous slide:
( )mVn
EEE
o
S
tn
/ˆ
111
ερ
=
+=
In general:
conductor
free space
E
![Page 128: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/128.jpg)
Example 1: Skitek
At a point on a conductor-free space boundary,
Find: (a) ρS at the point on the boundary (b) at the boundary.
( )mVyxE /ˆ3ˆ2 +=
D
Example 2: D5.5 (Hayt, pg 128)
Given the potential field in free space, V = 100 sinh 5x sin 5y V and a point P(0.1,0.2,0.3). Find at P: (a) V (b) (c) ρS if it is known that P lies on a conductor surface.
E
![Page 129: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/129.jpg)
Resistance in Conductor
R
How to calculate the resistance for the conductor ???
aa b
I
( )Ω=I
VR ab
l
J
E
y
( )ASE
dSE
dSJI
y
surface
surface
σ
σ
=
•=
•=
∫
∫ lEdlEV y
a
bab ∫ =•−=
SlRσ
=∴Conductor with uniform cross section
![Page 130: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/130.jpg)
Resistance in ConductorFor conductor with non-uniform cross section:
∫
∫
∫
∫•
•−=
•
•−==
surface
a
b
surface
a
bab
dSE
dlE
dSJ
dlE
IVR
σ
I
ab
J
E
![Page 131: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/131.jpg)
Example 1: Skitek
Find the resistance between the =0 and = π/2 surfaces of the truncated wedge section shown below.
Given, = 4x10-7 S/m and V/m
φ φ
( )φ1−=
rE
x
y
z0.9 m0.1 m
1 m
![Page 132: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/132.jpg)
Example 2: Skitek
For the truncated wedge of example 1, find the resistance between faces at z = 0 and z = c , when the inner radius is ra and the outer radius is rb.
Example 3: Skitek
For the truncated wedge of example 1, find the resistance between the curved faces at radius of ra and that at a radius of rb, where rb > ra and the length in the z direction is c meter.
![Page 133: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/133.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Dielectrics
(ii) Polarization in Dielectrics
Please refer to Hayt and Buck, page 136-143
![Page 134: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/134.jpg)
Lecture #12
Topics to be covered:(i) Dielectrics(ii) Polarization in Dielectrics
Reference: Hayt and Buck, page 136-143
![Page 135: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/135.jpg)
Objectives
1) To understand the concept of dielectric material
2) To investigate the effect of applied electric field to the dielectric material Polarization
3) To understand the concept of bound charge densities in dielectric due to polarization
4) To investigate the effect of polarization on the propagating electric fields in dielectric material
![Page 136: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/136.jpg)
Dielectric
Previously, we learn about conductors free charges to produce conduction current, J=E
Dielectrics or insulators differ from conductors no free charges and charges are confined/bounded to molecular structure. Hence very small value of . For example, glass, quartz, polymer, etc…
+ve
Bound charges
Atomic structure of dielectric
![Page 137: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/137.jpg)
Polarization in Dielectric Material
Dielectric
Macrosopic view Microscopic view0=aE
+ve
No effect on atomic structure
![Page 138: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/138.jpg)
Polarization in Dielectric Material
DielectricMacrosopic view
0≠aE⊕
-⊕
-
⊕
-⊕
-
⊕
-⊕
-⊕
-
+ve
⇔⊕-
Microsopic view
Q
( )CmdQp =dipole moment 0≠aE
0≠aE-Q
d
pnP =
Electric polarization vector
![Page 139: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/139.jpg)
Bound Charge Densities
0≠aE
Consider the dielectric being polarized by the application of external field
Dipole moment will appear and thus the polarization vector
⊕-
⊕-
⊕-
⊕-⊕-⊕-
⊕-⊕-⊕-
⊕-⊕-⊕-
⊕-⊕-⊕-
⊕⊕⊕⊕⊕
⊕⊕⊕ ⊕
Two type of bound charges appear:
P
Bound surface charge density, ρsb
sbρ+
sbρ−
( )2m/CnPsb •=ρ
vbρBound volume charge density, ρvb
( )3m/CPvb •−∇=ρ
![Page 140: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/140.jpg)
Effect of Polarization on Fields
From previous, we have identify the existence of bound surface charge density, ρsb and bound volume charge density, ρvb due to polarization.
Let us apply the Maxwell’s equation in polarized dielectric to find the electric field.
From: vo ED ρε =•∇=•∇
Due to existence of ρvb: ( )vbvo E ρρε +=•∇
Free charge density
From definition of ρvb: ( )PE vo •∇−=•∇ ρε
Further manipulation:vo PE ρε =•∇+•∇
Hence: PED o += ε
![Page 141: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/141.jpg)
Effect of Polarization on Fields
Previously, in free space:
PED o += ε
ED oε=Presently, in polarized dielectric:
Alternatively, it can be written as:
EED ro εεε ==Polarization vector is eliminated by introducing εr
Relative permittivity of dielectric
Depending on type of dielectric. For example:
εr (air)=1.0006
εr (glass) =6.0
![Page 142: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/142.jpg)
Example: Skitek
An ungrounded spherical configuration of concentric spherical dielectric shells, enclosed by a conductor shell, is shown below. Regions 1 and 3 are free space, region 2 is a dielectric whose relative permittivity is εr1and region 4 is a conductor. If a charge Q is placed at the center, find (a) D in all region (b) E in all region (c) P in all region (d) ρS on the conductor surface (e) ρsb on the dielectric surface (f) ρvb within the dielectric
a
b
c
d
#4
#3
#2
#1
![Page 143: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/143.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Boundary Conditions (Dielectric-Dielectric)
(ii) Capacitance
Please refer to Hayt and Buck, page 143-159
![Page 144: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/144.jpg)
Lecture #13
Topics to be covered:
(i) Boundary Conditions (dielectric-dielectric)(ii) Capacitance
Reference: Hayt and Buck, page 143-159
![Page 145: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/145.jpg)
Objectives
1) To understand the concept of boundary conditions between dielectrics
2) To investigate the fundamental aspects of capacitance and to calculate the capacitance for a given structure
![Page 146: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/146.jpg)
Boundary Conditions (Dielectric-Dielectric)
Let us consider two bounded dielectrics :
What is the resultant electric field at the dielectrics boundary if we apply an external electric field ???
Consider the upper boundary: Assume surface charge, ρS at the boundary
2E
1E
tE 2
tE1
nE 2
nE1
#2 (Dielectric 2), ε2
#1 (Dielectric 1), ε1
ρS
Dielectric 2E
Dielectric 1
![Page 147: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/147.jpg)
Boundary Conditions (Dielectric-Dielectric)
(1) Consider the normal component:
#1
#2
nE1
nE 2
Relation between & ? nE1 nE2
Use Gauss’s LawρSen
surface
QdSD =•∫
Snn EE ρεε =− 2211
(1) Consider the tangential component:
tE1
tE 2
#1
#2
tE1 tE2Relation between & ?
Use conservation of electric field
a b
cd∫ =•
loop
dlE 0 tt EE 21 =
![Page 148: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/148.jpg)
Example 1: Skitek
In the region y>0, we find εr1=4, and in the region y<0, we find εr2=3. If
at the boundary, find:
(a)
(b)
(c)
(d)
(e)
(f) ρsb
Assume that ρS =0 at the boundary
( )m/VzE 101 =
1D
2E2D1P
2P
![Page 149: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/149.jpg)
Example 2: Skitek
A boundary between two dielectrics is found at x=0 plane. If material 1 exists for x>0 with εr1=4 and material 2 exists for x<0 with εr2=7, and when (at boundary), find:
(a)
(b)
(c)
(d)
(e)
(f) ρsb
Assume that ρS =0 at the boundary
( )m/VzyxE 6321 −+=
1D1P2E
2D
2P
![Page 150: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/150.jpg)
Example 3: Skitek
Region 4x+3y >10 consists of a dielectric material with permittivity ε1 and region 4x+3y<10 is consists pf dielectric material with permittivity ε2. At boundary, the following electric field is recorded:
( )mVzyxE /ˆ5ˆ7ˆ21 +−=
Obtain and ρsb at the boundary. Assume ρS =0 at the boundary.
2211 ,,, PDPD
![Page 151: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/151.jpg)
Capacitance
++++
++++
+++
+ ++
----
----
--- -- -
-
Conductor a
Conductor b
Dielectric, ε
E
Capacitance of a two conductor capacitor is defined as the ratio of magnitude of charge on one of the conductors to the magnitude of potential difference between the conductors.
( )FaradVQ
Cab
=
Vab∫=+ dSQ Sρ ∫=− dSQ Sρ
Sρ+ Sρ−
![Page 152: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/152.jpg)
Capacitance
From:abV
QC =
By definition:
∫∫
•−=
a
b
S
dlE
dSC
ρ
Or:
∫∫
•−
•=
a
bdlE
dSEC
ε
(1)
(2)
(1) or (2) can be used to calculate the capacitance for any given capacitor structure.
![Page 153: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/153.jpg)
Example 1: Skitek
Calculate the capacitance of two concentric metallic spheres separated by a dielectric with permittivity ε. Let rbbe the inner radius of the outer sphere and ra be the outer radius of the inner sphere.
Example 2: Skitek
Find the capacitance of an L length coaxial capacitor shown below.
Conductor a
Conductor b
ε
rb
ra
![Page 154: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/154.jpg)
Example 3: Skitek
Find the expression for the capacitance permeter length of a cylindrical capacitor whose cross section is given below.
a
b
c
d
#4
#3
#2
#1
#1: conductor
#2: dielectric, ε2=6εo
#3: free space
#4: conductor
![Page 155: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/155.jpg)
End of Chapter 5
Thank you
Please recap the objectives stated in each lecture to ensure that you fully understood the topics.
![Page 156: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/156.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Uniqueness Theorem
(ii) Laplace’s and Poisson Equations
Please refer to Hayt and Buck, page 172-188
![Page 157: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/157.jpg)
Lecture #14
Topics to be covered:
(i) Uniqueness Theorem(ii) Laplace’s and Poisson’s Equations
Reference: Hayt and Buck, page 172-188
![Page 158: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/158.jpg)
Objectives
1. To understand the concept of uniqueness theorem
2. To calculate the electric potential/electric field at a given point using the solution of Poisson’s and Laplace’s equations
![Page 159: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/159.jpg)
Methods to find Electric Field
Electric FieldCharge Distribution
Coulomb’s Law
Gauss’s Law
Electric Potential
Potential Gradient∫= r
dQVπε4
Uniqueness Theorem
Boundary Condition
Area Properties
![Page 160: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/160.jpg)
Uniqueness Theorem
Solution for electrostatic problem (electric potential) can be unique for a specified region if uniqueness theorem is obeyed.
Potential, V
Boundary Conditions Area properties
1. Poisson’s Equation
2. Laplace’sEquation
![Page 161: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/161.jpg)
Poisson’s & Laplace’s Equation
From Maxwell’s equation:
v
v
v
E
E
D
ρε
ρε
ρ
=•∇
=•∇
=•∇
Consider homogeneous material
( ) vV ρε =∇−•∇
Laplacianoperator
(coordinate dependence)
Poisson’s
When ρv=0: 02 =∇ V Laplace’s
ερ vV −=∇ 2
![Page 162: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/162.jpg)
Solution of Poisson’s and Laplace’s Equation
Electric potential, V can be obtained by solving the Laplace’s and Poisson’s equations.
For example, for Laplace’s equation:
0
0
2
2
2
2
2
2
2
=∂∂
+∂∂
+∂∂
=∇
zV
yV
xVV
3-dimensions
But, we only interested in solving a 1-dimensional problem
easier and less complicated.
000 2
2
2
2
2
2
=∂∂
=∂∂
=∂∂
zV@
yV@
xV
![Page 163: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/163.jpg)
Solution of Poisson’s and Laplace’s Equation
For instance; V only varied in x direction:
So, we choose only:02
2
=∂∂
xV
AxV=
∂∂
⇒1st integration
2nd integration BAxV +=⇒
Variables (A and B) can be solved by using the given boundary conditions
![Page 164: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/164.jpg)
Example: Skitek
A parallel plate capacitor has a separation of 0.5mm between plates and a potential difference between plates of 50V. If ρv =0 and ε=4εo between plates, find:
(a) V(y) for 0≤y≤0.5mm if the potential at y=0 is 25 V and at at y=0.5 mm is 75 V.
(b)Electric field between plates
(c) Capacitance per square meter
![Page 165: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/165.jpg)
Example: Skitek
Two infinite length, concentric and conducting cylinders of radius ra=0.02 m and rb=0.05 m are located with axes on the z-axis. If ε=4εo, ρv =0 between the cylinders, V=50 V at ra, V=100 V at rb, find:
(a) V in the range 0.02≤r≤0.05
(b)Electric field intensity
(c) Electric flux density
(d)ρs at rb
(e) Capacitance per meter length
![Page 166: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/166.jpg)
End of Chapter 6
&
End of Electrostatics Topics
![Page 167: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/167.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Magnetostatics Field and Sources
(ii) Biot-Savart’s Law
Please refer to Hayt and Buck, page 210-218
![Page 168: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/168.jpg)
Lecture #15
Topics to be covered:
(i) Magnetostatic Field Intensity and Field Sources
(ii) Biot-Savart’s Law
Reference: Hayt and Buck, page 210-218
![Page 169: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/169.jpg)
Objectives
i) To understand the concept of magnetostatic field intensity
ii) To learn about the source of magnetostatic field intensity
iii) To calculate the magnetostatic field intensity using the Biot Savart’s law
![Page 170: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/170.jpg)
Magnetic (Magnetostatic) Field Intensity
Magneto + static
Magnetic field intensity source
Symbol of . Unit of Ampere/meter (A/m).
Field sources: Steady current.
Type of field sources: (i) Filament current
(ii) Surface current
(iii) Volume current
H
![Page 171: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/171.jpg)
Filament Current
I
dl Filamentary current element: dlI
Surface Current
sJ
dSSurface current element: dSJS
Surface current density : unit (A/m)
(A.m)
(A.m)
![Page 172: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/172.jpg)
Volume Current
JVolume current element:
dvJ
dv
Those elements (filament, surface and volume) will create magnetic field.
But, how ???
(A.m)
volume current density : unit (A/m2)
![Page 173: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/173.jpg)
Recall
Previously; in electric field calculation
Charge density; Electric fieldCoulomb’s Law
vSlQ ρρρ ,,,
Current density; JJI S ,,
Similarly, in magnetic field calculation
Magnetic fieldBiot-Savart’s
Law
![Page 174: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/174.jpg)
Biot-Savart’s Law
The law was co-originated by Felix Savart, a professor at College de France and Jean Baptiste Biot, a French physicist in 1820.
I
R
Observations:
rradiuszI
H
ˆˆ
ˆ
→→→ φ
2
1R
H
IH
∝
∝
![Page 175: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/175.jpg)
Biot-Savart’s Law
Hence, Biot-Savart’s Law can be stated as:
)/(4
ˆ
,2 mA
RadlIH
llength
R∫×
=π
(filament current)
)/(4
ˆ
,2 mA
RdSaJH
Ssurface
RS∫×
=π
)/(4
ˆ
,2 mA
RdVaJH
Vvolume
R∫×
=π
(surface current)
(volume current)
![Page 176: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/176.jpg)
Biot-Savart’s Law
I
B
At any point, let B:
dl
R
Ra
)/(4
ˆ
,2 mA
RadlIH
llength
R∫×
=π
Consider a filamentary current;
![Page 177: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/177.jpg)
Biot-Savart’s Law-Filamentary Current
Consider a finite length of filamentary current:
)',,( zr φ
y
x
z
φ
z’
r
Step 3:
Integrate over filament current length to get total H
Rdl
Step 1:Select current element
(0,0,z)
a
b
Step 2:
Identify dH
Hd
I
![Page 178: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/178.jpg)
Biot-Savart’s Law-Filamentary Current
Step 1: Current element dlI
Step 2: Identify dH
24ˆ
RadlIHd R
π×
=zdzdl ˆ=
( )( ) rrzzzR ˆˆ' +−−=Hence,
( )( )2322 '4
ˆ
zzr
IrdzHd−+
=π
φ
Using:
( ) ( )∫+
=+ 2
12222
322 xcc
x
xc
dx
![Page 179: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/179.jpg)
Biot-Savart’s Law-Filamentary Current
Step 3:
( )( ) ( )( )φ
πˆ
'
'
'
'4 2
1222
122 ⎪⎭
⎪⎬⎫
⎪⎩
⎪⎨⎧
−+
−−
−+
−=
zar
za
zbr
zbr
IH
Alternatively:
( ) )/(ˆsinsin4 21 mA
rIH φααπ
+=1α
2αFor infinite length; ( )mAr
IH /ˆ2
φπ
=
r
![Page 180: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/180.jpg)
Example 1
Consider AB in figure below as part of an electric circuit. Find H at the origin due to AB.
x
y
1
1 A
B
6 A
0
Example 2A square conducting loop of side 2a lies in the z=0 plane and carries a current I in the counterclockwise direction. Find a magnetic field intensity at center of the loop.
![Page 181: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/181.jpg)
Example 3
An infinitely long conductor is bent into an L shape as shown in figure below. If a direct current of 5 A flows in the conductor, find the magnetic field intensity at (a) (2,2,0), (b) (0,0,2)
x
y
5 A0
5 A
Example 4The y and z axes, respectively, carry filamentary currents 10 A along and 20 A along . Find H at (-3,4,5).
y z−
![Page 182: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/182.jpg)
Example 5
Find the expression for the H field along the axis of the circular current loop (radius of a), carrying a current I.
![Page 183: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/183.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Ampere’s Circuital Law
Please refer to Hayt and Buck, page 218-225
![Page 184: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/184.jpg)
Lecture #16
Topics to be covered:
(i) Ampere’s Circuital Law
Reference: Hayt and Buck, page 218-225
Motivation:
To understand the concept of Ampere’s Circuital Law and its
application in calculating magnetic field
![Page 185: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/185.jpg)
Ampere’s Circuital Law (ACL)
Discovered by Andre-Marie Ampere, a French physicist in 1800s.
Analogous to Gauss’s Law.
Gauss’s Law Electric fieldSpecial case of charge distribution
Magnetic fieldSpecial case of current distribution Ampere’s
Circuital Law
![Page 186: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/186.jpg)
Ampere’s Circuital Law (ACL)
Amperian loopGaussian surface
Infinite length of filament current
Infinite surface current
Infinite length of line charge
Infinite surface charge
Ampere’s Circuital LawGauss’s Law
∫ =
surfaceGaussian
enQdsD . ∫ =
loopAmperian
enIdlH .
![Page 187: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/187.jpg)
Ampere’s Circuital Law- Filament current
I
z Step 1: Create an amperian loop (closed loop that surround the filament current)
Step 2: Identify the loop element, dl
Step 3: Use the ACL to find the magnetic field
∫ =
loopAmperian
enIdlH .
dl
∞+
∞−
![Page 188: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/188.jpg)
Ampere’s Circuital Law- Filament current
From previous slide;
φφ ˆHH = φφ ˆrddl = IIen =
Hence:
)/(ˆ2
2
ˆ.ˆ
.
mAr
IH
rIH
IrdH
IdlH en
φπ
π
φφφ
φ
φ
=
=
=
=
∫∫
As proved from B-S Law
![Page 189: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/189.jpg)
Ampere’s Circuital Law- Surface Current
yx
z
yJJ SS ˆ=
Step 1: Create an amperian loop
Step 2: Identify the loop element
Step 3: Use the ACL
( )xdx ˆ−
( )xdx ˆ ( )zdz ˆ
( )zdz ˆ−
1
2
3
4
![Page 190: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/190.jpg)
Ampere’s Circuital Law- Surface Current
From previous slide;
( )
( ) ( ) ( )
)/(ˆ21
2
2
ˆ.ˆˆ.ˆ
ˆ.ˆˆ.ˆ
.
1
4
4
3
3
2
2
1
mAnJHJH
JH
LJzdzxHxdxxH
zdzxHxdxxH
IdlH
Ss
x
sx
sxx
xx
en
×=∴=⇒
=⇒
=−+−−
+−+⇒
=⇒
∫∫
∫∫
∫
![Page 191: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/191.jpg)
Example 1
Plane x=10 carries current 100mA/m along while line x=1, y=-2 carries filamentary current 20π mA along . Determine at (4,3,2).
zz
H
Example 2
An infinitely long solid conductor of radius a is placed along the z-axis. If the conductor carries current I in the direction, show that:
φπ
ˆa
IrH 22=
z
![Page 192: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/192.jpg)
Example 3
Through the use of Ampere’s Circuital Law, find the field in all regions of an infinite length coaxial cable carrying a uniform and equal current I in opposite directions in the inner and outer conductors. Assume the inner conductor to have a radius of a (m) and the outer conductor to have an inner radius of b (m) and an outer radius of c (m). Assume that the cable’s axis is along the z axis.
H
Example 4
Through the use of Ampere’s Circuital Law, find the field inside and outside an infinite-length hollow conducting tube whose radius is 0.002 m that carries a current I = 10-7 A, directed in the direction. Consider the thickness of the tube very small.
H
z+
![Page 193: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/193.jpg)
Example 5
Consider two wire transmission line whose cross section is illustrated in figure below. Each wire is of radius 2 cm and the wires are separated by 10 cm. The wire centered at (0,0) carries current 5 A in the direction of , while the other centered at (10cm,0) carries the return current. Find at: (5cm, 0) and (10cm, 5 cm)
z+
H
x
y
10 cm
![Page 194: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/194.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Stokes’ Theorem
(ii) Magnetic Flux Density
(iii) Maxwell’s equation for static field
(iv) Vector Magnetic Potential
Please refer to Hayt and Buck, page 225-246
![Page 195: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/195.jpg)
Lecture #17
Topics to be covered:(i) Stokes’ Theorem
(ii) Magnetic Flux Density
(iii) Maxwell’s equation for static field
(iv) Vector Magnetic Potential
Reference: Hayt and Buck, page 225-246
Motivation:
To understand the concept of magnetic flux density and magnetic potential
![Page 196: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/196.jpg)
Recall…In electrostatic field analysis:
Divergence Theorem ∫ ∫∇=surface volume
dvD.dS.DGauss’s Law
∫ =surface
enQdS.D
Stokes’ Theorem
Ampere’s Circuital Law
enloop
Idl.H =∫ ( )∫ ∫ ×∇=loop surface
dS.Hdl.H
In magnetostatic field analysis:Another form of GL
Another form of ACL
Details on the curl operator: Hayt and Buck, page 225-232
![Page 197: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/197.jpg)
Magnetic Flux and Flux Density
Electric Flux Density,
Electric Flux, ψE
Unit: Coulomb
Electrostatic field
D
∫=surface
E dS.Dψ
ensurface
E QdS.D == ∫ψ
Magnetic Flux Density,
Magnetic Flux, ψM
Unit: Weber
Magnetostatic field
B
∫=surface
M dS.Bψ
0== ∫surface
M dS.Bψ
ED oε= HB oµ=
µo : magnetic permeability (free space). 4π × 10-7 (H/m)
![Page 198: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/198.jpg)
Example
Determine the magnetic flux through a rectangular loop (a × b) due to an infinitely long conductor carrying current I as shown below. The loop and the straight conductors are separated by a distance d.
z
d a
bI
![Page 199: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/199.jpg)
Example: D8.7 (Hayt)
A solid conductor of circular cross section is made of a homogeneous nonmagnetic material. If the radius a = 1mm, the conductor axis lies on the z axis, and the total current in the direction is 20A, find:
(a) H at r=0.5 mm
(b) B at r=0.8 mm
(c) The total magnetic flux perunit length inside the conductor
(d) The total flux for r < 0.5 mm
(e) The total magnetic flux outside the conductor.
z
![Page 200: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/200.jpg)
Maxwell’s Equations for Static Field
Electrostatic Field Magnetostatic Field
∫ ∫∫ ===∇surface volume
venvolume
dvQdS.DdvD. ρ
vD. ρ=∇ Point form
( ) 0==∇ ∫∫loopsurface
dl.EdS.E.
0=×∇ E Point form
( ) ∫ ∫∫ ===×∇loop surface
ensurface
dS.JIdl.HdS.H
JH =×∇ Point form
( ) 0==∇ ∫∫surfacevolume
dS.BdvB.
0=∇ B. Point form
The equations describe the relationship between electric field, magnetic field, static charges and steady current. For time-varying field, the equations distinct in certain aspects.
![Page 201: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/201.jpg)
Example: D 8.5 (Hayt)
Calculate the value of current density:
(a) In rectangular coordinates at (2,3,4) if
(b) In cylindrical coordinates at (1.5, 90o, 0.5) if
(c) In spherical coordinates at (2, 30o, 20o) if
zxyyzxH 22 −=
( )r.cosr
H φ202=
θθ
ˆsin
H 1=
![Page 202: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/202.jpg)
In electrostatic field analysis:
Vector Magnetic Potential
VE −∇=Charge Distribution
Electric Potential, V
Similarly, in magnetostatic field analysis:
Magnetic Potential, A AB ×∇=
From: (Maxwell’s) and (identity) 0. =∇ B ( ) 0. =×∇∇ A
Current Distribution
How ???
![Page 203: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/203.jpg)
Vector Magnetic PotentialCaution: Mathematical derivation starts here
From Maxwell’s; JH =×∇
( ) JA
JB
o
o
µ
µ
=×∇×∇⇒
=×∇⇒
From the vector identity: ( ) ( )AAA ×∇×∇−∇∇=∇ .2
By simplifying: 0. =∇ A
JA oµ−=∇⇒ 2(Vector Poisson’s Equation) Recall: (PE)
∫=volume
v
o RdvV ρ
πε41
o
vVερ
−=∇ 2
Hence:
∫=volume
o
RdvJA
πµ4
(Wb/m)
![Page 204: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/204.jpg)
Vector Magnetic Potential
In general;
Volume current
Surface current
Filament current
∫=volume
o
RdvJA
πµ4
(Wb/m)
∫=surface
So
RdSJA
πµ4
(Wb/m)
∫=line
o
RdlIA
πµ4
(Wb/m)
![Page 205: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/205.jpg)
Example 1: Skitek
A conductor of radius a carries a uniform current with . Show that the magnetic vector potential for r < a is:
zJJ o ˆ=
Example 2: Skitek
( )mWbzrJA oo /ˆ41 2µ−=
Find for an infinite line of current and derive the field from that current.
A H
![Page 206: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/206.jpg)
Example 3: Skitek
For the filamentary circular current loop carrying current I, with radius a at z=0, find the (a) the vector magnetic potential, (b) through the use of ; along the axis of the current loop.
A B A
Example 4: D 8.9 (Hayt)
The magnetic vector potential of a current distribution in free space is given by:
Find H at (3, π/4, -10). Calculate the flux through r =5,
0 ≤Φ ≤ π/2, 0 ≤ z ≤10.
( )mWbzeA r /ˆsin15 φ−=
![Page 207: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/207.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Magnetic Forces
(ii) Magnetic Material
Please refer to Hayt and Buck, page 259-281
![Page 208: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/208.jpg)
Lecture #18
Topics to be covered:(i) Magnetic Forces
(ii) Lorentz Force Equation
Reference: Hayt and Buck, page 259-273
Motivation:
To demonstrate the force exerted by the magnetic field and to understand the nature
and application of Lorentz force equation
![Page 209: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/209.jpg)
Recall…
In electrostatic field;
EQ
Exerted force;
EQF = (N)
Now, in magnetostatic field;
B I
Exerted force; dl
BdlIFd ×=
![Page 210: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/210.jpg)
Magnetic Forces-Current Elements
Let two infinite and parallel filament current-carrying conductors:
x
y
z
d
I2
I1
Find force per unit length between the two conductors ???dl2
Force experienced by dl2:
1222 BdlIFd ×=
( ) ( )xdIzdzIFd o −×−=πµ2
122
( )m/NydII
dzFd o
πµ2
21=
![Page 211: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/211.jpg)
Magnetic Forces-Current Elements
Similarly; from the previous equation:
BdSJFd s ×=
Force on a surface currentBdVJFd ×=Force on a volume current
BdlIFd ×=Force on a filament current
![Page 212: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/212.jpg)
Example 1A rectangular loop carrying current I2 is placed parallel to an infinitely long filamentary wire carrying current, I1 as shown. Find the force experienced by the loop.
I1
I2
ro a
b
x
z
Example 2
A current element of length 2 cm is located at the origin in free space and carries current 12 mA along . A filamentary current of 15 is located along x =3, y =4. Find the force on the current element.
xz
![Page 213: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/213.jpg)
Example 3
A three phase transmission line consists of three conductors that are supported at points A, B and C to form an equilateral triangle as shown below. At one instant, conductors A and B both carry a current of 75 A while conductor C carries a return current of 150 A. Find the force per meter on conductor C at that instant.
A
BC
x
y
2 m
![Page 214: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/214.jpg)
Force on Moving Point Charge
Consider a volume current distribution, JCurrent – Moving point charges
Relation between volume current distribution and charge velocity, (chapter 5) U
UJ Vρ= (1)
Previously, magnetic force on volume current distribution:
BdvJFd ×= (2)
From (1) and (2):
( )BUdQ
BUdvFd v
×=
×= ρ
(3)
Magnetic force on moving charges
Extension from volume current to moving point charge
![Page 215: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/215.jpg)
Force on Moving Point Charge
Equation (3) is a fundamental equation for working principle of electric motors and electric generators.
B
U
( )BUqF e ×=
B
B
conductor
B
a
baF U
BU ×
( )BUqe ×
![Page 216: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/216.jpg)
Lorentz Force Equation
When the charge is immersed in combined and fields, the combined force becomes
E B
BUdQEdQFd ×+= (N)
![Page 217: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/217.jpg)
Example: D 9.1 (Hayt)
The point charge, Q=18 nC has a velocity 0f 5×106 m/s in the direction . Calculate the magnitude of the force exerted on the charge by the field:
z.y.x. 300750600 ++
mTzyxB 643 ++−=(a)
(b) m/kVzyxE 643 ++−=(c) and acting together.B E
![Page 218: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/218.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Magnetic Material
(ii) Magnetic Boundary Conditions
Please refer to Hayt and Buck, page 273-290
![Page 219: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/219.jpg)
Lecture #19
Topics to be covered:(i) Magnetic Material
(ii) Magnetic Boundary Condition
Reference: Hayt and Buck, page 273-290
![Page 220: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/220.jpg)
Objectives
1. To understand the concept of magnetic polarization; i.e: the effect of atomic orientation due to applied magnetic field
2. To investigate on the bound magnetization current in polarized material
3. To investigate the effect of magnetic polarization to the resultant magnetic field in the material
4. To understand the concept of boundary condition between two magnetic materials
![Page 221: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/221.jpg)
Magnetic Polarization
Magnetic material
0=B
Macroscopic view
0==∑mM
Magnetization vector (A/m)
(i) Dipole moment randomly oriented
(ii) Total dipole moment
From macroscopic view; :0=B
Microscopic view
Magnetic dipole
moment
Bound current due to electron movement
mI
![Page 222: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/222.jpg)
Magnetic Polarization
Characteristics of dipole moment will determine type of magnetic materials:
(i) Diamagnetic
(ii) Paramagnetic
(iii)Ferromagnetic
(iv)Antiferromagnetic
(v) Ferrimagnetic
(vi)Superparamagnetic
*Interested readers: please refer to page 274-276
![Page 223: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/223.jpg)
Magnetic Polarization
Magnetic material
0≠B
Macroscopic view
(i) Orientation of dipole moment according to the magnetic field direction (polarized)
(ii) Total dipole moment
From macroscopic view; :
0≠=∑mM
0≠B
0≠=∑mM
![Page 224: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/224.jpg)
Bound Magnetization Current
0≠BM
Im
Bound magnetization surface current density (on surface)
( )mAnMJ sm /ˆ×=
Bound magnetization current density (within the material)
( )2/ mAMJ m ×∇=
![Page 225: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/225.jpg)
Example 1: Skitek
A long cylinder of magnetic material of radius a (m) is found along the z axis. When the magnetization, within the cylinder, find (a) (b) at r = a on the magnetic material surface.
)/(ˆ10 mAzM =
mJ smJ
Example 2: Skitek
A long bar of magnetic material is found parallel to the y axis with its cross section defined by 0 ≤ x ≤ 0.1 and 0 ≤ z ≤0.2. If , find (a) within the material (b) on the four surfaces (c) total bound current that flows through a cross section of the bar at z = 0.1 plane for a length of 1 meter in the y direction.
)/(ˆ3 mAyxM = mJ smJ
![Page 226: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/226.jpg)
Effect of Magnetization on Magnetic Fields
(Recall) From free space condition:
JB
o
=×∇µ
mJIn magnetic material, need to include (due to magnetization)
( )m
o
JJB+=×∇∴
µ
From ;MJm ×∇=
( )MJB
o
×∇+=×∇µ
![Page 227: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/227.jpg)
Effect of Magnetization on Magnetic Fields
Further manipulation:
JMB
o
=⎟⎟⎠
⎞⎜⎜⎝
⎛−×∇
µ
MBHo
−=⇒µ
( )( )2m/WbHH
MHB
ro
o
µµµ
µ
==
+=⇒
rµ : magnetic permeability of the material
![Page 228: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/228.jpg)
Example
In certain material for which µ=6.5µo,
( )m/AzyxH 402510 −+=Find:
The magnetic flux density and magnetization
![Page 229: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/229.jpg)
Boundary Conditions (Two magnetic materials)
Let us consider two magnetic materials:
H
Magnetic material 1, µ1
Magnetic material 2, µ2
What is the resultant magnetic field at the boundary if we apply an external magnetic field ???
2H
1H
tH 2
nH 2
tH 1nH 1
Consider the boundary: Assume surface current in inwards direction (current due to free charges)
sJ
Magnetic material 2
Magnetic material 1
sJ⊗⊗⊗⊗⊗ ⊗
![Page 230: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/230.jpg)
Boundary Conditions (Two Magnetic Materials)
(1) Consider the normal component:
#1, µ1
#2, µ2
nH 1
nH 2
Relation between & ? nH1 nH2
Use Gauss’s Law for magnetic field
0=•∫surface
dSBnn BB 21 =
(1) Consider the tangential component:
tH 1
tH 2
#1
#2
Relation between & ? tH1 tH2
Use Ampere’s Circuital Lawa b
cd ∫ =•loop
enIdlH
stt JHH =− 21
⊗⊗ ⊗⊗⊗⊗⊗⊗ ⊗
sJ
l∆
![Page 231: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/231.jpg)
Boundary Conditions (Two Magnetic Materials)
HB µ=From:
The boundary conditions can be further written as:
nn HH 2211 µµ = Normal component
stt JBB=−
2
2
1
1
µµTangential component
![Page 232: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/232.jpg)
Example
The interface 2x+y=8 between two media carries no current. If medium 1 (2x+y≥8) is nonmagnetic with:
( )m/AzyxH −+−= 341
Find:
(a) The magnetic energy density in medium #1
(b) and in medium 2, 2x+y≤8, with µ2=10µo
(c) The angles and make with the normal to the interface
2M 2B1H 2H
![Page 233: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/233.jpg)
Next Lecture
Please have a preliminary observation on the following topics:
(i) Time Varying Fields
(ii) Faraday’s Law
(iii) Displacement Current
Please refer to Hayt and Buck, page 306-313
![Page 234: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/234.jpg)
Lecture #20
Topics to be covered:(i) Time Varying Field
(ii) Faraday’s Law
Reference: Hayt and Buck, page 306-312
![Page 235: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/235.jpg)
Objectives
1. To identify the difference between the static field (electric and magnetic field) with the time varying field.
2. To exhibit the phenomena whereby the current is produced by the time varying magnetic field, i.e: Faraday’s Law.
3. To investigate on the changes of Maxwell’s equation for time varying field (due to Faraday’s Law).
![Page 236: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/236.jpg)
Time Varying Field
Previously;
( ) ( )11111111 ,,,,, zyxHzyxE
Now;
( ) ( )tzyxHtzyxE ,,,,,,, 11111111
* Field at these points will also change with time, t
Field Source
Field Source
![Page 237: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/237.jpg)
Time Varying Field
Two important issues in time varying fields:
Faraday’s Law Displacement Current
Modification of Maxwell’s Equation
![Page 238: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/238.jpg)
Faraday’s Law
Basic discussion on time varying field will be based on Faraday’s Law.
Faraday’s Law: Generation of electric current due to time varying magnetic field. Discovered by Michael Faraday in 1831 after 10 years of scientific research.
+-
Flux linkageLoop
Galvanometer Battery
![Page 239: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/239.jpg)
Faraday’s Law
From the experiment, three observations have been deduced by Faraday.
1) When the battery is turned on, there is a deflection in the galvanometer.
2) When the battery is turned off, there is also a deflection in a galvanometer but in an opposite direction from (1).
3) Later demonstration showed that a moving coil would also cause a deflection in the galvanometer.
Conclusion from Faraday’s experiment, the electromotive force (emf):
( )dt
dvoltV memf
Ψ−= Faraday’s Law
![Page 240: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/240.jpg)
Faraday’s Law
( ) ( )memf dtdvoltV Ψ−=
magnetic flux
Lenz’s Law
Knowing that:∫ •=Ψ SdBm
3 conditional phenomena may produce emf:
1) Time varying field - Static circuit (Transformer emf)
2) Static field – Moving circuit (Motional emf)
3) Time varying field – Moving circuit
(Transformer emf + Motional emf)
![Page 241: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/241.jpg)
Time Varying Field- Stationary Circuit
Transformer emf
I
2
1R
)(tB increases
B induced
)(tB
SddtBdVemf •−= ∫
Transformer emf
Vemf: Potential between point 1 and 2
(1)
![Page 242: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/242.jpg)
Transformer emf
From electric field: ∫ •=l
emf dlEV (2)
(1)=(2)
∫∫ •−=• SddtBdldE
l
Using Stokes Theorem for LHS:
( ) ∫∫ •−=•×∇ SddtBdSdE
s
dtBdE −=×∇ Maxwell equation for
time varying field
![Page 243: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/243.jpg)
Example 1
Given: A structure as followsz
i1(t)10Ω
10Ω
i2(t) 10 cm
10 cm
Obtain i2(t) if i1(t)=2.5cos (2π×104 t) A
5 cm
![Page 244: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/244.jpg)
Moving Circuit- Static Field Motional emf
Moving bar
U
B
Direction of current: Fleming’s Right Hand Rule
z
xSd
Magnetic force on charge Q moving at velocity of :
BdvJFd ×=
BdvUFd v ×=⇒ ρ
U
![Page 245: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/245.jpg)
Motional emf
BUdQFd ×=⇒
From ;EQF =
BUEdQ
Fdm ×==
Motional electric field intensity
( )∫ ∫ •×=•=l l
memf ldBUldEVHence:
Motional emf
Nonzero value only along the path in motion
![Page 246: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/246.jpg)
Example 2
The loop in example1 is now moving with velocity
as shown below.
( )s/myU 5=
z
I110Ω
10Ω
10 cmyo
10 cm
1
2
4
3
I2
U
Find I2 if I1=10 A
![Page 247: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/247.jpg)
Time Varying Field - Moving Circuit
Transformer emf + Motional emf
In the case of time varying field and moving circuit, the generated emf :
( ) ldBUSddtBdVemf •×+•−= ∫∫
![Page 248: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/248.jpg)
Example 3
A conducting bar moving on the rail is shown below. Find an induced voltage on the bar if a bar moving with a velocity of and
0
6 cm
x
y
Q
P
Bu
( )s/my20 ( ) 26104 m/mWbzytcosB −=
![Page 249: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/249.jpg)
Next Lecture
Please have a preliminary reading on the following topic:
1) Displacement Current
2) Maxwell’s Equations in Time Varying Field
3) Lossy Dielectrics
Reference: Hayt & Buck (page 313-321)
![Page 250: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/250.jpg)
Lecture #21
Topics to be covered:(i) Displacement Current
(ii) Maxwell’s Equations for Time Varying Field
(iii) Lossy Dielectrics
Reference: Hayt and Buck, page 313-321
![Page 251: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/251.jpg)
Objectives
1. To investigate the phenomena of displacement current due to time-varying electric field.
2. To investigate on the changes of Maxwell’s equation for time varying field (due to the concept of displacement current).
3. To learn about the concept of lossy dielectric and how it used to classify the material.
![Page 252: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/252.jpg)
Displacement Current
Recall: Capacitor in Chapter 5;
+ + + + + + + + + + + + + +
- - - - - - - - - - - - - - - - - -
Dielectric: How can the current go through the dielectric material (insulator) ??
The phenomena is to be discussed using the concept of displacement current
![Page 253: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/253.jpg)
Displacement Current
From continuity current equation:
vdtdJ ρ−=•∇
( )
( ) ( )DdtdH
dtdH v
•∇−=×∇•∇⇒
−=×∇•∇⇒ ρ
D is time varying field
The left handside is zero (by vector identity)
( ) ( ) ( )DdtdD
dtdH •∇−•∇=×∇•∇∴
( ) JdtDdH •∇+⎟⎟⎠
⎞⎜⎜⎝
⎛•∇=×∇•∇⇒
+ + + + + + + + + + + + + +
- - - - - - - - - - - - - - - -
![Page 254: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/254.jpg)
Displacement Current
dtDdJH +=×∇∴
Conduction current density
Displacement current density, :
Current flow in the dielectric material of the capacitor
dJ
(1)
(1) is also a Maxwell’s equation for time varying field.
+ + + + + + + + + + + + + +
- - - - - - - - - - - - - - - -
Ic
dJ
For a perfect dielectric:0=J
dJH =×∇∴
![Page 255: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/255.jpg)
Maxwell’s Equations
Time Varying FieldStatic Field
vD ρ=•∇ vD ρ=•∇
0=•∇ B 0=•∇ B
0=×∇ EdtBdE −=×∇
JH =×∇ dtDdJH +=×∇
![Page 256: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/256.jpg)
Example 1
A coaxial cable has a dielectric with an εr=4. The inner conductor has a radius of 1.0 mm and the inside radius of the outer conductor is 5.0 mm. Find the displacement current between the two conductors per meter length of the cable for an applied voltage, V = 100 cos (12π ×106t) V.
Hint: Use ⎟⎟⎠
⎞⎜⎜⎝
⎛=
a
b
rrln
LC πε2
Example 2Find the amplitude of the displacement current density:
(a) In the air near a car antenna where the field strength of an FM signal is:
(b) In an air space within a large power transformer where ( ) ( )m/Vzy.t.cosE 09221027768 8 −×=
( )( ) ( )m/Ayz.tcosH 66 102566137710 −×+=
![Page 257: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/257.jpg)
Example 3
Find the amplitude of the displacement current density in a metallic conductor at 60 Hz, if ε=εo, µ=µo, =5.8×107 S/m and ( ) ( )21117377 m/MAxz.tsinJ −=
Example 4
Consider the region defined by and .
If : Find;
(a)
(b)
(c)
(d) Numerical value of b
y,x 1<z
( ) 28105120 m/Aybxt.cosJ d µ−×=
E;D
H;B
dJ
![Page 258: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/258.jpg)
Example 5
Let the internal dimension of a coaxial capacitor be a =1.2cm, b=4cm and l=40 cm. The homogeneous material inside the capacitor has the parameters ε=10-11 F/m, µ=10-5 H/m and =10-5 S/m. If the electric field intensity is
Find:
(a) J
(b)The total conduction current through the capacitor
(c) The total displacement current through the capacitor.
(d)The quality factor of the capacitor.
( )m/Vrtcosr
E 56
1010=
![Page 259: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/259.jpg)
Lossy Dielectrics
Recall;dtDdJH +=×∇
For a perfect (lossless, non-conducting) dielectrics, 00 == σ;J
In reality, 0≠J Lossy dielectrics0≠σ;
(1)
Consider a lossy dielectric and from (1), it can be written:
DjJH ω+=×∇
( )E'jH
E'jEH
ωεσ
ωεσ
+=×∇⇒
+=×∇⇒(2)
Consider a lossless dielectric and from (1), it can be written:
EjH ωε=×∇ (1)
![Page 260: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/260.jpg)
Lossy Dielectrics
To investigate the relation of dielectric permittivity in lossless (ε) and lossy dielectric (ε’ ), we shall then equate (1) and (2):
'jj ωεσωε +=
⎟⎠⎞
⎜⎝⎛ −=⇒
−=⇒
+=⇒
'j'
j'
j'
ωεσεε
ωσεε
ωσεε
1
Loss tangent;
For a lossless dielectric, loss tangent = 0
⎟⎟⎠
⎞⎜⎜⎝
⎛
d
c
II
![Page 261: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/261.jpg)
Lossy Dielectric
For lossless dielectric in parallel plate capacitor:
For lossy dielectric in parallel plate capacitor:
+
--
+++++
--- -ve
cJtDJd ∂∂
→
Leakage current
R CcI dI
+
--
+++++
--- -ve
tDJd ∂∂
→ C dI
![Page 262: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/262.jpg)
Lossy Dielectrics
Loss tangent concept can be used to classify the material:
From, loss tangent = 'ωεσ
Good conductor
Bad conductor
Loss tangent high
Loss tangent small
For material with small conductivity, to be a good conductor, frequency used must be small to increase the loss tangent.
![Page 263: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/263.jpg)
Example
Consider a parallel plate capacitor having a plate area of 1.0 cm2 each and where the plates are separated by a distance of 1.0mm by a dielectric having the following properties at 1GHz.
εr’ =2 ; = 10-7 S/m
Find the equivalent circuit for this capacitor and calculate the conduction current, displacement current and the loss tangent if 1 V at 1 GHz is applied across the capacitor.
Hint: Use and dSC ε
=S
dRσ
=
![Page 264: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/264.jpg)
Next Lecture
Please have a preliminary reading on the following topic:
1) Propagation of Plane Waves in Free Space
Reference: Hayt & Buck (page 396-404)
![Page 265: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/265.jpg)
Lecture #22
Topics to be covered:
i) Wave Propagation in Free Space/ Lossless Dielectrics
Reference: Hayt and Buck, page 396-404
![Page 266: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/266.jpg)
Objectives
1. To use the Maxwell’s equations in time varying field in describing the wave propagation behaviour.
2. To study the wave propagation behaviour in free space and lossless dielectrics in terms of wave velocity, wavenumber (propagation constant) and relation between propagating electric field and magnetic field.
![Page 267: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/267.jpg)
Maxwell’s Equations
(Time Varying Field)
Wave Propagation in Free Space /Lossless Dielectrics
Wave Propagation in Lossy Dielectrics
Wave Propagation in Good Conductors
![Page 268: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/268.jpg)
Wave Propagation
CommTower
Portable devices
The propagating wave is a combination of time varying electrical field, and magnetic field, .
( )tE( )tH
y
Hy
But how to determine the both field in the propagating wave?
Consider the simplest wave propagation, i.e. plane wave
z
x Ex
Direction of z
![Page 269: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/269.jpg)
Maxwell’s Equations
Recall:
dtEdJH;
dtHdE
B;D
oo
v
εµ
ρ
+=×∇−=×∇
=•∇=•∇ 0
Wave propagating medium (free space and lossless dielectric) is assume to be sourceless ρv =0 ; J =0
Hence; the Maxwell’s equations become:
dtEdH;
dtHdE
B;D
oo εµ =×∇−=×∇
=•∇=•∇ 00
![Page 270: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/270.jpg)
Wave EquationConsider the plane wave propagation in the direction of z, and electric field is polarized along x xEE x=
From the diagram:
The magnitude of change only with respect to z coordinate.
Ez
xxEE x=
From Maxwell’s:
dtHdy
dzdE
Edzd
dyd
dxd
zyx
E ox
x
µ−===×∇
00
ydt
dH yoµ−=
E and are orthogonal
H
z
y yHH y=
(1)
![Page 271: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/271.jpg)
Wave Equation
Knowing that magnetic field is polarized along y direction
and the magnitude change only with respect to z (diagram)
yHH y=
From Maxwell’s:
xdt
dEdtEdx
dzdH
Hdzd
dyd
dxd
zyx
H xoo
y
y
εε ==−==×∇
00
H
(2)
From (1) and (2):
dtdH
dzdE y
ox µ−=
dtdE
dzdH x
oy ε−=
(3)
(4)
![Page 272: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/272.jpg)
Wave Equation (Electric Field)
To find relation between (3) and (4); two steps need to be worked out:(i) Differentiate (3) with respect to z
(ii) Differentiate (4) with respect to t
Hence:
⎟⎟⎠
⎞⎜⎜⎝
⎛−=
dzdH
dtd
dzEd y
ox µ2
2
2
2
dtEd
dtdH
dzd x
oy ε−=⎟⎟⎠
⎞⎜⎜⎝
⎛(5) (6)
Substituting (6) into (5):
2
2
2
2
dtEd
dzEd x
oox εµ= Wave equation for x-
polarised electric field, propagating along z direction.
2
2
2
2
dtEd
dzEd xx µε=
(Free space)
(Lossless dielectric)
![Page 273: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/273.jpg)
Wave Equation (Magnetic Field)
To find relation between (3) and (4); two steps need to be worked out:(i) Differentiate (3) with respect to t
(ii) Differentiate (4) with respect to z
Hence:
2
2
dtHd
dtdE
dzd y
ox µ=⎟⎠⎞
⎜⎝⎛
⎟⎠⎞
⎜⎝⎛−=
dzdE
dtd
dzHd x
oy ε2
2
(7) (8)
Substituting (7) into (8):
2
2
2
2
dtHd
dzHd y
ooy εµ=
Wave equation for y-polarised magnetic field, propagating along z direction.
2
2
2
2
dtHd
dzHd yy µε=
(Free space)
(Lossless dielectric)
![Page 274: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/274.jpg)
Wave EquationConsider again, the wave equation for x-polarised electric field in free space:
2
2
2
2
dtEd
dzEd x
oox εµ=
In phasor form:
xoox E
dzEd εµω 22
2
−= (9)
Alternatively, (9) can be written as:
xox Ek
dzEd 22
2
−=
ko : propagation/phase constant (rad/m) = cooωεµω =
ω = 2πf : Frequency in rad/s ; f is the wave frequency
( )s/mcoo
81031×==
εµ
Noted that:
(light velocity)
(10)
![Page 275: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/275.jpg)
Wave Equation
From (10):xo
x Ekdz
Ed 22
2
−=
Mathematically, solution for (10) will be:
( ) zjkx
zjkxx
oo eEeEzE +−−+ +=
z
x
( ) zjkxx
oeEzE −+=
( ) zjkxx
oeEzE +−=
(11)
In real form; (11) can be written as: (ignoring the complex quantity)
( ) ( ) ( )zktcosEzktcosEzE oxoxx ++−= −+ ωω (12)
![Page 276: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/276.jpg)
Wave Equation
Recall, from (1):
dtdH
dzdE y
ox µ−=
( ) ( ) ( )zHjeEjkeEjk yozjk
xozjk
xooo ωµ−=+− −−+
Using (11):
( ) zjkx
o
ozjkx
o
oy
oo eEkeEkzH −−+⎟⎟⎠
⎞⎜⎜⎝
⎛−⎟⎟
⎠
⎞⎜⎜⎝
⎛=
ωµωµ
( ) zjk
o
ox
zjk
o
oxy
oo eEeEzH ⎟⎟⎠
⎞⎜⎜⎝
⎛−⎟
⎟⎠
⎞⎜⎜⎝
⎛= −−+
µε
µε
( ) zjky
zjkyy
oo eHeHzH −−+ −= (13)
![Page 277: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/277.jpg)
(Wave Equation)
From (13); the following relation between E field and H field in wave propagating in free space can be deduced:
Ω==−= −
−
+
+
377o
o
y
x
y
x
HE
HE
εµ (14)
(14) is called intrinsic impedance of free space.
In lossless dielectric:
εµ
=−= −
−
+
+
y
x
y
x
HE
HE (15)
(15) is called intrinsic impedance of dielectric.
![Page 278: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/278.jpg)
Example
An E field in free space is given as:
( ) mVzytE /ˆ10cos800 8 β−=
Find:
a) β
b) λ
c) H at P (0.1,1.5,0.4) at t=8ns
![Page 279: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/279.jpg)
Example
In a certain lossless dielectric, µ=µo; ε=3.4εo and electric field is presented by:
( ) mVxztE /ˆ103sin10 8 βπ −×=
( )( )( )( )( )( )( ) λ
η
β
g
Hfe
Ud
cfbEa
y
x
+
+
![Page 280: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/280.jpg)
Next Lecture
Please have a preliminary reading on the following topic:
1) Propagation of Plane Waves in Lossy Dielectrics
Reference: Hayt & Buck (page 404-416)
![Page 281: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/281.jpg)
Lecture #23
Topics to be covered:
(i) Wave Propagation in Lossy Dielectrics
(ii)Wave Power – Poynting Vector
Reference: Hayt & Buck (page 404-416)
![Page 282: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/282.jpg)
1. To study the wave propagation behaviour in lossydielectrics in terms of intrinsic impedance, wave velocity, wavenumber (propagation constant) and relation between propagating electric field and magnetic field.
2. To calculate the wave power by utilizing the PoyntingTheorem
Objectives
![Page 283: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/283.jpg)
Recall: Lossy Dielectrics
The concept has been discussed in the topic of displacement current.
The lossy dielectric permittivity is complex
( )m/Fj'j' or ωσεε
ωσεε −=−= (1)
Where;
ωσε ' = dielectric permittivity
= dielectric conductivity
= frequency in rad/s
![Page 284: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/284.jpg)
Plane Wave in Lossy DielectricsRecall: For wave propagation in lossless dielectric;
Propagation constant,
µεω=k (rad/m) (2)
However, in lossy dielectric;
ε complex
∴ k complex
Thus, from (2):
⎟⎠⎞
⎜⎝⎛ −=
ωσεµω jk '
'1'
ωεσµεω jk −= (3)
![Page 285: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/285.jpg)
Plane Wave in Lossy Dielectrics
Let:βα jjk +=
( )22 βα jk +=−⇒
( ) αββα 2222 jk −−−=⇒ (4)
From (3):ωµσµεω jk −= '22 (5)
From (4) and (5):
( ) '222 µεωβα −=− (real)
ωµσαβ =2 (imag)
(6)
(7)
![Page 286: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/286.jpg)
Plane Wave in Lossy Dielectrics
(6) and (7) are used to determine the and β:
)8( / 1-'
12
'22
2
mNp⎥⎥⎦
⎤
⎢⎢⎣
⎡+=
εωσµεωα
)9( /1'
12
'22
2
mrad⎥⎥⎦
⎤
⎢⎢⎣
⎡++=
εωσµεωβ
Please prove (8) and (9) on your own !!!
is an attenuation constant: A measure of wave attenuation while travelling in a medium.
β is a phase constant. A measure of phase change while travelling in a medium.
![Page 287: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/287.jpg)
Recall: From the Lecture #22; the wave propagation equation can be written as:
Plane Wave in Lossy Dielectrics
( ) zjkx
zjkxx
oo eEeEzE +−−+ +=
Where ko is a wave propagation constant in free space.
In lossy dielectrics, replace jko with . (10) becomes: βα j+
(10)
( ) ( ) ( )zjx
zjxx eEeEzE βαβα ++−+−+ +=
Consider a wave propagation in +z direction:
( ) zjzxx eeEzE βα −−+=
(11)
(12)
In real form:( ) ( )ztcoseEzE z
xx βωα −= −+ (13)
![Page 288: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/288.jpg)
Plane Wave in Lossy Dielectrics
From (13); wave will be attenuated by e-z when propagate in the lossy dielectrics.
( ) ( )ztcoseEzE zxx βωα −= −+
( ) ( )zktcosEzE oxx −= + ω ( ) ( )kztcosEzE xx −= + ω(free space) (lossless dielectrics)
(lossy dielectrics)
z
x
z
x
e-z
![Page 289: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/289.jpg)
Plane Wave in Lossy Dielectrics
In lossless dielectric; the intrinsic impedance:
εµη = (Ω)
In lossy dielectric; the intrinsic impedance:
ηθη ηθη
ωεσεµ
ωεσε
µη jejj
=∠=⎟⎠⎞
⎜⎝⎛ −
=⎟⎠⎞
⎜⎝⎛ −
=
'1
'
'1'
(Ω)
Where:
412
1/
'
'/
⎥⎥⎦
⎤
⎢⎢⎣
⎡⎟⎠⎞
⎜⎝⎛+
=
ωεσ
εµη
'tan
ωεσθη =2
![Page 290: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/290.jpg)
From:
ηθη
η
∠=⇒
=
++
+
+
xy
y
x
EH
HE
Plane Wave in Lossy Dielectrics
Thus, consider only the +z propagation of the magnetic field wave:
( ) ( )ηα θβω
η−−= −
+
zteEzH zxy cos
ηθη
η
∠−=⇒
−=
−−
−
−
xy
y
x
EH
HE
Ex
Hy
x
z
y
![Page 291: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/291.jpg)
Plane Wave in Lossy Dielectrics
Previously, in lossless dielectric; the wave velocity:
kων = (m/s)
In lossy dielectric; the wave velocity:
βων = (m/s)
In conclusion: for wave propagation in lossy dielectrics, two important observations can be made:
(i) Both electric and magnetic field waves will be attenuated by e-z
(ii) E leading H by θη
![Page 292: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/292.jpg)
Example
A lossy dielectric has an intrinsic impedance of at the particular frequency. If at that particular frequency a plane wave that propagate in a medium has a magnetic field given by :
Ωo30∠200
./ˆ)x/2-cos(10 - mAyteH x ωα=
Find and .E α
![Page 293: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/293.jpg)
Wave Power Calculation
From previous lecture, the plane wave and plane wave were found to be perpendicular to each other.
E H
Hence the wave power:
HEP ×= (W/m2) (14)
Equation (14) can also provide the wave propagation direction.
Equation (14) Poynting vector
(i) For lossless dielectrics:
( )
( ) ( )ykztEykztHH
xkztEE
xy
x
ˆcosˆcos
ˆcos
−=−=
−=+
+
+
ωη
ω
ω
![Page 294: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/294.jpg)
Wave Power Calculation
From (14); The wave power:
( ) ( ) 222
/ˆcos mWzkztEP x −=+
ωη
To find the time average power density:
( ) ( )
( )η
ωη
2
cos1
1
2
2
0
20
+
+
=⇒
−=⇒
=
∫
∫
xavg
Tx
avg
T
avg
EP
dtkztET
P
dtPT
P
(15)
![Page 295: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/295.jpg)
Wave Power Calculation
(ii) For lossy dielectrics:
( )
( ) ( )yzteEyztHH
xzteEE
zxy
zx
ˆcosˆcos
ˆcos
ηα
η
α
θβωη
θβω
βω
−−=−−=
−=
−+
+
−+
( ) ( ) ( ) zztzteEP zx ˆcoscos22
ηα θβωβω
η−−−= −
+
( ) ( ) ( )η
α
θη
ωη
cos2
cos1
1
222
0
20
zx
Tx
avg
T
avg
eEdtkztET
P
dtPT
P
−++
=−=⇒
=
∫
∫
The time average power density:
(16)
![Page 296: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/296.jpg)
Example
At frequencies of 1, 100 and 3000 MHz, the dielectric constant of ice made from pure water has values of 4.15, 3.45 and 3.20 respectively, while the loss tangent is 0.12, 0.035 and 0.0009, also respectively. If a uniform plane wave with an amplitude of 100 V/m at z=0 is propagating through such ice, find the time average power density at z=0 and z=10 m for each frequency.
![Page 297: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/297.jpg)
Next Lecture
Please have a preliminary reading on the following topic:
1) Propagation of Plane Waves in Good Conductors
Reference: Hayt & Buck (page 416-423)
![Page 298: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/298.jpg)
Lecture #24
Topics to be covered:
(i) Wave Propagation in Good Conductors
Reference: Hayt & Buck (page 416-423)
![Page 299: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/299.jpg)
1. To study the wave propagation behaviour in good conductors in terms of intrinsic impedance, wave velocity, wavenumber (propagation constant) and relation between propagating electric field and magnetic field.
Objective
![Page 300: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/300.jpg)
Propagation of Plane Wave in Good Conductors
Recall: From our discussion in lossy dielectrics;
Good conductors: 1>>'ωε
σ
Hence: the wave properties previously obtained for lossydielectrics can be used in describing wave propagation in good conductors.
The attenuation constant and phase constant can be written as:
( )2 1-12 22
2
m/Np'
'
⎥⎥⎦
⎤
⎢⎢⎣
⎡+=
εωσµεωα
( )3 112 22
2
m/rad'
'
⎥⎥⎦
⎤
⎢⎢⎣
⎡++=
εωσµεωβ
(1)
![Page 301: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/301.jpg)
Propagation of Plane Wave in Good Conductors
To determine any changes to wave properties in conductor: (1) is applied into (2) and (3):
( )42
m/Npf µσπωµσα ==
( )52
m/radfµσπωµσβ ==
Also; for intrinsic impedance:
⎟⎠⎞
⎜⎝⎛ −
=⎟⎠⎞
⎜⎝⎛ −
=
'j
'
'j'
ωεσεµ
ωεσε
µη11
(6)
![Page 302: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/302.jpg)
Propagation of Plane Wave in Good Conductors
It can be shown that for good conductors, (6) can be altered to be:
o45∠=σωµη (7)
From (7), it can be deduced that the electric field wave will lead the magnetic field wave by 45o.
( ) ( )zftcoseEzE zfxx µσπωµσπ −= −+
( ) ( )ozfyy zftcoseEzH 45−−= −+ µσπωµσπ
(8)
(9)
![Page 303: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/303.jpg)
Propagation of Plane Wave in Good Conductors
An important concept, related to the wave propagation in good conductors is skin depth.
( ) ( )zftcoseEzE zfxx µσπωµσπ −= −+
Considering the electric field wave as in (8):
z
Consider the wave magnitude:
At z=0, the magnitude is Ex+
At , the magnitude is µσπf
z 1= ++
xx E.@Ee
36801
µσπfz 1=0=z
δ
+xE+xE.3680
![Page 304: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/304.jpg)
Skin depth @ Depth of penetration:
µσπβαδ
f111
===
The distance is denoted by and is called skin depth
Propagation distance (in conducting medium) that reduce the amplitude of propagating wave to e-1 or 37% of its initial value.
![Page 305: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/305.jpg)
ExampleFind the phase and amplitude of the E field at a depth of 0.1 mm into a copper sheet relative to that entering the surface for a 1 GHz wave directed normal to the sheet.
Given: σcopper=5.8x107 ; εr=1; µr=1
ExampleCalculate the skin depth of copper at 60 Hz and at 6 GHz
Given: σcopper=5.8x107 ; εr=1; µr=1
![Page 306: electromagnetic field theory fke Skee 2523 sscfsem5 lect 01-24](https://reader033.vdocuments.net/reader033/viewer/2022061307/589b41c71a28ab22038b70b7/html5/thumbnails/306.jpg)
THANK YOU