iaar_team 23+24

10
Instant Aarhus IAA ... Daniel Birch Ayaka Kawada Mads Vinding Johnsen Andreas Obel Bjørn-Præst Henrik Nykjær Signe Hemmingsen Julie Bertelsen Kristian Skjoldborg Anne Bea Høgh Marie Frida Nonboe Katrine Kretzchmar Klara Lyshøj Julie Rosvall Mathilde Helbo Katrina À Bakkanum Rebecca Stræde ...

Upload: iaar

Post on 07-Mar-2016

219 views

Category:

Documents


3 download

DESCRIPTION

 

TRANSCRIPT

Page 1: iAAR_team 23+24

Instant Aarhus IAA

...

Daniel BirchAyaka KawadaMads Vinding JohnsenAndreas Obel Bjørn-PræstHenrik Nykjær Signe HemmingsenJulie BertelsenKristian Skjoldborg

Anne Bea HøghMarie Frida NonboeKatrine KretzchmarKlara LyshøjJulie RosvallMathilde HelboKatrina À BakkanumRebecca Stræde...

Page 2: iAAR_team 23+24

INSTANTAARHUS (iAAR), Mols, Fuglsø, Septem-ber 2013.

INSTANTAARHUS is inspired by a former project called INSTANTIBIZA from 1971 created by José Miguel de Prada Poole. IAAR is build up by a dome, three main streets and twelve neighborhoods. The dome is positioned in the center of the city and the three main streets stretch out from the dome where the neighborhoods are at-tached.

Our groups (number 23 and 24) were given neigh-borhood number 3 which is located next to the main entrance on one of the main streets. The task was to build an inflateable structure out of transparent plas-tic and end up with an entire city.We were given 160 square meters of plastic, tape and a lot of staples.Before the workshop the 3rd year students had a pre-workshop where they explored the possibilities of the material.

Page 3: iAAR_team 23+24
Page 4: iAAR_team 23+24

Located in the center of our structure is a column created out of strings. Instead of using the column to take the pressure of the construction as in conventionel struc-turel systems, we used the column to take the tension. The strings are fixed in differ-ent sized circles in the top and bottom of the construction. Furthermore the fix points are twisted 90 degrees which make the col-umn seem more solid.Columns are a static element which is de-signed to take pressure. This persepctive will change when constructing an inflatable structure due to the construction made of air and all forces will be represented as ten-sion when expanding. Because of this we have been making a column which holds the structure together and gives it shape instead of bearing the construction.

Page 5: iAAR_team 23+24
Page 6: iAAR_team 23+24

There have been created five smaller spac-es around the center of the construction. These are positioned towards the column in the middle and stage this as the center of the structure. It is possible to stay in each of the five nich-es. Between the niches there is no direct visual contact but you can still obtain a feel-ing of being in the same space because of the transparency of the material - contact visually and sonically.

Instant Aarhus City

Page 7: iAAR_team 23+24
Page 8: iAAR_team 23+24

Projection drawing

Page 9: iAAR_team 23+24

Inflating Collum

Page 10: iAAR_team 23+24