ifsf-lon® from proprietary protocol...
TRANSCRIPT
The I-PROP converter has been designed as the universal hardware making possible the conversion from proprietary interfaces of the site equipment devices to the interface standard IFSF/LON®. The converter is equipped with two asynchronous communication lines on the proprietary interface side. The modular design of the proprietary side enables the alternative physical lines (Current Loops, RS232, RS422, RS485 etc.). The I-PROP plastic case enables easy mounting on standard DIN rail. The converter is ready for the installing directly into the dispenser head. The I-PROP requires external stabilised power supply.
“Multi I-PROPs” are available for some dispensers. Multi I-PROP contains several I-PROPs installed into the PC case with the power supply. Upgrade of the petrol station with the Multi I-PROP requires only reconnection of the proprietary communication lines from the old site controller to the Multi I-PROP and its connection with the IFSF POS.
I-PROPIFSF-LON® from Proprietary Protocol Converter
fuel sites
Features:• simplesetup
andinstallation• supportsIFSFdispenserapplication
V2.00(passedIFSFcertificationprocess)
• variouscalculatorphysicallineinterfaces• supportsmulti-gradeandsingleproduct
dispensers• low-costsolutionforupgradinglegacy
dispenserstoIFSF• wideoperatingtemperaturerange• diagnosticLEDsanddiagnosticinterface
Supported protocols:• ATCL(Autotank)• ChristianRowsing• DART(DresserWayne,
Petrolmeccanica)• EASYCALL(Adast)• ER3/4(Mannesmann-Kienzle,
Salzkoten,Scheidt-Bachmann)• EPS(EPS3,EPS5,EPS6)
(Tokheim)• UDC(Tokheim)• TatsunoMetax(Tatsuno)• ZSR(Schlumberger)
dispenserPRICE PER LQUANTITYTOTAL
iFSF posI-PROP
dispenser protocol
dispensingSIDE A
dispensingSIDE B
IFSF line
(FTT-10)
TYPICAL I-PROP INSTALLATION
Beta Control s.r.o.Černého 58/60, 635 00 Brno-Bystrc, Czech Republictel.: +420 546 223 491 fax: +420 546 223 470e-mail: [email protected]
For further details, please visit our website www.betacontrol.cz
fuel sites
Technical data:• powersupply5VDC/200mA(12VDCto24VDCoptional)• operatingtemperature-40°Cto+80°C• dimensions90x58x160mm• IFSFcommunicationlineFTT-10(FreeTopologyTwistedPair)• diagnosticLEDs(operating,IFSFcommunication,proprietarycommunication)
Ordering codes:
I-PROP Description 12-24V*
PKONVEPS-IFSF/001 ProtocolconverterEPS3/EPS5/EPS6-IFSF. -
PKONVEC-IFSF ProtocolconverterEASYCALL-IFSF. x
PKONVWD-IFSF ProtocolconverterDART-IFSF. x
PKONVTATSUNO-IFSF ProtocolconverterMetaxTatsuno-IFSF. x
PKONVATCL-IFSF ProtocolconverterATCL-IFSF. -
PKONVUDC-IFSF ProtocolconverterUDC-IFSF. x
PKONVSCH-IFSF ProtocolconverterZSR-IFSF. -
PKONVK-IFSF ProtocolconverterER3/ER4-IFSF. -
PKONVCR-IFSF ProtocolconverterChristianRowsing-IFSF. -
PKONVSB-IFSF ProtocolconverterER3/ER4–IFSF.Note:OnlyfortheScheidt-BachmannT10dispensers.
-
PKONVEPS-IFSF/001/CSx MultiprotocolconverterEPS3/EPS5/EPS6–IFSF.x–numberoftheinstalledI-PROPs.
-
PKONVCR-IFSF/CSx MultiprotocolconverterChristianRowsing–IFSF.x–numberoftheinstalledI-PROPs.
-
PKONVTATSUNO-IFSF/CSx MultiprotocolconverterMetaxTatsuno–IFSF.x–numberoftheinstalledI-PROPs.
-
PKONV-PWR-01 Internalsupplymoduleforthepowerinput12VDCto24VDC.
-
Beta Control s.r.o.Černého 58/60, 635 00 Brno-Bystrc, Czech Republictel.: +420 546 223 491 fax: +420 546 223 470e-mail: [email protected]
For further details, please visit our website www.betacontrol.cz