kerr pulp canal sealer ewt for lubrication 1. double check for dryness to working length with...
TRANSCRIPT
KerrKerr Pulp Canal Sealer EWT Pulp Canal Sealer EWTfor Lubricationfor Lubrication
1. Double check for dryness to working length with sterile absorbent point.
2. Place to terminus with absorbent point.
3. Remove with absorbent point(s) until slightly “splotchy” (Splotchy Paper Point Test).
4. Now ready to inject pre-warmedpre-warmed GPGP.
Tips on Use:
Use onlyonly larger 20 gauge needles20 gauge needles
201
Set at highest temp highest temp settingsetting Use SchwedSchwed regular flowregular flow Gutta Percha
Tips for packing GP:
Preset plugger so no bindingno binding
Use #9 Schilder#9 Schilder plugger, or
Blue Dovgan #60 NiTiDovgan #60 NiTi
5 second5 second “push”
Don’t “bounce” off GP
Keep wad of GPwad of GP ahead
Make sure plugger cleanplugger clean
Use enough pressureenough pressure!