level 5 keyless entry
TRANSCRIPT
8/4/2019 Level 5 Keyless Entry
http://slidepdf.com/reader/full/level-5-keyless-entry 1/2
KEYLESS ENTRY
L E V E L 5 T O T A L A S S E T M A N A G E M E N T
G E N E R A T I O N T W O
FLEXIBILITY • Portable system rechargeable 6V DC.• Signals operator when recharge is needed.• Reads employee badges or cards.• Key can be used to override the system.• Electronic master key available.• Keyless Entry can be retrotted or installed in any KRL/
KRS Series roll cabs and workstations.
Three scanning modules are available: Magnetic strip, Proximity card (H,I.D ormat), and Bar
code – providing you with fexibility and total access control. You decide which employees
have access and which employees don’t. With Snap-on keyless entry you know, at a glance,
the who, what, where and when.
Improved Design includes:
• Data port
• 6v 1500mA power port
• Low battery light
• Unlocked drawer warning light
• 1 million cycle heavy-dutystainless steel multi-function button
• Card reader proximity version shown
TRACEABILITY & ACCOUNTABILITY• Box entry by user is recorded and backed up.• Report is easily generated and exported, listing users, times
and dates of entry.
• System interfaces with Level 5 asset management software.
SECURITY • Reads individually encoded badges or cards
for access control.
• Only authorized employees can unlock the tool box.• Re-locks at the push of a button.• Flashing red LED when unlocked.• Advance programmable alarm system is included.• Programmable locking/unlocking with “Lockview.”• New Drawer Control allows only one drawer per bank to be
opened at a time.
8/4/2019 Level 5 Keyless Entry
http://slidepdf.com/reader/full/level-5-keyless-entry 2/2
Snap-on, There is a Difference, and Level 5 Tool Control System are trademarks of Snap-on Incorporated.© 2008, Snap-on Incorporated. All Rights Reserved.Lockview is a registered trademark of Soaring Software Solutions, Inc.
Snap-on Industrial, 2801 80th Street, Kenosha WI 53143
SS2729A 7/2008 5M Printed in USA
L E V E L 5 T O T A L A S S E T M A N A G E M E N T
www.snapon.com/ indust r ia luk
EASY TO ORDER
Step One: Order your storage units by color choice from
the following selection. Note: Does not include access panel.
Step Two: Order the appropriate card reader access panel
from one of the following:
1. Magnetic Strip Card Module – KREMSG2
2. Proximity Card Reader Module - H.I.D. Format– KREPCPG2
3. Bar Code Reader Module – KREBCCG2
Step Three: Order the Lockview Software.
Lockview Software with USB Dongle – KRELVS
Note: Order one per administer computer not one
per box, Version 3.1 required for Gen II
KRE722BPBO
KRE1022BPBO
KRE7022BPBO
KRE7023BPBO
KRE756CPBO
KRE1023BPBO
KRE1032PBO
KRE1056CPBO
KRE722BPCM
KRE1022BPCM
KRE7022BPCM
KRE7023BPCM
KRE756CPCM
KRE1023BPCM
KRE1032PCM
KRE1056CPCM
KRE722BPC
KRE1022BPC
KRE7022BPC
KRE7023BPC
KRE756CPC
KRE1023BPC
KRE1032PC
KRE1056CPC
KRE722BPES
KRE1022BPES
KRE7022BPES
KRE7023BPES
KRE756CPES
KRE1023BPES
KRE1032PES
KRE1056CPES
KRE722BPKS
KRE1022BPKS
KRE7022BPKS
KRE7023BPKS
KRE756CPKS
KRE1023BPKS
KRE1032PKS
KRE1056CPKS
n Red n Blue n Black n Yellow n Arctic Silver
contac t Snap-on Indust r ia
phone +44 (0)1536 413 9 0
emai l Lev el5@sna pon .co
• Retrot kits:
Complete Bar Code Kit – KREBKIT Complete Mag Strip Kit – KRESKIT
Complete Proximity Kit – KREPKIT
For 220 volt add sufx 220V
• Service parts: Gen I Mag Stripe – KREMS
Prox. Card – KREPCP
Bar Code – KREBCC
Wiring Harness – KREWH
• Only one Lockview Softwarepackage required per administrator
or department.
• Other KRE colors are available by special order.
Allow 6 to 8 weeks for delivery.
• Slave units (max. of 6 per controller)allow the addition of side cabinets and top boxes.
• KRS Stationary Storage units can be retrottedwith keyless entry either in the eld or at thekitting center.
• Drawer Control feature is standard on aboveKRE models.
• Accessories:
Slave Unit – KRESU Y Adaptor Power Cord – KREYPC
Allows power supply to be plugged
into back of unit.
Replacement Charger – KARP2
230V Power Supply – KRE230PS
Replacement Batteries – KARP3
12 Volt Adaptor – KRE12VT
Gen II Wiring Harness – KREWSG2