4.0

Welcome RC-Spreadsheets:v4 Menu.xls version 4.0

to for concrete design to Eurocode 2 and BS 8110Limitations & Assumptions

Instructions for Use

System requirements

'file:///tt/file_convert/55cf9c00550346d033a83239/documUserGuid\Userguid.pdf

DisclaimerBasic Instructions

Blue underlined cells 0.00 are for data entry.Red highlighed cells 0.00 or 0.00 indicate entry errors.

Licence conditions This version is for UK use only.

NextClick a sheet tab below to begin.

© 2002 - 2010 The Concrete Centre

Spreadsheets can be a very powerful tool. Their use is becoming increasingly common in the preparation of design calculations. They can save time, money and effort. They provide the facility to optimise designs and they can help instill experience. However, these benefits have to be weighed against the risks associated with any endeavour. These risks must be recognised and managed. In other words appropriate levels of supervision and checking, including self-checking, must, as always, be exercised when using these spreadsheets.

Many local instructions are contained within individual

workbooks.Users are directed to the recommendations of the Standing Committee on Structural Safety (SCOSS) regarding the increasingly widespread availability of computer programs and circumstances in which their misuse could lead to unsafe structures.

Guidance on the use of each of the spreadsheets is given in the

accompanying User Guide.This spreadsheet should be used in compliance with the accompanying publication 'User Guide RC Spreadsheets: v4' available from The Concrete Centre www.concretecentre.com/rcdesign Tel +44 (0)1276 606800

An electronic version of the User Guide can be found on

your drive at:Min 128MB of RAM & 450MB processor, with Windows 2000 or later and Excel 2000 or later. For optimum display, please view at 1024 x 768 resolution and min 16 bit colour.

All advice or information from the British Cement Association (BCA) and/or The Concrete Centre (TCC) is intended for those who will evaluate the significance and limitations of its contents and take responsibility for its use and application. No liability (including that for negligence) for any loss resulting from such advice or information is accepted by the BCA, TCC or their subcontractors, suppliers or advisors. Users should note that all TCC software and publications are subject to revision from time to time and should therefore ensure that they are in possession of the latest version.

Do not paste or drag data (destroys conditional cell formatting).

Do not open an individual spreadsheet in more than one window (this may disable pulldowns).

The RC Spreadsheets are shareware. However, they may not be used for commercial purposes until the user has registered for a licence with the program provider - The Concrete Centre. Licences (and copies of the spreadsheets) may be purchased from The Concrete Bookshop (see above) or via The Concrete Centre website. For further and latest information, updates, FAQs, trial versions, latest news and other information on the RC-Spreadsheet suite please see:-

Macros All workbooks contain macros for printing, navigation, iteration etc. Please ensure that Macros are enabled in your Excel configuration.

www.concretecentre.com/rcdesign

BS 8110 SpreadsheetsElements Walls

Element Design Basement Wall

Bending and Axial Load Retaining Wall

Punching Shear

Spreadsheets for RC Design Crack Widths Stairs

to BS 8110 Analysis Stair Flight & Landing - Single

Version 4 Subframe Analysis Stairs & Landings - Multiple

Slabs Foundations

One-way Solid Slabs (A & D) Foundation Pads

Ribbed Slabs (A & D) Pilecap Design

Flat Slabs (A & D)

Tabular Versions

Beams One-way Solid Slabs (Tables)

Continuous Beams (A & D) Ribbed Slabs (Tables)

Post-tensioned Analysis & Design Flat Slabs (Tables)

CLICK a BUTTON Wide Beams (A & D) Two-way Slabs (Tables)

Continuous Beams (Tables)

Columns

Column Load Take-down

Rectangular Column Charting Rigorous One-way Slabs

Column Design Rigorous Ribbed Slabs

© 2002 - 2010 The Concrete Centre Circular Column Charting Rigorous Continuous Beams

Rigorous Versions (calculated deflections)

Eurocode 2 SpreadsheetsElements Walls

TCC11 Element Design TCC61 To come

TCC12 Bending and Axial Load TCC62 Retaining Wall

Slab Punching Core wall design

TCC14 Crack Widths

TCC15 Resistance of Retaining Members Stairs

Analysis Stair Flight & Landing - Single

TCC21 Subframe Analysis TCC72 To come

FE Assistant Foundations

Spreadsheets for RC Design Slabs Foundation Pads

to Eurocode 2 TCC31 One-way Solid Slabs (A & D) Pilecap Design

Ribbed Slabs (A & D)

TCC33 Tabular Versions

TCC91 To come

Version 4 Beams TCC92 To come

TCC41 Continuous Beams (A & D) TCC93 To come

CLICK a BUTTON TCC42 Post tensioned analysis & design TCC94 Two-way Slabs (Tables)

Wide Beams (A & D) TCC95 To come

Columns

TCC51 Column Load Take-down Design

TCC52 Rectangular Column Charting TCC31R Rigorous One-way Slabs

TCC53 Rectangular Column Design TCC32R To come

© 2002 - 2010 The Concrete Centre TCC54 Circular Column Design Rigorous Continuous Beams

Column Shortening 12/24 storeys

Flat Slabs (A & D) Single bay

Flat Slabs Whole floor

Rigorous Versions (calculated deflections)

TCC55

TCC33

TCC31

TCC13

TCC11

TCC12

TCC14

TCC21

TCC41

TCC31RTCC52

TCC53

TCC41R

TCC81

TCC82

TCC32

TCC43

TCC51

TCC54

TCC33X

TCC71

TCC42 TCC94

55X

TCC62

TCC22

TCC63

TCC15

document.xls Versions 04/17/2023

BS 8110 EC2 (EN1992-1)Spreadsheet NoVERSION currently on your disk Spreadsheet NoVERSION currently on your disk

RCC11 4.0 TCC11 4.1

RCC12 4.0 TCC12 4.1

RCC13 4.2 TCC13 4.0

RCC14 4.0 TCC14 4.1

TCC15 4.0RCC21 4.0 TCC21 4.0

TCC22 4.1RCC31 4.0 TCC31 4.0

RCC31R 4.0 TCC31R 4.0RCC32 4.0 TCC32 4.0

RCC32R 4.0 TCC32RRCC33 4.1 TCC33 4.2

TCC33X 4.1RCC41 4.0 TCC41 4.0

RCC41R 4.0 TCC41R 4.0RCC42 4.0 TCC42 4.0RCC43 4.0 TCC43 4.0

RCC51 4.0 TCC51 4.0

RCC52 4.0 TCC52 4.0

RCC53 4.0 TCC53 4.1

RCC54 4.0 TCC54 4.1

TCC55 4.0

TCC55X 4.0

RCC61 4.0 TCC61

RCC62 4.0 TCC62 4.0

TCC63 4.0

RCC71 4.0 TCC71 4.0

RCC72 4.0 TCC72

RCC81 4.1 TCC81 4.1

RCC82 4.0 TCC82 4.0

RCC91 4.0 TCC91

RCC92 4.0 TCC92

RCC93 4.1 TCC93

RCC94 4.0Menu.xls version 4.0

TCC94 4.0

RCC95 4.0 TCC95

Version Management

When spreadsheet links are updated, this page retrieves the version numbers of the

spreadsheets stored on your disk and lists them in columns

D and H.

Please check these against the latest available versions

at

http://www.concretecentre.com/rcspreadsheets

Disclaimer

Status of spreadsheet

V4 release

Date Version27-Aug-10 Menu v4.023-Nov-08 Menu v3.816-May-08 Menu v3.72-Apr-08 Menu v3.65-Nov-07 Menu v3.5

28-Sep-06 Menu v3.4

13-Jul-06 Menu v3.3

28-Jun-06 Menu v3.2

10-May-06 Menu v3.0

27-Jul-05 Menu v2.6a18-Jun-05 Menu v2.5

23-Jan-03 Menu v1.0

All advice or information from MPA-The Concrete Centre is intended for those who will evaluate the significance and limitations of its contents and take responsibility for its use and application. No liability (including that for negligence) for any loss resulting from such advice or information is accepted by MPA-The Concrete Centre or its subcontractors, suppliers or advisors. Users should note that all MPA-The Concrete Centre software and publications are subject to revision from time to time and they should therefore ensure that they are in possession of the latest version.

This spreadsheet should be used in compliance with the accompanying publication 'User Guide RC Spreadsheets: v4' available from The Concrete Centre www.concretecentre.com/rcdesign Tel +44 (0)1276 606800

Revision history Menu.xls

ActionTCC63 added. Re-badged as TCC/Mineral Products Association. 497

TCC22 added. Updating notes added. 594TCC62 added. 594

Minor amendments 593TCC55X and TCC94 spreadsheets added. 593

Dates corrected. Logos moved. 589

v3 release. Notes! added. 590

User Guide and registration details amended 590

General update 556

Posted to Concretecentre.com and for CD ROM 539Posted to Concretecentre.com 512

First issue

All advice or information from MPA-The Concrete Centre is intended for those who will evaluate the significance and limitations of its contents and take responsibility for its use and application. No liability (including that for negligence) for any loss resulting from such advice or information is accepted by MPA-The Concrete Centre or its subcontractors, suppliers or advisors. Users should note that all MPA-The Concrete Centre software and publications are subject to revision from time to time and they should therefore ensure that they are in possession of the latest version.

This spreadsheet should be used in compliance with the accompanying publication 'User Guide RC Spreadsheets: v4' available from The Concrete Centre www.concretecentre.com/rcdesign Tel +44 (0)1276 606800

This spreadsheet is shareware but may not be used for commercial purposes until the user has registered with The Concrete Centre using the licence validation form available on The Concrete

Centre website www.concretecentre.com/rcdesign

Size (kB)