networking seminar

YOU’RE ALL YOU’RE ALL

HIGHLY WELCOMEDHIGHLY WELCOMED

THANK YOU FOR THANK YOU FOR COMING AGAINCOMING AGAIN

INTO HIS HANDS WE INTO HIS HANDS WE COMMIT THIS TRAINING. COMMIT THIS TRAINING.

LET US PRAYLET US PRAY

DEPARTMENTAL RECOGNITIONDEPARTMENTAL RECOGNITION

CISCO CERTIFIED NETWORK ASSOCIATE (CCNA)

EEE

MCSIPHIMT

OTHERS

PREREQUISITE TO PREREQUISITE TO BECOMING A CISCO BECOMING A CISCO

CERTIFIED NETWORK CERTIFIED NETWORK ASSOCIATE (CCNA)…ASSOCIATE (CCNA)…

BASIC COMPUTER BASIC COMPUTER KNOWLEDGEKNOWLEDGE

(COMPUTER APPRECIATION(COMPUTER APPRECIATION))


GET RID OF IT…GET RID OF IT…

THE FUTO MIND SETTHE FUTO MIND SET


JUST A FLASH BACK JUST A FLASH BACK FOR FOR

PERFECTIONPERFECTION


NETWORKING APPRECIATIONNETWORKING APPRECIATION


WHAT IS NETWORKING?WHAT IS NETWORKING?

NETWORKING DEVICESNETWORKING DEVICES

NETWORK COMPONENTSNETWORK COMPONENTS MINIMUM OF TWO COMPUTERSMINIMUM OF TWO COMPUTERS

AN ACTIVE NIC (NETWORK INTERFACE AN ACTIVE NIC (NETWORK INTERFACE CARD) ON ALL COMPUTERSCARD) ON ALL COMPUTERS

A CONNECTION MEDIUM (WIRED OR A CONNECTION MEDIUM (WIRED OR WIRELESS)WIRELESS)

A NETWORK OPERATING SYSTEM (OS) A NETWORK OPERATING SYSTEM (OS) SOFTWARESOFTWARE


BENEFITS OF NETWORKINGBENEFITS OF NETWORKING

DATA SHARINGDATA SHARING

RESOURCE SHARINGRESOURCE SHARING


TYPES OF NETWORKSTYPES OF NETWORKS

LAN (LOCAL AREA NETWORK)LAN (LOCAL AREA NETWORK)

MAN (METROPOLITAN AREA NETWORK)MAN (METROPOLITAN AREA NETWORK)

WAN (WIDE AREA NETWORK)WAN (WIDE AREA NETWORK)


THE CONNECTION MEDIUMTHE CONNECTION MEDIUM

WIRED WIRELESS

TYPES OF WIRED NETWORK MEDIUM

TWISTED PAIR CABLE (SHIELDED & UNSHIELDED)

FIBRE OPTICS CABLE

COAXIAL CABLE

TYPES OF WIRELESS NETWORK MEDIUM

SATELLITE

VSAT

FWA

BLUETOOTH

INFRARED


CREATING YOU OWN NETWORK TWISTED PAIR CABLES

CABLE TYPES1.STRAIGHT/NORMAL NETWORK CABLE (USED TO CONNECT PC TO HUB, SWITCH TO ROUTER,

GENERALLY NETWORK DEVICES NOT OF THE SAME ORDER)

2. CROSSED NETWORK CABLE(USED TO CONNECT PC TO PC, HUB TO HUB, SWITCH TO

SWTICH, ROUTER TO ROUTER, GENERALLY NETWORK DEVICES OF THE SAME ORDER)

3. ROLLOVER CABLE


Tools and materialsWe will need:

1.RJ45 Crimp tool2.Scissors or cutter

3.Hobby knife (or other sharp knife will do too)4.UTP/RJ45 connectors5.Piece of CAT-5 cable


HOW TO CREATE A STRAIGHT CABLE? STEP 1:

First we strip the outer protection layer of the cable, easiest done by using a simple sharp knife. Be careful not to

damage the inner wires when doing so.

You do NOT need to strip the individual wires!

Set the wires in the order described below. This order must be used on both

cable ends.

Now hold the wires next to each other and use the scissors to cut them in 1 cut

to the same length.CISCO CERTIFIED NETWORK ASSOCIATE (CCNA)

1: Orange-White1: Orange-White2: Orange2: Orange3: Green-White3: Green-White4: Blue4: Blue5: Blue-White5: Blue-White6: Green6: Green7: Brown-White7: Brown-White8: Brown8: Brown


STEP 2:

Now gently shift the RJ45 over the wires.

Pay attention to these points:- Hold the connector as show in the

images- Keep the wires in the proper order NEXT

to each other- Make sure the wires go into the RJ45 as

far as possible.

Tip: Make sure the mantel of the cable also goes into the connector, so it will be

crimped into the connector as well.


STEP 3:

Now we can crimp the connector using the RJ45-crimptool.

Tip: Before crimping the connector, make sure the colors are in the right order.

With most RJ45-crimptools, you might need to squeeze more than once, just to make sure the connector is connected properly.

Now repeat these steps for the other end of the cable as well, and your cable will be

finished.


HOW TO CREATE A CROSSED CABLE?A crossed cable is created in the same way

as a straight cable, with one minor difference.

Step 1:For one end of the cable, do the steps as

described for the straight cable.Note: ONLY for ONE end of the cable!

Step 2:The other end is being done in the same

way, only with this difference that the order of the wires should be different:


1: Green-White2: Green3: Orange-White4: Blue5: Blue-White6: Orange7: Brown-White8: Brown

Note: Only for ONE end of the cable! The other end needs to be done in the same way as for a straight

cable.


Step 2:

Crimp the connector to the cable as done with a straight cable. Make sure you use the different order of the wires as shown below.


CONFIGURING IP ADDRESSES ON YOUR NETWORK

SETTING UP YOUR COMPUTER FOR HOME NETWORKING USING THE NETWORK SETUP WIZARD

LETS SEE IT WORK

DATA SHARING

RESOURCE SHARING

THAT’S PURE NETWORKING THAT’S PURE NETWORKING FOR YOUFOR YOU

ALRIGHT, LETS GET DOWN TO CISCO NETWORKING,

BECOMING A KING IN ROUTING AND SWITCHING

Cisco—A Brief History

CONTENTS AT A GLANCEINTERNETWORKING

INTERNET PROTOCOLS IP SUBNETTING AND VARIABLE LENGTH SUBNET

MASKS (VLSMS) INTRODUCTION TO THE CISCO IOS

IP ROUTINGENHANCED IGRP (EIGRP) AND OPEN SHORTEST

PATH FIRST (OSPF) LAYER 2 SWITCHING

VIRTUAL LANS (VLANS) MANAGING A CISCO INTERNETWORK

MANAGING TRAFFIC WITH ACCESS LISTSWIDE AREA NETWORKING PROTOCOLS

MATERIALS ESSENTIAL TO THIS MATERIALS ESSENTIAL TO THIS CERTIFICATIONCERTIFICATION

SYBEX CCNA STUDY GUIDE, 5SYBEX CCNA STUDY GUIDE, 5THTH EDITION, 2005 BY EDITION, 2005 BY TODD LAMMLETODD LAMMLE

SYBEX CCNA FAST PASS BY TODD LAMMLESYBEX CCNA FAST PASS BY TODD LAMMLE NETWORK VISUALIZER ROUTER SIMULATOR 4.0.6NETWORK VISUALIZER ROUTER SIMULATOR 4.0.6 PASS4SURE EXAM SIMULATOR 2.75PASS4SURE EXAM SIMULATOR 2.75 TESTKING 640-801 VERSION 114TESTKING 640-801 VERSION 114 BOOK ON NETWORKING (MCSE)BOOK ON NETWORKING (MCSE) CISCO NETWORKING ESSENTIALSCISCO NETWORKING ESSENTIALS ADOBE READER 7.0.8ADOBE READER 7.0.8

ENOUGH OF MUCH TALK, ENOUGH OF MUCH TALK, LET’S GET STARTEDLET’S GET STARTED

networking seminar

Documents

network devices

wirelessa network

crossed network cableused

straight cable

cable ends

inner wires

individual wires

rj45 crimp toolscissors