132

¿Habla Español? (855) 456-2288(800) 222-5664 For Customer Service

ENGINE

1

2

Oil Filter1957-72 F100 F250

A good oil filter will trap up to 90% of damaging dirt particles. It is recommended to change the oil and oil filter every 3,000 miles. If the oil filter is not changed at recommended intervals it could become clogged, al lowing unfiltered oil to circulate throughout the engine, leading to expensive repairs. The cleaner the oil is, the cooler the engine will run.

Engine Block Heaters

A pre-heated engine saves on fuel costs, starts quicker, runs smoother, warms cab interior, defrosts quicker and reduces engine wear and tear.

Note: "A" Fits V8 models without 302 engine.

Engine Block Heaters are complete with cord and detailed easy-to-follow instructions for a simple installation directly into your engine block

40-4851

40-4855

Harmonic Balancer1965-72 F100 F250

43-7844

Harmonic Balancer PullerRemoves harmonic balancer from engine without risk of damage. Four-slot, heavy-duty yoke handles any pulling job. Extra-long center screw is machined for use with included adaptor tip that centers puller on crankshaft for quick and damage-free removal. Includes five sets of hardened, flange-head bolts in standard and metric thread sizes for most engines. Order today!

Harmonic Balancer InstallerThreaded forcing screw uses a bearing to easily slide harmonic balancer into place. Includes five standard and seven metric threaded adaptors for use on a wide range of engines.

Note: "A" With integral 3-groove pulley. All three pulleys measure 6-11/16" OD. "B" With integral 3-groove pulley. Outer pulley measures 6-5/16" OD. Inner

two pulleys measure 6-11/16" OD. "C" With integral single groove pulley.

Spin-on Oil Filter Adaptor

Convert early Ford engines that came with a canister-style oil filter to a spin-on oil filter. Adaptor makes oil filter changes cleaner, easier and faster. Oil filter not included. Use spin-on oil filter, #43-5632.

43-5632

43-5628

43-5629

38-1222-F

38-1223-F

PART ILL# DESCRIPTION APPLICATION REQD PRICE

6 Cylinder43-5631 (1) OIL FILTER CARTRIDGE 6CYL 57-60 (1) $9.9543-5632 (2) SPIN-ON OIL FILTER 6CYL 57-64 (1) $4.95 43-5632 SPIN-ON OIL FILTER 240 300 65-72 (1) $4.95

V843-5632 SPIN-ON OIL FILTER V8 63-72 (1) $4.9543-5631 OIL FILTER CARTRIDGE W/4WD 352 65-67 (1) $9.95

PART DESCRIPTION APPLICATION REQD PRICE40-4852 ENGINE BLOCK HEATER KIT 6CYL F100 F250 65-72 (1) $32.9540-4851 ENGINE BLOCK HEATER KIT "A" V8 F100 F250 57-72 (1) $32.9540-4850 ENGINE BLOCK HEATER KIT 302 F100 F250 70-72 (1) $32.95 40-4855 REPLACEMENT CORD F100 F250 57-72 (AR) $15.95

PART DESCRIPTION APPLICATION REQD PRICE43-7844 HARMONIC BALANCER "A" 300 F100 F250 65-71 (1) $99.9543-7858 HARMONIC BALANCER "B" 240 300 F100 F250 65-72 (1) $224.95 43-7840 HARMONIC BALANCER 302 F100 F250 70-72 (1) $119.9543-7837 HARMONIC BALANCER "C" 352 F100 F250 65-67 (1) $179.9543-7848 HARMONIC BALANCER 360 390 F100 F250 68-72 (1) $104.95

PART DESCRIPTION APPLICATION REQD PRICE38-1222-F HARMONIC BALANCER PULLER                 (1) $19.95

PART DESCRIPTION APPLICATION REQD PRICE38-1223-F HARMONIC BALANCER INSTALLER                 (1) $69.95

PART DESCRIPTION APPLICATION REQD PRICE43-5628 SPIN-ON OIL FILTER ADAPTOR 57-64 (1) $22.9543-5629 SPIN-ON OIL FILTER ADAPTOR 352 360 390 65-72 (1) $62.9543-5632 SPIN-ON OIL FILTER 57-72 (1) $4.95

PART DESCRIPTION PRICE38-1278-F REMOTE STARTER SWITCH $9.95

Remote Starter Switch

Remote Starter Switch allows you to start or crank your engine without help. Ideal for conducting compression tests or bumping engine to top dead center for valve, distributor or camshaft adjustment. 36" long leads have alligator clips with insulated boots and feature a push button style switch and grip.