operating and installation instructions built-in coffee ... · the cleaning tablets for degreasing...

Operating and installation instructionsBuilt-in coffee machine

To avoid the risk of accidents or damage to the appliance it is essentialto read these instructions before it is installed and used for the first time.

en – GB M.-Nr. 10 213 550

Packaging material / Disposal of old machine

2

Disposal of the packingmaterialThe packaging is designed to protectthe machine from damage duringtransportation. The packaging materialsused are selected from materials whichare environmentally friendly for disposaland should be recycled.

Recycling the packaging reduces theuse of raw materials in themanufacturing process and alsoreduces the amount of waste in landfillsites.

Disposing of your old machineElectrical and electronic machines oftencontain valuable materials. They alsocontain materials which, if handled ordisposed of incorrectly, could bepotentially hazardous to human healthand to the environment. They are,however, essential for the correctfunctioning of your machine. Please donot therefore dispose of it with yourhousehold waste.

Please dispose of it at your localcommunity waste collection / recyclingcentre or contact your dealer foradvice.

Ensure that it presents no danger tochildren while being stored for disposal.

Contents

3

Packaging material / Disposal of old machine ................................................... 2

Warning and Safety instructions .......................................................................... 6

Guide to the machine .......................................................................................... 16

Controls and display ............................................................................................ 18

Accessories .......................................................................................................... 19

Using for the first time......................................................................................... 20Before using for the first time................................................................................. 20Switching on for the first time................................................................................ 20Water hardness ...................................................................................................... 21

Operation .............................................................................................................. 23

Filling the water container................................................................................... 24

Filling the coffee bean container ........................................................................ 25

Switching on and off ............................................................................................ 26

Adjusting the central spout to the correct cup height ..................................... 27

Making drinks ....................................................................................................... 28Making a coffee ..................................................................................................... 28Making two portions .............................................................................................. 29Cancelling preparation ........................................................................................... 29Dispensing several cups of coffee one after the other - Coffee pot ...................... 30Making coffee with ground coffee ......................................................................... 30Drinks with milk...................................................................................................... 32Dispensing hot water ............................................................................................. 33Making drinks using a profile ................................................................................. 34After making drinks ................................................................................................ 34

Coffee the way you like it .................................................................................... 35Grinder setting ....................................................................................................... 35Displaying and changing the parameters of a drink .............................................. 36

Amount of coffee .............................................................................................. 36Brewing temperature ........................................................................................ 37Pre-brewing the coffee ..................................................................................... 37

Portion size ........................................................................................................... 38

Contents

4

Profiles .................................................................................................................. 40Opening a profile.................................................................................................... 40

Creating a profile............................................................................................... 40Selecting a profile ............................................................................................. 41Changing the name........................................................................................... 41Deleting a profile ............................................................................................... 41Changing a profile............................................................................................. 42

Settings ................................................................................................................. 43Opening the Settings menu ................................................................................... 43Changing and saving settings................................................................................ 43Possible setting options......................................................................................... 44Language ............................................................................................................... 46Time ....................................................................................................................... 46Date........................................................................................................................ 46Timer ...................................................................................................................... 46Eco mode............................................................................................................... 48Lighting .................................................................................................................. 49Info (display information)........................................................................................ 49Locking the coffee machine (System lock )........................................................ 50Water hardness ...................................................................................................... 50Display brightness ................................................................................................. 50Volume ................................................................................................................... 50Factory default ....................................................................................................... 51Demo mode (Showroom programme) ................................................................... 51

Cleaning and care ................................................................................................ 52Quick guide............................................................................................................ 52Cleaning by hand or in the dishwasher.................................................................. 53Drip tray ................................................................................................................. 55Drip tray cover........................................................................................................ 56Water container...................................................................................................... 56Waste container ..................................................................................................... 57Central spout ......................................................................................................... 57Maintenance of the milk valve ............................................................................... 59Milk flask and lid .................................................................................................... 60Coffee bean container ........................................................................................... 61Interior and machine front...................................................................................... 62Central spout connector ........................................................................................ 62Brew unit ................................................................................................................ 63

Removing and cleaning the brew unit by hand ................................................ 63Maintenance programmes ..................................................................................... 64

Opening the "Maintenance" menu.................................................................... 64

Contents

5

Rinsing the machine .............................................................................................. 65Rinsing the milk pipework...................................................................................... 65Cleaning the milk pipework.................................................................................... 66Degreasing the brew unit ....................................................................................... 68

Descaling the machine ........................................................................................ 69

Problem solving guide ......................................................................................... 73Messages in the display ........................................................................................ 73Unusual performance of the coffee machine......................................................... 76Unsatisfactory results ............................................................................................ 81Problems when heating up or frothing milk ........................................................... 83Replacing the angled connector ............................................................................ 84

After Sales / Guarantee ....................................................................................... 86

Saving energy ....................................................................................................... 87

Electrical connection ........................................................................................... 88

Installation ............................................................................................................ 89Building-in and combination options..................................................................... 89Ventilation .............................................................................................................. 90Building in the coffee machine............................................................................... 91Adjusting the hinges .............................................................................................. 92

Warning and Safety instructions

6

This coffee machine complies with current safety requirements.Improper use can, however, present a risk of both personal injuryand material damage.

To avoid the risk of accidents and damage to the machine, pleaseread these instructions carefully before using it for the first time.They contain important notes on installation, safety, use andmaintenance.Miele cannot be held liable for damage caused by non-compliance with these instructions.

Keep these instructions in a safe place and pass them on to anyfuture owner.


7

Correct application

This coffee machine is intended for use in domestic householdsand similar working and residential environments.Examples of a working or residential environment include

– shops, offices and other working environments,

– small businesses, showrooms etc.,

– where the coffee machine is being used by customers in hotels,motels, bed and breakfast and other similar establishments.

This coffee machine is not intended for outdoor use.

It must only be used as a domestic appliance to make espresso,cappuccino, latte macchiato etc. Any other use is not permitted.

This coffee machine can only be used by people with reducedphysical, sensory or mental capabilities, or lack of experience andknowledge, if they are supervised whilst using it, or have beenshown how to use it in a safe way and recognise and understand theconsequences of incorrect operation.


8

Safety with children

Caution! Danger of burning and scalding on the dispensingspouts.

Children's skin is far more sensitive to high temperatures than thatof adults.

Ensure children do not touch hot surfaces of the coffee machineor place parts of their body under the dispensing spouts.

Install the coffee machine where it is out of the reach of children.

Children under 8 years of age must be kept away from themachine unless they are constantly supervised.

Children 8 years and older may only use the coffee machineunsupervised if they have been shown how to use it safely andrecognise and understand the consequences of incorrect operation.

Please supervise children in the vicinity of the coffee machine anddo not allow them to play with it.

Children must not be allowed to clean the coffee machineunsupervised.

Remember that coffee and espresso are not suitable drinks forchildren.

Danger of suffocation. Packaging, e.g. plastic wrappings, must be kept out of the reach ofbabies and children. Whilst playing, they could become entangled inpackaging or pull it over their head and suffocate.


9

Technical safety

Installation and repairs may only be carried out by a Mieleauthorised service technician. Installation, repairs and other work byunqualified persons can cause considerable danger to users.

A damaged coffee machine could be dangerous. Before buildingin the machine, check it for any externally visible damage. Do notuse a damaged machine.

To avoid the risk of damage to the machine, make sure theconnection data (voltage and frequency) on the data platecorresponds to the household supply, before connecting themachine to the mains supply. Consult a qualified electrician if in anydoubt.

The electrical safety of this coffee machine can only beguaranteed when correctly earthed. It is essential that this standardsafety requirement is met. If in any doubt please have the electricalinstallation tested by a qualified electrician.

Reliable and safe operation of the coffee machine can only beguaranteed if it is connected to the mains electrical supply.

Do not connect the machine to the mains electricity supply by amulti-socket adapter or an extension lead. These are a fire hazardand do not guarantee the required safety of the appliance.

The coffee machine must not be used in a non-stationary location(e.g. on a ship).

For safety reasons, this machine may only be used when it hasbeen built in.

If the coffee machine is to be built in above another appliance,there must be a full-width, closed shelf between them.

Only use the coffee machine in rooms where the ambienttemperature is between +10 °C and +38 °C.


10

Do not cover or block the ventilation gaps.This would prevent adequate ventilation. Condensation can damagethe coffee machine or the furniture housing unit.

Ensure that there is sufficient ventilation around the coffeemachine. The ventilation gaps in the furniture housing unit and thegap between the top of the housing unit and the ceiling must be atleast 200 cm2. Otherwise condensation can build up and damagethe machine or the housing unit.

If the coffee machine is built-in behind a kitchen furniture door, itmay only be used with the furniture door open. This will prevent theformation of heat and humidity and subsequent damage to themachine and/or furniture unit. Do not close the furniture door whilethe coffee machine is in use. Ensure the coffee machine has cooleddown completely before closing the furniture door.

Repairs may only be carried out by a Miele authorised servicetechnician. Repairs by unqualified persons can cause considerabledanger to the user.

The coffee machine must be disconnected from the electricitysupply during repair work.

While the machine is under guarantee, repairs should only beundertaken by a Miele authorised service technician. Otherwise theguarantee is invalidated.

Faulty components must only be replaced by genuine MieleOriginal spare parts. The manufacturer can only guarantee the safetyof the machine when Miele replacement parts are used.

Never open the outer casing of the machine. Tampering withelectrical connections or components and mechanical parts is highlydangerous to the user and can cause operational faults or electricshock.


11

Only use genuine original Miele accessories with this machine.Using spare parts or accessories from other manufacturers willinvalidate the guarantee, and Miele cannot accept liability.


12

Correct use

The spouts present a danger of burning or scalding.The liquids and steam dispensed are very hot.

Please note:

– Keep well away from the area underneath the spouts when hotliquids and steam are being dispensed.

– Do not touch hot components.

– Hot liquid or steam could spatter from the spouts. Ensure that thecentral spout is clean and fitted correctly.

– Water in the drip tray can also be very hot. Take care whenemptying it.

Never look directly at the lighting or use optical instruments tolook at it.

Please note the following regarding water:

– Only use cold, fresh tap water to fill the water container. Hot orwarm water or other liquids could damage the coffee machine.

– Change the water every day to prevent a build-up of bacteria.

– Do not use mineral water. Mineral water will cause seriouslimescale deposits to build up in your machine and damage it.

– Do not use water from a reverse osmosis unit in this machine.This would damage it.

Only fill the bean container with roasted espresso/coffee beans.Do not fill the bean container with coffee beans which have beentreated with additives or with ground coffee.Do not fill the bean container with any type of liquid.


13

Do not use green (unroasted) coffee beans or mixtures of coffeebeans which contain green coffee beans. Green coffee beans arevery hard and still contain a certain amount of residual moisture.These can damage the coffee machine grinder as soon as grindingbegins.

Do not use coffee beans which have been treated with caramel,sugar or other substances including sugary liquids. Sugar willdamage the coffee machine.

Only add ground coffee or the Miele cleaning tablets fordegreasing the brew unit to the ground coffee chute.

Do not use any caramelised ready ground coffee. The sugar in thecoffee will stick to and block the brew unit of the coffee machine.The cleaning tablets for degreasing the brew unit will not remove thistype of deposit.

Only use milk without additives. Additives in milk usually containsugar and this will stick to the milk pipework.

If using dairy milk make sure that it has been pasteurised.

Do not place any alcohol mixtures which are alight underneath thecentral spout. The flames could ignite plastic components andcause them to melt.

Do not swing from or hang anything on the machine front when itis open as this could damage the hinges on the coffee machine.

The central spout connector cap is lubricated with siliconegrease. Take care not to get this on your clothes when removing orreplacing the containers or other components.

The machine must not be used for cleaning objects.


14

Cleaning and care

The coffee machine must be disconnected from the electricitysupply before cleaning or maintenance.

Clean the coffee machine and the milk flask thoroughly beforeusing for the first time (see "Cleaning and care").

All parts of the milk system need to be cleaned thoroughly andregularly. Milk contains bacteria which proliferate rapidly withinadequate cleaning.

Do not use a steam cleaner to clean this machine. Steam couldreach electrical components and cause a short circuit.

Descale the coffee machine regularly depending on the waterhardness level in your area. Descale the machine more frequently inareas with very hard water. Miele cannot be held liable for damagearising from insufficient descaling, the use of incorrect descalingagent or the use of descaling agent which is not of the appropriateconcentration.

Degrease the brew unit regularly with Miele cleaning tablets.Depending on the natural oil content of the coffee used, the brewunit can become blocked quite quickly.

Used coffee grounds should be disposed of with the organicrubbish or on the compost heap. Do not empty them down the sink,as they could block it.


15

For machines with stainless steel surfaces:

Do not use sticky notes, transparent adhesive tape, masking tapeor other types of adhesive on stainless steel surfaces. Thesedamage the surface, causing it to lose its dirt repellent protectivecoating.

The finish on stainless steel surfaces is susceptible to scratching.Even magnets can cause scratching.

Guide to the machine

16

Exterior view

a On/Off sensor

b Controls and display

c Handle

d Hot water spout

e Drip tray cover

f Height-adjustable central spout with lighting

g Milk flask and lid

Guide to the machine

17

Interior view

h Ground coffee chute cover

i Brew unit

j Ground coffee chute

k Slide control to select fineness of ground coffee

l Coffee bean container

mWater container

n Drip tray with grid

oWaste container

p Drip catcher

q Central spout connector

r Maintenance panel

Controls and display

18

a On/Off sensor For switching the coffee machine onand off

b Drink sensorsFor making Espresso , Coffee ,Cappuccino or Latte macchiato

c Further programmes Other drinks such as Long coffee,Caffè latte, hot milk, milk froth andhot water,Maintenance menu

d DisplayShows information about the currentaction or status

e Back For returning to the previous menu,cancelling unwanted actions

f Arrow sensors For displaying further options andhighlighting a selection

g OK sensorFor confirming display messages andsaving settings

h Profiles For saving and editing profiles

i Settings For altering settings, displayinginformation or checking whichsettings are currently active

j Two portions For making two portions of a drink

k Parameters Settings for checking or alteringcoffee preparation

l Optical interface(for Miele service technician use only)

Accessories

19

These products and other usefulaccessories can be ordered via theinternet, from Miele (see back cover forcontact details) or from your Mieledealer.

Accessories supplied– Measuring spoon

for ground coffee

– Milk flask with lidfor storing milk and heating/frothingmilk

– Cleaning agent for milk pipeworkfor cleaning the milk system (Starterset)

– 2 containers (large and small)for cleaning and maintenance of themachine

– Descaling tabletsfor descaling the water pipework(Starter set)

– Cleaning tabletsfor degreasing the brew unit (Starter set)

– Test stripsfor determining the water hardnesslevel

– Silicone greasefor lubricating the cap on the centralspout connector

– Cleaning brushfor cleaning the milk pipework

– Central spout connector capReplacement part

– Angled connector for milkpipeworkReplacement part

Optional accessoriesMiele accessories and cleaning andconditioning products are available foryour coffee machine.

– Microfibre clothfor removing finger marks and lightsoiling

– Milk flask with lidfor storing milk and heating/frothingmilk

– Small lidFor storing the milk flask in the fridge

– Cleaning agent for milk pipeworkfor cleaning the milk system

– Descaling tabletsfor descaling the water pipework

– Cleaning tabletsfor degreasing the brew unit

– Silicone greasefor lubricating the cap on the centralspout connector

Using for the first time

20

Please read the operatinginstructions carefully and take thetime to familiarise yourself with thecoffee machine before using it forthe first time.

Before using for the first time Install the coffee machine and

connect it to the electricity supply(see "Electrical connection" and"Installation").

Remove any protective foil.

Clean the machine thoroughly beforefilling it with water and coffee beans(see "Cleaning and care").

Switching on for the first timeWhen you switch the coffee machineon for the first time, after the welcomescreen has appeared you will beprompted to set the following:

– Language and country

– Date

– Time

– Display (Time of day display)

Touch the On/Off sensor .

The welcome message Miele -Willkommen will appear in the displaybriefly.

Select language

Use the arrow sensors tohighlight the required language. Touch OK.

Use the arrow sensors tohighlight the required country.Touch OK.

The setting is now saved.

Setting the time

Use the arrow sensors until thecurrent time of day appears.Touch OK.


Setting the date

Use the arrow sensors until thecurrent date is set. Touch OK to confirm the year, monthand day.



21

Display

You can choose from the followingoptions:

– On: The time and date are alwaysvisible in the display when themachine is switched off.

– Off: The display is dark when themachine is switched off.

– Night dimming: The date and the timeare only displayed between the hoursof 5:00 and 23:00.

Use the arrow sensors tohighlight the required language.Touch OK.

The coffee machine will use moreenergy depending on the option youchoose for the display. Informationabout this will appear in the display.

The coffee machine is now successfullyset up for use.

Fill the water container with fresh,cold tap water.

Water hardnessThe water hardness level indicates howmuch calcium is dissolved in the water.The higher the calcium content, theharder the water, and the harder thewater, the more often the coffeemachine will need to be descaled.

The coffee machine measures theamount of water used and steam made.Depending on the level of waterhardness set, more or fewer drinks canbe dispensed before the machineneeds to be descaled.

Programme the coffee machine to thewater hardness level of your area sothat it functions correctly and does notget damaged. A prompt to descale themachine will then appear in the displayat the correct time.

The machine has four programmablelevels:

Water hardness Localwaterhardnesslevel

Setting (waterhardnesslevel)

0 - 8.4 °dH (0 -1.5 mmol/l)

Soft Soft 1

8.4 - 14 °dH(1.5 - 2.5 mmol/l)

Medium Medium 2

14 - 21 °dH(2.5 - 3.7 mmol/l)

Hard Hard 3

> 21 °dH(> 3.7 mmol/l)

Hard Very hard 4


22

Measuring the water hardness level

You can determine the water hardnessyourself using the enclosed test strip.Alternatively, your local water authoritywill be able to tell you the hardness ofwater in your area.

Dip the test strip in your drinkingwater for approximately one second,then shake off any excess water. Theresult will be evident after abouta minute.

Setting the water hardness level

Touch .

Select Water hardness with the arrowsensors and touch OK.

Use the arrow sensors tohighlight the required water hardness.Then touch OK.


Operation

23

To operate the coffee machine, touchthe sensors with your finger.

You are in the drinks menu when thedisplay shows:

Miele

Select drink

To make a drink, touch one of thedrinks sensors.

You can find more drinks in the Furtherprogrammes menu.

Selecting a menu andnavigating within a menuTo select a menu, touch the relevantsensor. You will then be able to start anaction or change settings in the menu.

Settings

TimeDate

Language

A bar on the right-hand side indicatesthat further options or text are available.Use the arrow sensors to showthese.

The setting which is currently selectedwill have a tick beside it.

To select an option, touch the arrowsensors until the option you wantis highlighted.

Touch OK to confirm your selection.

Exiting a menu or cancellingan actionTo exit the current menu, touch .

Filling the water container

24

Change the water every day toprevent a build-up of bacteria.

Only use cold, fresh tap water to fillthe water container.Hot or warm water or other liquidscan damage the coffee machine.

Do not use mineral water. Mineralwater will cause serious limescaledeposits to build up in your machineand damage it.

Open the front of the coffee machine.

Pull the water container forwards toremove it.

Take off the lid and fill the watercontainer with fresh, cold tap waterup to the "max." mark.

Push the water container into themachine until it clicks into place.

If the water container protrudesslighlty or is a little high, checkwhether the surface that the watercontainer sits on is dirty. If the watercontainer is not positioned correctly,the outlet valve will not connectproperly and could leak. Clean thesurface, if necessary.

Filling the coffee bean container

25

Fill the coffee bean container withroasted coffee or espresso beans if youwant to use freshly ground coffeebeans for each cup of espresso orcoffee.

Alternatively, you can make coffee orespresso with ready ground coffee (see"Making coffee or espresso using readyground coffee").

Warning. Risk of damage to thegrinder.Only put roasted coffee or espressobeans in the container. Anythingelse, including ground coffee, willdamage the grinder.Do not fill the bean container withany type of liquid.

Warning. Sugar will damage thecoffee machine.Do not use coffee beans that havebeen treated with sugar, caramel orother substances and do not putliquids containing sugar in the coffeebean container.Do not use green (unroasted) coffeebeans or mixtures of coffee beanswhich contain green coffee beans.Green coffee beans are very hardand still contain residual moisture.These can damage the coffeemachine grinder as soon as grindingbegins.

Tip: You can use a nut or seed grinderto grind green coffee beans. Thesetypes of grinder generally have arotating stainless steel blade. You canthen add the ground green coffee oneportion at a time to the ground coffeechute and make the desired coffeedrink (see "Making espresso and coffeeusing ready ground coffee").

Pull out the coffee bean container.

Push back the lid and fill thecontainer with roasted coffee beans.

Slide the lid back into place.

Push the coffee bean container fullyback into the coffee machine. Closethe front.

Switching on and off

26

Switching onWhen the coffee machine is switchedon, it heats up and rinses the pipework.This not only cleans the pipework, butalso warms it before coffee is prepared.

If the coffee machine still has anoperating temperature higher than60 °C, then rinsing will not take place.

Touch the On/Off sensor .

The machine will begin rinsing after theheating-up phase. Hot water will comeout of the central spout.

You can now make drinks.

Tip: If you do not want the water fromthe rinsing process to flow into the driptray, place a suitable container (e.g. thesmall cleaning container) underneaththe central spout before making the firstcoffee of the day.

Switching off Touch the On/Off sensor .

If coffee has been dispensed, thecoffee machine will rinse the coffeepipework automatically beforeswitching off.

Switching off for longerperiods of timeIf the coffee machine is not going to beused for a longer period of time:

Empty the drip tray, the wastecontainer and the water container.

Clean all components thoroughly,including the brew unit, the centralspout connector and the drip catcherin the machine front.

Switch off the machine.

If you are leaving the front openwhile the coffee machine is not beingused for a long time, disconnect itfrom the mains electricity supply tosave energy.

Adjusting the central spout to the correct cup height

27

You can adjust the central spout to suitthe height of the cup you are using sothat the coffee or espresso will not cooldown as quickly and the crema willhave a better consistency.

Pull the central spout down until it isat the same level as the rim of thecup.Alternatively, push the central spoutup until there is enough room to fit alarger cup or mug underneath.

Making drinks

28

The spouts present a danger ofburning or scalding.The liquids and steam dispensed arevery hot.Keep well away from the areaunderneath the spouts when hotliquids and steam are beingdispensed.Do not touch hot components.

The following drinks can be made:

– Espresso . This is a strong,aromatic coffee with a thick hazelnutbrown coloured layer of froth - knownas the crema - on top. When making espresso, useespresso roast coffee beans.

– Coffee . This differs from espressoby the increased amount of waterand the roast of the beans.Use coffee beans of the correct roastto make coffee.

– Long coffee is a coffee withconsiderably more water.

Making a coffee

Place a cup under the central spout.

Touch the sensor for the drink youwant: Espresso Coffee in Further programmes: Long coffee

The coffee or espresso will bedispensed from the central spout intothe cup.

To ensure that any coffee residuesfrom the factory testing process areremoved from the brewing system,please throw away the first two cupsof coffee when using the coffeemachine for the first time.

Making drinks

29

Making two portionsYou can dispense two portions ofespresso or coffee at once either intoone cup or two separate cups.

To fill two cups at the same time:

Place a cup under each of the coffeedispensers in the central spout.

Touch .

The sensor will light up.

Touch the sensor for the drink youwant.

Two portions of the desired drink will bedispensed from the central spout.

After a while, if you have not touchedone of the drinks sensors, the "Twoportions" option will revert to singleportions.

Cancelling preparationDrink preparation can be cancelledwhile Stop is showing in the display.

Touch OK.

When making two portions at oncetouching the OK sensor once will onlystop the first drink. To stop both drinks, touch OK forlonger.

Making drinks

30

Dispensing several cups ofcoffee one after the other -Coffee potYou can make several cups of coffeeone after the other automatically withthe Coffee pot function (max. 1 litre). Upto eight cups can be made in this way.

You can use the Coffee pot functiontwice in a row. After this the coffeemachine will need a longer coolingdown time of an hour in order to avoidit being damaged.

Place a sufficiently large containerunder the central spout.

Touch .

Use the arrow sensors tohighlight Coffee pot. Touch OK.

Use the arrow sensors tohighlight the number of cups youwant (3 to 8). Touch OK.

Follow the instructions in the display.

The coffee for each cup is individuallyground, brewed and dispensed. Eachstage of the process is shown in thedisplay.

You can cancel the process at any timeby:

Touching OK or .

Making coffee with groundcoffeeTo make coffee using ready groundcoffee, add a portion of ground coffeeto the ground coffee chute.This gives you the option of making a

cup of decaffeinated coffee, forexample, even though the coffee beancontainer is filled with roasted coffeebeans.

The coffee machine will recogniseautomatically that ready ground coffeehas been added to the ground coffeechute.

Only one portion of coffee or espressocan be made at a time when usingground coffee.

Adding ground coffee

Do not add more than one levelscoop of ground coffee to the coffeechute. If too much is added, thebrew unit will not be able to processthe coffee.

The coffee machine will use all theground coffee which has been added tothe chute to make the next coffee.

Use the measuring spoon supplied sothat the correct amount is used.

Making drinks

31


Remove the cover to the groundcoffee chute and open the lid.

Add one level spoon of ready groundcoffee to the chute.

Close the lid. Push the cover into themachine. Close the front.

Use ground coffee? will appear in thedisplay.

Making coffee with ground coffee

If you want to make a drink with groundcoffee:

Select Yes with the arrowsensors . Touch OK.

You can now select which type of drinkyou would like to make with groundcoffee.


Select the type of coffee you want.

The coffee machine will now make thedrink you have chosen.

If you do not want to use ground coffeeto make the drink:

Select No with the arrow sensors and touch OK.

The ground coffee will be directed intothe waste container.

If no drink is selected within approx.15 seconds, the ground coffee willalso be directed into the wastecontainer.

Making drinks

32

Drinks with milk

Danger of burning and scaldingon the central spout.The liquids and steam dispensed arevery hot.

Do not use milk with additives. Mostadditives contain sugar which willstick to the milk pipework anddamage the machine.If using dairy milk make sure that ithas been pasteurised.

The following drinks with milk can bemade:

– Cappuccino consisting of approx.2/3 milk froth and 1/3 espresso.

– Latte macchiato consisting of 1/3each of hot milk, milk froth andespresso.

– Caffè latte consisting of hotmilch and espresso.

Hot milk or milk froth can also bemade.

Notes on the milk flask

Milk is not cooled in the milk flask.Therefore, place the milk flask in therefrigerator if you are not going to usemilk for a while. Good milk froth canonly be achieved when cold milkbelow 10 °C is used.

a Lid

b Sensor

c Milk suction tube

d Glass flask Fill the milk flask with milk up to max.

2 cm below the rim. Close the milkflask with the lid.

It is important to keep the openingand neck of the milk flask clean(whilst filling it and carrying it). If theflask is dirty it could cause a fault inthe machine.

Making drinks

33

Push the milk flask fully back into thecoffee machine.

Making drinks with milk

Place a suitable container underneaththe central spout.

Touch the sensor for the drink youwant: Cappuccino Latte macchiato in Further programmes: Caffè Latte,hot milk, milk froth

The selected drink will now be made.

Dispensing hot water

Danger of burning and scalding onthe hot water spout. The waterdispensed is very hot.

Please note that the water dispensedis not hot enough for making tea.

Place a suitable container underneaththe hot water spout.

Touch .

Touch the arrow sensors untilHot water is highlighted. Touch OK.

Hot water is dispensed into thecontainer under the spout.

To cancel preparation:

Touch OK.

Preparation of hot water will becancelled.

Making drinks

34

Making drinks using a profileIf you have already created a specificuser profile, you can select this beforeyou make a drink.

Touch .

Touch Select profile.

Touch the arrow sensors untilthe profile you want is highlighted.Touch OK.

The name of the profile selected will beshown in the top left of the display.

You can now make the drink you want.

After making drinksIf you have made a drink with milk, Startrinse cycle will appear in the display aftera while.

Touch OK.

The milk pipework will now be rinsed.

Even if you do not confirm themessage with "OK", the coffeemachine will rinse the milk pipeworkafter a few minutes automatically.

Tip: Remove the milk flask and rinsethe lid under running water. Then fit thesmall lid to the milk flask and store theflask in the fridge until it is neededagain.You can only achieve good quality milkfroth with milk which is cold (< 10 °C).

The small milk flask lid is available toorder from your Miele Dealer, Miele orvia the internet at www.miele-shop.com.

Coffee the way you like it

35

To set the coffee machine up for thetype of coffee you are using, you can

– change the grinder setting,

– change the amount of coffee,

– set the brewing temperature, or

– pre-brew the ground coffee.

Grinder settingWhen the beans are ground correctly,the coffee or espresso will flow evenlyinto the cup with a good crema.The crema should have an even nut-brown colour.

The grinder setting you select will beused for all coffee drinks.

There are various ways to tell whetherthe coffee grinder is set correctly.

The coffee has been too coarselyground if:

– Espresso or coffee flows into the cuptoo quickly.

– The crema is very pale and uneven.

Set a finer grinder setting.

The coffee has been too finely groundif:

– Espresso or coffee only trickles intothe cup.

– The crema is dark brown.

Set a coarser grinder setting.

To avoid damaging the grinder,please note the following:Only adjust the grinder one setting ata time.Grind the coffee beans again if youwant to adjust the grinder to the nextsetting.


Push the slide control one setting tothe left (for finer grinding) or onesetting to the right (for coarsergrinding).

Close the front.

Make one cup of coffee.

Adjust the grinder setting again.

The altered grinder setting will not beused until after the second coffee hasbeen dispensed.


36

Displaying and changing theparameters of a drink Touch .

Select the drink you want and touchOK.

The current settings for the amount ofcoffee, brewing temperature and pre-brewing will be displayed for this drink.

Amount of coffee

The coffee machine can grind and brew6-14 g of coffee beans per cup. Thegreater the quantity, the stronger thecoffee.

There are various ways to tell whetherthe amount of coffee is set correctly.

The amount of coffee is too low if:

– Espresso or coffee flows into the cuptoo quickly.

– The crema is very pale and uneven.

– The espresso or coffee lacks body.

Increase the amount of coffee so thatmore ground coffee is brewed.

The amount of coffee is too high if:

– Espresso or coffee only trickles intothe cup.

– The crema is dark brown.

– The espresso or coffee tastes bitter.

Decrease the amount of coffee so thatless ground coffee is brewed.

Select Amount of coffee and thentouch OK.

Use the arrow sensors to changethe amount. Touch OK.


Tip: If the coffee is too strong for you orit tastes bitter, try a different type ofbean.


37

Brewing temperature

The ideal brewing temperature willdepend on

– the type of coffee being used,

– whether an espresso or a coffee isbeing made, and

– the altitude of the region.

If the coffee machine is located at morethan 2000 metres above sea level, thebrewing temperature needs to be setlower due to the change in pressure.This is because the boiling point forwater at a high altitude above sea levelis lower than the boiling point for waterat sea level.

Tip: Not all types of coffee canwithstand high temperatures. Certaintypes are too delicate - the crema ontop would not be as good and the tastewould be impaired.

The coffee machine has five brewingtemperatures.

Select Brew temperature and thentouch OK.

Select the required temperature andtouch OK.


Pre-brewing the coffee

When the pre-brewing function isswitched on, the freshly ground coffeeis first moistened with a little hot water.Then the remaining water is forcedthrough the moistened coffee at highpressure. This helps release the flavourof the coffee.

You can set pre-brewing for a short orlong length of time, or deselect " Pre-brewing " altogether. The machine is supplied with the "Pre-brewing" function switched off.

Touch the arrow sensors untilPre-brewing is highlighted. Touch OK.

The pre-brewing option which iscurrently selected will be marked with atick .

Touch the arrow sensors untilthe setting you want is highlighted.Touch OK.


Portion size

38

The flavour of the coffee produceddepends not just on the type of coffeeused, but also on the amount of waterused. You can programme the amountof water to suit the size of your cupsand the type of coffee you are using.

For coffee drinks that use milk, inaddition to the amount of espresso orcoffee, you can also set the amount ofmilk or milk froth to be dispensed. Youcan also set the portion sizes for hotmilk and milk froth separately.

Each type of drink has a maximumportion size that can be programmedinto the machine. The coffee machinehalts preparation of the coffee once thisportion size has been reached. Themaximum possible portion size for thistype of drink is then saved in themachine.

The changed portion size is alwayssaved in the current Profile. The nameof the current profile appears in thetop left-hand side of the display.

There are two ways to startprogramming the portion amount:

– Either by touching the drink sensorwhen you are making a coffee, or

– By selecting Portion size in theParameters menu.

Tip: You can cancel the portion sizeprogramming as long as Stop is visiblein the display.

If the water container becomes emptywhilst making a drink, the machine willstop programming the portion size.The portion size will not be saved.

Changing the portion sizewhile making a drinkYou can change and save the portionsize for Espresso , Coffee ,Cappuccino and Latte macchiato while making these drinks.


Touch the sensor for the drink youwant until Change appears in thedisplay.

The desired drink will be made andSave will appear in the display.

When the cup is filled up to the levelyou want, touch OK.

If you want to change the portion sizefor coffee specialities made with milk(e.g. Cappuccino), the ingredients(components) which make up the drinkwill be saved one after the other whilethe drink is being made.

When the quantity for each ingredientreaches the level you want,touch OK.

The programmed mix of ingredientsand portion sizes will now be dispensedevery time that particular drink isselected.

Portion size

39

Changing the portion sizes inthe Parameters menu

You can only change the portion sizesfor Long coffee, Caffè Latte, hotmilk and milk froth via the"Parameters" menu.

Place a suitable container underneaththe central spout.

Touch .

Select the drink you want.

Select Portion size and touch OK.

Now proceed as for changing theportion size while making a drink.

Changing the portion size fordifferent profilesYou can set the portion size forindividual drinks for each profile.

Touch .

Select the profile you want.

The name of the current profile isshown in the top left of the display.

You can now change the portion size ofthe individual drinks as describedpreviously.

Profiles

40

In addition to the Miele profile, you canenter individual profiles to cater fordifferent tastes and preferences.

In each profile you can adjust thesettings for individual drinks (portionsize, amount of coffee, brewingtemperature and pre-brewing).


Opening a profile Touch .

You can now create a profile.

If you have allocated a profile inaddition to the Miele profile, you havethe following options:

– Select profile from the profiles whichare already allocated.

– Change name if you want to alterthe name of a profile.

– Delete profile if you want to delete aprofile.

– Change profile to programme thecoffee machine so that it changesback to the Miele standard profileautomatically after each drink isdispensed or so that it retains themost recently selected profile.

Tip: Touch or to return to the mainmenu.

Creating a profile

Select Create profile with the arrowsensors and touch OK.

Letters will appear in the display thatyou can select with the arrow sensors.You can use the arrow sensors to selectfrom numbers, upper case and lowercase letters.

Touch the arrow sensors toselect the first character and thentouch OK.

The character you have chosen willappear in the top line of the display.

Repeat the process until the namerequired appears in the top line of thedisplay.

Tip: If you make a mistake you candelete the last character with the sensor.

When you have finished entering aname and want to save it,

use the arrow sensors tohighlight the tick and touch OK.

If you do not want to save your entry:

touch and hold until all charactershave been deleted and the previousmenu appears in the display.

The last created profile is selected asthe current profile.

Profiles

41

Selecting a profile

This selection is only possible if aprofile has been allocated in additionto the Miele standard profile.

Touch the arrow sensors untilSelect profile is highlighted. Touch OK.

Select the required profile with thearrow sensors and touch OK.


Changing the name


Touch the arrow sensors untilChange name is highlighted.Touch OK.

Now proceed as described in"Creating a profile":

– Select to delete a character,

– To enter new characters, select therelevant character and confirm OK.

– Save the new name by selecting inthe display and touching OK.

Deleting a profile


Touch the arrow sensors untilDelete profile is highlighted andtouch OK.

Use the arrow sensors to select theprofile you want to delete.

Touch OK.

A tick will appear beside the profileand after a short while the profile will bedeleted.

Profiles

42

Changing a profile

You can programme the coffee machineso that it changes back to the Mieleprofile automatically after each drinkhas been dispensed, so that the Mieleprofile is always active when themachine is switched on or so that itretains the most recently selectedprofile.

Select Change profile and then touchOK.

You now have the following options:

– Manually: The currently selectedprofile will remain active until youselect another profile.

– After each use: The machine willchange back to the Miele profileautomatically after a drink isdispensed.

– When switched on: Each time themachine is switched on it willautomatically select the Miele profileregardless of which profile wasselected before the machine was lastswitched off.

Select the required option and touchOK.

Settings

43

Opening the Settings menu Touch .

You can now check or make alterationsto settings.

Options which are currently selectedwill have a tick next to them.

Touch if you want to access theprevious menu. Touch to return to Select drink.

Tip: If you have switched on the time ofday display or selected Night dimming,you can alter settings without switchingthe coffee machine on by touching .

Changing and saving settings Touch .

Select the setting you wish to changewith the arrow sensors andtouch OK.

Use the arrow sensors tohighlight the required option.Then touch OK.


Settings

44

Possible setting optionsThe factory default for each option has a * next to it.

Option Available settings

Language deutsch* English and other languages

Country

Time Show

– Off* / On / Night dimming

Clock format

– 12 h / 24 h*

Set

Date Set

Timer Timer 1

– Set : Switch on at / Switch off after (0:30)* / Switch off at

– Days of the weekDays of the week: Monday / Tuesday /Wednesday / Thursday / Friday / Saturday / Sunday

– Activate : Switch on at (Yes / No*) / Switch off at (Yes /No*)

Timer 2

– Set : Switch on at / Switch off at

– Days of the week: Monday / Tuesday / Wednesday /Thursday / Friday / Saturday / Sunday

– Activate : Switch on at (Yes / No*) / Switch off at (Yes /No*)

Eco mode On* / Off

Lighting Brightness

Switch off after

Settings

45

Option Available settings

Info Number of drinks

– Total no. of portions / Espresso / Coffee / Long coffee /Cappuccino / Latte macchiato / Caffè latte / Milk froth /Hot milk / Hot water

No. of uses until appliance needs descaling:

No.of uses until brew unit needs degreasing:

System lock On / Off*

Water hardness Soft

Medium

Hard*

Very hard

Display brightness Set the brightness

Volume Buzzer tones

Keypad tone

Showroom programme Demo mode (On / Off*)

Factory default Do not reset

Reset

Settings

46

LanguageYou can select the language (andcountry variant of that language) for alldisplay text.

Tip: If you select the wrong languageby mistake, you can find the"Language" option by following the flagsymbol .

TimeYou can set the time display, the clockformat and the time.

Display (Time of day display)

You can choose from the followingoptions:

– On: The time and the date will showin the display all the time, even whenthe coffee machine is switched off.

– Off: The time and the date will notshow in the display when the coffeemachine is switched off.

– Night dimming: The time and the dateare displayed from 5:00 to 23:00.

The coffee machine will use moreenergy depending on the option youchoose for the display. Informationabout this will appear in the display.

Clock format

The options are:

– 24-hour display (24 h)

– 12-hour display (12 h)

Setting the time

Use the arrow sensors to set thehours and minutes.

DateUse the arrow sensors to set theyear, month and day.

TimerThere are two timers with the followingfunctions:

The coffee machine

– switches on at a particular time, e.g.in the morning for breakfast (Switch onat),

– switches off at a particular time(Switch off at),

– switches off after a particular lengthof time if none of the sensors hasbeen touched or a drink has not beenmade (Switch off after; Timer 1 only).

You can allocate the timer functions toindividual days of the week.

For Switch on at and Switch off at, thetimer must be activated and at leastone day of the week allocated.

Settings

47

Selecting a timer

The options are:

– Timer 1: Switch on at, Switch off at,Switch off after

– Timer 2: Switch on at, Switch off at

Switch on at

Please note that the coffee machinewill not switch on at the required timeif you have activated the system lock.


If the coffee machine has switcheditself on three times using the Switch onat timer function and no drinks havebeen dispensed, the machine will notswitch itself on again automatically.This prevents the coffee machine fromswitching itself on unnecessarily, forexample, whilst you are away onholiday.The programmed times will, however,remain in memory and will bereactivated after manually switching themachine on again.

Switch off at


In the event of a longer absence theprogrammed times will remain inmemory and will be reactivated aftermanually switching the machine onagain (see "Switch on at").

Switch off after

The Switch off after timer function isonly available in Timer 1.

If none of the sensors have beentouched or a drink has not been made,the coffee machine will switch itself offafter 30 minutes to save energy.

You can change this pre-setting usingthe arrow sensors to a time ofbetween 15 minutes and 9 hours.

Allocating days of the week

Select the day of the week you want.The selected day of the week will bemarked with a .

When all days of the week required aremarked,

touch the arrow sensor repeatedlyuntil Accept is highlighted. Touch theOK sensor.

Settings

48

Activating and deactivating the timer

If you have selected On or Night dimmingfor the time display: when Switch on at is activated for thetimer, the symbol and the desiredswitching on time will appear in thedisplay 23:59 hours before.

If the system lock is activated, theSwitch on at option for the timer cannotbe selected.

Select the required timer function. Thetimer function selected will be markedby a .

Touch the arrow sensor repeatedlyuntil Accept is highlighted. Touch theOK sensor.

Eco modeEco mode is an energy-saving mode.The steam system does not heat upuntil a coffee drink or steam for hotmilk / milk froth is requested.

If Eco mode is switched off, milk frothand hot milk, as well as coffee andespresso, can be made one afteranother. The steam system remainsheated up and much more energy isused.

A message regarding the altered energyconsumption will appear in the display.

Settings

49

LightingYou have the following options:

– You can set the brightness when themachine is switched on.

– You can set the brightness when themachine is switched off.

– You can specify when the lightingshould switch off (Lighting: Switch offafter).

Set the brightness

First select:

– Appliance switched on

– Appliance switched off

Change the brightness using the arrowsensors .

To switch off the lighting,

touch the arrow sensor until noneof the segments is filled and Switchedoff appears.

Setting the time the lighting switchesoff (Switch off after)

You can adjust the length of time thatthe coffee machine remains lit up afterswitching off.Use the arrow sensors to set thehours and minutes.

When the coffee machine is switchedon it remains lit up for 10 minutes afterthe last action. This time cannot beadjusted.

Info (display information)In the Info option, the number ofportions made for each individual drinkcan be displayed.

You can also see whether more than50 portions can be dispensed beforethe machine needs to be descaled orbefore the brew unit needs to bedegreased (No. of uses until).

To return to the previous display,

touch OK.

Settings

50

Locking the coffee machine(System lock )You can lock the coffee machine toprevent it being used without yourknowledge, by children, for example.

Activating and deactivating thesystem lock

When the system lock is activated, theSwitch on at option for the timer isdeactivated. The coffee machine willnot switch on at the time set.

Overriding the system lock

While the message Press the OK buttonfor 6 seconds to unlock is in the display,

touch the OK sensor for 6 seconds.

As soon as you switch the coffeemachine off, the system lock will beactivated again and the coffeemachine is locked.

Water hardnessPlease see "Using for the first time" forinformation about water hardness.

Display brightnessChange the display brightness usingthe arrow sensors .

VolumeYou can set the volume of buzzer andkeypad tones using the arrowsensors .

To switch the tones off:

touch arrow sensor until none ofthe segments is filled and Switched offappears.

Settings

51

Factory defaultYou can reset the settings back to theones which were set when the coffeemachine was delivered - the factorydefault settings.

The number of drinks and the appliancestatus (No. of uses until descaling, ...degreasing the brew unit) cannot bereset.

Please refer to the "Possible settingoptions" chart for the factory settings.

The following settings will not bereset:

– Language

– Time

– Date

Demo mode (Showroomprogramme)

Do not activate this setting fordomestic use!

The coffee machine can bedemonstrated in the showroom usingthe Showroom programme. In this modethe machine lights up but drinks cannotbe made or actions taken.

If you activate the Demo mode, youcannot switch the appliance off withthe On/Off sensor .

Cleaning and care

52

Clean the coffee machine regularly to avoid a build-up of bacteria.

Quick guide

Recommended frequency What do I have to clean / maintain?

Every day(at the end of the day)

the milk flask and lid

the water container

the waste container

the drip tray and the drip tray cover

Once a week (or more often if badly soiled)

the central spout

the sensor cover

clean the milk valve with the cleaning brush

the interior

the small drip catcher inside the front of the machine

the brew unit

the front of the machine (especially straight after descaling)

Once a month lubricate the cap on the central spout connector

the coffee bean container

When prompted to the milk pipework (using the cleaning agent for milkpipework)

the brew unit (degrease with the cleaning tablets)

descale the machine

Cleaning and care

53

Cleaning by hand or in thedishwasherThe following must be cleaned by handonly:

– Central spout cover

– Brew unit

– Coffee bean container and the coffeebean container lid

– Maintenance panel

Some components of the coffeemachine are dishwasher safe.However, cleaning these in thedishwasher frequently can causethem to become discoloured due toregular contact with food residues(e.g. tomatoes) in the dishwasher.The surface can also becomedamaged.

The following components aredishwasher safe:

– Drip tray and lid

– Drip tray and grid

– Drip tray cover

– Water container

– Waste container

– Central spout (without stainless steelcover)

– Milk flask and lid

– Drip catcher

Danger of burning and scaldingon hot components or by hot liquids.Always allow the coffee machine tocool down before cleaning it.Caution: Water in the drip tray canbe very hot

Do not use a steam cleaner to cleanthis machine. Steam could reach theelectrical components and cause ashort circuit.

It is important to clean the machineregularly as the used coffee groundswill soon go mouldy. Sour milk depositscan block the milk pipework.

The central spout connector cap islubricated with silicone grease.Take care not to get this on yourclothes when removing or replacingthe containers or other components.

Cleaning and care

54

All surfaces are susceptible toscratching. Scratches on glasssurfaces could even cause abreakage. Contact with unsuitablecleaning agents can discolour thesurfaces. Wipe up any spillages orsplashes of descaling agentimmediately.

To avoid damaging the surfaces ofyour coffee machine, do not use:

– cleaning agents containing soda,ammonia, acids or chlorides,

– solvent-based cleaning agents,

– cleaning agents containing descalingagents,

– stainless steel cleaning agents,

– dishwasher cleaner,

– glass cleaning agents,

– oven cleaner,

– abrasive cleaning agents, e.g.powder cleaners and cream cleaners,

– hard, abrasive sponges, e.g. potscourers, brushes or sponges whichhave been previously used withabrasive cleaning agents,

– melamine eraser blocks,

– sharp metal tools.

Cleaning and care

55

Drip tray

Danger of burning.If the rinsing process has justfinished, wait a while beforeremoving the drip tray as the waterused for rinsing will run out of thecoffee spouts.

Clean the drip tray every day toprevent unpleasant odours andmildew.

A prompt will appear in the displaywhen the drip tray is full and needs tobe emptied. Remove the tray andempty it at the latest when this promptappears.

Open the machine front and carefullyremove the drip tray from themachine.

The grid in the drip tray prevents thewater from spilling out of the traywhen it is being carried.

Clean the drip tray and the grid withhot water and a little washing-upliquid, or in the dishwasher and drywith a cloth.

Clean the metal contact discs andthe space between them carefully.Dry everything thoroughly.

The discs will not be able to detectthat the drip tray is full if they aredamp or dirty.Check this area once a week, ifnecessary.

Clean the area underneath the driptray.

Push the drip tray back into thecoffee machine.

Make sure the drip tray has beenpushed right into the machine as faras it will go.

Cleaning and care

56

Drip tray cover Remove the drip tray cover.

The drip tray cover can be cleaned inthe dishwasher, or by hand using hotwater and a little washing-up liquid.

Dry the drip tray thoroughly.

Refit the cover on the drip traymaking sure it sits flush at the front.

Water containerChange the water every day to preventa build-up of bacteria.

Make sure that the valve, theunderside of the water container andthe surface the water container sitson are clean. Otherwise the watercontainer will not sit correctly.

The water container can be cleanedin the dishwasher, or by hand usinghot water and a little washing-upliquid. After cleaning, dry the watercontainer.

Carefully clean and dry the surfacethe water container sits on, takingspecial care to clean the recessesproperly.

Cleaning and care

57

Waste containerAfter a certain period of time a reminderto empty the waste container willappear in the display. The wastecontainer must be cleaned when thismessage appearsHowever, it is better to clean the wastecontainer every day to prevent coffeegrounds from turning mouldy.

There will probably also be some waterin the waste container left over from therinsing process.

Clean the waste container with hotwater and a little washing -up liquidor in the dishwasher, and dry with asoft cloth.

Also thoroughly clean the nowaccessible area in the machine wherethe waste container sits.

Central spoutWith the exception of the stainless steelcover, all parts of the central spoutshould be cleaned in the dishwasher atleast once a week. This will removecoffee deposits effectively.

Clean the stainless steel spout cover byhand only using hot water and a littlewashing-up liquid.

Push the central spout right down and remove the cover by pulling it offtowards you .

Press catch upwards, grasp thedispensing unit by the handle andpull this forwards and off .

Cleaning and care

58

Hold the unit at the sides and pull itforwards to release it.

Turn upper connection piece andpull it upwards to remove it. Removelower connecting piece in thesame way.

Pull off dispensers .

The Y-piece connector must not beremoved.

Clean all parts thoroughly.

Tip: Place the dispensing unit verticallyin the upper basket of the dishwasher.Place the connecting pieces and thedispensers in the cutlery tray.

Clean the surfaces of the centralspout with a damp cloth.

Cleaning and care

59

Reassemble the dispensing unit inthe reverse order. Make sure thatupper connecting piece clicks intoposition. Press the dispensers firmlyinto position on the dispensingunit.

Replace the dispensing unit in thecentral spout.

Then refit the cover.

Maintenance of the milk valveThe milk valve should be cleaned oncea week to ensure good quality milkfroth.

Touch .

Use the arrow sensor to selectMaintenance. Touch OK.

Select Condition milk valve and thentouch OK.

The central spout will move into themaintenance position.

Important. You must remove thecleaning brush before confirmingQuit maintenance position with OK.Otherwise the coffee machine will bedamaged.

Insert the brush in the milk valve andmove it back and forth.

Touch OK.

The milk valve will move into the correctposition and the milk pipework will berinsed through.

Cleaning and care

60

Milk flask and lid

Soiling can cause a fault in themachine.It is important to keep the neck andflange of the flask clean (whilst fillingit and carrying it).

Clean the milk flask holder on thecoffee machine with a damp cloth.

Clean the glass milk flask in thedishwasher or by hand using hotwater and a little washing-up liquid.Dry the milk flask thoroughly.

Before placing the lid of the milk flaskin the dishwasher:

Rinse the milk pipework in the lidunder running water.

If when doing this, no water runs out ofthe milk pipework ,

dismantle the milk flask lid and cleanit with the cleaning brush supplied.

Dismantling the milk flask lid andcleaning it with the cleaning brush

Milk fat deposits can collect in the milkflask lid. These will cause the milk tosputter when milk froth is being made.

Pull the milk suction tube out ofthe milk flask lid. Ensure that you alsoremove seal when doing this.

Clean both under hot, running water.Insert the cleaning brush suppliedinto the stainless steel tube andmove it back and forth until all milkdeposits have been removed.

Cleaning and care

61

Also use the cleaning brush to cleanthe milk pipework in the lid fromabove and below.

To reassemble the lid:

First insert the seal in the lid.

Make sure you do not fit the slantedend of the milk intake tube into theseal. This would damage it.

Fit the milk intake tube into the seal.

Coffee bean container Take the coffee bean container out of

the machine and then push the lidback to remove it.

Clean the coffee bean container andthe lid by hand using hot water and alittle washing-up liquid and then drythem both thoroughly.

Replace the lid and push thecontainer back into place in themachine.

Cleaning and care

62

Interior and machine front First take out all removable parts and

then clean the interior and themachine front with a mild solution ofhot water and washing-up liquid.

Tip: Use your vacuum cleaner toremove dry ground coffee residues.

A small drip catcher is located insidethe front of the machine at the bottom.

Remove the drip catcher and clean itin the dishwasher or by hand usinghot water and a little washing-upliquid.

After cleaning, remember to replacethe drip catcher in the coffeemachine.

Central spout connectorThe part which connects the brew unitand the central spout is located on theinside of the machine front.

Clean this connection regularly with adamp cloth, taking care not to wipethe grease off the cap.

Lubricate the cap at least once amonth with the silicone greasesupplied.

Cleaning and care

63

Brew unit

Removing and cleaning the brew unitby hand

Clean the brew unit by hand onlyusing warm water. Do not usewashing-up liquid. The moving partsof the brew unit are lubricated.Washing-up liquid will damage thebrew unit.

The brew unit can be removed forcleaning.It should be cleaned once a week.


Remove the water container, wastecontainer and the coffee chute cover.

Press the button under the handle ofthe brew unit and, whilst doing so,turn the handle clockwise .

Press the catch in front of the brewunit downwards, and pull the brewunit out carefully.

Carefully pull the brew unit out of thecoffee machine.

If you cannot remove the brew unit orcan only do so with difficulty, the brewunit is not in the correct position (See"Problem solving guide").

After taking the brew unit out of themachine do not change the positionof the brew unit handle, as thiswould cause the brew unit to be outof alignment and you will not be ableto push it back into the coffeemachine.

Clean the brew unit by hand underwarm running water without usingwashing-up liquid.

Wipe any remaining coffee off thetwo filters. One filter is located in thefunnel and the other to the left of thefunnel.

Dry the funnel to prevent groundcoffee sticking to it the next time acoffee is prepared.

Clean the inside of the coffeemachine. Use your vacuum cleaner toremove dry coffee grounds.

Cleaning and care

64

To replace the brew unit:

Proceed in the reverse order: pushthe brew unit back into the coffeemachine, making sure it goes instraight.

Press the button under the handle ofthe brew unit and, whilst doing so,turn the handle anti-clockwise .

Close the front.

Maintenance programmesThe coffee machine has the followingmaintenance programmes:

– Rinse the machine

– Rinse the milk pipework

– Clean the milk pipework

– Degrease the brew unit

– Descale the machine

Carry out the relevant maintenanceprogramme when the prompt to do soappears in the display. Please see thefollowing pages for more information.

Opening the "Maintenance" menu

Touch .

Select with the arrowsensors Maintenance. Touch OK.

You can now select a maintenanceprogramme.

Cleaning and care

65

Rinsing the machineYou can rinse the milk pipeworkmanually.

After a coffee has been dispensed, themachine is rinsed before it switchesoff. This removes any residual coffee.

Touch .

Touch the arrow sensor untilMaintenance is highlighted. Touch OK.

Touch the arrow sensors until Rinseappliance is highlighted. Touch OK.

The pipework will now be rinsedthrough.

Rinsing the milk pipeworkMilk residue can clog up the milkpipework. If you have made a drink withmilk, the coffee machine will rinse themilk pipework automatically after a fewminutes.

You can also rinse the milk pipeworkmanually.

Tip: Place a suitable containerunderneath the central spout.

Touch .

Touch the arrow sensor untilMaintenance is highlighed. Touch OK.

Select Rinse milk pipework and thentouch OK.

The pipework will now be rinsedthrough. The water used for rinsingprocess will run out of the centralspout.

Cleaning and care

66

Cleaning the milk pipeworkThe milk pipework must be cleaned atleast once a week. The coffee machine will prompt you atthe correct time. Clean the milk pipeworkin days will appear in the display threedays before the coffee machine is dueto be cleaned. Each time the coffeemachine is switched on the number ofdays until the milk pipework needs tobe cleaned will appear in the display.

Touch OK to confirm the message.

When the number of days remainingreaches 0, Clean milk pipework willappear in the display. You cannot makedrinks with milk until cleaning has beencarried out.

You can now only dispense espresso,coffee, long coffee and hot water. Youwill only be able to make drinks withmilk once the milk pipework has beencleaned.


Carrying out the milk pipeworkcleaning process

The cleaning process cannot becancelled once it has started. Theprocess has to be completedthrough to the end.

The Clean milk pipework maintenanceprogramme lasts forapprox. 13 minutes.

Touch .

Touch the arrow until Maintenanceis highlighted. Touch OK.

Touch the arrow sensors until Cleanmilk pipework is highlighted. Touch OK.

The process will start and variousmessages will appear in the display.


When Fill the water container with cleaningagent and lukewarm water up to the symbol and place in the appliance appearsin the display, proceed as follows.

Cleaning and care

67

Make up the cleaning solution

We recommend using Miele milkpipework cleaning agent for cleaningthe milk pipework.This has been specially developed foruse with Miele coffee machines andprevents subsequent damage.

The milk pipework cleaning agent isavailable to order from Miele or via theinternet at www.miele-shop.com.

Add one sachet of the milk pipeworkcleaning agent to the water container.

Fill the water container to the mark with lukewarm water and stirthe solution.

Follow the instructions for the mixingratio carefully. It is important that youdo not fill the water container withtoo little water, otherwise cleaningwill be incomplete.

Replace the water container in thecoffee machine and close the front.


When prompted to by the display,

remove the water container and rinseit carefully with clean water. Makesure that no cleaning agent is left in

the water container. Fill the watercontainer with fresh tap water andreplace it in the machine.

The cleaning process is finished whenProg. finished appears in the display.

Cleaning and care

68

Degreasing the brew unitDepending on the natural oil content ofthe coffee used, the brew unit canbecome blocked quite quickly. It mustbe degreased regularly in order toensure aromatic coffee and trouble-freeoperation of the coffee machine.

We recommend using Miele cleaningtablets to clean the brew unit. Thesehave been specially developed for usewith Miele coffee machines and preventsubsequent damage.Miele cleaning tablets can be orderedfrom Miele or www.miele-shop.com.

The maintenance programme fordegreasing the brew unit lasts forapprox. 11 minutes.

After 200 portions have beendispensed, Degrease the brew unit willappear in the display.

Touch OK.

This message will not go out until thebrew unit has been degreased.

Carrying out the degreasing the brewunit process

Switch the coffee machine on withthe On/Off sensor .

Touch .

Select Maintenance with the arrowsensor and touch OK.

Select Degrease the brew unit and thentouch OK.

The cleaning process cannot becancelled once it has started. Theprocess has to be carried through tothe end.

Touch OK.


When Place a cleaning tablet in the groundcoffee chute and close the chute appearsin the display:

Remove the coffee chute cover andopen the lid of the coffee chute.

Place a cleaning tablet into the coffeechute.

Close the lid, replace the coffeechute cover and close the machinefront.

Follow the further instructions givenin the display.

When Prog. finished appears in thedisplay

touch OK.

The brew unit has now been cleaned.

Descaling the machine

69

Warning. When descaling themachine, cover delicate surfacesand natural flooring to preventdamage from splashes of descalingsolution.Ensure that any splashes ofdescaling solution are wiped upimmediately.

Limescale builds up in the coffeemachine through use. How often themachine needs to be descaled willdepend on the water hardness level inyour area. It should be descaledregularly to ensure that it functionscorrectly.

The machine will guide you through thedescaling process. Various messageswill appear in the display, e.g. you willbe prompted to empty the drip tray orfill the water container.

Descaling must be carried out. Theprocess takes approx. 20 minutes.

The coffee machine prompts you whenit needs to be descaled. No. of uses untilappliance needs descaling: 50 will appearin the display. The remaining number ofdrinks that can be made beforedescaling will now show in the displayafter each drink is made.


When the number of remaining portionsreaches 0, the coffee machine will lockout.

You can switch off the coffee machine ifyou do not want to descale it at thistime. However, you will be not be ableto make any more drinks until descalinghas been carried out.


70

Descaling after promptappears in the displayDescale the appliance appears in thedisplay.

The descaling process cannot becancelled once it has started. Theprocess has to be completed throughto the end.

Touch OK.

The process will start.


When Fill water container with descalingagent and lukewarm water up to the symbol and place in the appliance appearsin the display, proceed as follows.

Make up the descaling solution

We recommend using Miele descalingtablets for optimum results.These have been specially developedfor use with Miele coffee machines andprevent subsequent damage.

Other descaling agents, whichcontain other acids besides citricacid and/or other undesirablesubstances, such as chlorides forexample, could damage the coffeemachine. Moreover, the descalingeffect required could not beguaranteed if the descaling solutionwas not of the appropriateconcentration.

Miele descaling tablets are available toorder from Miele or via the internet atwww.miele-shop.com.


71

You will need 2 descaling tablets.

Fill the water container to the symbol with lukewarm water.

Drop 2 descaling tablets in the water.

Follow the instructions for the mixingratio carefully. It is important that youdo not fill the water container withtoo much or too little water.Otherwise the descaling process willbe cancelled prematurely.

Carrying out descaling

Replace the water container in thecoffee machine and close the front.

Follow the further instructions givenin the display.

When Rinse the water container and fill withfresh tap water up to the symbolappears in the display:

Carefully rinse the water containerwith clean water. Ensure that nodescaling solution residue remains inthe water container. Fill the watercontainer to the symbol with fresh,clean tap water.

The cleaning process is finished whenrinsing has finished.

Touch OK.

The coffee machine has now beendescaled and can be used for makingdrinks again.

The water container and the drip trayshould be cleaned carefully afterdescaling in order to remove any tracesof descaling agent.

To protect the machine andsurrounding surfaces from damage,make sure you wipe up any spillagesor splashes of descaling agentimmediately.


72

Descaling when not promptedby a message Touch .

Select Maintenance and touch OK.

Select Descale the appliance.

The descaling process cannot becancelled once it has started. Theprocess has to be completed throughto the end.

Touch OK.

The descaling process will now start.

Problem solving guide

73

Most problems that occur during daily use can be easily corrected. With the helpof the following guide, you will be able to find the causes of problems and rectifythem.

Warning. Do not open the casing of the machine.Repairs and other work by unqualified persons can cause considerable dangerto users.Repairs should only be carried out by a Miele authorised technician.

If you cannot resolve the problem following these instructions please contactMiele (see back cover for contact details).

Messages in the display

Fault messages must be confirmed with "OK", otherwise the message canreappear in the display even though the problem has been remedied.

Follow the instructions which appear in the display to remedy the problem.

If after this, the fault message appears in the display again, contact Miele.

Problem Cause and remedy

F1, F2, F3, F4,F80, F81, F82, F83

There is an internal fault. Switch the coffee machine off with the On/Off

sensor . Wait for approx. 1 hour beforeswitching it back on again.

F74, 77F225, F226F235, F236

There is an internal fault. Switch off the coffee machine with the On/Off

sensor . Wait for approx. 2 minutes beforeswitching the machine back on again.


74


F73 orCheck the brew unit

The brew unit cannot be positioned correctly, or it isdirty and the ground coffee cannot be processed. Check whether you can remove the brew unit (see

"Cleaning and care - Brew unit"). Remove and clean the brew unit (see "Cleaning

and care – Brew unit").

Push the coffee ejector of the brew unit into thecorrect position (see illustration).

Push the waste container and the water containerback in the machine. Do not insert the brew unit.Close the front and switch the machine on withthe On/Off sensor .

This will initialise the brew unit motor and put it backinto the start position. When Insert the brew unit appears in the display,

open the front and replace all the parts back in themachine. Close the front.

If the brew unit cannot be removed: Switch the machine off with the On/Off sensor .

Wait for approx. 2 minutes before switching itback on again.


75


Too much ground coffee There is too much ready ground coffee in the groundcoffee chute.If more than one level spoon of ground coffee isadded to the coffee chute, the brew unit cannotprocess the coffee. The ground coffee will be directedinto the waste container and the fault message willappear in the display. Switch the coffee machine off with the On/Off

sensor . Remove and clean the brew unit (see "Cleaning

and care – Brew unit"). Remove the ground coffee inside the coffee

machine, e.g. with a vacuum cleaner. Use the coffee spoon supplied to add ground

coffee to the ground coffee chute. Add only oneportion of ground coffee to the chute.

Push the water container inuntil it engages

The water container is not in the correct position. Remove the water container and replace it.

This fault message also appears if the water containerwas not correctly filled and replaced for descaling. Fill the water container to the descaling symbol

and restart the descaling process.


76

Unusual performance of the coffee machine


The display remainsdark after the coffeemachine has beenswitched on using theOn/Off sensor .

The On/Off sensor was not touched for longenough. Touch the depression in the middle of the On/Off

sensor for at least 3 seconds.

The plug is not inserted in the socket correctly. Insert the plug into the socket correctly and switch

on.

The mains fuse has tripped due to a problem with thecoffee machine, the electricity supply or anotherappliance. Switch the coffee machine off at the wall socket

and unplug it. Contact a qualified electrician or Miele.

The lighting remains offafter the coffeemachine has beenswitched on.

The lighting has been switched off. Switch the lighting on (see "Settings - Lighting").

The lighting is faulty. Contact Miele.

The coffee machineswitches off suddenly.

The switch-off time programmed using the timer hasbeen reached. If required, you can select a new switch-off time

(see "Settings - Timer").

The plug is not inserted in the socket correctly. Insert the plug into the socket correctly and switch

on.

The coffee machine isswitched on. Thelighting switches offsuddenly.

The machine will switch itself off automatically afterapproximately 10 minutes if it is not being used.

The sensors do notreact to touch.The coffee machinecannot be operated.

There is an internal fault. Open the front of the coffee machine.

The current process currently will be stopped. Disconnect the coffee machine from the power

supply.


77


The coffee machinedoes not switch itselfon, although the Switchon at setting has beenactivated for the timer.

The system lock has been activated. You need to deactivate the system lock (see

"Settings - System lock").

A day of the week has not been selected. Check the timer settings and change these if

necessary (see "Settings - Timer").

The coffee machine was not used after beingswitched on automatically three times in succession(holiday mode). Switch the machine on and dispense a drink.

The display is hard tosee or not able to beread.

The display brightness has been set too low. Change this setting (see "Settings").

After being switched onPush the water container inuntil it engages appears inthe display although thewater container hasbeen filled and inserted.The machine does notrinse.

The coffee machine needs descaling. Switch the machine off with the On/Off sensor .

Wait for approx. 1 hour. Then switch the machine on again. As soon as

Heating-up phase appears in the display, touch and select Descale the appliance.

Descale the coffee machine. You may need torepeat the descaling process.


78


Empty the drip trayappears in the display,even though the driptray has been emptied.

The drip tray is not positioned correctly in themachine. Push the drip tray in as far as it will go.

The sensors on the drip tray are not working properly.The contacts are dirty.

Clean the contacts and dry them thoroughly (see"Cleaning and care - Drip tray").

The machine front willnot close.

The containers are not pushed all the way in. Check the containers.

The hinges are not correctly aligned. Adjust the hinges (see "Installation - Adjusting the

hinges").


79


The machine front isdifficult to open andclose.

The cap on the central spout connector has either notbeen lubricated or is not lubricated sufficiently.

Check the silicone cap for damage. If necessary,replace it with the extra cap supplied.

Lubricate the cap with the silicone greasesupplied.

Lubricate the cap on the central spout connectorregularly once a month.

The coffee machinedoes not rinse itselfwhen turned on.

This is not a fault.If the coffee machine still has an operatingtemperature higher than 60 °C, rinsing will not takeplace.

When rinsing, no wateror noticeably less waterthan usual runs out ofthe central spout.No coffee or noticeablyless coffee than usual isdispensed from thecentral spout. Thedisplay and the noisewhen coffee is beingmade remain the same. There is noticeablymore "coffee water" inthe waste container.

The central spout is not fitted correctly. Check whether the central spout has been

assembled as described (see "Cleaning and care –Central spout").

The cap is no longer securely fitted to the centralspout connector (see "Guide to the machine"). Check the cap on the central spout connector.

Lubricate the cap with the silicone greasesupplied.

The cap on the central spout connector is damagedor missing. Replace the cap with the extra cap supplied. Lubricate the cap with the silicone grease

supplied.


80


The descaling processwas started by mistake.

The descaling process cannot be stopped once the"OK" sensor has been touched.

Descaling must be continued through to completion.This is a safety precaution to make sure the machineis descaled correctly. This is important for thelongevity and functional efficiency of your coffeemachine. Descale the coffee machine (see "Descaling").

Loud noises are heardduring the descalingprogramme.

This is not a fault.These noises occur when water is flushed throughthe machine at a high pressure.

The display lights upbut the coffee machinedoes not heat up andno drinks are made.

The Demo mode for demonstrating the coffeemachine in the showroom has been activated. Deactivate the demo mode (see "Settings – Demo

mode")


81

Unsatisfactory results


The coffee is not hotenough.

The cup has not been pre-heated.

The smaller the cup and the thicker its sides, themore important it is to pre-heat it. Pre-heat the cup, for example, with hot water.

The brewing temperature has been set too low. Set a higher brewing temperature (see "Coffee the

way you like it – Brewing temperature").

The filters in the brew unit are blocked. Remove and clean the brew unit by hand (see

"Cleaning and care – Brew unit"). Degrease the brew unit (see "Cleaning and care –

Brew unit").

The heating-up time isgetting longer, theamount of water beingdispensed is incorrectand the coffee machineis not performingproperly.

The coffee machine needs descaling. Descale the coffee machine (see "Descaling").

Coffee is not beingdispensed from bothspouts evenly. Milk maybe sputtering whenbeing heated up.

Coffee deposits in the central spout are obstructingdispensing. Dismantle the central spout and clean the

components – with the exception of the stainlesssteel cover – in the dishwasher (see "Cleaning andcare – Central spout").The central spout should be cleaned once aweek.

The coffee grindermakes a louder noisethan usual.

The coffee bean container has become empty duringthe grinding process. Fill the container with fresh beans.

There may be stones in amongst the coffee beans. Switch the coffee machine off immediately. Call

Miele.


82


The coffee flows tooquickly into the cup.

The coffee is too coarsely ground. Set the grinder to a finer setting (see "Setting the

coffee grinder").

The coffee trickles tooslowly into the cup.

The coffee is too finely ground. Set the grinder to a coarser setting (see "Setting

the coffee grinder").

The crema on thecoffee or espresso isnot as it should be.

The grinder setting is not correct. Set the grinder to a finer or coarser setting (see

"Setting the coffee grinder").

The brewing temperature is too high for this type ofcoffee. Set a lower brewing temperature (see "Brewing

temperature").

The coffee beans are stale. Add fresh coffee beans to the coffee bean

container.


83

Problems when heating up or frothing milk


The milk sputters whenit is dispensed. Hissingnoises can be heardwhen milk is beingheated up or frothed.Although the milkshould be frothed, onlyhot milk is dispensedfrom the central spout.

The milk temperature is too high. Good milk froth canonly be achieved when cold milk (< 10 °C) is used. Check the temperature in the milk flask.

The milk flask has not been fitted correctly and so airas well as milk is being sucked in. Push the milk flask in until it clicks into position.

The central spout is not fitted correctly. Check whether the central spout has been

assembled correctly.

The milk pipework in the milk flask lid is dirty. Dismantle the milk flask lid and clean it with the

cleaning brush (see "Cleaning and care – Milkflask").

Clean the central spout and the milk valve with thecleaning brush (see "Central spout" and"Maintenance of the milk valve").

The angled connector is blocked and must bereplaced. Replace the angled connector (see "Replacing the

angled connector").

Fill and insert milk flaskappears in the displayeven though the milkflask has been filled andinserted in the machine.

The milk flask lid could be dirty and this hasprevented the sensing function from workingproperly. Clean the milk flask lid and the milk flask

thoroughly. Dismantle the lid and clean it with thecleaning brush supplied (see "Cleaning and care –Milk flask and lid").


84

Replacing the angledconnectorIf instead of being frothed the milk isonly being heated up, check thefollowing first:

– Is the milk in the milk flask cold(< 10 ° C)?

– Have the central spout and the milkflask lid been cleaned carefully?

– Is the central spout correctly fitted?

If after checking the above, milk stillcannot be frothed, replace the angledconnector as follows:

You will need the replacement angledconnector supplied with the coffeemachine.

Do not use a needle or similarimplement. This would damage thecomponents.

Open the maintenance panel on theback of the machine front.

First release air intake tube fromopening . Then pull off angledconnector .

Pull both tubes out of the angledconnector.

Clean air intake tube underrunning water with the cleaning brushsupplied. "Blowing through" can helpto dislodge blockages.

Insert the brush in milk tube . Movethe brush back and forth as far aspossible until all milk deposits havebeen removed.

Take the new angled connector. (Youcan dispose of the old angledconnector with normal householdwaste).


85

Push the tubes onto the angledconnector and fit it in the coffeemachine. Make sure that the cross-piece on the angled connector isfacing downwards.

Re-insert the air intake tube intoopening .

Replace the maintenance panel andclose the front.

After Sales / Guarantee

86

After sales serviceIn the event of a fault which you cannotcorrect yourself, or if the machine isunder guarantee please contact:

– your Miele Dealer

or

– Miele.

Contact details for Miele are given atthe end of this booklet. N.B. A call-outfee will be charged for service visitswhere the problem could have beenresolved as described in theseinstructions.

When contacting your Dealer or Miele,please quote the model and serialnumber of your coffee machine.These are shown on the data plateinside the machine.

GuaranteeFor information on the applianceguarantee specific to your countryplease contact Miele. See back coverfor address.

In the UK, your coffee machine isguaranteed for 2 years from the date ofpurchase. However, you must activateyour cover by calling 0330 160 6640 orregistering online at www.miele.co.uk.

Saving energy

87

If the settings of the following functionsare altered from the factory default,energy consumption will increase:

– Eco mode

– Lighting

– Time of day display

– Timer

Electrical connection

88

All electrical work should be carried outby a suitably qualified and competentperson only, in strict accordance withcurrent national and local safetyregulations (BS 7671 in the UK). Installation, repairs and other work byunqualified persons could bedangerous. The manufacturer cannotbe held liable for unauthorised work.

The voltage and frequency are given onthe data plate located inside themachine. Please ensure these matchthe household mains supply. This datamust correspond in order to avoiddamage to the machine. The fuse ratingis quoted on the plug.

The coffee machine is supplied with amains cable with moulded plug forconnection to a 50 Hz, 220-240 Vmains supply.

The fuse rating must be at least 13 A.

Connection should be made via a fusedplug and suitable switched socketwhich is easily accessible afterinstallation. If the mains socket is notaccessible after the appliance has beenbuilt in, a separator for each terminalmust be present. There must be an all-pole contact gap of at least 3 mm in theswitch (including switch, fuses andrelays according to EN 60335).

Do not connect the machine to aninverter such as those used with anautonomous energy source e.g. solarpower. When switched on, peak loadsin the system can cause the safetyswitch off mechanism to be triggered.This can damage the electronic unit.

The coffee machine must not be usedwith so-called energy saving deviceseither. These reduce the amount ofenergy supplied to the machine causingit to overheat.

Installation

89

Building-in and combination optionsThe machine is designed to be built into a tall unit.

It can also be combined with other Miele built-in appliances. If the coffee machineis to be built in above another appliance, there must be a full-width, closed shelfbetween them (except when it is combined with a suitable Miele built-in plate orfood warming drawer).

Installation

90

Ventilation

Condensate can damage the coffeemachine or the housing unit.The ventilation gaps given must beobserved.Do not cover or block the ventilationgaps.Dust the ventilation gaps regularly.

Steam which is created when water isheated up can condense on the interiorand the inside of the front of the coffeemachine.

When installing the coffee machineensure that there is sufficient ventilationat the rear of the machine to allowsteam and heated air to escape withouthindrance.

The housing unit should be configuredas follows:

– Air intake occurs via the plinth atthe bottom of the machine and theair escapes at the top at the rearof the housing unit.

– A ventilation gap of at least 40 mmdepth must be allowed for behind themachine for air to circulate.

– The ventilation cross-sections in theplinth, housing unit and below theroom ceiling must amount to at least200 cm2 to ensure that air cancirculate without hindrance.

Top ventilation gap

The ventilation gap at the top of themachine can be constructed in differentways:

a directly above the coffee machinewith a ventilation grille (free air flowof at least 200 cm2)

b in between the housing unit and theceiling

c through a suspended ceiling.

Installation

91

Building in the coffee machine

Before installation make sure thatthere is no power supply to themachine. This also applies should itever need to be taken out of itshousing unit.The machine may only be operatedwhen built-in and in an ambienttemperature range between +10 °Cto +38 °C.You will need two Allen keys (size 3and 5) for installing the machine.

To align the machine front with thefurniture front ensure that there is asealing strip provided all the wayaround the building-in niche or aroundthe coffee machine.

If the housing unit niche is not fittedwith a sealing strip you should fit aMiele sealing strip to the machinebefore installing it. This is fitted fromthe back of the machine.

The sealing strip is available to orderfrom Miele.

Tip: It is useful to have somewhere atthe height of the niche to place themachine on. This makes electricalconnection easier.

Using the large allen key, unscrew allfour feet out by 2 mm.

The feet can be unscrewed by up toapprox. 10 mm.

Connect the machine to the electricalsupply.

Take care not to damage theelectrical connection when pushingthe machine into the niche.

Push the coffee machine all the wayinto the niche until you feel aresistance.

Check the height of the coffeemachine to make sure that it is sittingcentrally in the niche and that it islevel. If this is not the case, realignthe machine using the four feet.

Installation

92

Four M5 socket screws are supplied foraligning and securing the machine in itsniche.

Open the front of the machine andloosely fit the screws at either side.

Carefully turn the lower socketscrews to centre the machine in theniche.

Tighten both upper socket screws byhand to secure the machine in theunit. Do not overtighten them.

Adjusting the hingesIf the machine front becomes difficult toopen or close after installation, you canadjust the hinges to realign it (TX 20):

Tighten screw to align the front ofthe machine so that it is flush withthe front of the housing unit.

Tighten screw to align the front ofthe machine horizontally andvertically.

United KingdomMiele Co. Ltd.Fairacres, Marcham RoadAbingdon, Oxon, OX14 1TWCustomer Contact Centre Tel: 0330 160 6600E-mail: [email protected]: www.miele.co.uk

AustraliaMiele Australia Pty. Ltd.ACN 005 635 398ABN 96 005 635 3981 Gilbert Park Drive, Knoxfield, VIC 3180Tel: 1300 464 353Internet: www.miele.com.au

Miele (Shanghai) Trading Ltd.1-3 Floor, No. 82 Shi Men Yi RoadJing' an District200040 Shanghai, PRCTel: +86 21 6157 3500, Fax: +86 21 6157 3511E-mail: [email protected], Internet: www.miele.cn

China

41/F - 4101, Manhattan Place23 Wang Tai RoadKowloon Bay, Hong KongTel: (852) 2610 1331, Fax: (852)2610 1013Email: [email protected]

Miele (Hong Kong) Limited

Miele India Pvt. Ltd.Ground Floor, Copia Corporate SuitesPlot No. 9, JasolaNew Delhi - 110025Tel: 011-46 900 000, Fax: 011-46 900 001E-mail: [email protected], Internet: www.miele.in

India

Miele Ireland Ltd.2024 Bianconi AvenueCitywest Business Campus, Dublin 24Tel: (01) 461 07 10, Fax: (01) 461 07 97E-Mail: [email protected], Internet: www.miele.ie

Ireland

MalaysiaMiele Sdn BhdSuite 12-2, Level 12Menara Sapura Kencana PetroleumSolaris Dutamas No. 1, Jalan Dutamas 150480 Kuala Lumpur, MalaysiaPhone: +603-6209-0288Fax: +603-6205-3768

Miele New Zealand LimitedIRD 98 463 631Level 2, 10 College HillFreemans Bay, Auckland 1011, NZTel: 0800 464 353Internet: www.miele.co.nz

New Zealand

Miele Pte. Ltd.163 Penang Road# 04 - 03 Winsland House IISingapore 238463Tel: +65 6735 1191, Fax: +65 6735 1161E-Mail: [email protected]: www.miele.sg

Singapore

Miele (Pty) Ltd63 Peter Place, Bryanston 2194P.O. Box 69434, Bryanston 2021Tel: (011) 875 9000, Fax: (011) 875 9035E-mail: [email protected]: www.miele.co.za

South Africa

Miele Appliances Ltd.P.O. Box 11 47 82Gold & Diamond Park, Sheikh Zayed RoadBuilding 6 / Offices Nos. 6-214 to 6-220DubaiTel: +971-4-341 84 44Fax: +971-4-341 88 52E-Mail: [email protected]: www.miele.ae

United Arab Emirates

Carl-Miele-Straße 29, 33332 Gütersloh, GermanyManufacturer: Miele & Cie. KG

93

M.-Nr. 10 213 550 / 01en – GB

CVA 6401

operating and installation instructions built-in coffee ... · the cleaning tablets for degreasing...

Documents