239

n Marshalls uses hydraulic pressing in the manufacture of standard natural kerb*,

channel and edging.

n Provides consistent long-term performance as expected from Marshalls with a

functional unit of this type.

n All units are manufactured in accordance with BS EN 1340:2003 Concrete kerb

units – requirements and test methods, together with a range of non-standard

sizes manufactured to the same specification offering greater flexibility in design.

n All straight units are 914mm unless otherwise stated.

n Marshalls recommends the use of appropriate handling equipment in the

installation of these products, and that installers work in accordance with

current health and safety legislation. For further information contact Marshalls

Technical Support on 0870 113344.

*Some radius unit are manufactured in a wet cast production method.

British Standard Products

For easy identification, BS EN 1340:2003 sections are tinted thus

Weights

The approximate number of units per tonne is indicated in each

section thus 20 = 20 units per tonne.

www.marshalls.co.uk/kerb

Sales Office: 0845 3020600Technical Support: 08704 113344 Manufacturing Standards: see page 19

KERB07 Q10 10 Q10 110Q10 112Q10 150

Q10 510 Paving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22Block Paving . . . . . . . . . . . . . . . . . . . . . . page 76Machine Lay . . . . . . . . . . . . . . . . . . . . page 114Water Management . . . . . . . . . page 136

Kerb, Channel & Edging . . . . page 212Traffic Management . . . . . . . . . page 250Walling & Masonry . . . . . . . . . . . page 342

Standard Kerb, Channel and EdgingBS Standard Concrete Kerb, Channel and Edging

‹ Saxon Paving, Priora and Standard Kerb, The Green Building, Thorpe Park, Leeds

240

XXXXXXXXX = 950 face length XXXXXXXXX 914mm face length XXXXXXXXX BS EN 1340

RADIUS

STRAIGHT

150 x 305 HB1 Ref No. RK0100000

Convex (external) Concave (internal)

(97kg) 10

125 x 255 HB2 Ref No. RK0300000(also available in 600mm lengths)

125 x 150 HB3 Ref No. RK0500000

HALF BATTERED RADIUS KERB

Note: ¼ circles can be constructed without cutting from units with a face length of 780mm. Units listed below are 780mm face length unless otherwise stated. For radii greater than 12m straights should be utilised.

(69kg) 14 (42kg) 24

Formula

Half Battered

Radius 0.6 1 2 3 4 5 6 8 10 12†

Type Size Profile No. per 1 2 4 6 8 10 12 16 20 24 Weight 1/4 Circle* kg (approx)

External Rad 150 x 305 HB1 RK0105200 RK0105300 RK0105400 RK0105600 RK0105800 RK0106000 84.9

125 x 255 HB2 RK0305060 RK0305100 RK0305200 RK0305300 RK0305400 RK0305500 RK0305600 RK0305800 RK0306000 RK0306200 62.0

125 x 150 HB3 RK0505300 RK0505400 RK0505500 RK0505600 RK0505800 RK0506000 34

Internal Rad 125 x 255 HB2 RK0307100 RK0307300 RK0307400 RK0307500 RK0307600 RK0307800 RK0308000 RK0308200 62.0

External Rad 125 x 255/150 HB to BN (LH) RK4307400 RK4307600 RK4307800 52.5

Drop Kerb 125 x 255/150 HB to BN (RH) RK4305400 RK4305600 RK4305800 52.5

*Except droppers.†Achieved using a 10m radius kerb. Standard design layout details available through Technical Advisory services.

Half Battered Radius Kerb with reference numbers indicated in bold black are available ex-stock. Half Battered Radius Kerb with reference numbers indicated in light black are manufactured to order. Contact our Sales Office to discuss your requirements.

241

QUADRANTS

DROP KERBS 1:12 GRADIENT 1:9 GRADIENT

ANGLES

TRANSITIONS SIDE OFFLET

125 x 255/178 Left hand Ref No. RK4330010125 x 255/178 Right hand Ref No. RK4330020

125 x 178 Centre Ref No. RK4340000

125 x 255 HB to 45º SP Left hand TL Ref No. RK5070010125 x 255 45º SP to HB Right hand TR Ref No. RK5070020

For use with 125 x 255 HB Ref No. RK5300000125 x 255 HB to BN Left hand Ref No. RK5050010125 x 255 BN to HB Right hand Ref No. RK5050020

305 x 255 QHB Ref No. RK4720000External125 x 255 HBXA Ref No. RK5100000

Internal125 x 255 HBIA Ref No. RK5100100

455 x 255 QHB Ref No. RK4710000

125 x 255/150 Left hand DL1 Ref No. RK4300010125 x 255/150 Right hand DR1 Ref No. RK4300020

DOUBLE DROP KERB 1:24 GRADIENT

125 x 215/178 Left hand Ref No. RK4320030

125 x 215/178 Right hand Ref No. RK4320040

125 x 255/215 HB Left hand Ref No. RK4320010

125 x 255/215 HB Right hand Ref No. RK4320020

(59kg) 17 (59kg) 17(49kg) 20

(69kg) 14 (62kg) 16(69kg) 14

(36kg) 28 (99kg) 10(43kg) 23(36kg) 28

(54kg) 19 (63kg) 16

Bullnosed Kerb with reference numbers indicated in bold black are available ex-stock. Bullnosed Kerb with reference numbers indicated in light black are manufactured to order. Contact our Sales Office to discuss your requirements.

242

RADIUS

STRAIGHT

150 x 305 BN Ref No. RK0150000

Convex (external) Concave (internal)

(100kg) 10

125 x 255 BN Ref No. RK0350000Also available in 600mm length

125 x 150 BN Ref No. RK0550000

(70kg) 14 (42kg) 24

Formula

Bullnosed

Note: ¼ circles can be constructed without cutting from units with a face length of 780mm. Units listed below are 780mm face length unless otherwise stated. For radii greater than 12m straights should be utilised.

Radius 0.6 1 2 3 4 5 6 8 10 12†

Description Size Profile No. per 1 2 4 6 8 10 12 16 20 24 Weight 1/4 Circle* kg approx

Ext Rad Kerb 150 x 305 BN RK0155200 RK0155300 RK0155400 RK0155600 RK0155800 RK0156000 87.2

125 x 255 BN RK0355100 RK0355200 RK0355300 RK0355400 RK0355500 RK0355600 RK0355800 RK0356000 RK0356200 64.0

125 x 150 BN RK0555200 RK0555300 RK0555400 RK0555500 RK0555600 RK0555800 RK0556000 35.5

Int Rad Kerb 125 x 255 BN RK0357600 RK0358000 RK0358200 64.0

125 x 150 BN RK0557300 RK0557400 RK0557500 RK0557600 RK0557800 RK0558000 53.0

XXXXXXXXX BS EN 1340

*Except droppers.†Achieved using a 10m radius kerb. Standard design layout details available through Technical Advisory services.

243

QUADRANTS

DROP KERBS

ANGLES

TRANSITION

125 x 255/150 Left hand Ref No. RK4350010125 x 255/150 Right hand Ref No. RK4350020

125 x 150 Centre Ref No. RK0550000

125 x 255 HB to BN Left hand Ref No. RK4300010125 x 255 BN to HB Right hand Ref No. RK4300020

305 x 255 QBN Ref No. RK4820000Convex (external)125 x 255 BNXA Ref No. RK5150000

Concave (internal)125 x 255 BNIA Ref No. RK5150100

455 x 255 QBN Ref No. RK4810000

(59kg) 17 (42kg) 24

(69kg) 14

(37kg) 27 (99kg) 10(45kg) 22(37kg) 27

†Achieved using a 10m radius kerb. Standard design layout details available through Technical Advisory services. 45° Splayed Kerb with reference numbers indicated in light black are manufactured to order. Contact our Sales Office to discuss your requirements.

244

*Assumes inclusion of trowel width joint.

RADIUS

STRAIGHT

125 x 255 SP Ref No. RK0400000Also available in 600mm length

(64kg) 16

125 x 150 SP Ref No. RK0600000

(36kg) 24

Radius 1 2 3 4 5 6 8 10 12†

(mm)

125 x 255 SP Convex (external) No. per metre* 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.27 1.09

No. per 1/4 circle 2 4 6 8 10 12 16 20 21

Weight (kg) approx 53 53 53 53 53 53 53 53 62.5

Reference No. RK0405100 RK0405200 RK0405300 RK0405400 RK0405500 RK0405600 RK0405800 RK0406000 RK0406200

45° Splayed

DROP KERB

125 x 255/150 Left hand DL2 Ref No. RK4400010125 x 255/150 Right hand DR2 Ref No. RK4400020

(52kg) 19

125 x 150 Centre Ref No. RK0550000

(42kg) 24

TRANSITION

125 x 255 Left hand (HB to 45oSP) TL Ref No. RK5070510125 x 255 Right hand (45oSP to HB) TR Ref No. RK5070520

(69kg) 14

For use with 125 x 255 SP Ref No. RK5320000

(62kg) 16

SIDE OFFLET

245

QUADRANTS

455 x 255 QSP Ref No. RK4910000

(101kg) 24

305 x 255 QSP Ref No. RK4920000

(41kg) 10

45° Splayed

ANGLES

External 125 x 255 SPXA Ref No. RK5200000

(36kg) 28

Internal 125 x 255 SPIA Ref No. RK5200100

(36kg) 28