rotating vacuum seal learning from experiences of slc and nlc t. omori (kek), with many thanks to...
DESCRIPTION
SLC targets In the SLC project, three types of targets were made. They were, in chronological order, (a) Rotation Target (seal: ferromagnetic fluid), (b) Stationary Target, (c) Trolling Target (seal: bellows).TRANSCRIPT
![Page 1: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/1.jpg)
Rotating Vacuum SealLearning from Experiences of SLC and NLC
T. Omori (KEK), with many thanks to Marc-san
28 March 2010, ILC10&LCWS10 at Beijing
![Page 2: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/2.jpg)
SLC and NLC targetsSLC e+ target(s): The only e+ target(s) for a LC in which we have real operation experience.NLC e+ target design study: Very seriously studied (many drawings remains) by SLAC people (they have SLC experience).
Learning from SLC and NLC experiences may help ILC target design.
![Page 3: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/3.jpg)
SLC targetsIn the SLC project, three types of targets were made. They were, in chronological order, (a) Rotation Target (seal: ferromagnetic fluid), (b) Stationary Target, (c) Trolling Target (seal: bellows).
![Page 4: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/4.jpg)
SLC Rotation TargetSpecification (SLAC-PUB-4437) • Diameter : 0.15 m • Rotation Speed : no data • Tangential Speed: no data • Vacuum Seal : ferromagnetic fluid
![Page 5: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/5.jpg)
SLC Rotation Target
What happened (SLAC-PUB-4704) • Capture section failed to achieve high gradient. • This target was suspect (especially the ferromagnetic rotating seal) as a possible cause of contamination in the RF section. • This target had never been operated in actual SLC operations.
Specification (SLAC-PUB-4437) • Diameter : 0.15 m • Rotation Speed : no data • Tangential Speed: no data • Vacuum Seal : ferromagnetic fluid
![Page 6: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/6.jpg)
SLC Trolling TargetSpecification • Tangential Speed: 0.1 m/s • Vacuum Seal : bellowsThe target was used in SLC running in several years.
Mechanism similar toa piston and a crank of a reciprocating engine(piston engine)
Target head swings
![Page 7: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/7.jpg)
SLC Trolling TargetSpecification • Tangential Speed: 0.1 m/s • Vacuum Seal : bellowsThe target was used in SLC running in several years.
Mechanism similar toa piston and a crank of a reciprocating engine(piston engine)
Target head swings
![Page 8: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/8.jpg)
SLC --> NLC• Bellows is very reliable way to seal vacuum.
• No Oil, No liquid of any kind --> No cause of contamination• Very tight seal --> Good Vacuum
![Page 9: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/9.jpg)
SLC --> NLC• Bellows is very reliable way to seal vacuum.
• No Oil, No liquid of any kind --> No cause of contamination• Very tight seal --> Good Vacuum
• But bellows allows only reciprocating motion.
![Page 10: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/10.jpg)
SLC --> NLC• Bellows is very reliable way to seal vacuum.
• No Oil, No liquid of any kind --> No cause of contamination• Very tight seal --> Good Vacuum
• But bellows allows only reciprocating motion.
• NLC target needs much faster tangential speed than SLC.
![Page 11: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/11.jpg)
SLC --> NLC• Bellows is very reliable way to seal vacuum.
• No Oil, No liquid of any kind --> No cause of contamination• Very tight seal --> Good Vacuum
• But bellows allows only reciprocating motion.
• NLC target needs much faster tangential speed than SLC.
• NLC design: rotation seal other than ferromagnetic fluid.
![Page 12: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/12.jpg)
NLC Rotation Target DesignSpecification (SLAC-PUB-6852, SLAC-PUB-7270, ZEROTH-ORDER DESIGN REPORT)
• Diameter : 0.2 m • Rotation Speed : 120 rpm (depends on paper/document) • Tangential Speed : 1.2 m/s • Vacuum Seal : labyrinth seals + diff. pumping + face seal with carbon contacting
![Page 13: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/13.jpg)
NLC Rotation Target DesignSpecification (SLAC-PUB-6852, SLAC-PUB-7270, ZEROTH-ORDER DESIGN REPORT)
• Diameter : 0.2 m • Rotation Speed : 120 rpm (depends on paper/document) • Tangential Speed : 1.2 m/s • Vacuum Seal : labyrinth seals + diff. pumping + face seal with carbon contactingDrawing Exits,
But No Prototype
![Page 14: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/14.jpg)
NLC Rotation Target Design
![Page 15: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/15.jpg)
bearing
NLC Rotation Target Design
![Page 16: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/16.jpg)
bearing
?
NLC Rotation Target Design
![Page 17: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/17.jpg)
bearinglabyrinth seals
?
NLC Rotation Target Design
![Page 18: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/18.jpg)
bearinglabyrinth seals
diff pumping
?
NLC Rotation Target Design
![Page 19: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/19.jpg)
bearinglabyrinth seals
diff pumping
face seal
?
NLC Rotation Target Design
![Page 20: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/20.jpg)
Vacuum Seal Design of NLC Rotation Target
Vacuum
Air
Shaft
pumpingpumping pumping
Vacuum Vessel
![Page 21: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/21.jpg)
Vacuum Seal Design of NLC Rotation Target
Vacuum
Air
Shaft
labyrinth seals
pumpingpumping pumping
Vacuum Vessel
10 – 15 micron
![Page 22: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/22.jpg)
Vacuum Seal Design of NLC Rotation Target
Vacuum
Air
Shaft
labyrinth seals
pumpingface sealcarbon contacting ring& bellows style spring
pumping pumping
Vacuum Vessel
10 – 15 micron
![Page 23: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/23.jpg)
ILC Rotation TargetSpecification • Diameter : 1 m • Rotation Speed : 2000 rpm (depends on paper/document) • Tangential Speed : 100 m/s • Vacuum Seal : ferromagnetic fluid
Our challenge is more difficult than NLC and SLC.
![Page 24: Rotating Vacuum Seal Learning from Experiences of SLC and NLC T. Omori (KEK), with many thanks to Marc-san…](https://reader036.vdocuments.net/reader036/viewer/2022062911/5a4d1c007f8b9ab0599ef0ca/html5/thumbnails/24.jpg)
Summary• We need to develop rotation vacuum seal for ILC. It is challenging issue.• Try ferromagnetic seal again? (failed in SLC)
• Try labyrinth seal? (planed in NLC)• New Idea?