sen plus low voltage switchgear
TRANSCRIPT
REGIONAL OFFICES
NORTH
BRANCH OFFICES
Gurgaon
GE India Industrial Pvt. Ltd.5th Floor, Building No.7A DLF Cyber City, DLF Phase-IIISector 25 A, GurgaonHaryana – 122002Ph: (0124) 4808000Fax: (0124) 4226911 / 4226912
Chandigarh
GE India Industrial Pvt. Ltd.SCO No. 72 & 73, First FloorSector 8/C, Madhya MargChandigarh-160008Ph: (0172) 3982908-10Fax: (0172) 3982905
Jaipur
GE India Industrial Pvt. Ltd.448, 4th Floor, Ganapati PlazaM.I. Road, Jaipur-302001Ph: (0141) 5112802Fax: (0141) 2389012
Lucknow
GE India Industrial Pvt. Ltd.101, Ace Business Center19, Vidhan Sabha MargLucknow-226001Ph: (0522) 3203808, 3012444/666Fax: (0522) 4045909
SOUTH
Bangalore
GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199
Chennai
GE India Industrial Pvt. Ltd.Temple Tower, 6th Floor476, (New No. 672) Anna SalaiNandanamChennai-600035Ph: (044) 45070470-84Fax: (044) 45070474
Coimbatore
GE India Industrial Pvt. Ltd.No.36/6 & 7, 1st FloorAshirwad BuildingD.B.Road, R.S. PuramCoimbatore-641002Ph: (0422) 4393520 / 4393529
WEST
Mumbai
GE India Industrial Pvt. Ltd.361/362, Solitaire Corporate ParkM. Vasanji Road, ChakalaAndheri (E), Mumbai-400093Ph: (022) 40101610Fax: (022) 40101611
EAST
Kolkata
GE India Industrial Pvt. Ltd.Horizon Building, 4th Floor 57, Chowringhee RoadKolkata-700071Ph: (033) 40034056Fax: (033) 40034071
Works:GE India Industrial Pvt. Ltd.Plot No. 42/1 & 45/14Electronic City - Phase IIBangalore-560100Ph: (080) 41113000Fax: (080) 28528469/552
HO:GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199Email: [email protected]
Toll Free No:18001024343
Customer Care:[email protected]
g and General Electric are registered trade marks of General Electric Co. USA©
Ahmedabad
GE India Industrial Pvt. Ltd.405-406, Kirtiman ComplexKinariwala House, Behind CitibankOff C.G. Road, Ahmedabad-380006Ph: (079) 65427385/65427389Fax: (079) 26460637
Pune
GE Money Financial Services LimitedShop No. 405-410, 4th FloorCity Point, Dhole Patil RoadPune-411001Ph: (020) 41266999Fax: (020) 41266109
Cochin
GE India Industrial Pvt. Ltd.Mayur Business Center & MotelChittur Road, Pullepadi JunctionCochin-682035Ph: (0484) 2364139Fax: (0484) 4031400
Hyderabad
GE India Industrial Pvt. Ltd.5-2-45, Hyderbasti, RP RoadNear Gujarati High SchoolSecunderabad-500003Ph: (040) 27543162, 66311264Fax: (040) 66339272
We are committed to continuous development and improvement of our products and the specifications aresubject to change without notice. For product availability and latest prices, please contact GE Sales Team.
For any further information, visit us at http://www.geindustrial.com
SEN Plus Low Voltage Switchgear
Index1 Professional Solution with High Performance
2 System Overview
3 Application
4 Technical Data
5 Feature
9 Structure
14 Dimension and Arrangement
15 Main Components
16 StandardandCertificates
17 Standard Solution
21 Primary Scheme
1
Professional Solution with High PerformanceSEN Plus is a new generation low voltage switchgear based on GEA Plus series, which has significant improvement on system
performance and safety.
SEN Plus has passed full type test according to latest international standards, especially IEC61439-2, IEC/TR3 61641 and IEC60529.
System running continuity and stability are available.
SENPlusprovidessafe,efficientandintelligentsolutionasanintegratedlowvoltagedistributionplatform.
2
System OverviewSENPlushaspassedfulltypetestaccordingtonewIECstandard,delivershighreliability,safety,flexibility,togetherwithintelligence
solution. SEN Plus is the advisable choice for low voltage distribution system.
The System Includes Following Parts:•PowerCenter
Main distribution panel, modular construction, rated current up to 6300A.
•MotorControlCenter
Motorcontrolcentercanprovidefixedtype,plug-inandwithdrawablemodulesfor
feeder and motor starter application. The range of module size varies from 4E to 36E.
•Bus-Coupler,TransitionPanel,CornerPanel
Optimize busbar connection between panels and transformer.
•MotorProtectionRelay
Intelligence motor protection relay can be integrated into motor control center, which
providescomprehensiveprotection,control,fieldbusandEthernetcommunicationfunction.
•KeyComponents
High performance distribution and motor control components, includes air circuit breaker
EntelliGuardTMG,M-Pact,MCCBRecordPlusandmotorstarterSurion.
Reliability
Intelligence
Flexibility
Safety
3
Application• Industrial
Oil & Gas
Automotive
Printing
Pharmaceutical
Chemical
Mechanism
• InfrastructureTransportation
Waste management
Water treatment
Power plant
Airport
•CommercialBuildingOffice
Data center
Warehouses
Supermarket
School
Hospital
4
Technical DataSENPlusSpecificationStandard
Type-tested low voltage switchgear and controlgear
combinations (TTA)IEC61439-2;GB7251.1-2005;IEC60068-2-57;IEC/TR361641
Test Report KEMA,CCC,IPH,Seismictest,Arcprotection
Electrical Data
Rated insulation voltage (Ui) 1000V
Rated voltage (Ue) 400V/690V
Rated frequency 50Hz
Rated impulse withstand voltage 8kV
Main busbar
Main busbar rated current (Ie) 1000-7600A
Short time withstabdard current (Icw) Up to 100kA
Rated peak withstabard current (Ipk) Up to 220kA
Vertical busbar
Vertical busbar rated current (MCC) 850-1900A
Short time withstabdard current (Icw) Up to 100kA
Rated peak withstabard current (Ipk) Up to 176kA
Structure Feature
Height 2200mm
Width 400,500,600,800,1000,1200mm
Depth 600,800,1200mm
Unit module 1E=25mm
Max modules 80E
Protection degree IP30-IP54
Internal separation form Up to form 4b
Enclosure Hot-dip zinc coated steel sheet, epoxy polyester powder
4
5
Feature
ProtectOperatorandEquipmentEffectively
• ArcProtectionDesign
• RELT Protection
• SeparationSheet
SEN Plus secures high safety level during operation. The arc proof design is able to withstand high pressure inside the enclosure during
arc conditions. RELT reduce hazard in short circuit accident. Internal separation sheets protect the operator against contact with
hazardous parts.
SEN Plus passed tests under conditions of arcing due to an internal fault
accordingtoIEC/TR61641:2008-01,satisfiedthefivesafetycriteriainstandard.
The arcs proof design ensures the enclosure withstand high pressure in arc
condition, and protect the operator on site effectively. Arc proof version is
available for Power Centers as well as for Motor Control Centers with module
sizes from 5E up to 36E.
In order to protect service personnel against the hazards of short circuits
whilst working on a power distribution system, SEN Plus can provide Reduced
Energy Let-Through (RELT) protection by using EntelliGuardTM G circuit breaker
according to customers' requirement. This allows the air circuit breaker to be
switched to its lowest short-circuit settings on service(40ms), thus limiting the
hazards concerned.
Internal separation sheet is installed between busbar and equipment
compartment. Finger proof sheets and barriers prevents accidental contacts
with hazardous parts.
1000
0.01
0.1
10000
Amps
Seco
nds
(s)
100000
Trips within40-50 Milliseconds
STDB17 timing optionsfrom 90 to 1000Milliseconds
IselectiveTrips within50-60 Milliseconds
Trips within40 Milliseconds
IRELT
IHI Speed
6
Feature
High ReliabilityWith outstanding derating feature, elaborate critical parts, rigid framework, high protection and internal separation level, SEN Plus
switchgearfulfillshighcustomerexpectations.
• Deratingperformance
• ReliableCriticalParts
• RigidFrameConstruction
The busbar system and breaker connection part of SEN Plus are optimized,
which ensure very limited derating coefficient . The derating performance is
completely testedaccording to IEC IEC61439-2andGB7251.1-2005.High
adaptability and reliability can be achieved.
The critical parts, such as main contact, insulation parts and busbar support,
influence the quality of switchgear directly. The selected critical parts all
passed strict test to ensure satisfying electric and mechanical performance.
The framework is non-welded self-supporting construction, Doors and covers
are made of 2mm sheet steel with powder painted. The maximum degree of
protection is IP54 (according to IEC 60529). The maximum form of internal
separation is up to Form 4b (according to IEC 61439-1).
7
Flexible System
• MaintenanceFreeBusbarSystem
User-friendlydesignofSENPlusallowsflexibleoperationandinstallation.Maintenancefreebusbarsystemcanbeeasilyconnectedon
site.Differenttypesofmotorcontrolandfeedermodulescancombineinsamecolumn.
All jointing points of the busbars are torque set for optimum contact pressure.
Byuseofwasherandspringwashers,theconnectionsaremaintenancefree.
Main busbar separation links are accessible from the front. It is easy to connect
busbarofdifferentpanelatsitebymeansofthefishplate.
• FastandEasyCabling
• FlexibleConfigurationandOperation
The 24 pole auxiliary contact plug is designed to facilitate the easy connection
of the control cabling. Internal separation is up to form 4b. Cable trays for
servicing of all cables are provided as standard.
According to specific needs, all available modules (fixed type, plug-in and
withdrawable) can be combined in the same column. The fully withdrawble unit
design allows fast replacement of the modules. A special mechanism allows
full operation of the module while the door is closed. Withdrawable modules
have connected, test, stand by, disconnected and removed position to satisfy
operation requirement.
8
Intelligence MCC Solution
• ComprehensiveMotorProtectionandControlFunction
• SystemMonitoringandFaultDiagnose
• CommunicationNetwork
SEN Plus integrates intelligence motor protection and control devices
(MM200/MM300) in MCC, which provide advanced protection such as
overload, short circuit , phase unbalance and stalled rotor. Multiple motor
controlschemescanbeeasilyoffered,includingDOL,Reverse,Y/Δ and soft
starter. Electronic protection relay is powerful and more reliable.
All kinds of system parameters, such as current, voltage, frequency, power
factor and device status, can be measured in time. Motor protection device
will alarm and take proper actions to avoid serious accident happening.
System maintenance times and cost can be reduced. Data analysis and
diagnosefunctionprovidesaccurateandeffectiveinformation,whichhelp
to eliminate fault rapidly and reduce system downtime.
Motorprotectionrelaysupportsmultipleprotocols,hasindependentRS485
and Ethernet interface. The information captured from motor protection
relay, electronic trip unit and meters can be accessed by field bus and
Ethernet communication network. Real-time monitoring, remote control and
parameterconfigurationcanbeachieved.
Feature
Intelligence MCC solution combines control, protection, monitor and communication function together, which help customer to reduce
operation cost and shorten system downtime.
9
StructureFrame
Enclosure
Protection Degree
High strength framework, non-welded self supporting construction and
supportingpartsareadopted.Basicallytheframecontainsoutofjust4parts:
frametubesinonlytwodifferenttypes,cornersandcornerconnectionplates.
The frame tubes, made out of rolled sheet steel, are foreseen of tapped and
punchedfasteningholestofixinternalpartsandcoversatintervalsat25mm.
All external covers and doors are made out off 2mm steel sheet with epoxy
polyester painting. Standard color is RAL 7035. The edges of the covers are
bentoverandflushmountedtotheframestructurebymeansofspacersand
self tapping screws. Overall dimensions will not increase. The standard covers
are of multi-function and can be mounted at the side or the back of the column.
Screwswithcuttingringssecuressufficientearthing.
The doors are provided with inside hinges to mount them to the frame. All doors
are prepunched for door locks, instrument plates for auxillary components and
ventilation openings. The opening angle of the doors is 130 degrees.
Frame tubes, structure parts, roof plates, internal covers and partitions sheets
are made of hot-dip zinc coated steel sheets. Front and side covers use epoxy
polyester powder painting. Ferrous parts use electro-galvanic zinc protecting.
ProtectionhasbeenverifiedinaccordancewithIEC61439-1:Section10.38.38.2
Severity test A.
The roof construction is multifunctional design. The two standard arrangements
are IP30(ventilated roof plate) and IP40 (closed roof plate). Add on materials
enables a simple upgrade to either IP41 by using a rain canopy with an
additional sealing (for roof and between columns) or to IP54 by using the
rain canopy with an additional rubber sealing (for covers, roof and between
columns).
10
StructureBusbarSystemThemainhorizontalbusbarsystem,whichcanbeexecutedasthreephasefourlineorthreephasefivelinesystem,islocatedinthe
busbar zone at the rear of the column. Double busbar structure are used for the panel whose rated current equal or larger than 5000A.
Ratedcurrentofverticalbusbarupto1900A,threeorfourpolesystemcanbeconfigured.Internalseparationsheetsdividethebusbar
zone from the equipment zone and protect the operator against contact with hazardous parts.
The standard positions are: rear top and rear middle up to 4000A, rear top and rear bottom for 5000 and 6300A. In three-pole busbar
systems, the neutral conductor of the main horizontal busbar system is located at the bottom of the column. In four pole busbar
systems the neutral conductor will be arranged under the phases.
The protection circuit is consisted of protection conductor and conducting structure. PE line runs through the whole panel. The
protectionconductor,connectedwithallcomponents,metalpartsandframework,isearthedeffectively.
Three-pole main busbar
(Rated current below 4000A)
Three-pole (double) main busbar
(Rated current 5000,6300A)
Four-pole (double) main busbar
(Rated current 5000,6300A)
Four-pole main busbar
(Rated current below 4000A)
11
Power CenterThe Power Centre is subdivided in three functional zones: busbar zone, equipment zone and cable zone. The busbar zone is located at
the rear of the column and contains the main horizontal and vertical busbar system. Internal separation sheets are dividing the busbar
zone from the equipment zone and are protecting the operator against contact with hazardous parts. Additional separation sheet
can be provided to segregate the equipment zone from the cable zone. Two sets of busbar can be installed according to application
requirement.
Air circuit breakers are installed in equipment zone, rated current up to 6300A. The equipment zone can contain maximal 2 breakers
per column, rated current up to 2500A. High availability is secured by withdrawable technique for circuit breakers.
SEN Plus can install EntelliGuardTM G or M-Pact air circuit breaker, which are equipped with intelligent trip uint . Comprehensive
protection and control function, such as zone selective interlocking, Reduced Energy Let-through, wave capture and communication,
can be provided. Selectivity, high breaking capacity and reliability are available.
Thecablezoneisdesignedforfastandcomfortablecabling.Cablingisthroughpreconfiguratedcopperlinks.Controlcablingthrough
terminal strips. Cables or busways can enter through the top or from the bottom.
12
Structure
Motor Control CenterThe Control Centre is subdivided in three functional zones: busbar zone, equipment zone and cable zone. The busbar zone can be
equipped with maximal two main busbar systems. Standard positions are the top and the middle position. Provisions are taken as
standard to couple the main busbar system to adjacent columns from the front.
Theeffectivestockingdensityintheequipmentzoneis80E(1E=25mm).Thestandardseparationtothebusbarzoneisbymeansof
mouldedplasticfingerproofsheets.FeederandmotorstarterunitsareavailableforDOL,Reverse,Y/Delta,fuseorfuselessapplication.
Rated current in feeder circuit can be up to 630A, max control power in motor unit can be up to 220kW. Fixed type, plug-in and
withdrawable modules can be mixed in one column.
The cable zone is situated on the right hand side from the equipment zone. Cable trays for servicing of all cables are provided as
standard.
13
Motor Control Center• FixedTypeModule
Fixedtypemoduleisusedforfeeder(fuseless)solution.ModulesareavailabletofixthreeorfourpolesversionofMCCBupto630A.The
linesideofbreakertobeconnectedtoVBBbymeansofrigidcopperorcables.Therangeofmoduleheightsvariesfrom8Eto24E.
• PluginModule
Plug in module is used for feeder or motor starter application (with fuse or fuseless) . The range of module sizes varies from 4E to 36E.
• WithdrawableModule
Withdrawable module (5E to 36E) can be used for all feeder or motor starter application (with fuse or fuseless). The module is easy to
use, change and maintain. The working status of the module can be indicated in front panel. Multi-function handle and interlocking
mechanism ensure reliability and prevent wrong operation.
Position Position Indication
Plug In ContactControl Circuitinterlock
Switch Of Wormgear Mech Module PositionPrimary Income
Primary Outgoing Control Circuit
Connected On On On On Inserted
Test Off On On On Inserted
Standby Off On On Off Inserted
Disconnected Off Off Off Off
Mech.
Connected
contacts
disconnected
Removed Off Off Off OffOutside
the panel
14
400/500/600
2200
600/800/1000
2200
1000/1200
2200
2200
600 200/400/600
Dimension and Arrangement
Power center
SEN Plus Dimension
Arrangement
Motor control center
Width (mm) Depth (mm) Height (mm)
Power center
Below2000A 400/500/600 600/800 2200
2500-4000A 600/800/1000 600/800/1000 2200
5000-6300A 1000/1200 1200 2200
Motor control center
Withdrawable 800/1000/1200 600/800 2200
Fixed type 800/1000/1200 600/800 2200
Plug-in 800/1000/1200 600/800 2200
600/800/1000/1200mm
Larger than1200mm
100mm(*)
The column is wall standing type what means that it can be installed at the wall, however, it is advised to keep 100 mm distances from
wall, and keep 500mm from the ceiling.
15
Main ComponentsAirCircuitBreakerEntelliguardTM G
AirCircuitBreakerM-Pact
EntelliGuard™ G is a line of three and four pole devices ranging from 400 to
6400A mp in three basic frames with fault interruption ratings of Up to 150kA,
complying with IEC, CCC, ANS and UL standard. A design offering a unique
combination of high fault current withstand ratings, short fault interruption times
and selectivity. EntelliGuard™ G TU trip unit that enables the circuit breaker with
the latest technology for system safety, reliability, measurement, relaying and
communicationsusingtheModbusorProfibusProtocol.
Rated from 400 to 4000A, the M-PACT circuit breaker has been designed to meet
the strictest demands in fault detection and protection. The range has been
developed to be aesthetically and technically co-ordinated with other protective
devices. The breaker range has a common height and depth and is available in
both fixed pattern and drawout versions, which can be manually or electrically
operated.Designedtooffermultiplemainsconnectionoptions,italsocomeswitha
wide range of easy-to-install accessories.
MCCBRecordPlus
Intelligent Motor Protection Relay
Ratedcurrentfrom3to630A,RecordPlusMCCBisdesignedfordistributionand
control system. Three and four poles, fixed, plug-in and withdrawable type are
available,breakingcapacityrangingfrom18to150kA.Thebreakerhasexcellent
current limiting capacity with circle double contact structur. Modularized design,
high reliability.
MM200/300 are digital motor protection and control system, designed for Low
Voltage motor applications. MM200/300 can provide comprehensive protection
function including overload, ground fault, stalled and phase unbalance. The relay
includes high accuracy metering for all AC signals. Current and voltage parameters
are available as total RMS magnitude and angle. MM200/300 utilizes advanced
communications technologies, making it easy and flexible to use and integrate
into new and existing infrastructures. Multiple communication protocols, including
ModbusRTU,ProfibusDP,Devicenet,arecompatible.
16
StandardandCertificates
Type Test:• IEC61439-2Low-voltageswitchgearandcontrolassemblies-Part2:Powerswitchgearandcontrolgearassemblies.
*ThemodifiedandupdatedstandardreleasedbyInternationalelectricalcommitteein2009,basedonIEC60439standard.
Special Test:• IEC60068-2-57Environmenttesting-Part2-57:TestFf:Vibration-Timehistorymethod
*Vibration environment test in horizontal and vertical direction.
• IEC/TR361641:2008-01Enclosed low-voltageswitchgearandcontrolgearassemblies-Guide for testingunder
conditions of arcing due to internal fault
*International arcing fault protection standard.
• IEC60529Degreesofprotectionprovidedbyenclosures
*DefineIPnumbersusedtoquantifythedegreeofprotectionprovidedbyenclosures.
• IEC60068-2-30Definingresistancetodampandheat
*Wet Heat, 6 cycle with 24 h, 400C, 95 % rel. humidity.
• IEC60068-2-11Definingresistancetosaltmist
*Salt fork, 2 cycle with 24 h, 350C.
SEN Plus Complies with Following International Standards:
17
Standard SolutionPowerCenterwithACBEntelliGuardTM G
Rated Current (A) Frame 3 Poles 4 Poles Width
(mm)Depth(mm)
BreakingCapacity/400VAC65kA 80kA 100kA
WithdrawableOneBreaker:Incomer/FeederorBuscoupler
1000 1 500 600/800
600 600/800
1600 1 500 600/800
600 600/800
2000 1 500 600/800
600 600/800
2500 2 600 600/800
800 600/800
3200 2 800 800
800 800
4000 2 1000 800
1000 800
5000 3 1000 1200
1200 1200
6300 3 1000 1200
1200 1200
FixedOneBreaker:Incomer/FeederorBuscoupler
1000 1 400 600/800
600 600/800
1600 1 500 600/800
600 600/800
2000 1 500 600/800
600 600/800
2500 2 600 600/800
800 600/800
3200 2 800 800
800 800
18
Standard SolutionPowerCenterwithACBEntelliGuardTM G
Rated Current (A) Frame 3 Poles 4 Poles Width
(mm)Depth(mm)
BreakingCapacity/400VAC65kA 80kA
WithdrawableTwoBreakers:IncomerPlusBuscoupler1000 1 500 600/800
600 600/8001600 1 500 600/800
600 600/800FixedTwoBreakers:IncomerPlusBuscoupler
1000 1 400 600/800600 600/800
1600 1 500 600/800600 600/800
Fixed/WithdrawableTwoBreakers:TwoFeeders1000 1 600 800
800 8001600 1 600 800
800 8002000 1 800 800
800 8002500 2 800 800
800 800
PowerCenterwithACBM-PactRated Current
(A) Frame 3 Poles 4 Poles Width(mm)
Depth(mm)
BreakingCapacity/400VAC65kA 80kA
WithdrawableOneBreaker:Incomer/FeederOrBuscoupler1000 1 400 600/800
600 600/8001600 1 500 600/800
600 600/8002500 1 600 600/800
600 600/8003200 2 800 800
800 8004000 2 800 800
800 800TwoBreakers:IncomerPlusBuscoupler
1000 1 400 600/800600 600/800
1600 1 500 600/800600 600/800
FixedTwoBreakers:TwoFeeders1000 1 600
800 600/8001600 1 600 600/800
800 600/8002500 1 800 600/800
800 600/800
19
Motor Control Center
Fixed Modules
Feeder (3 Poles) Feeder (4 Poles)
Current (A) Module size (E) Current (A) Module Size (E)
400Vac
160 8 160 8
250 10 250 10
400 10 400 10
630 10 630 10
500Vac
160 8 160 8
250 10 250 10
400 10 400 10
630 10 630 10
690Vac
160 8 160 8
250 10 250 10
400 10 400 10
630 10 630 10
Plug-in Modules
Motor Starter Dol Motor Starter Reverse MotorStarterY/Δ Feeder (3 Poles) Feeder (4 Poles)
Max Load(kW)
Module Size (E)
Max Load(kW)
Module Size (E)
Max Load(kW)
Module Size (E)
Current(A)
Module Size (E)
Current(A)
Module Size (E)
400Vac
30 4 30 4 30 4 63 4 63 8
37 5 55 18 55 24 160 8 160 8
55 10 90 24 90 24 400 10 400 10
220 18 110 30 110 30 630 18 630 18
220 30 200 30
690Vac
11 10 11 10 15 18 63 8 63 8
30 10 30 10 75 24 160 8 160 8
75 18 75 18 132 24 400 24 400 24
132 18 160 24 220 36 630 24 630 24
220 18 250 36 250 36
20
Standard SolutionMotor Control Center
Withdrawable Modules
Motor Starter Dol Motor Starter Reverse MotorStarterY/Δ Feeder (3 Poles) Feeder (4 Poles)
Max Load(kW)
Module Size (E)
Max Load(kW)
Module Size (E)
Max Load(kW)
Module Size (E)
Current(A)
Module Size (E)
Current(A)
Module Size (E)
400Vac
30 5 30 8 30 10 63 5 63 6
37 5 55 30 55 30 160 5 160 6
55 18 90 30 90 30 400 10 400 12
220 24 110 30 110 30 630 10 630 12
220 30 200 36
690Vac
11 12 11 12 15 18 63 5 63 10
30 12 30 12 75 30 160 10 160 10
75 12 75 12 132 30 400 10 400 12
132 18 160 24 220 30 630 10 630 12
220 30 250 36 250 36
21
Primary Scheme
Scheme No 01 02 03 04 05 06
Primary Scheme
Cubical Width (mm) 400 500 600 800 800 1000
Unit Height 80E 80E 80E 80E 80E 80E
Max.Working Current (A) 1000 2000 2500 3200 4000 6300
Main EquipmentMP-800~1000
EntelliGuardTM G -1000
MP-1600EntelliGuardTM G -1000~2000
MP-2500EntelliGuardTM G
-2500
EntelliGuardTM G -3200
MP-3200~4000
EntelliGuardTM G -4000~6300
Application Upper input (output) (three-pole switch)
Scheme No 07 08 09 10 11
Primary Scheme
Cubical Width (mm) 400 600 800 1000 1200
Unit Height 80E 80E 80E 80E 80E
Max. Working
Current (A)800 2500 4000 4000 6300
Main Equipment MP-800
MP-1000~2500EntelliGuardTM G-1000~2000
MP-3200~4000EntelliGuardTM G-2500~3200
EntelliGuardTM G-4000
EntelliGuardTM G-5000~6300*
Application Upper input (output) (quadru-pole switch)
22
Primary Scheme
Scheme No 12 13 14 15 16 17
Primary Scheme
Cubical Width (mm) 400 500 600 800 800 1000
Unit Height 80E 80E 80E 80E 80E 80E
Max. Working
Current (A)1000 2000 2500 3200 4000 6300
Main EquipmentMP-800~1000
EntelliGuardTM G-1000
MP-1600EntelliGuardTM G-1000~2000
MP-2500EntelliGuardTM G
-2500
EntelliGuardTM G-3200
MP-3200~4000
EntelliGuardTM G-4000~6300
Application Lower input (output) (three-pole switch)
Scheme No 18 19 20 21 22
Primary Scheme
Cubical Width (mm) 400 600 800 1000 1200
Unit Height 80E 80E 80E 80E 80E
Max. Working
Current (A)800 2500 4000 4000 6300
Main Equipment MP-800MP-1000~2500EntelliGuardTM G-1000~2000
MP-3200~4000EntelliGuardTM G-2500~3200
EntelliGuardTM G-4000
EntelliGuardTM G-5000~6300
Application lower input (output) (quadru-pole switch)
23
Scheme No 23 24 25 26 27 28
Primary Scheme
Cubical Width (mm) 400 500 600 800 1000 1000
Unit Height 80E 80E 80E 80E 80E 80E
Max. Working
Current (A)1000 2000 2500 4000 6300
Main EquipmentMP-800~1000
EntelliGuardTM G-1000
MP-1600EntelliGuardTM G-1000~2000
MP-2500EntelliGuardTM G
-2500
MP-3200~4000EntelliGuardTM G
-3200
EntelliGuardTM G-4000~6300
Application Busbarcoupling(three-poleswitch) Busbarlifting
Scheme No 29 30 31 32 33
Primary Scheme
Cubical Width (mm) 400 600 800 1000 1200
Unit Height 80E 80E 80E 80E 80E
Max. Working
Current (A)800 2500 4000 4000 6300
Main Equipment MP-800MP-1000~2500EntelliGuardTM G-1000~2000
MP-3200~4000EntelliGuardTM G-2500~3200
EntelliGuardTM G-4000
EntelliGuardTM G-5000~6300
Application Busbarcoupling(quadru-poleswitch)
24
Scheme No 34 35 36 37 38 39 40 41
Primary Scheme
Cubical Width (mm) 400 500 600 500 600 600 800 800
Unit Height 80E 80E 80E 80E 80E 80E 80E 80E
Max. Working
Current (A)1000 1600 1600 1000 1600 1600 2500 2500
Main EquipmentMP-1000
EntelliGuardTM G-1000
EntelliGuardTM G-1600 MP-1600 MP-1000
MP-1600EntelliGuardTM G-1000~1600
MP-1000~1600EntelliGuardTM G-1000~2000
MP-2500EntelliGuardTM G-2000~2500
MP-1000~2500EntelliGuardTM G-1000~2500
Application IncomerplusBusbarcoupling(three-pole switch)
IncomerplusBusbarcoupling
(quadru-pole switch)
Feeder (Lower or Upper output)(three-pole switch)
Feeder(Lower or Upper output)(quadru-pole
switch)
Scheme No 42 43 44 45 46 47
Primary Scheme
Cubical Width (mm) 800/1000/1200 800/1000/1200
Unit Height 8E 10E 5E 8E 10E 18E
Max.Working
Current (A)160 630 63 160 400 630
Main EquipmentRecord Plus
FD160Record Plus
FE250 FG400 FG630
Record PlusFD160
Record PlusFD160
Record PlusFG400
Record PlusFG630
Application Fixed Feeder (Lower or Upper output)(three/quadru-pole switch)
Plug-in Feeder (Lower or Upper output)(three-pole switch)
Primary Scheme
25
Scheme No 48 49 50 51 52 53 54
Primary Scheme
Cubical Width (mm) 800/1000/1200 800/1000/1200 800/1000/1200
Unit Height 8E 10E 18E 5E 10E 6E 12E
Max. Working
Current (A)160 400 630 160 630 160 630
Main Equipment Record PlusFD160
Record PlusFG400
Record PlusFG630
Record PlusFD160
Record PlusFE250, FG400
FG630
Record PlusFD160
Record PlusFG400FG630
Application Plug-in Feeder (Lower or Upper output)(quadru-pole switch)
Withdrawable Feeder (Lower or Upper output) (three-pole switch)
Withdrawable Feeder (Lower or Upper output)(quadru-pole switch)
Scheme No 55 56 57 58 59 60 61
Primary Scheme
Cubical Width (mm) 800/1000/1200 800/1000/1200 800/1000/1200
Unit Height 4E 6E 5E 8E 10E 18E 5E 8E 18E 24E
Max. Control Power
(kw)30 37 55 220 37 75 220
Main EquipmentGPS1BHAE~GPS2BHAUCL00~CL07
FD160~FE160CL08RT2J
FD160~FE160CK85B
RT2L~RT2M
FE160~FG630CK95B~CK10CRT3E~RT5D
GPS1BHAE~GPS2BHAUCL00~CL07
FD160CL08RT2J
FD160~FE160CK85B~CK95BRT2L~RT3E
FE250~FG630CK95B~CK10CRT4N~RT5D
Application Plug-in Motor Direct on line starter with circuit breaker Withdrawble Motor Direct on line starter with circuit breaker
26
Scheme No 62 63 64 65 66 67 68 69
Primary Scheme
Cubical Width (mm) 800/1000/1200 800/1000/1200 800/1000/1200 800/1000/1200
Unit Height 6E 8E 12E 18E 24E 6E 8E 8E 10E 12E 24E
Max. Control Power
(kw)30 37 55 132 15 30 37 75
Main EquipmentGPS1BHAE~GPS2BHAUCL00~CL07
FD160~FE160CL08RT2J
FD160~FE160CK85B
RT2L~RT2M
FE250CK95B~CK10CRT3E~RT4R
GPS1BHAE~GPS2BHARCL00~CL04
GPS1BHAS~GPS2BHAUCL04~CL07
FD160CL07RT2J
FD160~FE160CK85B~CK95BRT2J~RT3E
Application Fixed Motor Direct on line starter with circuit breaker Fixed Motor Direct on line starter with circuit breaker/Reversible
Scheme No 70 71 72 73 74 75 76 77 78
Primary Scheme
Cubical Width (mm) 800/1000/1200 800/1000/1200
Unit Height 4E 6E 8E 10E 18E 24E 30E 5E 8E 10E 30E
Max. Control Power
(kw)30 37 75 90 220 30 37 220
Main EquipmentGPS1BHAE~GPS2BHAUCL00~CL07
FD160CL07RT2J
FD160~FE160CK85B~CK95BRT2L~RT3E
FE250CK95BRT4N
FE250~FG630CK10C
RT4R~RT5D
GPS1BHAE~GPS2BHAUCL00~CL07
FD160CL07RT2J
FD160~FG630CK85B~CK10CRT2L~RT5D
Application Plug-in Motor Direct on line starterwith circuit breaker/Reversible
Withdrawable Motor Direct on line starterwith circuit breaker/Reversible
Primary Scheme
27
Scheme No 79 80 81 82 83 84 85 86 87
Primary Scheme
Cubical Width (mm) 800/1000/1200 800/1000/1200
Unit Height 4E 6E 18E 24E 30E 10E 18E 24E 30E 36E
Max. Control Power
(kw)30 37 90 220 30 37 45 132 220
Main EquipmentGPS1BHAE~GPS2BHAUCL00~CL07
FD160CL07CL04RT4LJ
FD160~FE250CK85B~CK95BCL06~CL07RT4LJ~RT4LM
FE250~FG630CK10C
CK10~CK08CRT5A~RT5B
GPS1MHAN~GPS2MHAUCL25~CL07CL00~CL04RT1N~RT2E
FD160CL07CL04RT4LJ
FD160CK85BCL06RT4LJ
FD160~FE250CK85B~CK10CCL06~CL10RT4LK~RT5A
FG400~FG630CK10C
CK75C~CK08CRT5A~RT5B
Application Plug-in Star-Delta Motor-starter Withdrawable Star-Delta Motor-starterwith circuit breaker
Scheme No 88 89 90 91
Primary Scheme
Cubical Width (mm) 800 1000 800 1000
Unit Height 80E 80E 80E 80E
Max.Compersation
Capacity30x10=300 30x12=360 30x8=240 30x10=300
Main Equipment FG630/3PRT20-100A
FK800/3PRT20-100A
FG400/3PRT20-100A
FG630/3PRT20-100A
Application Reactive power compensation Wave-filtertypereactivepowercompensation p=XL/XC=0.7%
REGIONAL OFFICES
NORTH
BRANCH OFFICES
Gurgaon
GE India Industrial Pvt. Ltd.5th Floor, Building No.7A DLF Cyber City, DLF Phase-IIISector 25 A, GurgaonHaryana – 122002Ph: (0124) 4808000Fax: (0124) 4226911 / 4226912
Chandigarh
GE India Industrial Pvt. Ltd.SCO No. 72 & 73, First FloorSector 8/C, Madhya MargChandigarh-160008Ph: (0172) 3982908-10Fax: (0172) 3982905
Jaipur
GE India Industrial Pvt. Ltd.448, 4th Floor, Ganapati PlazaM.I. Road, Jaipur-302001Ph: (0141) 5112802Fax: (0141) 2389012
Lucknow
GE India Industrial Pvt. Ltd.101, Ace Business Center19, Vidhan Sabha MargLucknow-226001Ph: (0522) 3203808, 3012444/666Fax: (0522) 4045909
SOUTH
Bangalore
GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199
Chennai
GE India Industrial Pvt. Ltd.Temple Tower, 6th Floor476, (New No. 672) Anna SalaiNandanamChennai-600035Ph: (044) 45070470-84Fax: (044) 45070474
Coimbatore
GE India Industrial Pvt. Ltd.No.36/6 & 7, 1st FloorAshirwad BuildingD.B.Road, R.S. PuramCoimbatore-641002Ph: (0422) 4393520 / 4393529
WEST
Mumbai
GE India Industrial Pvt. Ltd.361/362, Solitaire Corporate ParkM. Vasanji Road, ChakalaAndheri (E), Mumbai-400093Ph: (022) 40101610Fax: (022) 40101611
EAST
Kolkata
GE India Industrial Pvt. Ltd.Horizon Building, 4th Floor 57, Chowringhee RoadKolkata-700071Ph: (033) 40034056Fax: (033) 40034071
Works:GE India Industrial Pvt. Ltd.Plot No. 42/1 & 45/14Electronic City - Phase IIBangalore-560100Ph: (080) 41113000Fax: (080) 28528469/552
HO:GE India Industrial Pvt. Ltd.The Millenia, Level-6, Tower B1 & 2, Murphy Road, UlsoorBangalore-560008Ph: (080) 41434000Fax: (080) 41434199Email: [email protected]
Toll Free No:18001024343
Customer Care:[email protected]
g and General Electric are registered trade marks of General Electric Co. USA©
Ahmedabad
GE India Industrial Pvt. Ltd.405-406, Kirtiman ComplexKinariwala House, Behind CitibankOff C.G. Road, Ahmedabad-380006Ph: (079) 65427385/65427389Fax: (079) 26460637
Pune
GE Money Financial Services LimitedShop No. 405-410, 4th FloorCity Point, Dhole Patil RoadPune-411001Ph: (020) 41266999Fax: (020) 41266109
Cochin
GE India Industrial Pvt. Ltd.Mayur Business Center & MotelChittur Road, Pullepadi JunctionCochin-682035Ph: (0484) 2364139Fax: (0484) 4031400
Hyderabad
GE India Industrial Pvt. Ltd.5-2-45, Hyderbasti, RP RoadNear Gujarati High SchoolSecunderabad-500003Ph: (040) 27543162, 66311264Fax: (040) 66339272
We are committed to continuous development and improvement of our products and the specifications aresubject to change without notice. For product availability and latest prices, please contact GE Sales Team.
For any further information, visit us at http://www.geindustrial.com
0112
/CAT
/SEN
PLU
S