sile c hines - altervista
TRANSCRIPT
![Page 1: SILE C HINES - Altervista](https://reader030.vdocuments.net/reader030/viewer/2022012712/61ab7a389373ab68237ba168/html5/thumbnails/1.jpg)
2.1 - Simple Machines
1
A machine is a device that helps us perform tasks. It is designed to achieve one of five main functions
1. Change energy from one form to another
2. Change direction of a force
3. Change the magnitude of a force
4. Transfer forces
5. Change distance or speed
Simple machines can be split into two families: the Lever Family of machines and the Inclined Plane Family of machines.
SIMPLE MACHINES
INTRODUCTION
![Page 2: SILE C HINES - Altervista](https://reader030.vdocuments.net/reader030/viewer/2022012712/61ab7a389373ab68237ba168/html5/thumbnails/2.jpg)
2.1 - Simple Machines
2
SIMPLE MACHINES
THE LEVER FAMILY OF MACHINES
The lever family of machines consists of the lever, the pulley, the wheel and axle, and gears.
1. Lever - A rigid bar that can rotate freely around a pivot called the fulcrum. An effort force, FE, is applied to one part of the lever in order to move the load which exerts a force, FL, on some other part of the lever.
There are three classes of levers:
1st class - Fulcrum is in the middle
2nd class - Load is in the middle
3rd class - Effort force is in the middle
![Page 3: SILE C HINES - Altervista](https://reader030.vdocuments.net/reader030/viewer/2022012712/61ab7a389373ab68237ba168/html5/thumbnails/3.jpg)
2.1 - Simple Machines
3
SIMPLE MACHINES
2. Pulley
A wheel with a grooved rim in which a rope runs.
3. Wheel and Axle
A large diameter disk connected to a small diameter rod.
4. Gears
Toothed wheels of different diameters.
![Page 4: SILE C HINES - Altervista](https://reader030.vdocuments.net/reader030/viewer/2022012712/61ab7a389373ab68237ba168/html5/thumbnails/4.jpg)
2.1 - Simple Machines
4
SIMPLE MACHINES
THE INCLINED PLANE FAMILY OF MACHINES
The inclined family of machines consists of the inclined plane, the wedge, and the screw.
1. Inclined Plane
A ramp. Less force is required to move an object up a ramp then raise it vertically.
2. Wedge
Double inclined plane.
3. Screw
An inclined plane wrapped around a central shaft.
![Page 5: SILE C HINES - Altervista](https://reader030.vdocuments.net/reader030/viewer/2022012712/61ab7a389373ab68237ba168/html5/thumbnails/5.jpg)
2.1 - Simple Machines
5
SIMPLE MACHINES - LAB
![Page 6: SILE C HINES - Altervista](https://reader030.vdocuments.net/reader030/viewer/2022012712/61ab7a389373ab68237ba168/html5/thumbnails/6.jpg)
2.1 - Simple Machines
6
D. Add another pulley (if time permits). Draw it to the right.
SIMPLE MACHINES - LAB
![Page 7: SILE C HINES - Altervista](https://reader030.vdocuments.net/reader030/viewer/2022012712/61ab7a389373ab68237ba168/html5/thumbnails/7.jpg)
2.1 - Simple Machines
7
Pulley Setup C (and D - if attempted):
Pulley Setup B:
2.
SIMPLE MACHINES - LAB
CONCLUSION - What are your experimental findings?
______________________________________________________________________
______________________________________________________________________
______________________________________________________________________