smart agriculture en 2019 view...wide area network (lpwan). this technology is designed to provide...

www.elkoep.com/agriculture

Smart AgricultureIoT services for farmers

1

2 3

ELKO EPFarming and modern technology

We cannot predict the wind and rain precisely; we

can however, monitor and evaluate them very well.

Modern technology can make life easier and doesn’t

work only in homes but in commercial buildings and

smart cities. Technology can be a great help also were

Every good farmer, be it a grower, a breeder, a win-

emaker, a beekeeper or a forester, puts a lot of effort

and money into the proper management of his produc-

tion areas, but circumstances do not always allow him

Saving money

Increase security

you would not expect it - on farms, vineyards, fields or

forests, especially if it is automated and communicates

efficiently. It makes work easier and more efficient,

with better property protection, and helps prevent and

speeds up crisis response.

Workeffi ciency

Meterological Conditions

Wind

Temperature Sun light

Freezing

RainHumidity

Natural disasters Unpredictable Conditions

Drought

Flood

Fire

DiseasesPests

Insects

Vermin

Wild Animals

Mould

Cro

p disease

A

nimal disease

A

nimal Escape

Failure

Theft

Energy waste

Higher crop yield

Worker comfort

We are traditional, in-novative and purely Czech development manufacturer of elec-tronic devices and we have been your partner in the fi eld of electri-cal autorealization for more than 26 years.

ELKO EP employes 330 people, exports its products to

more than seventy countries and has representatives in

thirteen foreign branches. The Company of the Year, Vi-

sionary of the Year, Global Exporter of the Year, sorted in

the Czech TOP 100, are just some of the awards received.

Still, we are not finished. We are constantly striving to

move forward in the field of innovation and develop-

ment. That is our primary concern.

Millions of relays, thousands of satisfied customers, hun-

dreds of employees, twenty-six years of research, devel-

opment and production, thirteen foreign branches, one

firm. ELKO EP, an innovative Czech company based in

Holešov, where development, production, logistics, ser-

vice and support go hand in hand. We focus primarily

on developing and manufacturing, building automation

systems in the residential, commercial and industrial sec-

tors, along a wide range of Smart city facilities and the

so-called Internet of Things (IoT).

Main MOTIVATORS

to harvest the crops appropriately. Farmers are par-

ticularly worried about weather conditions - tempera-

ture fluctuations, unforeseen precipitation, long-term

drought, and soil moisture - all result in lower yields.

10

4 5

iNELS Air is our response to the dynamically developing

network for IoT (Internet of Things). The IoT wireless

communications category describes the Low Power

Wide Area Network (LPWAN). This technology is

designed to provide both full-area outdoor coverage

and indoor signal, energy-saving and low-cost

operation of individual devices.

The iNELS Air product family devices understand

working on the Sigfox, LoRa and NB-IoT networks

(protocols).

iNELS Air

Base TransceiverStation

IoT networks

This term includes the concept of connecting appli-

ances, machines, sensors to an existing internet struc-

ture. This structure uses a specially designed network

for small data transfer and low power consumption

over long distances. For our devices we use Sigfox,

LoRa and NB-IoT networks (protocols) LPWAN.

The data from the device are sent via the BTS (Base

Transceiver Station) to the backend from where it is

sent to the ELKO Cloud. Data can be accessed via

web interface (web browser in computer or smart-

phone) according to user requirements.

Mobile browser ELKO Cloud

Input module

Motion Detector

Smoke Detector

Magnetic detector

Liquid level Sensor

Air Quality Sensor - carbon monoxide

Street light controller

Input module- for DIN rail

Flood detector

Air Quality Sensor - carbon dioxide

Pulse transmitter

Waste bin sensor

LPWAN

21 3

4 5 6 7

9

2

84

3

7

6

1

Product line

Type of device

NetworkS - SigfoxL - LoraNB - NarrowBand

5

LAN

IM - Input moduleMD - Motion detectorPS - Parking sensorQS - Air quality sensorSA - Switching actuatorSD - Smoke detectorSF - Flood detectorSLC - Street light controllerSOU - Twilight sensorTM - Pulse transmitterWD - Magnetic detectorWS - Waste bin sensor

8

9

API

Backend

Gyroscopic detector

10

6 7

Display and control

The status of individual iNELS Air devices can be viewed and controled

in several ways. The primary repository of all collected information is

the ELKO Cloud. From it, you can view your data on your smartphone

web browser where you can also set notifications like pop-ups in the

top bar of your phone or directly to your email or SMS. Linking the

ELKO Cloud also offers the possibility of linking iNELS Air devices to

the Internet of Things structure (IoT).

Smartphone

ELKO Cloud

Notifications

For easy viewing of your data on a computer, smart phone or tablet,use the ELKO Cloud, which, in addi-tion to the current status, also stores the history of the data from your sen-sors. ELKO Cloud gives you overall view (maps, datas, graphs).

A simple way to check the current status of all connected sensors or detected consumption within your smartphone. Quick overview and easy control wherever you are.

You can get information about event occurrences by SMS.

SignallingIf the pre-set conditions are inter-rupted, actuator can switch a light will illuminate or an alarm will sound.

Pasturespages 18–19

Meadows pages 18–19

Forestspages 18–19

BeehivesBeehives pages 22–23

Farmpages 8-9

Fieldspages 12–13

Greenhouses pages 14–15

Vineyardpages 16–17

Poultry housespages 20–21 Warehouses

pages 24–25

Garagespages 10–11Stables

pages 10–11

Offi cespages 10–11

8 9

Farm

Every good farmer likes secure areas. After all, here

there is everything, buildings, machinery and the har-

vest from September. The motion sensors and the

camera system provide the viewer with the perfect

overview of any events in the area, even if they are not

present. Noise sensors protect agricultural machinery

from theft. In the event that an unauthorized person

enters, the owner is immediately informed and can

also light the lights in the area and trigger an alarm.

But smart technology can also help to considerably

save energy. An example is a light that automatically

switches on at dusk, while lit with minimal brightness.

When motion is detected, the illumination lights up to

full brightness and then decreases to a pre-set value.

Seemingly small but significant relief can be gained

with the possibility of the remote opening of gates,

and other entrances through a smartphone, which also

informs about their possible undesirable opening. The

system is fully variable, so the farmer only chooses the

elements he currently needs, and then later can add

to them at any time.

Noise measurementThe AirNOISE sensor measures the ambi-

ent noise level (dB). In case of a sudden in-

crease in noise, it sends information about

the event. For example, when a tractor is

started unlawfully.

Twilight sensorThe AirSOU sensor senses the current light

intensity at a given location. Depending on

the intensity measured, the intensity of the

artifi cial lighting can be adjusted. This sim-

ple concept can eff ectively reduce power

consumption.

Motion detectionThe AirMD-101 outdoor motion detector is

designed to detect the movement of peo-

ple, machines and animals in the monitored

outdoor area.

Device status monitoring

1

2

2

3

4

6

6

3

4

Outdoor magnetic detectorAirWD-101

Detection of opening

gates and doors

1

The AirIM input module, in conjunction

with the appropriate monitoring relay,

monitors the current status of the appli-

ances and detects critical and emergency

conditions.

• magnet (B) controls dry-reed relay (A)

• Change of state of the detector message is sent when the magnet is moved away from the device

• Status change information is sent to ELKO Cloud

• User can be informed by SMS, e-mail or smartphone notifi cation

• The operator has the option of clos-ing the door or the gate (see page 10)

The remote access camera system pro-

vides a perfect view of events in an area

at any time and from anywhere. The data

is stored in the server. The information

can be displayed in applications on your

computer or smartphone.

CCTV Camera System5

5

2

1

A B

1

10 11

Farm buildings

Smart technology makes it easy to work on farms. We

offer a variety of monitoring sensors connected to

one central unit that evaluates the scanned data and

informs the user about the actual values or critical

states. Thanks to a wide range of sensors, it is possible

to monitor a range of variables, such as temperature,

humidity, voltage or current, or to measure energy

consumption.

Other sensors highlight open gates, doors or windows,

strangers, the presence of undesirable substances in

the air of farm buildings, and also monitor the state

of feed and the supply of fresh water to farm animals.

Additionally, with disasters such as fire or leaking water,

the farmer is warned in time and can intervene before

large-scale damage occurs.

Garages for parking expensive agricultural machines

and their accessories tend to be the target of thieves,

so it is advisable to provide these facilities with some

of the monitoring safeguards.

An important part of each farm is also the office where

it is possible to rely on smart lighting technology, main-

taining pre-set climatic conditions, theft security, evi-

dence of arrivals and departures of staff, or controlling

energy consumption.

Intrusion DetectionThe AirMD-100 indoor magnetic detector

is used to detect open gates, doors and

windows where there is a risk of intrusion

of unauthorized persons or the escape of

livestock.

Smoke Detector

Maintain pre-set conditions The AirIM input module records the current

temperature and humidity in the areas. This

makes it possible to maintain ideal breed-

ing conditions.

Lighting control

Motion detectionThe AirMD indoor motion detector detects

movement of persons, animals or machin-

ery in the interiors of buildings.

The Air-11 switch actuator switches the

feed or fl uid dispenser on/off at set times.

Switching actuatorAirSA-11

Gate remote control1

Automatic dispensing of feed and fl uids

1

The Air SD smoke detector notices the

presence of smoke in the room, an alarm

is triggered and the operator is alerted

immediately.

2

3

4

5

6

7Also in halls, buildings or offi ces, it is

desirable to regulate the intensity of light

sources. The Air-SLC actuator works for

this purpose. Nowhere will be lit unneces-

sarily. (More in catalogue Smart Street

Lighting)

• The switch actuator can be used to remotely switch gate driver

• The actuator is equipped with a relay with a changeover contact, which enables to switch high cur-rent loads up to 16A

1

2

3

45 5

5 5

6

6

7

4

2

1

12 13

1

Fields

Information on the current state of conditions in the

fields is essential for timely and correct decision-mak-

ing on further crop cultivation. Sensors and weath-

er stations can monitor the state of the conditions

(temperature, humidity and soil, precipitation, wind

strength and direction) on production areas. The data

is stored in the ELKO Cloud. The information can be

displayed clearly in applications on your computer or

smartphone. The recorded data is further evaluated

and subsequently developed. Farmers can therefore

decide in time on the appropriate procedures to take,

thus eliminating possible harvest losses or, on the

contrary, increasing production.

Humidity level assessment has a significant meaning

especially when determining of fuel consumption of

agriculture machines - When tyres are slipping be-

cause of wet soil, then fuel consumption can increase

up to twice.

When exceeding or falling below the critical level, the

system immediately sends the information to a mobile

phone. Frequent risks are for example floods that com-

mit massive damage. Smart technology helps to warn

against their threat in a timely manner. Farmers can,

as far as it is possible, allow the floodwater to spill out

of their fields, for example into the meadows.

Vibration sensor

Liquid level sensorThe AirIM input module with the appropri-

ate probe detects the water level, if the

critical threshold is exceeded, an alert will

be sent to the farmer.

Weather stationThe AirMETEO weather station detects

wind speed, direction, temperature, humid-

ity and light level directly in the fi eld.

The AirSEIS shock sensor senses vibrations

belonging to cars of unauthorized persons.

An alert is sent when excessive vibration is

detected.

Noise measurementThe AirNOISE sensor measures the ambi-

ent noise level (dB). In case of a sudden

increase in noise, it sends information

about the event. For example, when a

tractor is started unlawfully.

4

1

3

5

2

Measurement of current

crop conditions

Input moduleAirIM

Measurement of soil moistureThe AirIM input module with external

humidity sensor records and sends current

status information, at a depth of 25 to 30

cm below ground.

2

4

5

63

6• input module can be understood as universal device for connecting of various sensors or detectors

• it monitors temperature and humid-ity in the cover, but its capability can be extended by leaf wetness sensor, soil humidity sensor and many other ones

• sends data to server at regular intervals

• you can conveniently view your data in a PC application or smart-phone

14 15

Greenhouses

Greenhouses allow provision for the almost perfect

conditions for the growth of crops, practically at any

time of the year. Fruit is therefore weather-independent

and more bountiful than when growing outdoors.

However, in greenhouses, it is necessary to ensure

optimal conditions for growth, i.e. correct temperature,

humidity, intensity and length of lighting, and to ensure

ventilation and more. Smart technology connected to

the central unit will record data on current greenhouse

conditions and the farmer can make a decision on the

next cultivation process on their basis. The ideal condi-

tions, however, can be monitored and maintained by

the system without the intervention of a human being

Smart technology can completely control the entire

operation of greenhouses. Moisture sensors trigger

irrigation only when it is needed, in case of lack of

sunshine, the light with the pre-set colour spectrum

switches on, if it starts to rain, the windows are closed,

when the rain stops they open again.

Greenhouses under the control of smart technology

will always deliver a perfect harvest that will please

with both the high yield and the quality of the crops

and of course especially the great taste.

Measurement of current crop conditions

Twilight sensorThe AirSOU sensor controls the intensity

of the greenhouse lighting. If the intensity

of natural light drops below the desired

value, it can activate the artifi cial light.

The AirIM input module with temperature

and humidity sensor records the current

state of the quantities in the crops.

Automatic irrigationIf the system detects a shortfall of the soil

moisture condition, the irrigation starts au-

tomatically with the valve being operated.


4

1 Measurement of soil

moisture

Input module + Soil humidity sensorAirIM + ECH-20 GS-1

The AirIM input module, in conjunction




conditions.

4 4 4

2

2

3

Air quality monitoringIf the AirQS sensor detects the exceedance

of the critical CO2 values, the windows will

be automatically opened.

4

5

6

5

5

1

3 3

• monitors the current humidity sta-tus in the soil

• sends data to the ELKO Cloud re-pository at regular intervals

• You can conveniently view your data on a PC platform or smart-phone

6

11

16 17

Vineyard

The basis for producing delicious wines is healthy and

mature grapes. Furthermore, it depends on the skill,

experience and capabilities of the winemaker.

Smart technology can also help with providing a good

foundation. The main use is to find current actual data

on the meteorological situation and the current con-

ditions not only in the vineyard itself but also in the

soil where the temperature and humidity are sensed.

Using weather stations and other sensors connected

to the ELKO Cloud, we can closely monitor many vari-

ables that can prevent unwanted losses. If the set val-

ues are exceeded, the winemaker is notified by SMS

or notification on his smartphone.

Our technology will also help protect harvesting or

technical equipment from theft. The gyroscopic sen-

sor senses vibrations from cars that are being driven

through, and the vital information is instantly sent by

alert directly to their phones. There is also the ap-

propriate deployment of motion sensors. Thanks to

them, the lights in the respective part of the vineyard

can be switched on to warn unauthorized people that

they are known about.

Measurement of current crop conditionsThe AirIM input module with temperature


state of the quantities in the crops.

2

3

1

4

5

Measurement of soil moisture

Vibration sensor

The AirSEIS shock sensor senses vibra-

tions belonging to cars of unauthorized

persons. An alert is sent when excessive

vibration is detected.

Noise measurement

The AirNOISE sensor measures the ambi-

ent noise level (dB). In case of a sudden in-

crease in noise, it sends information about

the event. For example, when a tractor is

started unlawfully.

1

2

3

4

5The AirIM input module with external

humidity sensor records and sends current

status information, at a depth of 25 to 30

cm below ground.

Weather stationAirMETEO

Weather station

• reads the status of the environmen-tal conditions directly in the vine-yard

• Measured quantities are speed (m/s) and wind direction, temperature (°C), relative humidity (%), UV radia-tion, sunshine (lx) and precipitation (mm)

• Information can be sent to ELKO Cloud at a set time interval, e.g. every hour

18 19

Forests, meadows and pastures

Extensive meadows, pastures and forest stand full of

trees, wildlife, and often the field or forest nurseries,

place tremendous demands and require the proper

care. Watching hundreds of hectares and taking care

of everything that‘s happening to them is a superhu-

man task. Not in the 21st century in the world of smart

technology. Forests, meadows and pastures can be

guarded, protected, and cared for by iNELS Air detec-

tors. Fires, movement of people and animals, air quality,

and the theft of hay, logs or technical equipment. All

this and much more can be monitored by a combina-

tion of remote access detectors.

In the pastures and paddocks, it saves the time and

work, with automatic water replenishment or the re-

mote opening of a gate or door. An break in the fence

is detected immediately, not by an on-the-spot check.

A locator pinned to halters or collars will help to trap

the stolen or escaped animals. The driveways and

commodities themselves can be watched through the

camera system, motion detectors and gyro sensors. In

case of any unusual situation, a signal is sent, which

informs the owner directly via mobile phone through

the ELKO Cloud. For example, if we calculate the cost

of a gyroscope sensor against the price of a stolen log,

the investment definitely pays off.

Detection of open gates and entrancesThe AirMD-100 outdoor magnetic detector

is used to detect open doors or gates where

there is a risk of intrusion of unauthorized

persons or the escape of livestock.

Vibration sensorThe AirSEIS shock sensor senses vibrations



detected.

Location of animalsThe AirGPS located on a halter or collar

monitors animal movement and sends data

to the ELKO Cloud.The AirIM input module with a current relay

or a current transformer is used to detect

faults (reduced eff ectiveness due to over-

hanging branches, grasses growing through

or breaks) in the electric fence.

Identify the interruptions in fences

21

7

6

3

45

2

4

5

6

7

Gyroscopic detectorAirGYRO

1

3The trap holds the vermin and the AirIM in-

put module alerts the farmer to its capture.

Security against intruders

Automatic dispensing of feed and fl uidsThe Air-11 switch actuator switches the

feed or fl uid dispenser on/off at set times.

1

2

7

• The gyro sensor responds to posi-tion change, the information is instantly sent to the server

• Farmers are instantly notifi ed by a smart phone or SMS message that logs are being handled, so they can intervene against thieves in a timely manner

Securing stored wood

1

20 21

Poultry and hatchery

Meat and eggs are inherent among basic food and raw

materials for further processing. Honest breeders are

trying to maintain maximum quality of the entire pro-

cess from hatching through fattening up to the daily

care of the difficult conditions favourable for breeding.

Whether its chickens, geese, ducks, turkeys, or less

traditional species like quails and pheasants, it‘s always

necessary to ensure that poultry is provided with the

ideal conditions for healthy growth.

For example, with hatching, temperature is a key factor

that has to be stable at all times. At the time of hatch-

ing, an excess of harmful gases escapes from the eggs,

which can endanger the life of the hatching chickens.

Therefore, it is necessary to monitor the air quality,

to regulate ventilation and to intervene immediately

when dangerous levels are detected.

For poultry breeding, it is also necessary to provide

suitable light conditions, imitating daylight, not only

in terms of its colour spectrum, but also in the length

and intensity of the light. In seasons with a shorter

daylight time, it is necessary to artificially ensure the

extension of the light in the halls and its regulation,

imitating the onset of daylight and twilight.

For the successful growth of poultry, it is necessary to

maintain all the mentioned quantities in pre-set values.

Intrusion DetectionThe AirMD-100 indoor magnetic detector

is used to detect open gates, doors and

windows where there is a risk of intrusion

of unauthorized persons or the escape of

livestock.



be automatically opened or notifi cations

sent to the breeder.

Measurement of the actual conditions The AirIM input module with temperature


state of the quantities in the hall and en-

sures ideal breeding conditions.

The Air-11 switch actuator switches the

feed dispenser on/off at set times.

Smoke DetectorThe AirSD smoke detector alerts for the

presence of smoke in the hall and the

farmer is immediately notifi ed.

Automatic dispensing of feed

Twilight sensor + Automat with dimmingAirSOU + DIM-2

Timed illumination1

2

2

11

3

3

4 5

6

4

6

5

• Detects the current outdoor lighting intensity and controls the intensity of indoor artifi cial lighting

• Simulate day and night to modulate the biorhythms of laying hens

22 23

The mass of a hive provides beekeepers with impor-

tant information on the condition of the colony, and

of course the size of the colony. But getting them us-

ing a mechanical beehive scale is almost unrealistic.

Convenient and efficient solutions are offered by smart

technology.

An electronic scale is permanently stationed directly

under the hive. The sensor reads the weight and am-

bient temperature at regular intervals and sends the

data to the ELKO Cloud. The beekeeper can display

the current data, history, or convert it to clear graphs.

The data gathered informs the beekeeper of the stock,

through the feeding season, hibernation, or any ex-

traordinary situation. Thanks to this information, the

beekeeper can not only plan activities throughout the

year, but also intervene in a timely manner in emer-

gency situations of which he is informed on his mobile

phone.

The overall picture of the colony is complemented by

data from meteorological stations located near the

apiary.

Beehives

Electronic weighing scaleAirBEE

Weight sensing of

hives

Weather station

Protection against rodentsThe AirRAT motion detector, based in the

rodent bait box, monitors their activity.

Anti-theft securityThe AirMD indoor motion detector sends

alerts about the movement of people or

animals the closed space of the apiary.

4

2

11

5

6

The AirMETEO weather station detects

wind speed, wind direction, temperature,

humidity, or light level directly at the api-

ary.

1

The closed mobile apiary can be monitored

by the AirNOISE noise sensor, which reports

the engine sound of any connected vehicle.

The AirSEIS shock sensor senses vibrations



detected.

5 Noise measurement

6 Vibration sensor

2

3

4

3

• The electronic weight scales, lo-cated permanently under the hive, senses the weight at specifi ed time intervals

• Data is stored in the ELKO Cloud and can be conveniently viewed by the beekeeper on a computer or in the application on his smartphone 7

The AirGYRO gyroscopic sensor warns

beekeeper in case of unauthorized ma-

nipulation with loose hives.

7 Anti-theft security

24 25

Smart technologies are usable to maintain the right

conditions for longer storage of products. Sensors

inserted into the crop piles of the farmer‘s crop will

alert the farmer to the conditions present that are con-

ducive to the formation and spread of rot and mould.

They can also check the status of the conditions and

the level of filling of containers that cannot be seen.

The grain preservation in the silos is ensured by the

CO2 produced, if there is not enough, the air quality

sensor will warn of the shortage. There is a high risk

of fire in the storage areas, so it is highly desirable to

provide them with smoke detectors.

The monitoring relay monitors the state of machines

such as grain silos and conveyors, cleaners, dryers,

fans, and other devices, and detects their critical and

emergency conditions. Universal sensors monitor the

current status of the passage of current or voltage

and draws attention to any fluctuations.

Silos, granaries, warehouses, barns



open automatically. Conversely, in areas

requiring the presence of CO2, it will alert

the farmer if its status is low.

Device status monitoringThe AirIM input module, in conjunction




conditions.

Measurement of the actual conditionsThe AirIM input module records the cur-

rent status of the variables (temperature

and humidity) in the product storage area.

Fills ultrasonic sensorAreas requiring special conditions, such

as silos, can be equipped with the AirWS

ultrasonic sensor that reports the density

of the bulk or liquid.

Smoke DetectorThe AirSD smoke detector detects that

there is a source of smoke in the room and

sends a notifi cation.

Protection against

rodents

1

1

Rodent trapAirRAT

1

2

2

2

2

2

3

4

5

6

3

43

3

5

5

5

5

5

2

4

4

• Motion detector located bait box monitors their activity

• In this way it informs about their presence and calls for intervention

• A trap can also serve to physically eliminate rodents

6

1

26 27

NL-100FP-1

Switching actuator

AirSA-11L, AirSA-11NB

• The switch actuator can be used to remotely switch appliances

• The actuator is equipped with a relay with a switching contact, which enables to switch high current loads up to 16A

• Continuous power supply 110 - 230V AC• Enhanced IP65 protection (dust and

splash protection)

Twilight sensor

AirSOU-100S, AirSOU-100L, AirSOU-100NB

Module for control of lighting

AirSLC-100L/DALI, Air SLC-100NB/DALI

• Allows you to capture the current lighting intensity and to control the intensity of artifi cial lighting thanks to this information, thereby reducing power consumption

• Battery power• Enhanced IP65 protection (dust and

splash protection)

• Lighting switching and control• DALI communication with ballast is used

to control light intensity (alternatively 0-10V)

• Continuous power supply 110 - 230V AC• Enhanced IP65 protection (dust and

splash protection)

Switches

Measurement of energy consumption Liquid detection

Outdoor motion detector

AirMD-101L, AirMD-101NB

Indoor motion detector

AirMD-100S, AirMD-100L, AirMD-100NB

• detects the movement of people, machines or animals in the monitored area

• Adjustable detector sensitivity• Battery power• Enhanced IP65 protection (dust and

splash protection)

• detects people moving in a supervised area

• Adjustable detector sensitivity• Battery power

Outdoor Lighting Control Module

DALI: AirSLC-100L/LWES/DALIAirSLC-100NB/LWES/DALIAirSLC-100L/NEMA/DALIAirSLC-100NB/NEMA/DALI

• Designed to measure light intensity• DALI or 0-10V communication is used for intensity control• Internal illumination sensor, range 5 - 100,000 Lx• Internal temperature sensor in the range -30 ... 70 ° C• Protection IP66, UV resistant• Power type LUMAWISE ENDURANCE S. (LWES) or NEMA SOCKET (NEMA)

Lighting control

0-10V: AirSLC-100L/LWES/0-10V AirSLC-100NB/LWES/0-10V AirSLC-100L/NEMA/0-10V AirSLC-100NB/NEMA/0-10V

Indoor magnetic detector

AirWD-100S, AirWD-100L, AirWD-100NB

• Primarily designed to detect opening / closing windows, doors or gates

• Activation occurs by removing the magnet from the sensor


• Battery power

Outdoor magnetic detector

AirWD-101S, AirWD-101L, AirWD-101NB

• Primarily designed to detect opening / closing windows, doors or gates


• Status change information is sent to server


splash protection)

Gyroscopic detector

AirGYRO-100L, AirGYRO-100NB

• responds to changing its location• sends a message to the server when it is

detected• Battery power• Enhanced IP65 protection (dust and splash

protection)

Vibration sensor

AirSEIS-100L, AirSEIS-100NB

• senses the vibration from its surroundings and thereby detects movement of vehicles, persons or animals

• při detekci odešle zprávu na server• Battery power• Enhanced IP65 protection (dust and

splash protection)

Rodent trap

AirRAT-100S, AirRAT-100L, AirRAT-100NB

• The motion detector located in the rodent bait box monitors their activity

• In this way it informs about their presence and calls for action

• Battery power

Motion detection

LWESNEMA

Pulse transmitter

AirTM-100S, AirTM-100L, AirTM-100NB

• Wireless pulse transducer designed for sensing pulses from energy meters (electricity meters, gas meters, water meters)

• Information about pulse counts (consumption) is sent to the server


splash protection)

LED sensor

LS

• Senses pulses from gauges that use LED fl ashes for indication

• The sensor is placed outside the meter by fi xing it to the appropriate location

Magnetic sensor

MS/WS

• detects the magnetic pulses that are generated by turning the indicator on / off of the gauge dial

• The sensor is placed outside the meter by fi xing it to the appropriate location

Accessories for AirTM

Flood detector

AirSF-100S, AirSF-100L, AirSF-100NB

• the activation occurs after fl ooding the bottom contacts on the detector

• Battery power• Enhanced IP68 protection

Accessories for AirIM

• FP-1 – Flood probe• NL-100 – Plastic fl oat sensor

Universal input

AirIM-100S, AirIM-100L, AirIM-100NB

• Used to measure temperatures, humidity, voltage, current, voltage according to the sensor used

• Battery power / Permanent power supply 5-12 V DC

• Enhanced IP65 protection (dust and splash protection)

Probes

FP-1, NL-100

door m

28 29

Fills ultrasonic sensor

AirWS-100S, AirWS-100L, AirWS-100NB

• Informs about the fi lling level of the container, storage tank or garbage cans

• Resistance to dirt, dust, moisture and fogging

• Battery power• Protection IP65 is suitable for installation

in demanding environments

Input module

AirIM-100S, AirIM-100L, AirIM-100NB, AirIM-100S/M, AirIM-100L/M

Relevant monitoring relay

• In conjunction with the relevant monitoring relay, monitors the current status of the appliances and detects critical and emergency states

• 24-240 V AC power supply in the cabinet design, or IP65 battery power

• In 1-MODULE design, rack-mount or IP65 enclosure for outdoor use

Fill level detection

Measurement of temperature, humidity and meteorological conditions

Weather station

AirMETEO

• Provides information on speed (km/h): 0 ... 180 km/h and wind direction, temperature (°C): -30 °C ... 65°C, relative air humidity (%): 1 ... 99 % (± 5 %), UV radiation, sunshine (lx): 0 ... 400 kLux, ± 15%, and precipitation (mm): 0 ... 9999 mm

• Battery power• network Lora, NarrowBand


Temperature sensor

TC

• The sensor is made from a NTC thermistor with a PVC end

• Temperature range 0 ... + 70 ° C• Length 100 mm• Weight 5 g

Noise sensor

AirNOISE

• measures the ambient noise level (dB)• dynamic range is from below 27�dBA to

145�dB• frequency range extends from 10�Hz

to�12 kHz• light surface microphone for general

purpose measurements on planar and curved surfaces

Air quality sensor - CO2

AirQS-100S, AirQS-100L,

AirQS-100NB

• Measurement of CO2

• Automatic testing of functionality• Continuous power supply 12-240 V AC /

DC• Sensitivity 300 ... 5000 ppm,

accuracy 5 % (0 ... 180 ppm)• Dimension 120 mm × 36 mm• Weight 185 g

Air quality sensor - CO

AirQS-101S, AirQS-101L, AirQS-101NB

Smoke detector

AirSD-100S, AirSD-100L, Air SD-100NB

• Safety device for CO concentration monitoring

• Information about the actual temperature and humidity

• Battery power• Sensitivity 0 ... 10000 ppm,

accuracy 5 % (0 ... 500 ppm)• Dimension 120 mm × 36 mm• Weight 184 g

• Detects smoke, temperature and humidity

• Automatic testing of functionality• Battery power • Dimension 120 mm × 36 mm• Weight 176 g

Air quality Smoke detection

Accessories for AirIM

Temperature sensor

TZ

• The sensor is made of an NTC thermistor, which is embedded in metal end cap by heat-conductive putty

• Temperature range -40 ... +125 ° C• Length 110 mm• Weight 4,5 g

Combined sensor

HTML2500LF

• Measures temperature and humidity• Humidity range 1 ... 99% (± 3%)• Temperature range - 40 ... + 85 ° C• Length 326 mm• Weight 17,5 g

Soil humidity sensor

ECH-20 GS-1

• High accuracy ± 0.03 %• Resistant to environmental and water

penetration • Dimension 89 mm × 18 mm × 7 mm

Input module

AirIM-100S, AirIM-100L, AirIM-100NB,AirIM-100S/M, AirIM-100L/M

• In conjunction with the sensor, it measures the actual temperature, humidity or mediates meteorological data

• 24-240 V AC power supply in the cabinet design, or IP65 battery power

• In 1-MODULE design, rack-mount or IP65 enclosure for outdoor use

• Catalogue sensors and monitoring relays

30 31

Others just resellHOWEVER, WE DEVELOP AND MANUFACTURE PRODUCTS OURSELVES!

on the market

26 yearsISO certifi cation

15 yearsdevelopers

40employees

330

manufacturingspace

2 000 m2

proprietary plastic mods

200SMD lines

2components

per day

1 mil.

products per year

600 000fi nalization

and dispatch

2 000 m2

warehousingspaces

2000printing lasers

2

R&D overall view

Manufacturing hall

Finalization and dispatch

Testing lab

ELKO EP Holding

www.elkoep.com

Published: 01/2019 | 1st editionModifi cations or amendments reserved.

Russia

Spain

Germany

Czech Republic

Poland

Ukraine

Hungary

Slovakia

UAE

India

Saudi Arabia

Vietnam

Baltic

smart agriculture en 2019 view...wide area network (lpwan). this technology is designed to provide...

Documents