sony cdx-gt45u

SERVICE MANUAL

Sony CorporationPublished by Sony Techno Create Corporation

SPECIFICATIONS

US, Canadian, E, Mexican, Argentina, Korean, Indian modelFM/AM COMPACT DISC PLAYER

AEP, Russian, UK modelFM/MW/LW COMPACT DISC PLAYER

Saudi Arabia modelFM/MW/SW COMPACT DISC PLAYER

9-893-214-052012G33-1© 2012.07

US ModelCDX-GT40U/GT40UW

Canadian ModelCDX-GT40U

AEP ModelUK Model

CDX-GT40U/GT44U

E ModelCDX-GT45U

Russian ModelCDX-GT40U/GT42UE/GT47UE

Indian ModelCDX-GT44U

Ver. 1.4 2012.07

• The tuner and CD sections have no adjustments.

AUDIO POWER SPECIFICATIONS(US model)CEA2006 StandardPower Output: 17 Watts RMS 4 at 4 Ohms < 1 % THD + N SN Ratio: 80 dBA(reference: 1 Watt into 4 Ohms)

Model Name Using Similar Mechanism NEWCD Drive Mechanism Type MG-101CA-188Optical Pick-up Name DAX-25A

Tuner sectionFMTuning range: US, CND, AR model: 87.5 – 107.9 MHz AEP, UK, EA model: 87.5 – 108.0 MHz E, MX, KR, IND model: 87.5 – 108.0 MHz (at 50 kHz step) 87.5 – 108.0 MHz (at 100 kHz step) 87.5 – 107.9 MHz (at 200 kHz step) RU model: FM1/FM2: 87.5 – 108.0 MHz (at 50 kHz) FM3: 65 – 74 MHz (at 30 kHz)FM tuning step: E, MX, KR, IND model: 50 kHz/100 kHz/200 kHz switchableAntenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: 25 kHzUsable sensitivity: 8 dBfSelectivity: 75 dB at 400 kHzSignal-to-noise ratio: 80 dB (stereo)Separation: 50 dB at 1 kHzFrequency response: 20 – 15,000 Hz

AM (US, CND, E, MX, AR, KR, IND model)Tuning range: US, CND, AR model: 530 – 1,710 kHz E, MX, KR, IND model: 531 – 1,602 kHz (at 9 kHz step) 530 – 1,710 kHz (at 10 kHz step)AM tuning step: E, MX, KR, IND model: 9 kHz/10 kHz switchableAntenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: US, CND, AR model: 9,115 kHz or 9,125 kHz/5 kHz E, MX, KR, IND model: 9,124.5 kHz or 9,115.5 kHz/4.5 kHz (at 9 kHz step) 9,115 kHz or 9,125 kHz/5 kHz (at 10 kHz step)Sensitivity: 26 V

MW/LW (AEP, RU, UK model)MW (EA model)Tuning range: MW: 531 – 1,602 kHz LW: 153 – 279 kHz (AEP, RU, UK model)Antenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: 9,124.5 kHz or 9,115.5 kHz/4.5 kHzSensitivity: MW: 26 V LW: 45V (AEP, RU, UK model)

SW (EA model)Tuning range: SW1: 2,940 – 7,735 kHz SW2: 9,500 – 18,135 kHz (except for 10,140 – 11,575 kHz)Antenna (aerial) terminal: External antenna (aerial) connectorIntermediate frequency: 9,124.5 kHz or 9,115.5 kHz/4.5 kHzSensitivity: 26 μV – Continued on next page –

CDX-GT40U/GT40UW/GT42UE/GT44U/GT45U/GT47UE

Photo: CDX-GT40U: AEP, UK model

CD player sectionSignal-to-noise ratio: 120 dBFrequency response: 10 – 20,000 HzWow and fl utter: Below measurable limit

USB Player sectionInterface: USB (Full-speed)Maximum current: 1 A

Power amplifi er sectionOutputs: Speaker outputsSpeaker impedance: 4 – 8 ohmsMaximum power output: US, CND, E, EA, MX, AR, KR, IND model: 52 W 4 (at 4 ohms) AEP, RU, UK model: 45 W 4 (at 4 ohms)


2

1. SERVICE NOTE ...................................................... 3

2. GENERAL Connections .................................................................... 8

3. DISASSEMBLY3-1. Sub Panel Assy ............................................................... 133-2. CD Mechanism Block ..................................................... 143-3. Main Board ..................................................................... 143-4. Servo Board .................................................................... 153-5. Chassis (T) Sub Assy ...................................................... 163-6. Roller Arm Assy .............................................................. 163-7. Chassis (OP) Assy ........................................................... 173-8. Chucking Arm Sub Assy ................................................. 173-9. Sled Motor Assy .............................................................. 183-10. Optical Pick-up Section .................................................. 193-11. Optical Pick-up ............................................................... 19

4. DIAGRAMS4-1. Block Diagram - Main Section - ..................................... 214-2. Block Diagram - Display Section - ................................. 224-3. Printed Wiring Board - Main Section (1/2)

(Except Saudi Arabia model) - ........................................ 244-4. Printed Wiring Boards - Main Section (2/2)

(Except Saudi Arabia model) - ........................................ 254-5. Schematic Diagram - Main Section (1/5) - ..................... 264-6. Schematic Diagram - Main Section (2/5) - ..................... 274-7. Schematic Diagram - Main Section (3/5) - ..................... 284-8. Schematic Diagram - Main Section (4/5) - ..................... 294-9. Schematic Diagram - Main Section (5/5) - ..................... 304-10. Printed Wiring Board - Key Section - ............................. 314-11. Schematic Diagram - Key Section - ............................... 32

5. EXPLODED VIEWS5-1. Main Section ................................................................... 435-2. Front Panel Section ......................................................... 445-3. CD Mechanism Section (MG-101CA-188) .................... 45

6. ELECTRICAL PARTS LIST .................................. 46

Note: Refer to SUPPLEMENT-1 for printed wiring board of MAIN board (Saudi Arabia model).

TABLE OF CONTENTS

SAFETY-RELATED COMPONENT WARNING!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ!

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC-TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON-NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

Except US, Canadian model:

This label is located on the bottom of the chassis.

Ver. 1.2

GeneralOutputs: Audio outputs terminal (rear/sub switchable) US, CND, E, EA, MX, AR, KR, IND model: Power antenna (aerial)/Power amplifi er control terminal (REM OUT) AEP, RU, UK model: Power antenna (aerial) relay control terminal Power amplifi er control terminalInputs: Remote controller input terminal Antenna (aerial) input terminal AUX input jack (stereo mini jack) USB signal input connectorPower requirements: 12 V DC car battery (negative ground (earth))Dimensions: Approx. 178 × 50 × 179 mm (7 1/8 × 2 × 7 1/8 in.) (w/h/d)Mounting dimensions: Approx. 182 × 53 × 162 mm (7 1/4 × 2 1/8 × 6 1/2 in.) (w/h/d)Mass: Approx. 1.2 kg (2 lb. 11 oz.)Supplied accessories: Remote commander: RM-X211 (US, CND, E, EA, MX, AR, KR, IND model) Parts for installation and connections (1 set)

Design and specifi cations are subject to changewithout notice.

• Abbreviation AR : Argentina model CND : Canadian model EA : Saudi Arabia model IND : Indian model KR : Korean model MX : Mexican model RU : Russian model

NOTES ON CHIP COMPONENT REPLACEMENT• Never reuse a disconnected chip component.• Notice that the minus side of a tantalum capacitor may be dam-

aged by heat.


3

SECTION 1SERVICE NOTE

NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT

The laser diode in the optical pick-up block may suffer electro-static break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body.During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts.The fl exible board is easily damaged and should be handled with care.

NOTES ON LASER DIODE EMISSION CHECKThe laser beam on this model is concentrated so as to be focused on the disc refl ective surface by the objective lens in the optical pickup block. Therefore, when checking the laser diode emission, observe from more than 30 cm away from the objective lens.

NOTE FOR REPLACEMENT OF THE SERVO BOARDWhen repairing, the complete SERVO board should be replaced since any parts in the SERVO board cannot be repaired.

NOTE FOR REPLACEMENT OF THE SENSOR BOARDWhen the SENSOR board is defective, exchange the MECHANI-CAL BLOCK (Z) ASSY 08 (Former type) or MECHANICAL BLOCK (11CA) ASSY (New type).

Note: As for the mechanism deck (MG-101CA-188) carried in this unit, component parts have been changed from the midway of production. When you perform repair exchange of the mechanism deck (MG-101CA-188), refer to “ABOUT THE MG-101CA-188 OF FORMER AND NEW” on page 6.

CAUTIONUse of controls or adjustments or performance of procedures other than those specifi ed herein may result in hazardous radia-tion exposure.

If the optical pick-up block is defective, please replace the whole optical pick-up block.Never turn the semi-fi xed resistor located at the side of optical pick-up block.

TEST DISCSUse following TEST DISC when this unit confi rms the operation and checks it.

Part No. Description3-702-101-01 DISC (YEDS-18), TEST (for CD)4-225-203-01 DISC (PATD-012), TEST (for CD)

optical pick-up

semi-fixed resistor

UNLEADED SOLDERBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size)

: LEAD FREE MARKUnleaded solder has the following characteristics.• Unleaded solder melts at a temperature about 40 °C higher

than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be

applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to

about 350 °C.Caution: The printed pattern (copper foil) may peel away if

the heated tip is applied for too long, so be careful!• Strong viscosity Unleaded solder is more viscous (sticky, less prone to fl ow)

than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc.

• Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may

also be added to ordinary solder.

Ver. 1.4


4

EXTENSION CABLE AND SERVICE POSITIONWhen repairing or servicing this set, connect the jig (extension cable) as shown below.

• Connect the MAIN board (CN700) and the SERVO board (CN401) with the jig cable.

Jig cable:Part No. DescriptionA-1818-424-A EXTENSION CABLE (CD MECHA)

NOTE FOR REPLACEMENT OF THE USB CONNECTOR (CN902) AND THE AUX JACK (J901)To replace the USB connector and the AUX jack requires align-ment.1. Insert the USB connector and the AUX jack into the front pan-

el.2. Place the KEY board on the front panel and align the terminals

of the USB connector and the AUX jack with the holes in the KEY board.

3. Solder the seven terminals of the connector and three terminals of the jack.

SERVO board(CN401)

MAIN board(CN700) extension cable (CD mecha)

KEY board

front panel

USB (socket) connectorAUX jack

CLEANING THE CONNECTORSThe unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, detach the front panel and clean the connectors with a cotton swab. Do not apply too much force. Otherwise, the connectors may be damaged.

Notes

For safety, turn off the ignition before cleaning the connectors, and remove the key from the ignition switch.

Never touch the connectors directly with your fingers or with any metal device.


5

NOTE THE MAIN BOARD OR SYSTEM CONTROLLER (IC501) REPLACINGWhen the MAIN board or system controller (IC501) is replaced, the destination setting is necessary.

1. Destination SettingSet destination according to the procedure below.

1-1. Setting the Destination Code1. In the state of source off (the clock is displayed), enter the test

mode by pressing the buttons in order of the [4] t [5] t [6] (press only the [6] button for two seconds).

2. In the state in which the system controller version is displayed on the liquid crystal display, enter the destination setting mode by pressing the buttons in order of the [SEEK +] t [SEEK –] t [PUSH ENTER/SELECT].

3. Input the alphanumeric character of 6 digits of “F XXXXXX” displayed on the liquid crystal display, and execute the destina-tion setting.

Note: Refer to following “1-3. Entering the Destination Code” for opera-tion method.

4. The resetting operation is executed by pressing the [SOURCE/OFF] button for 1 second after the setting ends, and the unit returns to the normal condition.

1-2. Display in Destination Setting Mode

12 digitsOP0OP2OP1OP3OP4OP5XX XXXXF

1-3. Entering the Destination Code• Method of operation by main unit

1. Rotate the control dial, and select the alphanumeric character of “0 to F”.

2. The digit advances by pressing the [PUSH ENTER/SELECT] or [SEEK +] button.

The digit returns by pressing the [ ] or [SEEK –] button.3. The setting is completed by pressing the [PUSH ENTER/

SELECT] button, and the initialization operation is done.

• Method of operation by remote commander

OFF

PTY DSPL/SCRL

SOUNDSOURCE MODE

2

5

AT T

VO L+

–

+

–

MENU

ENTER

PA US E

1. Press the [ ] or [ ] button, and select the alphanumeric char-acter of “0 to F”.

2. The digit advances by pressing the [ ] button. The digit returns by pressing the [ ] button.3. The setting is completed by pressing the [ENTER] button, and

the initialization operation is done.

1-4. Destination CodeModel Destination OP5 OP4 OP3 OP2 OP1 OP0

CDX-GT40UCDX-GT40UW US, Canadian 0 1 C 3 0 2

CDX-GT40UCDX-GT44U AEP, UK 0 1 C 3 0 1

CDX-GT40UCDX-GT42UECDX-GT47UE

Russian 0 1 E 3 0 7

CDX-GT44UCDX-GT45U

E, Mexican, Korean, Indian

0 1 C B 0 0

CDX-GT45U Saudi Arabia 0 1 C B 0 4CDX-GT45U Argentina 0 1 C B 0 3

2. Confi rmation After Destination SettingExecute the following operation after completing the destination setting, and confi rm a correct destination was set.

Destination setting checking method:1. In the state of source off (the clock is displayed on the liquid

crystal display), enter the test mode by pressing the buttons in order of the [4] t [5] t [6] (press only the [6] button for two seconds).

2. In the state in which the system controller version is displayed on the liquid crystal display, enter the destination setting value display mode by pressing the [DSPL] button.

3. Confi rm the alphanumeric character of 6 digits of “F XXXXXX” displayed in liquid crystal display is an value cor-rectly input.

4. The resetting operation is executed by pressing the [SOURCE/OFF] button for 1 second after the confi rming ends, and the unit returns to the normal condition.

Ver. 1.2


6

ABOUT THE MG-101CA-188 OF FORMER AND NEWAs for the mechanism deck (MG-101CA-188) carried in this unit, component parts have been changed from the midway of production. When you perform repair exchange of the mechanism deck (MG-101CA-188), please be sure to work, after referring to the following fi gure and checking former and new.

• New/Former Discrimination As shown in the following fi gure, please check the SERVO board side of the mechanism deck (MG-101CA-188).

Former type New type

SERVO board (double-sided board)

Flexible board cannot be seen.

SERVO board (one side board)

Flexible board can be seen.

• New/Former Compatibility

Mechanical block assy

Complete SERVO board

MECHANICAL BLOCK ASSY

COMPLETE SERVO BOARD Judgment

New type + New type = OKNew type + Former type = OK

Former type + New type = NGFormer type + Former type = OK

Ver. 1.3


7

Serial numberModel Destination Former type New type

CDX-GT40U

US and Canadian models*

1864691 or smaller

1864692 or lager

Canadian model (for CXS-GT4016F)

1554521 or smaller

1554522 or lager

AEP and UK models

1885791 or smaller

1885792 or lager

Russian model 1822499 or smaller

1822500 or lager

CDX-GT40UW US model 1864116 or

smaller1864117 or lager

CDX-GT42UE Russian model 1850792 or


CDX-GT44U

AEP and UK models

1939738 or smaller

1939739 or lager

Indian model 1865831 or smaller

1865832 or lager

CDX-GT45U

E model 1811434 or smaller

1811435 or lager

Saudi Arabia model 1878981 or smaller

1878982 or lager

Mexican model 1838226 or smaller

1838227 or lager

Argentina model 1798061 or smaller

1798062 or lager

Korean model 1826514 or smaller

1826515 or lager



*CXS-GT4016F (US model) is Former type only.

ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARDIn this set, the LCD driver IC (IC901) on the KEY board has been changed in the midway of production.The following changes are performed by this change.

• Change of the KEY board (suffi x-21/-22) (Refer to supplement-2)

• Change of part No. of the FRONT PANEL OVERALL ASSY (Refer to page 44, 52 and 53)

• Change of part No. of the complete MAIN board (Refer to page 43 and 48)

• Change of part for Ref No. IC501 on the MAIN board (Refer to page 50)

Since all the above-mentioned change is synchronous change, there is not compatibility of new type/former type in the front panel side and main unit side.Do the work after necessarily referring to following “New/former discrimination”.

Note: When the parts of new front panel and the parts of old main unit are combined, this unit does not operate nor-mally.

New/former discrimination:Three kinds of following distinguish methods exist.

• Distinguish method by serial number printed on the model number label (Refer to right side for the serial number).

Model number label

Displayed characters/values are example.

– Main unit (Bottom side) –

• Distinguish method by part No. printed on the KEY board

Former type : 1-884-821-11New type : 1-884-821-21 or 1-884-821-22

– KEY Board (Side A) –

• Distinguish method by LCD driver IC (IC901) on the KEY board

IC901

– KEY Board (Side B) –

Former type : LC75839New type : PT6587-LQ

Ver. 1.3


8

SECTION 2GENERAL This section is extracted

from instruction manual.

CONNECTIONS• CDX-GT40U: US, Canadian model/GT40UW

REAR / SUBAUDIO OUT *2

REMOTEIN*3

*1

REM OUTMax. supply current 0.4 ACourant max. fourni 0,4 A

Fuse (10 A)Fusible (10 A)

Blue/white stripedRayé bleu/blanc

ACC

BATTERY

2

RedRouge

YellowJaune

BlackNoir

WhiteBlanc

GreenVert

PurpleViolet

White/black stripedRayé blanc/noir

Gray/black stripedRayé gris/noir

Green/black stripedRayé vert/noir

GrayGris

LeftGauche

RightDroit

LeftGauche

RightDroit

Purple/black stripedRayé violet/noir

from car antenna (aerial) à partir de l’antenne du véhicule

*1 RCA pin cord (not supplied).*2 AUDIO OUT can be switched SUB or REAR. For

details, see the supplied Operating Instructions.*3 Separate adaptor may be required.

*1 Cordon à broche RCA (non fourni).*2 AUDIO OUT peut être commuté sur SUB ou

REAR. Pour obtenir plus de détails, reportez-vous au mode d’emploi fourni.

*3 L’utilisation d’un adaptateur pourrait être nécessaire.

Notes on the control and power supply leadsREM OUT lead (blue/white striped) supplies +12 V DC when you turn on the unit.When your car has built-in FM/AM antenna (aerial) in the rear/side glass, connect REM OUT lead (blue/white striped) or the accessory power supply lead (red) to the power terminal of the existing antenna (aerial) booster. For details, consult your dealer.A power antenna (aerial) without a relay box cannot be used with this unit.

Memory hold connectionWhen the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.

Notes on speaker connectionBefore connecting the speakers, turn the unit off.Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid its damage.Do not connect the speaker terminals to the car chassis, or connect the terminals of the right speakers with those of the left speaker.Do not connect the ground (earth) lead of this unit to the negative (–) terminal of the speaker.Do not attempt to connect the speakers in parallel.Connect only passive speakers. Connecting active speakers (with built-in amplifiers) to the speaker terminals may damage the unit.To avoid a malfunction, do not use the built-in speaker leads installed in your car if the unit shares a common negative (–) lead for the right and left speakers.Do not connect the unit’s speaker leads to each other.

Note on connectionIf speaker and amplifier are not connected correctly, “FAILURE” appears in the display. In this case, make sure the speaker and amplifier are connected correctly.

Connection diagram 1 To a metal surface of the car

First connect the black ground (earth) lead, then connect the yellow and red power supply leads.

2 To the power antenna (aerial) control lead or power supply lead of antenna (aerial) boosterNotes

It is not necessary to connect this lead if there is no power antenna (aerial) or antenna (aerial) booster, or with a manually-operated telescopic antenna (aerial).When your car has a built-in FM/AM antenna (aerial) in the rear/side glass, see “Notes on the control and power supply leads.”

To AMP REMOTE IN of an optional power amplifierThis connection is only for amplifiers. Connecting any other system may damage the unit.

3 To the +12 V power terminal which is energized in the accessory position of the ignition switchNotes

If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to connect the black ground (earth) lead to a metal surface of the car first.When your car has a built-in FM/AM antenna (aerial) in the rear/side glass, see “Notes on the control and power supply leads.”

4 To the +12 V power terminal which is energized at all timesBe sure to connect the black ground (earth) lead to a metal surface of the car first.

Schéma de raccordement 1 À un point métallique de la voiture

Branchez d’abord le câble de mise à la masse noir et, ensuite, les câbles d’alimentation jaune et rouge.

2 Au câble de commande d’antenne électrique ou au câble d’alimentation de l’amplificateur d’antenneRemarques

Il n’est pas nécessaire de raccorder ce câble s’il n’y a pas d’antenne électrique ni d’amplificateur d’antenne, ou avec une antenne télescopique manuelle.Si votre voiture est équipée d’une antenne FM/AM intégrée dans la vitre arrière/latérale, voir « Remarques sur les câbles de commande et d’alimentation ».

Au niveau de AMP REMOTE IN de l’amplificateur de puissance en optionCe raccordement s’applique uniquement aux amplificateurs. Le branchement de tout autre système risque d’endommager l’appareil.

3 À la borne d’alimentation +12 V qui est alimentée quand la clé de contact est sur la position accessoiresRemarques

S’il n’y a pas de position accessoires, raccordez la borne d’alimentation (batterie) +12 V qui est alimentée en permanence. Raccordez d’abord le câble de mise à la masse noir à un point métallique du véhicule.Si votre voiture est équipée d’une antenne FM/AM intégrée dans la vitre arrière/latérale, voir « Remarques sur les câbles de commande et d’alimentation ».

4 À la borne d’alimentation +12 V qui est alimentée en permanenceRaccordez d’abord le câble de mise à la masse noir à un point métallique du véhicule.

Remarques sur les câbles de commande et d’alimentationLe câble REM OUT (rayé bleu/blanc) fournit une alimentation de +12 V CC lorsque vous mettez l’appareil en marche.Lorsque votre voiture est équipée d’une antenne FM/AM intégrée dans la vitre arrière/latérale, raccordez le câble REM OUT (rayé bleu/blanc) ou le câble d’alimentation des accessoires (rouge) à la borne d’alimentation de l’amplificateur d’antenne existant. Pour plus de détails, consultez votre détaillant.Une antenne électrique sans boîtier de relais ne peut pas être utilisée avec cet appareil.

Raccordement pour la conservation de la mémoireLorsque le câble d’alimentation jaune est raccordé, le circuit de la mémoire est alimenté en permanence même si la clé de contact est sur la position d’arrêt.

Remarques sur le raccordement des haut-parleursAvant de raccorder les haut-parleurs, éteignez l'appareil.Utilisez des haut-parleurs ayant une impédance de 4 à 8 ohms avec une capacité électrique adéquate pour éviter de les endommager.Ne raccordez pas les bornes du système de haut-parleurs au châssis de la voiture et ne raccordez pas les bornes du haut-parleur droit à celles du haut-parleur gauche.Ne raccordez pas le câble de mise à la masse de cet appareil à la borne négative (–) du haut-parleur.N’essayez pas de raccorder les haut-parleurs en parallèle.Raccordez uniquement des haut-parleurs passifs. Le raccordement de haut-parleurs actifs (avec amplificateurs intégrés) aux bornes des haut-parleurs peut endommager l’appareil.Pour éviter tout problème de fonctionnement, n’utilisez pas les câbles des haut-parleurs intégrés installés dans votre voiture si l’appareil possède un câble négatif commun (–) pour les haut-parleurs droit et gauche.Ne raccordez pas entre eux les cordons des haut-parleurs de l’appareil.

Remarque sur le raccordementSi le haut-parleur et l’amplificateur ne sont pas raccordés correctement, le message « FAILURE » s’affiche. Dans ce cas, assurez-vous que les haut-parleurs et l’amplificateur sont bien raccordés.


9

REMOTEIN*4


Positions 1, 2, 3, and 6 do not have pins.An Position 1, 2, 3 und 6 befinden sich keine Stifte.Les positions 1, 2, 3 et 6 ne comportent pas de broches.Le posizioni 1, 2, 3 e 6 non hanno piedini.De posities 1, 2, 3 en 6 hebben geen pins.

4

YellowGelbJauneGialloGeel

continuous power supplypermanente Stromversorgung

alimentation continuealimentazione continua

continu voeding

7

RedRot

RougeRossoRood

switched power supplygeschaltete Stromversorgung

alimentation commutéealimentazione commutata

geschakelde voeding

5

BlueBlauBleuBlu

Blauw

power antenna (aerial) controlMotorantennensteuerung

commande d'antenne électriquecomando dell’antenna elettrica

elektrische antenne

8

BlackSchwarz

NoirNeroZwart

ground (earth)Massemasseterra

aarding

Negative polarity positions 2, 4, 6, and 8 have striped leads.An den negativ gepolten Positionen 2, 4, 6 und 8 befinden sich gestreifte Adern.Les positions de polarité négative 2, 4, 6 et 8 sont dotées de cordons rayés.Le posizioni a polarità negativa 2, 4, 6 e 8 hanno cavi rigati.De posities voor negatieve polariteit (2, 4, 6 en 8) hebben gestreepte kabels.

1PurpleViolettVioletViolaPaars

+

Speaker, Rear, RightLautsprecher hinten rechtsHaut-parleur, arrière, droit

Diffusore, posteriore, destroLuidspreker, achter, rechts

5WhiteWeißBlanc

BiancoWit

+

Speaker, Front, LeftLautsprecher vorne links

Haut-parleur, avant, gaucheDiffusore, anteriore, sinistro

Luidspreker, voor, links

2 –

Speaker, Rear, RightLautsprecher hinten rechtsHaut-parleur, arrière, droit

Diffusore, posteriore, destroLuidspreker, achter, rechts

6 –

Speaker, Front, LeftLautsprecher vorne links

Haut-parleur, avant, gaucheDiffusore, anteriore, sinistro

Luidspreker, voor, links

3GrayGrauGris

GrigioGrijs

+

Speaker, Front, RightLautsprecher vorne rechtsHaut-parleur, avant, droit

Diffusore, anteriore, destroLuidspreker, voor, rechts

7GreenGrünVert

VerdeGroen

+

Speaker, Rear, LeftLautsprecher hinten links

Haut-parleur, arrière, gaucheDiffusore, posteriore, sinistro

Luidspreker, achter, links

4 –

Speaker, Front, RightLautsprecher vorne rechtsHaut-parleur, avant, droit

Diffusore, anteriore, destroLuidspreker, voor, rechts

8 –

Speaker, Rear, LeftLautsprecher hinten links

Haut-parleur, arrière, gaucheDiffusore, posteriore, sinistro

Luidspreker, achter, links

2

Fuse (10 A)Sicherung (10 A)Fusible (10 A)Fusibile (10 A)Zekering (10 A)

3

from the car’s power connectorvom Stromanschluss des Fahrzeugsdu connecteur d’alimentation de la voituredal connettore di alimentazione dell’autovan de autovoedingsaansluiting

See “Power connection diagram” on the reverse side for details.Näheres dazu finden Sie im „Stromanschlussdiagramm“. Blättern Sie dazu bitte um.Voir le «Schéma de raccordement d’alimentation » au verso pour plus de détails.Per ulteriori informazioni, vedere “Diagramma dei collegamenti di alimentazione” che si trova sul retro.Zie "Voedingsaansluitschema" op de achterkant voor meer details.

from the car’s speaker connectorvom Lautsprecheranschluss des Fahrzeugsdu connecteur de haut-parleur de la voituredal connettore dei diffusori dell’autovan de autoluidsprekeraansluiting

*1 from car antenna (aerial)von Autoantennede l’antenne de la voituredall’antenna dell’autovan een auto-antenne

*2

*1 Note for the antenna (aerial) connecting If your car antenna (aerial) is an ISO (International Organization for Standardization) type, use the supplied adaptor 2 to connect it. First connect the car antenna (aerial) to the supplied adaptor, then connect it to the antenna (aerial) jack of the master unit.

*2 RCA pin cord (not supplied).*3 AUDIO OUT can be switched SUB or REAR. For

details, see the supplied Operating Instructions.*4 Separate adaptor may be required.

*1 Hinweis zum Anschließen der Antenne Wenn Ihre Autoantenne der ISO -Norm (Internationale Normungsgemeinschaft) entspricht, schließen Sie sie mithilfe des mitgelieferten Adapters 2 an. Verbinden Sie zuerst die Autoantenne mit dem mitgelieferten Adapter und verbinden Sie diesen dann mit der Antennenbuchse des Hauptgeräts.

*2 Cinchkabel (nicht mitgeliefert).*3 AUDIO OUT kann zwischen SUB und REAR

umgeschaltet werden. Näheres hierzu finden Sie in der mitgelieferten Bedienungsanleitung.

*4 Möglicherweise ist ein separater Adapter erforderlich.

*1 Remarque sur le raccordement de l’antenne Si votre antenne de voiture est de type ISO (Organisation internationale de normalisation), utilisez l’adaptateur fourni 2 pour la raccorder. Raccordez d’abord l’antenne de voiture à l’adaptateur fourni et, ensuite, à la prise d’antenne de l’appareil principal.

*2 Cordon à broche RCA (non fourni).*3 AUDIO OUT peut être commuté sur SUB ou REAR.

Pour obtenir plus de détails, reportez-vous au mode d’emploi.

*4 Un adaptateur séparé peut être nécessaire.

*1 Nota per il collegamento dell’antenna Se l’antenna dell’auto è di tipo ISO (International Organization for Standardization), utilizzare l’adattatore 2 in dotazione per collegarla. Collegare prima l’antenna della macchina all’adattatore in dotazione, quindi collegarla alla presa dell’antenna dell’apparecchio principale.

*2 Cavo a piedini RCA (non in dotazione).*3 AUDIO OUT può essere impostato su SUB o su

REAR. Per ulteriori informazioni, consultare il manuale di istruzioni per l’uso in dotazione.

*4 Potrebbe essere necessario un adattatore separato.

*1 Opmerking bij de antenne-aansluiting Indien uw auto is uitgerust met een antenne van het type ISO (International Organization for Standardization), moet u die aansluiten met behulp van de bijgeleverde adapter 2. Sluit eerst de auto-antenne aan op de bijgeleverde adapter en vervolgens de antennestekker op het hoofdtoestel.

*2 Tulpstekkersnoer (niet bijgeleverd).*3 AUDIO OUT kan worden ingesteld op SUB of REAR.

Raadpleeg de gebruiksaanwijzing voor meer informatie.

*4 Er is mogelijk een afzonderlijke adapter vereist.

AMP REM

Blue/white stripedBlauweiß gestreiftRayé bleu/blancRigato blu e biancoBlauw/wit gestreept

Max. supply current 0.3 Amax. Versorgungsstrom 0,3 ACourant d’alimentation maximum 0,3 AAlimentazione massima fornita 0,3 AMax. voedingsstroom 0,3 A

Aansluitschema A Naar AMP REMOTE IN van een optionele

eindversterkerDeze aansluiting is alleen bedoeld voor versterkers. Door een ander systeem aan te sluiten kan het apparaat worden beschadigd.

WaarschuwingIndien u een elektrische antenne hebt zonder relaiskast, kan het aansluiten van dit apparaat met de bijgeleverde voedingskabel 3 de antenne beschadigen.Opmerkingen over de bedienings- en voedingskabels

De bedieningskabel voor de elektrische antenne (blauw) levert +12 V gelijkstroom wanneer u de tuner inschakelt of de functie AF (Alternative Frequency) of TA (Traffic Announcement) activeert.Wanneer uw auto is uitgerust met een FM/MW/LW-antenne in de achterruit/zijruit, moet u de bedieningskabel voor de elektrische antenne (blauw) of de hulpvoedingskabel (rood) aansluiten op de voedingsingang van de bestaande antenneversterker. Raadpleeg uw dealer voor meer details.Met dit apparaat is het niet mogelijk een elektrische antenne zonder relaiskast te gebruiken.

Instandhouden van het geheugenZolang de gele voedingskabel is aangesloten, blijft de stroomvoorziening van het geheugen intact, ook wanneer het contact van de auto wordt uitgeschakeld.

Opmerkingen betreffende het aansluiten van de luidsprekersZorg dat het apparaat is uitgeschakeld, alvorens de luidsprekers aan te sluiten.Gebruik luidsprekers met een impedantie van 4 tot 8 ohm en let op dat die het vermogen van de versterker kunnen verwerken. Als u dit niet doet, kunnen de luidsprekers ernstig beschadigd raken.Verbind in geen geval de aansluitingen van de luidsprekers met het chassis van de auto en sluit de aansluitingen van de rechter- en linkerluidspreker niet op elkaar aan.Verbind de aarddraad van dit apparaat niet met de negatieve (–) aansluiting van de luidspreker.Probeer nooit de luidsprekers parallel aan te sluiten.Sluit geen actieve luidsprekers (met ingebouwde versterkers) aan op de luidsprekeraansluiting van dit apparaat. Dit zal leiden tot beschadiging van de actieve luidsprekers. Sluit dus altijd uitsluitend luidsprekers zonder ingebouwde versterker aan.Om defecten te vermijden mag u de bestaande luidsprekerbedrading in uw auto niet gebruiken wanneer er een gemeenschappelijke negatieve (–) draad is voor de rechter- en linkerluidsprekers.Verbind de luidsprekerdraden niet met elkaar.

Opmerking over aansluitenAls de luidspreker en versterker niet correct zijn aangesloten, wordt "FAILURE" in het display weergegeven. In dit geval moet u zorgen dat de luidspreker en versterker correct zijn aangesloten.

Schéma de raccordement A Vers la prise AMP REMOTE IN d’un amplificateur

de puissance facultatifCe raccordement existe seulement pour les amplificateurs. Le raccordement à tout autre système peut endommager l’appareil.

AvertissementSi vous disposez d’une antenne électrique sans boîtier de relais, le branchement de cet appareil au moyen du cordon d’alimentation fourni 3 risque d’endommager l’antenne.Remarques sur les câbles de commande et d’alimentation

Le câble de commande d’antenne électrique (bleu) fournit du courant continu de +12 V lorsque vous mettez le tuner sous tension ou lorsque vous activez la fonction AF (fréquence alternative) ou TA (informations de circulation).Lorsque votre voiture est équipée d’une antenne FM/MW (PO)/LW (GO) intégrée dans la vitre arrière/latérale, raccordez le câble de commande d’antenne électrique (bleu) ou le câble d’alimentation des accessoires (rouge) à la borne d'alimentation de l’amplificateur d’antenne existant. Pour plus de détails, consultez votre revendeur.Une antenne électrique sans boîtier de relais ne peut pas être utilisée avec cet appareil.

Raccordement pour la conservation de la mémoireLorsque le câble d’alimentation jaune est raccordé, le circuit de la mémoire est alimenté en permanence même si la clé de contact est en position d’arrêt.

Remarques sur le raccordement des haut-parleursAvant de raccorder les haut-parleurs, mettre l’appareil hors tension.Utiliser des haut-parleurs ayant une impédance de 4 à 8 ohms et une capacité adéquate sous peine de les endommager.Ne pas raccorder les bornes du système de haut-parleurs au châssis de la voiture et ne pas connecter les bornes des haut-parleurs droit à celles des haut-parleurs gauche.Ne pas raccorder le câble de mise à la masse de cet appareil à la borne négative (–) du haut-parleur.Ne pas tenter de raccorder les haut-parleurs en parallèle.Connecter uniquement des haut -parleurs passifs. La connexion de haut -parleurs actifs (avec des amplificateurs intégrés) aux bornes des haut -parleurs pourrait endommager l’appareil.Pour éviter tout problème de fonctionnement, n’utilisez pas les câbles des haut-parleurs intégrés (–) installés dans votre voiture si l’appareil dispose d’un câble négatif commun pour les haut-parleurs droit et gauche.Ne raccordez pas entre eux les cordons des haut-parleurs de l’appareil.

Remarque sur le raccordementSi les haut-parleurs et l’amplificateur ne sont pas raccordés correctement, le message «FAILURE» s’affiche. Dans ce cas, assurez-vous que les haut-parleurs et l’amplificateur sont raccordés correctement.

Anschlussdiagramm A An AMP REMOTE IN des gesondert erhältlichen

EndverstärkersDieser Anschluss ist ausschließlich für Verstärker gedacht. Schließen Sie nichts anderes daran an. Andernfalls kann das Gerät beschädigt werden.

WarnungWenn Sie eine Motorantenne ohne Relaiskästchen verwenden, kann durch Anschließen dieses Geräts mit dem mitgelieferten Stromversorgungskabel 3 die Antenne beschädigt werden.Hinweise zu den Steuer- und Stromversorgungsleitungen

Die Motorantennen-Steuerleitung (blau) liefert +12 V Gleichstrom, wenn Sie den Tuner einschalten oder die AF- (Alternativfrequenzsuche) oder die TA-Funktion (Verkehrsdurchsagen) aktivieren.Wenn das Fahrzeug mit einer in der Heck-/Seitenfensterscheibe integrierten FM (UKW)/MW/LW-Antenne ausgestattet ist, schließen Sie die Motorantennen-Steuerleitung (blau) oder die Zubehörstromversorgungsleitung (rot) an den Stromversorgungsanschluss des vorhandenen Antennenverstärkers an. Näheres dazu erfahren Sie bei Ihrem Händler.Es kann nur eine Motorantenne mit Relaiskästchen angeschlossen werden.

Stromversorgung des SpeichersWenn die gelbe Stromversorgungsleitung angeschlossen ist, wird der Speicher stets (auch bei ausgeschalteter Zündung) mit Strom versorgt.

Hinweise zum LautsprecheranschlussSchalten Sie das Gerät aus, bevor Sie die Lautsprecher anschließen.Verwenden Sie Lautsprecher mit einer Impedanz zwischen 4 und 8 Ohm und ausreichender Belastbarkeit. Ansonsten können die Lautsprecher beschädigt werden.Verbinden Sie die Lautsprecheranschlüsse nicht mit dem Wagenchassis und verbinden Sie auch nicht die Anschlüsse des rechten mit denen des linken Lautsprechers.Verbinden Sie die Masseleitung dieses Geräts nicht mit dem negativen (–) Lautsprecheranschluss.Versuchen Sie nicht, Lautsprecher parallel anzuschließen.An die Lautsprecheranschlüsse dieses Geräts dürfen nur Passivlautsprecher angeschlossen werden. Schließen Sie keine Aktivlautsprecher (Lautsprecher mit eingebauten Verstärkern) an, da das Gerät sonst beschädigt werden könnte.Um Fehlfunktionen zu vermeiden, verwenden Sie nicht die im Fahrzeug installierten, integrierten Lautsprecherleitungen, wenn am Ende eine gemeinsame negative (–) Leitung für den rechten und den linken Lautsprecher verwendet wird.Verbinden Sie nicht die Lautsprecherkabel des Geräts miteinander.

Hinweis zum AnschließenWenn Lautsprecher und Verstärker nicht richtig angeschlossen sind, erscheint „FAILURE“ im Display. Vergewissern Sie sich in diesem Fall, dass Lautsprecher und Verstärker richtig angeschlossen sind.

Schema di collegamento A A AMP REMOTE IN di un amplificatore di potenza

opzionale Questo collegamento è riservato esclusivamente agli amplificatori. Non collegare un tipo di sistema diverso onde evitare di causare danni all’apparecchio.

AvvertenzaQuando si collega l’apparecchio con il cavo di alimentazione in dotazione 3, si potrebbe danneggiare l’antenna elettrica se questa non dispone di scatola a relè.Note sui cavi di controllo e di alimentazione

Il cavo (blu) di controllo dell’antenna elettrica fornisce alimentazione pari a +12 V CC quando si attiva il sintonizzatore oppure la funzione TA (notiziario sul traffico) o AF (frequenza alternativa).Se l’automobile è dotata di antenna FM/MW/LW incorporata nel vetro posteriore/laterale, collegare il cavo (blu) di controllo dell’antenna elettrica o il cavo (rosso) di ingresso dell’alimentazione accessoria al terminale di alimentazione del preamplificatore dell’antenna esistente. Per ulteriori informazioni, consultare il proprio fornitore.Non è possibile usare un’antenna elettrica senza scatola a relè con questo apparecchio.

Collegamento per la conservazione della memoriaQuando il cavo di ingresso alimentazione giallo è collegato, viene sempre fornita alimentazione al circuito di memoria anche quando l’interruttore di accensione è spento.

Note sul collegamento dei diffusoriPrima di collegare i diffusori spegnere l’apparecchio.Usare diffusori di impedenza compresa tra 4 e 8 ohm e con capacità di potenza adeguata, altrimenti i diffusori potrebbero venire danneggiati.Non collegare i terminali del sistema diffusori al telaio dell’auto e non collegare i terminali del diffusore destro a quelli del diffusore sinistro. Non collegare il cavo di terra di questo apparecchio al terminale negativo (–) del diffusore.Non collegare i diffusori in parallelo.Assicurarsi di collegare soltanto diffusori passivi, poiché il collegamento di diffusori attivi, dotati di amplificatori incorporati, ai terminali dei diffusori potrebbe danneggiare l’apparecchio.Per evitare problemi di funzionamento, non utilizzare i cavi dei diffusori incorporati installati nell’automobile se l’apparecchio condivide un cavo comune negativo (–) per i diffusori destro e sinistro.Non collegare fra loro i cavi dei diffusori dell’apparecchio.

Nota sui collegamentiSe l’amplificatore e il diffusore non sono collegati correttamente, “FAILURE” viene visualizzato nel display. In tal caso, accertarsi che l’amplificatore e il diffusore siano collegati correttamente.

Connection diagram A To AMP REMOTE IN of an optional power

amplifierThis connection is only for amplifiers. Connecting any other system may damage the unit.

WarningIf you have a power antenna (aerial) without a relay box, connecting this unit with the supplied power supply lead 3 may damage the antenna (aerial).Notes on the control and power supply leads

The power antenna (aerial) control lead (blue) supplies +12 V DC when you turn on the tuner, or when you activate the AF (Alternative Frequency) or TA (Traffic Announcement) function.When your car has built-in FM/MW/LW antenna (aerial) in the rear/side glass, connect the power antenna (aerial) control lead (blue) or the accessory power supply lead (red) to the power terminal of the existing antenna (aerial) booster. For details, consult your dealer.A power antenna (aerial) without a relay box cannot be used with this unit.

Memory hold connectionWhen the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.



• CDX-GT40U: AEP, UK model/GT44U: AEP, UK model

Ver. 1.2


10

• CDX-GT40U: Russian model/GT42UE/GT47UE

REMOTEIN*4


AMP REM

(10 A

3

2

“Cx”

*2

*1

1 + 5 +

2 6

3 + 7 +

4 8

4 7

5 8

*

S

2

* RC

* AS R AR

*

*

S

2

* RCA

* A SR AR

*

A Oc

yy

3

( T

E yL

(y

y

E yLURE

y

A O

3

( t vT (T

L

L

Ver. 1.1


11

• CDX-GT44U: Indian model/GT45U: E, Saudi Arabia, Mexican, Korean model

REMOTEIN*4


2

REM OUTMax. supply current 0.4 ACorriente máx. de alimentación de 0,4 A


Blue/white stripedCon rayas azules y blancas

RedRojo

YellowAmarillo

WhiteBlanco

GreenVerde

PurpleMorado

White/black stripedCon rayas blancas y negras

Gray/black stripedCon rayas grises y negras

Green/black stripedCon rayas verdes y negras

GrayGris

LeftIzquierdo

RightDerecho

ACC

BATTERY

BlackNegro

Purple/black stripedCon rayas moradas y negras

*2

*1

from car antenna (aerial) desde la antena del automóvil

LeftIzquierdo

RightDerecho

*1 Impedancia de los altavoces de a *2 Cable con terminales RCA (no suministrado).*3 AUDIO OUT (salida de audio) puede cambiarse a

SUB o REAR. Para obtener información, consulte el manual de instrucciones suministrado.

*4 Puede requerirse un adaptador independiente.

*1 Speaker impedance o ms *2 RCA pin cord (not supplied).*3 AUDIO OUT can be switched SUB or REAR.

For details, see the supplied Operating Instructions.

*4 Separate adaptor may be required.

Connection diagram 1 To a metal surface of the car

First connect the black ground (earth) lead, then connect the yellow, and red power supply leads.

2 To the power antenna (aerial) control lead or power supply lead of antenna (aerial) booster Notes

It is not necessary to connect this lead if there is no power antenna (aerial) or antenna (aerial) booster, or with a manually-operated telescopic antenna (aerial).When your car has a built-in FM/AM antenna (aerial) in the rear/side glass, see “Notes on the control and power supply leads.”

To AMP REMOTE IN of an optional power amplifierThis connection is only for amplifiers. Connecting any other system may damage the unit.

3 To the +12 V power terminal which is energized in the accessory position of the ignition key switchNotes

If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. Be sure to connect the black ground (earth) lead to a metal surface of the car first.When your car has a built-in FM/AM antenna (aerial) in the rear/side glass, see “Notes on the control and power supply leads.”

4 To the +12 V power terminal which is energized at all timesBe sure to connect the black ground (earth) lead to a metal surface of the car first.

Diagrama de conexión 1 A una superficie metálica del automóvil

Conecte primero el cable de conexión a masa negro, y después los cables amarillo y rojo de fuente de alimentación.

2 Al cable de control de la antena motorizada o al cable de fuente de alimentación del amplificador de señal de la antenaNotas

Si no se dispone de antena motorizada ni de amplificador de señal de la antena, o se utiliza una antena telescópica accionada manualmente, no será necesario conectar este cable.Si el automóvil tiene una antena de FM/AM incorporada en el cristal trasero o lateral, consulte “Notas sobre los cables de control y de fuente de alimentación”.

A AMP REMOTE IN de un amplificador de potencia opcionalEsta conexión es sólo para amplificadores. La conexión de cualquier otro sistema puede dañar la unidad.

3 Al terminal de alimentación de +12 V que recibe energía en la posición de accesorio del interruptor de encendidoNotas

Si no hay posición de accesorio, conéctelo al terminal de alimentación (batería) de +12 V que recibe energía sin interrupción. Asegúrese de conectar primero el cable de conexión a masa negro a una superficie metálica del automóvil.Si el automóvil tiene una antena de FM/AM incorporada en el cristal trasero o lateral, consulte “Notas sobre los cables de control y de fuente de alimentación”.

4 Al terminal de alimentación de +12 V que recibe energía sin interrupciónAsegúrese de conectar primero el cable de conexión a masa negro a una superficie metálica del automóvil.

Notes on the control and power supply leadsREM OUT lead (blue/white striped) supplies +12 V DC when you turn on the unit.When your car has built-in FM/AM antenna (aerial) in the rear/side glass, connect REM OUT lead (blue/white striped) or the accessory power supply lead (red) to the power terminal of the existing antenna (aerial) booster. For details, consult your dealer.A power antenna (aerial) without a relay box cannot be used with this unit.

Memory hold connectionWhen the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.



Notas sobre los cables de control y de fuente de alimentaciónEl cable REM OUT (rayado azul y blanco) suministra cc +12 V al encender la unidad.Si el automóvil dispone de una antena de FM/AM incorporada en el cristal trasero o lateral, conecte el cable REM OUT (rayado azul y blanco) o el cable de fuente de alimentación auxiliar (rojo) al terminal de alimentación del amplificador de señal de la antena existente. Para obtener más detalles, consulte a su distribuidor.Con esta unidad no es posible utilizar una antena motorizada sin caja de relé.

Conexión para protección de la memoriaSi conecta el cable de fuente de alimentación amarillo, el circuito de la memoria recibirá siempre alimentación, aunque apague el interruptor de encendido.

Notas sobre la conexión de los altavocesAntes de conectar los altavoces, desconecte la alimentación de la unidad.Utilice altavoces con una imp con la capacidad de potencia adecuada para evitar que se dañen.No conecte los terminales de altavoz al chasis del automóvil, ni conecte los terminales del altavoz derecho con los del izquierdo.No conecte el cable de conexión a masa de esta unidad al terminal negativo (–) del altavoz.No intente conectar los altavoces en paralelo.Conecte solamente altavoces pasivos. Si conecta altavoces activos (con amplificadores incorporados) a los terminales de altavoz, puede dañar la unidad.Para evitar fallas de funcionamiento, no utilice los cables de altavoz incorporados instalados en el automóvil si la unidad comparte un cable negativo común (–) para los altavoces derecho e izquierdo.No conecte los cables de altavoz de la unidad entre sí.

Nota sobre la conexiónSi el altavoz y el amplificador no están conectados correctamente, aparecerá “FAILURE” en la pantalla. Si es así, compruebe la conexión de ambos dispositivos.

Ver. 1.2


12

• CDX-GT45U: Argentina model

REMOTEIN*4

REAR / SUBAUDIO OUT*3

2

AMP REMMax. supply current 0.3 ACorriente máx. de alimentación de 0,3 A


Blue/white stripedCon rayas azules y blancas

*2

8

See “Power connection diagram” on the reverse side for details.Para obtener más información, consulte el “Diagrama de conexión de la alimentación” que encontrará al dorso.

from the car’s power connectordesde un conector de alimentación del automóvil

from the car’s speaker connectordesde un conector de altavoces del automóvil

Negative polarity positions 2, 4, 6, and 8 have striped leads.Los cables de las posiciones de polaridad negativa 2, 4, 6 y 8 son rayados.

1Purple

Morado

+ Speaker, Rear, RightAltavoz, posterior, derecho

2 – Speaker, Rear, RightAltavoz, posterior, derecho

3GrayGris

+ Speaker, Front, RightAltavoz, frontal, derecho

4 – Speaker, Front, RightAltavoz, frontal, derecho

5WhiteBlanco

+ Speaker, Front, LeftAltavoz, frontal, izquierdo

6 – Speaker, Front, LeftAltavoz, frontal, izquierdo

7GreenVerde

+ Speaker, Rear, LeftAltavoz, posterior, izquierdo

8 – Speaker, Rear, LeftAltavoz, posterior, izquierdo

Positions 1, 2, 3 and 6 do not have pins.Las posiciones 1, 2, 3 y 6 no tienen pines.

4 YellowAmarillo

continuous power supplyfuente de alimentación continua

5 BlueAzul

power antenna (aerial) controlcontrol de la antena motorizada

7 RedRojo

switched power supplyfuente de alimentación conmutada

8 BlackNegro

earthmasa

*1 Nota sobre la conexión de la antena Si la antena del automóvil es del tipo ISO (International Organization for Standardization), emplee el adaptador suministrado 8 para conectarla. En primer lugar, conecte la antena del automóvil al adaptador suministrado y, a continuación, a la toma de antena de la unidad principal.

* 2 Cable con terminales RCA (no suministrado)*3 AUDIO OUT (salida de audio) puede cambiarse a SUB o

REAR. Para obtener información, consulte el manual de instrucciones suministrado.

* 4 Puede requerirse un adaptador independiente.

* 1 Note for the antenna (aerial) connecting If your car antenna (aerial) is an ISO (International Organisation for Standardisation) type, use the supplied adaptor 8 to connect it. First connect the car antenna (aerial) to the supplied adaptor, then connect it to the antenna (aerial) jack of the master unit.

* 2 RCA pin cord (not supplied)*3 AUDIO OUT can be switched SUB or REAR. For details, see

the supplied Operating Instructions.* 4 Separate adaptor may be required.

from car antenna (aerial) desde la antena del automóvil

*1

Connection diagram A To AMP REMOTE IN of an optional power

amplifierThis connection is only for amplifiers. Connecting any other system may damage the unit.

WarningIf you have a power antenna (aerial) without a relay box, connecting this unit with the supplied power connecting lead 2 may damage the antenna (aerial).Notes on the control and power supply leads

The power antenna (aerial) control lead (blue) supplies +12 V DC when you turn on the tuner.When your car has built-in FM/AM antenna (aerial) in the rear/side glass, connect the power antenna (aerial) control lead (blue) or the accessory power supply lead (red) to the power terminal of the existing antenna (aerial) booster. For details, consult your dealer.A power antenna (aerial) without a relay box cannot be used with this unit.

Memory hold connectionWhen the yellow power input lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.



Diagrama de conexión A A AMP REMOTE IN de un amplificador de

potencia opcionalEsta conexión es sólo para amplificadores. La conexión de cualquier otro sistema puede dañar la unidad.

AdvertenciaSi la antena motorizada no dispone de caja de relé, es posible que la conexión de esta unidad mediante el cable de conexión de alimentación suministrado 2 provoque daños en la antena.Notas sobre los cables de control y de fuente de alimentación

El cable de control de la antena motorizada (azul) suministrará cc de + 12 V cuando conecte la alimentación del sintonizador.Si el automóvil dispone de una antena de FM/AM incorporada en el cristal trasero o lateral, conecte el cable de control de antena motorizada (azul) o el cable de fuente de alimentación auxiliar (rojo) al terminal de alimentación del amplificador de señal de la antena existente. Para obtener más información, consulte a su distribuidor.Con esta unidad no es posible utilizar una antena motorizada sin caja de relé.

Conexión para protección de la memoriaSi conecta el cable de fuente de alimentación amarillo, el circuito de la memoria recibirá siempre alimentación, aunque apague el interruptor de encendido.

Notas sobre la conexión de los altavocesAntes de conectar los altavoces, desconecte la alimentación de la unidad.Utilice altavoces con una impedancia de 4 a 8 con la capacidad de potencia adecuada para evitar que se dañen.No conecte los terminales de altavoz al chasis del automóvil, ni conecte los terminales del altavoz derecho con los del izquierdo.No conecte el cable de conexión a masa de esta unidad al terminal negativo (–) del altavoz.No intente conectar los altavoces en paralelo.Conecte solamente altavoces pasivos. Si conecta altavoces activos (con amplificadores incorporados) a los terminales de altavoz, puede dañar la unidad.Para evitar fallas de funcionamiento, no utilice los cables de altavoz incorporados instalados en el automóvil si la unidad comparte un cable negativo común (–) para los altavoces derecho e izquierdo.No conecte los cables de altavoz de la unidad entre sí.

Nota sobre la conexiónSi el altavoz y el amplificador no están conectados correctamente, aparecerá “FAILURE” en la pantalla. Si es así, compruebe la conexión de ambos dispositivos.


13

SECTION 3DISASSEMBLY

• This set can be disassembled in the order shown below.

3-1. SUB PANEL ASSY ()

3-2. CD MECHANISM BLOCK (Page 14)

SET

3-3. MAIN BOARD (Page 14)

3-5. CHASSIS (T) SUB ASSY (Page 16)

3-6. ROLLER ARM ASSY (Page 16)

3-7. CHASSIS (OP) ASSY (Page 17)

3-8. CHUCKING ARM SUB ASSY (Page 17)

3-9. SLED MOTOR ASSY (Page 18)

3-10. OPTICAL PICK-UP SECTION (Page 19)

3-11. OPTICAL PICK-UP (Page 19)

3-4. SERVO BOARD (Page 15)

Note: Follow the disassembly procedure in the numerical order given.

3-1. SUB PANEL ASSY

2 two claws

3 two claws

4 sub panel assy

1 two screws (+PTT 2.6 6)


14

3-2. CD MECHANISM BLOCK

4 CN700

3

1 screw (+PTT 2.6 6)

2 screw(+PTT 2.6 6)


6 bracket (CD)7 CD mechanism block

3-3. MAIN BOARD

9 MAIN board

insulating sheet3


7 screw (+PTT 2.6 10)

8 heat sink

6 screw (+P 2.6 8)

4 screw (+P 2.6 8)


1 three ground point screws (+PTT 2.6 6)

Note: When the complete MAIN board is replaced, the destination setting is necessary. Refer to “NOTE THE MAIN BOARD OR SYSTEM CONTROLLER (IC501) REPLACING” on page 5.


15

3-4. SERVO BOARD

– CD mechanism deck bottom side view –

– CD mechanism deck bottom side view –

6 SERVO board

2 toothed lock screw (M1.7 2.5)

5 optical pick-up (16 core) (CN101)


3 claw

4 claw

CD mechanism deck

SERVO board

1 Remove the eleven solders.

GRYYELBLUORGREDBLKREDWHT

BLKREDWHT

6 SERVO board

3 claw

4 claw

SERVO board



1 Remove the eleven solders.

GRYYELBLUORGREDBLKREDWHT

BLKREDWHT

5 optical pick-up (16 core) (CN101)

CD mechanism deck

Note: In this unit, the complete SERVO board has been changed in the midway of production. When replacing the complete SERVO board, refer to “ABOUT THE MG-101CA-188 OF FORMER AND NEW” on page 6.

• Former type

• New type

Ver. 1.3


16

3-5. CHASSIS (T) SUB ASSY

3-6. ROLLER ARM ASSY

4 chassis (T) sub assy

3 claw

1 two screws(M 1.7 2.5)

2 two screws (M 1.7 2.5)

3 washer

4 gear (HRA)

6 roller arm assy

5

1 spring (RAL)

2 spring (RAR)


17

3-7. CHASSIS (OP) ASSY

3-8. CHUCKING ARM SUB ASSY

7 two coil springs (damper) (natural)

6 coil spring (damper) (blue)

8 chassis (OP) assy

5

1 tension spring (KF)

2 gear (LE1)

3 lever (D)

4 slider (R)

3 chucking arm sub assy

2

1 spring

Note: Have this portion receive the chassis. Note: Have this portion receive the chassis.

Note: Be careful not to touch the turn table.


18

3-9. SLED MOTOR ASSY

3 sled motor assy

sled motor assy

1 spring

spring

stand

stand

turn table

2 three serration screws (M 2 3)

three serration screws(M 2 3)

Note: Place the stand with care not to touch the turn table.

Note: Never remove these parts since they were adjusted.

bearing (R)

bearing (F)

Note for Assembly

Note: Take care to prevent the chassis from being bent when tightening the three machine screws.


19

3-10. OPTICAL PICK-UP SECTION

3-11. OPTICAL PICK-UP

1

2 optical pick-up section

Note: Be careful not to touch the lens and hologram terminal when removing the optical pick-up section.

There is space at the end of the leaf spring (OPS) to avoid contact with the slide.

5 optical pick-up

4 lead screw assy

Prevent the end of the leaf spring (OPS) from being in contact with the OP slide base.

Prevent the end of the leaf spring (OPS) from being in contact with the OP slide base.

1 tapping screw (P 1.4)

2 leaf spring (OPS)

3 rack

– bottom side view – Notes for Assembly


20

MEMO



2121

SECTION 4DIAGRAMS

4-1. BLOCK DIAGRAM – MAIN Section –

R-CH

R-CH

R-CH

R-CH

R-CH8 AUX_LCH

10 AUX_RCH

MC_RX22MC_TX24WAKE_UP40Z_MUTE42CD_ON38CDM_ON39

RESET12SYSRST20

FW_RXDVBUS_ON

BU+3.3V

51

FW_TXD32

FW_CLK31

CNVSS339

FW_BUSY34

VOUT1 VDD 2

D731

5 TU_LCH

9 AUX_GND

ELECTRONIC VOLUMEIC401

DIGITAL SIGNAL PROCESSORIC701

J1(ANTENNA)

TU901TUNER UNIT

CDMECHANISMDECK BLOCK

(MG-101CA-188)

I2C BUS CONTROLLEDPOWER AMP/MULTIPLEVOLTAGE REGULATOR

IC301

SYSTEM CONTROLIC501 (1/2)

RESETIC403

CN301

7 TU_RCH33 AU_IN_FL

AU_IN_FRAU_IN_RLAU_IN_RRAU_IN_SUBAU_OUT_LCHAU_OUT_RCH

3134

R-CH3032

R-CH 27

HIT2_SDASDASCLRSTN

47

SA_DATA89SA_CLK90

HIT2_SCL48HIT2_RESET49

R-CH (FRONT)R-CH (REAR)

BATT

R-CH

57DA03(F_L_CH)DA02(F_R_CH)DA04(R_L_CH)DA01(R_R_CH)DA05(SUB_CH)

ADIN1(IN_L_CH)ADIN2(IN_R_CH)

RF_ANT_IN34

5

6

7

1

AUDIO_OUT_LAUDIO_OUT_R

RSTN

SCL

SDA

18 FPI1

5459

R-CH

R-CH

R-CH

52617074

95SP_DATA96SP_CLK

66XI

67XO

J901AUX

X70116.934MHz

53

OUT-FL+OUT-FL–

97

OUT-RL+OUT-RL–

R-CH

ANT-REM

35VPBATT

20VP16VP2

30AUDIO+B3133

SERVO+3.3VMECHA+6V

34PANEL+B

R-CH

3537

AU_OUT_FRAU_OUT_RR

R-CH

40AU_OUT_SL39AU_OUT_SR

4 I2C_SCL

AUDIO+8.5VSERVO+3.3VMECHA+6VPANEL+B

2 I2C_SDA

16 BEEP22 STB25 DIAG

7

10

12

11

16

19

2

4

3

6

2223

I2C_SCLI2C_SDA

I2C_SCLI2C_SDA

I2C_SCLI2C_SDA

I2C_SCLI2C_SDA

29I2C_SCL30I2C_SDA

58ATT

28BEEP60AMPSTB59DIAG

12 IN-FL FL+FL–

L

R

RL+RL–

FR+FR–RR+RR–

ANT-REM

BATT

ACC

36AU_OUT_FL11 IN-RL38AU_OUT_RL

MUTEQ406

LD DRIVEQ710

MUTE DRIVEQ407,409

57ACC_INACC DETECT

Q301

BU+3.3V REGIC402

MUTEQ404

29AMP-REM 5 AMP-REM

REAR/SUB

D401

D403

FU601

37BU+B B.U+5V

J401-1

-2AUDIOOUT

MUTEQ402

BU+3.3V 54

BU3.3V6

3

FLASH_W

BUSY7

CLK2

RESET

TXD4

1

5 RXD

CN501FLASH

PROGRAMMING

BU+3.3V

B.U+5V

BATT

19BU_IN

OVER VOLTAGE

CHECKQ802

LOW VOLTAGE

CHECKQ801

BACKUP VOLTAGE

CHECKQ803

28

26

2428

2022

CBA

E

SLSP

F

PDFOCUSTRACK

CN700

15 FNI216 FNI117 FPI221 TNI20 TPI

12643

24 MDI

LD1025 LDO

31 FO032 TRO34 FMO

135 DMO

82

CCE

85

RST

81

BUCK

/SCL

79

BUS2

/SO

80

BUS3

/SI

94

ZDET

55TXDCD DEC

CD SERVO,USB CONTROL

IC601 (1/2)

56RXD8WAKEUP54ZMUTE53CDON52MECON3RESET

74VBUS_ON

51A_ATT

12BU_IN

DRV_ONLOADEJECTL_SWIN_SW

791113

35 DRV_ON36 MEC_LOAD37 MEC_EJECT39 MEC_LIMIT

1540 MEC_INSW

D_SWSELF

175

DRV_6V

DRV_6VMECHA+6V

25

27

41 MEC_DSW25 MEC_SELFSW

88899091

BSIF

_BCK

92

BSIF

_LRC

K

BSIF

_GAT

EBS

IF_D

ATA

DEC_

REQ

BSIF

_REQ

93

DEC_

XMUT

E

37

SRAM

STB

XCCE

XRST

SCLKSISO

ZDET BC

KLR

CK

GATE

DATA IN

TRE

Q

XMUT

E

SSTB

Y

87

292824232215 212019181716 3827

D806

D805

S P R-CH L-CH.

AM MW

: CD

: FM

: BUS AUDIO

Note: CN501 has been deleted in the midway of production.

Ver. 1.4



2222

4-2. BLOCK DIAGRAM – DISPLAY Section –

X50232.768kHz

10

11

94

12

100

95

SYSTEM CONTROLIC501 (2/2)

LCD CONTROLIC901

KEYIN1

CLK LCDCE

LCD_SOLCD_CLKLCD_CE

KEYIN0

92 KEYACK1

82 RE-IN0RE0RE1 81 RE-IN1

XOUT

XIN

X5017.92MHz

15

13 OSCOUT

3 NOSE_SW

OSCIN

6364

62

BACK-LIGHT 2

COLOR 1 3

COM4I

COM1

LCD901

LIQUIDCRYSTALDISPLAYPANEL

5|

505560

51|

54

SEG48I

SEG1DATA PANEL+B

KEY MATRIXLSW905–912,

S901–907

PUSH ENTER/SELECTRE901

ROTARYENCODER

DIMMER 1

4 SIRCS

REMOTECONTROL

SIGNALRECEIVER

IC902

Q901LCD BACK LIGHT

DRIVE

Q903LED

DRIVE

LED932,934,936,938,940,942,944,946,

950,952,954LSW905 (1/2)–LSW912 (1/2)

LED901(LCD BACK LIGHT)

3

26SYNC_OUT

BATT

52FLT_USB

50EN_USB

USB VBUS POWER SUPPLYIC1300

12 EN_USB

9 FLT_USB

53EN_SYS 4 EN_SYS

8 SYN/EN

3 VIN 5USB_OUT

1

CD SERVO,USB CONTROLIC601(2/2)

32

VBUSD+D–

2

CN601

34

SYS_RST

SWDIOSWCLK

4

CN902

(USB)

18 RC_IN1

91 KEYACK0

97 RC_IN0J801

(REMOTE IN)

S P: USB

+1.5V REGIC681

+1.5V REGIC682

5 VDD +1.5V

1CE 4OUTBU+3.3V

5 VDD +1.5V(VDDM)4OUT

USB+ 85USB- 86

RESET 3SWCLK 62SWDIO 61

X180X601

12MHzX282

CPON72

CDON_15V73

(VOLUME)

DIMMERSWITCH

Q905

(N )

Ver. 1.4

Note 1: Refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7 for how to distinguish New type.

Note 2: CN601 has been deleted in the midway of production.



2323

• Waveforms

– MAIN Board –For Schematic Diagrams.Note:• All capacitors are in μF unless otherwise noted. (p: pF) 50

WV or less are not indicated except for electrolytics and tantalums.

• All resistors are in Ω and 1/4 W or less unless otherwise specifi ed.

• f : Internal component.• C : Panel designation.

THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.(In addition to this, the necessary note is printed in each block.)

• A : B+ Line.• Voltages and waveforms are dc with respect to ground

under no-signal (detuned) conditions. no mark : FM ( ) : AM < > : CD PLAY * : Impossible to measure• Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production

tolerances.• Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal production

tolerances.• Circled numbers refer to waveforms.• Signal path. J : CD F : FM f : AM L : AUX c : USB g : BUS AUDIO

For Printed Wiring Boards.Note:• X : Parts extracted from the component side.• Y : Parts extracted from the conductor side.• a : Through hole.• : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated.)

Caution:Pattern face side: (SIDE B)Parts face side:(SIDE A)

Parts on the pattern face side seen from the pattern face are indicated.Parts on the parts face side seen from the parts face are indicated.

Note: The components identi-fi ed by mark 0 or dotted line with mark 0 are criti-cal for safety. Replace only with part number specifi ed.

Note: Les composants identifi és par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le nu-méro spécifi é.

• Indication of transistor.

C

BThese are omitted.

E

Q

• Abbreviation AR : Argentina model CND : Canadian model IND : Indian model KR : Korean model MX : Mexican model RU : Russian model

• Abbreviation AR : Argentina model CND : Canadian model EA : Saudi Arabia model IND : Indian model KR : Korean model MX : Mexican model RU : Russian model

0.9 Vp-p

32.768 kHz

1.2 Vp-p

7.92 MHz

0.5 V/DIV, 20 sec/DIV

0.5 V/DIV, 50 nsec/DIV

1 IC501 qa (XOUT)

2 IC501 qd (OSCOUT)

0.7 Vp-p

12 MHz

0.5 V/DIV, 50 nsec/DIV

3 IC601 i; (X1)

2.3 Vp-p

16.934 MHz

1 V/DIV, 50 msec/DIV

4 IC701 yj (XO)

Ver. 1.2





2424

4-3. PRINTED WIRING BOARD – MAIN Section (1/2) (Except Saudi Arabia Model) – • : Uses unleaded solder.

1

A

B

C

D

E

F

G

H

I

J

234567891011121314

IC1300

IC601

IC701

IC403

IC681 IC682

IC501

IC401

9

16

8

1

5

1

B E

21 20

40 1

1100

7675

2625

5051

1

8

Barcode

1100 8081

5051

3031

7675

5051

1100

2625

R400

R401

R402

R403

R404

C131

0

R405

C1311

R406

C131

2

R407

C131

5

R409

C1316

C131

7

R600

FB61

0

R601

FB61

1

R602

FB61

2

R603

R410

R411

R605R606

R607

D1300

R130

0

R130

2

R613

R614

R421

R130

5

R615

R422

R616

R423

R1307

R617

R424

R1308

R618R619

R429

CN601R814

R131

0

R620

R131

1

R621

R131

2

R1313

R623

R818

R430

R819

R131

5

R432

C203

R433

R629

R820

C401

C403

R636

R637

R638

C409

R639

C601

R833

C410

C411

C605

C606

R642

C413

C607

C414

C608

R644

C415

C609

R645

C416

R646

R647

R648

C419

R649

X601

C612

C610C6

13

C420

C614

C615

C422

C616

R652

C617

R653

R656

C424

R654

C425

R655

C426

IFM601R661

R667 R668

R669

R864

TP718

R865

TP719

R671R672

TP333

R673

TP334

R674R6

75

R676

TP720TP721

TP722TP723TP724

FB69

4

FB695

R685

FB696

C457

R688

FB698

Q301

R689

TP732TP733

TP734

TP735

TP736

TP737 TP738

R690

D401

TP739R692

R693

D403

R695

R697

TP740 TP741TP742

TP743

D805

D806

Q710

MAIN BOARD (SIDE A)

C683

C685

C686

C687

C688

C689

C690

IFM680

R102

FB50

1

R300

R301

R302

R303

R304

R305

R306

R307

R308

R309

R116

R501

R311

R312

R313

R314

R121

R122

R510

R511

R513

FB717

R514

FB718

R515

FB719

R516R517

R518

R710

FB72

0

CN501

R711

FB721

R712

FB722

FB724

R714

R521

R715

R522

R716

R523

R717

R524

R718

R525

R719

R527 R529

R720R721

R722 R7

23 R724

R531

R725

R726

C303

R533

R727

R534

R728

R340

R535

R729

R536

C308

R538

C309

R539

L1301

CL003CL004

R730R7

31

C502

R732

R733

C504

R541

C312

R542

R736

C507

C313

R543

R737

C508

C314

R544

R738

R10

C315

R739

R546

C317

R547R548

C319

R549 C510

FB75

0

R740

X501

FB75

1

R741

C512

R742

C513

R743

C514

R744

C321

R745

R552

R746

C323

R553

R747

C518

R748

R555

R749

R556

C326

R557

IFM501

X701

C711

C712C713

C520

C714

R750

C521

C715

R751

C522

FB762

C523

C717

C330

R560

C718

R561

C331

C719

R562

R563

IFM701

R565

R566

R567

C720

R569

C721C722

R378

C724 C725

R761

C726

C727

R763

R570

C728

R764

R571

C729

R572R573R574

R576

R577

C730

C732C733

FB39

8

C734

C735

FB782C737C738

S8C7

39

R584

C741 C7

42C7

43

TP633

C744

TP634

C745

TP635

C746

C747

C748

Q401 Q402 Q403 Q404

C750

Q405

C751

Q406

C752

Q407

C753C754

Q409

C756

C759

C761

C764

Q801 Q802

C766

Q803

C767

C768

D321D323

C771

C772

C776

C777

C778

C779

C398

IFM50

C782

C783 C784

D530

C786

C787C7

88

C789

IFM60

D731

C792

TP682

C11

IFM70

C15

C130

1

C130

4

C130

5

C1306

C130

7

C130

8

C1309

1-884-818- 11, 21, 22

16 20

1 2

34

134

5

1

3 45

C100

L1300

Ver. 1.4

Note 2: When IC501 is replaced, the destination setting is necessary. Refer to “NOTE THE MAIN BOARD OR SYSTEM CONTROLLER (IC501) REPLACING” on page 5.

Note 1: Refer to SUPPLEMENT-1 for print-ed wiring board of the MAIN board (Saudi Arabia model).

Note 4: C741, C743, C745, CN501 and CN601 have been deleted in the midway of production.

Note 3: IC501 has been changed in the midway of production. When IC501 is replaced, be sure to refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7.



2525

1

A

B

C

D

E

F

G

H

I

2 3 4 5 6 7 8 9 10 11 12 13 14

IC402

IC301

KEY BOARD CN901A

FB80

1

FB80

2FB

803

R604

R415

R416R417

R418

R419

R1301

R420

R622

R431

R625

R434

C402

JL001

JL002

JL003

C407

JL004JL005

JL006

JL007

JL008

JL009

R643

JL010

JL011

JL012

JL013

C436

C437

C438

C439

C440

C442

TP342

FB89

0FB

891

R699

F4

R899

TP761

TP781

TP785

AB1

R502

L1

C101

C103

C301

C302 C305

C306

C501C503

R540

C311

R545

R11R12R13

C701

R19

C327

IFM500

IFM502

FB760

C716

C332

R564

JL700

C335

JL701

JL702

JL703

R568

JL704

JL705JL706

JL707JL708

JL709

R765

R766

JL710

R575

JL711

JL712

JL713

R578

JL714

R579

JL715JL716

JL717

JL718

JL719

S6

R199

JL720

D101

JL721

D102

R586

JL722

D103

JL723JL724

R395

JL725

R396

TP632

JL726 JL727

JL728

JL729

D110

JL730

JL731

JL732

D306

L301

JL733

TP640

CL061

TP641

TP642

CL063

TP643

CL064

TP644

D119

CL06

5CL

066

CL067

CL06

8CL

069

D318

C760

CL07

0

CL07

1CL

072

CL07

3CL

074

CL07

5CL

076

CL07

7

D320

CL078

CL07

9

D324

CL081CL082

C780

FB19

C399

W001

C781

W002

C10

TP695

TP696

J8019

1 8

16

191817

CN301

FU601

137

236

J401

J401

12 11

13 10

9

1

CN01

J1

A001

1

2 20

19 22

CN102

21

12

2728CN700

AEP,UKMODEL

C334

MAIN BOARD (SIDE B)

1-884-818- 11, 21, 22

J801(REMOTE IN)

US, CND, E, MX, KR, IND MODEL

AEP, RU, UK, AR MODEL

1

3

5

4

X502

J1(ANTENNA)

-2R

-1L

REAR/SUB

AUDIO OUT

TU901TUNER UNIT(TUX-DSP02)

SERVOBOARD

SENSORBOARD

CD MECHANISMDECK BLOCK

(MG-101CA-188)

OPTICALPICK-UPBLOCK

(DAX-25A)

4-4. PRINTED WIRING BOARDS – MAIN Section (2/2) (Except Saudi Arabia Model) – • : Uses unleaded solder.

(Page 31)

Ver. 1.4

Note 2: When the SERVO board is defective, exchange the complete mounted board. (Refer to Note 4)

Note 1: Refer to SUPPLEMENT-1 for print-ed wiring board of the MAIN board (Saudi Arabia model).

Note 3: When the SENSOR board is defective, exchange the MECHANICAL BLOCK (Z) ASSY 08 (Former type) or MECHANICAL BLOCK (11CA) ASSY (New type). (Refer to Note 4)

Note 4: As for the mechanism deck (MG-101CA-188) carried in this unit, component parts have been changed from the midway of production. When you perform repair exchange of the mechanism deck (MG-101CA-188), refer to “ABOUT THE MG-101CA-188 OF FORMER AND NEW” on page 6.



2626

D

A

9 11

G

C

1 72 10 14

H

1364

B

E

85

F

I

3 12

3MAIN

BOARD(3/5)

MAIN 1BOARD(4/5)

2MAIN BOARD (2/5)

IC B/D

IC B/D

US, CND, E, EA, MX, KR, IND MODEL

AEP, RU, UK, AR MODEL

5.1

3.3

6.3

2.70

13.5

0

13.8

0

0

0

0

0.6

3.3

3.3

3.3

5.1

7 3.3 7

14.4 7 7 4.6

4.3

4.3

4.3

4.3

4.5 1 1

14.4 1 3.3 1 3.3

13.5 8.6

3.3

6.2

10.5

14.4

13.8 5.1

AEP, UK MODEL

(1/5)MAIN BOARD

16V

IC301

IC403IC402

0.22C301

C31210

47kR312

4.7kR314

C3110.22

0.22C308

CN30116P

1FL+2RL+3RR+4FR+5AMP-REM6ANT-REM7ACC8GND9FL-10RL-11RR-12FR-

16+B

13TEL-ATT14ILL15TEST

17+B18+B19+B

150R307

1C306

22R429

100kR401

4

3

1

2

PST8228ULIC403

VOUT

Vdd NC

VSS

0.1C401

R818220k

1kR820

220

R303

220

R304

R513 100k

47kR313

220

R305

220

R306

DRC5114E0LQ802

DRC5114E0LQ409

DRA5114E0LQ407

100

R301

100

R302

2SC4154TP-1EFQ301

J801

2SC4154TP-1EFQ803

RKZ18B2KGP1D806

RKZ1

8B2K

GP1

D320

47k

R309

47pC326

DRC5144E0LQ801

RKZ1

8B2K

GP1

D323

0R864

16V47

C313

R308 0

USB_GND

BU_3.3V

DR_6V

BU_GND

A_GND

VDD_3.3V

D_GND

DR_GND

GN1G

D324

GN1G

D318

GN1G

D321

D306GN1G

25V47

C416

SYS_RSTAU_GND

R814220k

0R300

R4330

R340

0

IC301

1

TAB

2

I2C_

SDA

3

OUT-

FL-

4

I2C_

SCL

5

OUT-

FL+

6

VP2

7

OUT-

RL-

8

P-GN

D1

9

OUT-

RL+

10

SVR

11

IN-R

L

12

IN-F

L

13

S-GN

D

14

IN-F

R

15

IN-R

R

16

BEEP

17

OUT-

RR+

18

P-GN

D3

19

OUT-

RR-

20

VP1

21

OUT-

FR+

22

STB

23

OUT-

FR-

24

P-GN

D4

25

DIAG

26

RST

27

ANT-

REM

28

CRES

29

AMP-

REM

30

AUDI

O+B

(8

.5V)

31

SERV

O-3.

3V

32

GND

33

MECH

A-6V

34

PANE

L+B

35

VP

36

CBU

37

BU+B

R4340

R8191k

RKZ7.5B2KGP1D805

0R899

NEW140uHL301

3 4

2.2

C314

1000

pC3

23

6.3V

C309220

6.3V

C403220 6.3V

220C411

16V

22C3

03

C3991

0R400

0R3

96

0R3

95

FB39

8

MM18

36A3

3NRE

IC40

2

1

CONT

2

GND

3

NP

4

VOUT

5

VIN

0R430

DA2J

1010

0LD4

01

FB801

FB802

FB803

FB890FB891

JL009

JL010

36V2AF4

16V3300C334

JL01

2

JL01

3

1C305

1C327

1C3

02

0.47

C315

0.47

C317

0.47

C319

0.47

C321

0.47C331

0.47C330

0.00

1C3

98

0.1C335

10kR31110kR378

0.1C407

6.3V1000C409

R833100k

1JS1+B

1C402

12345

6

78

9

15 16 17 18 19 20

BUS5

BUS6 21

BEEP

STB

DIAG

RCIN

0

RCIN

1

XM_R

X

I2C_

SCL

I2C_

SDA

RESE

T

ACC

7

FRONT

7

12

7

RL+

2

ANT REM

4

1

GND

10

BATT

14

FRONT

8

2

AMP REM

-

R-CH

6

+

BATT

REAR

RL-

5

RR- AMP REM

FR+

RL-

14

6

+

ANT REM

REARFL+

3

ATT

RL+

13

L-CH

3

1

GND

BATT

+

+

5

16

8

4-

6

3

13

FR- 6

8

4

10

FL-

4

ANT REM

FL+

R-CH

RR+

RR+

9

7

RR-

5

16

15

1

11

11

-

FR+

5

GND

ACC

12

2

2

-

3

1

FR-

FL-

ACC

9

8ACC

L-CH

15

FU601

32V10A

IC2 BUS CONTROLLEDPOWER AMP/MULTIPLEVOLTAGE REGULATOR

LOW VOLTAGE CHECK

OVER VOLTAGE CHECK

ACC DETECT

BACKUP VOLTAGEQ803

CHECK

(REMOTE IN)

RESET

BU +3.3V REG

Q407,409MUTE DRIVE

TDF8556AJ/N5

• See page 33, 34 for IC Block Diagrams.4-5. SCHEMATIC DIAGRAM – MAIN Section (1/5) –

(Page 27)

(Page 28)

(Page 29)

Ver. 1.4



2727

D

A

9 11

G

C

1 72 10 14

H

1364

B

E

85

F

3 12

5 BOARD(3/5)

MAIN

4BOARD(5/5)

MAIN

2MAIN BOARD (1/5)

1 2IC B/D

0

9.2 6.2

4.6

14.2

3.3

0

0

5.2

1

1.7

5.9

3.3

0.1

1.1

3.1

00

2.83.33.33.3

3.33.3

3.33.33.30.2

3.3

3.3

3.3

0 0 0 3.3

3.3

3.1

3.3

3.33.32.72.63.1

003.33.33.3

0

0000

3.3 0

3.1 0

3.3 0

0.3

1.5

3.3

1.7

1.7

3.3

3.1

3.1

2.8

3.3

3.3

3.3

1.1 0

3.3

3.3

(EXCEPT EA)(EA)

*

*

EXCEPT EA MODEL

1

IC501

IC1300

MAIN BOARD (2/5)

100k

R545

100k

R546

0R543

1kR5331kR534

470R535

100kR536

100kR531

10k

R538

100k

R540

10MR541

220kR542

18pC508

100

R547

1000pC502100R525

0.5%10k

R516

100R524

0.5%10k

R515

100R5230.5%

10kR514

1000

pC5

1210

00p

C514

0.01

C523

0.01

C522

0.1

C504

10k

R578

10kR579100kR576100kR575

R586

100k

1kR517

1kR518

33k

R522

33k

R521

0R5610R562

2.2k

R556

2.2k

R557

47p

C521

47p

C520

100kR567

CAM001

R584 100k

CL00

3CL

004

0R5

39

0R5

480

R549

R5441M

100k

R569

R552

100k

100R563

100R564

100R570

100

R572

100k

R560

BAT5

4ALT

1GD7

31

FB50

1

R527

100k

100kR566

100kR565

470R529

JL001JL002

JL003JL004JL005JL006JL007

100k

R577

JL008

0R5

55

1C1301

100R1301

100

R571

0.1C1310

0R865

100

R573100

R574

DB2X

4140

0LD1

300

12345678

8PCN501

RESETCLK

BUSYTXDRXD

BU3.3VFLASH_W

GND

22pC507

TXDRXD

SA_DATASA_CLK

WAKE_UPEJECT_OK

BU_IN

USB_D-

CD_ONVBUS_ON

CDM_ON

USB_D+

A_ATTZ_MUTE

100kR502

100kR13020

L1300

0.5%39k

R1311

100kR568

0.01C1307

MC28

38-T

112-

1D4

03

IC501

1

LCD_

SO

2

LCD_

CLK

3

NOSE

_SW

4

SIRC

S

5

UNIS

O

6

UNIS

I

7

UNIS

CK

8

BYTE

9

CNVS

S

10

XIN

11

XOUT

12

RESE

T

13

OSCO

UT

14

VSS

15

OSCI

N

16

VCC1

17

NMI

18

RC_I

N1

19

BUIN

20

SYSR

ST

21

BUS_

ON

22

MC_R

X

23

DOOR

_SW

24

MC_T

X

25

DOOR

_ING

26

SYNC

_OUT

27

EJEC

T_OK

28

BEEP

29

I2C_

SCL

30

I2C_

SDA 31FW_TXD

32FW_RXD33FW_CLK34FW_BUSY35XM_TX36XM_RX37XM_POWER EN38CD_ON39CDM_ON40WAKE_UP41EPM42Z_MUTE43R/S SW_SEL44EQ_TYPE_SEL45INITCOL_SEL46CE47HIT2_SDA48HIT2_SCL49HIT2_RESET50EN_USB

51

VBUS

_ON

52

FLT_

USB

53

EN_S

YS

54

IPOD

55

EXTA

TT_X

EN

56

TELA

TT

57

ACC_

IN

58

ATT

59

DIAG

60

AMPS

TB

61

CYRI

L_SE

L

62

VCC2

63

F_AU

X_AT

T

64

VSS

65

ILLU

MI S

EL

66

COLS

W S

EL

67

BT_M

UTE

68

B-OU

T SE

L

69

AREA

SEL3

70

AREA

SEL2

71

AREA

SEL1

72

AREA

SEL0

73

MODE

LNAM

E_SE

L0

74

MODE

LNAM

E_SE

L1

75

MODE

LNAM

E_SE

L2

76

MODE

LNAM

E_SE

L3

77

BT_T

X

78

BT_R

X

79

DEBU

G_1

80

DEBU

G_2

81 RE-IN182 RE-IN083 ILL_IN84 BT_RTS85 BT_CTS86 BT_RESET87 BT_POWER88 BT_MIC_DET89 SA_DATA90 SA_CLK91 KEYACK092 KEYACK193 BT_MIC_ON94 KEYIN195 KEYIN096 AVSS97 RC_IN098 AVRH99 AVDD

100 LCD_CE

100R510100R511

32.768kHzX502

2.2C1308

0.01C1312

0.01C1309

0.01C513

22C1305

0.01C1317

C501

47p

C503

47p

IC1300OZ539IGN-A1-0-TR

1 BST

2 LX

3 VIN

4 EN_SYS

5 USB_OUT

6 FB_US

7USB_IN

8 SYNC 9FLT_USB

10ISET_USB

11VIC_USB

12EN_USB

13SS_SYS

14GNDA

15RT

16VREF

47uHL1301

X5017.92MHz

C130447

22C1315

16V100

C1311

0.5%82k

R1307

0.5%82k

R1308680p

C1306

0.04

7C5

18

0.5%5.6k

R1305

470

R553

100kR501

C510

C1316

0.5%10k

R13121k

R1310R13151k220k

R1313

R1300470

RB751V40,115D530

BUS2

BUS3

BUS4

101112

13

14

15 16 17 18 19 20BUS5

BUS6

21

ACC

DIAG

RE0RE1

BEEP

RESE

T

BUSY

SYNC

STB

XM_RX

SYNC

EN_U

SBFL

T_US

B

CNVS

S

TXD

RXD

EJEC

T_OK

CD_ONCDM_ON

WAKE_UP

Z_MUTE

VBUS

_ON

USB_D-A_ATT

Z_MUTEVBUS_ON

CD_ONCDM_ON

TXDRXD

SA_DATASA_CLK

EJECT_OKWAKE_UP

BU_IN

F_CLK

EN_USBUSB_D+

KEY0KEY1

BUSYF_TXDF_RXD

CNVSS

17

A_ATT

EN_S

YSFL

T_US

B

RESET

SA_DATASA_CLK

RCIN0

LCD_CE

LCD_DATALCD_CLKNOSE_SWSIRCS

RCIN

1

EN_S

YS

F_CLKF_RXDF_TXD

I2C_SCLI2C_SDA

SYSTEM CONTROL

)(PROGRAMMINGFLASH

USB VBUS POWER SUPPLY

10.1C1316

R5F3650KBDZ75FA (New type)R5F3650KBDZ78FA (Former type)

• See page 23 for Waveforms. • See page 35 for IC Block Diagrams. • See page 37 for IC Pin Function Description of IC501.4-6. SCHEMATIC DIAGRAM – MAIN Section (2/5) –

(Page 30)

(Page 28)

(Page 26)

Ver. 1.4

Note 1: When IC501 is replaced, the destination setting is necessary. Refer to “NOTE THE MAIN BOARD OR SYSTEM CONTROLLER (IC501) REPLACING” on page 5.


Note 3: CN501 has been deleted in the midway of production.



2828

4-7. SCHEMATIC DIAGRAM – MAIN Section (3/5) –

D

A

9 11

G

C

1 72 10

H

64

B

E

85

F

I

3 12

A BOARDCN901

KEY

MAIN3BOARD

(1/5)

MAIN6BOARD

(4/5)

MAIN5BOARD

(2/5)

IC B/D

0 0 0 000

000000

4

4

4

4

4

4

3.6

3.6

3.6

3.6

3.6

4

4

8.5

3.3

3.3

8.4

3.2

3.2

3.2

3.2

3.2

3.2

3.7

MAIN BOARD (3/5)

IC401

40

39

38

37

36

35

34 7

6

5

4

3

2

1

33

32

30

31

8

27

28

29

9

10

11

12

13

14

24 17

25

26

23

22

21 20

19

18

15

16

BD3467FV-E2IC401

BUS_LCH

BUS_RCH

NCO

NCO

TU_LCH

TU_GND

TU_RCH

AUX_LCH

AUX_GND

AUX_RCH

XM_LCH

XM_GND

XM_RCH

FP1

FN1

FN2

FP2

NCO

NCO

NCOMUTE

I2C_SCL

I2C_SDA

GND

FIL

VCC(8.5V)

AU_OUT_RCH

AU_OUT_LCH

NCO

AU_IN_SUB

AU_IN_RL

AU_IN_RR

AU_IN_FL

AU_IN_FR

AU_OUT_FR

AU_OUT_FL

AU_OUT_RR

AU_OUT_RL

AU_OUT_SR

AU_OUT_SL

1kR404 R402

1k1kR423

10kR411 R403

10k10kR405

1kR410

10kR424

1kR415

2.2kR419

12kR418

0R420

1kR416

1C436

1C437

0R431

C100 0.1

10kR422

10kR409

0R116

R4060

12kR417

1kR407

1kR421

D110

RKZ6

.8B2

KGP1

RKZ6

.8B2

KGP1

D102

RKZ6

.8B2

KGP1

D101

D119RKZ6.8B2KGP1

AU_IN_LCH

AU_FL_CH

AU_RR_CH

AU_RL_CH

AU_SUB_CH

AU_IN_RCH

AU_FR_CH

CAM002

16V220

C415

CL069

CL076

CL074

CL077

CL070

CL079

CL071

CL063

CL075

CL064

CL078

CL066

CL072

CL067

CL065

CL068

CL073

CL061

RF_ANT_IN

RF_GND

AUDIO_OUT_L

AUDIO_OUT_R

RSTN

SCL

SDA

+8.5V

POWER_GND

TU901

9

4

5

3

12

6

78

1310

1211

R43210k

J1(ANTENNA)

C1011000p

0R110R12

CN10220P

1 USB_GND2 USB_VBUS3 D-4 D+5 GND6 KEY_GND7 AUX_L8 AUX_R9 AUX_GND

10 RE_011 RE_112 KEY_113 KEY_014 SIRCS15 LCD_DATA16 LCD_CE17 LCD_CLK18 ILL(FP+B)19 PANNEL_SW20 GND

G

RED

WHT J401

1C10

C2031000p

16V10

C425

16V47

C11

4.7uHL1

16V10

C419

C41010

16V16V10

C413

16V10

C420

16V10

C422

16V10

C424

1C15

0R101kR13

0.01C457

R102

0R1220R121

LTC014TUBFS8TLQ401

LTC014TUBFS8TLQ402

LTC014TUBFS8TLQ403

LTC014TUBFS8TLQ404

LTC014TUBFS8TLQ405 Q406

LTC014TUBFS8TL

JL011

0R19

R199 0

FB19

C4401000p

C4391000p

C1030.1

2.2C438

0.1C414

C4420.1

CAM003

12345

6

78

9

BUS2

BUS3

BUS4

1011

12

13

14

NOSE_SW

USB_D+USB_D-

RE0

KEY0SIRCSLCD_DATALCD_CELCD_CLK

KEY1

I2C_SDA

I2C_SCL

RE1

TUNER UNIT(TUX-DSP02)

R

LAUDIOREAR/SUB

OUT

Q401-406MUTE

ELECTRONIC VOLUME

-1

-2

• See page 36 for IC Block Diagrams.

(Page 32)

(Page 27)

(Page 29)

(Page 26)

Ver. 1.4



2929

D

A

9 11

G

C

1 72 10

H

1364

B

E

85

F

I

3 12

MAIN7 BOARD

(5/5)

MAIN1BOARD

(1/5)

MAIN 6BOARD(3/5)

4

0 3.2

3.2

1.60.81.63.21.61.6

1.61.61.53.31.53.2

1.6 0 1.6

1.6

1.6

1.5

1.6

1.6

1.6

1.6

0.6

1.4

1.6

1.6

1.6

1.6

1.7

3.2

1.6

0.9

1.6

3.2

1.301.6

3.32.703.30000001.53.3

3.23.3000

2.900

3.2

1.6

1.6

1.6

3.2

1.6

1.6

3.2

1.6

1.5

1.3

1.4

3.2

3.2

1.5

0.6

1.6

2.6

1.5

(MG-101CA-188)DECK BLOCK

CD MECHANISM

SERVOBOARD

SENSORBOARD

(4/5)MAIN BOARD

IC701

0.015C772

R736 100k

TP720

DR_6V

0.1C721

6.3V22

C725

2200

pC7

47

0.033C718

1kR740TP743

0R733TP734

47pC771

1kR737

0.1C768

0R763

JL727

VDD_3.3V

TP719

TP733

AU_IN_LCH

150pC745

0.01

5C7

84

TP724

TP736

100R741

3300

pC7

30 0FB762

0R761

TP742

0R7

49

330R7190FB720

DR_GND

330R720

22kR751

C7641000p

0.01C759

2200

pC7

48

0FB760

22kR750

0R716

TP740

15kR743

D_GND

0.1C720

0FB750

1000pC788

TP78

5

330R717

0.1C782

0R7

46

1MR722

0FB718

470p

C716

0FB722

330R718

0R714

TP738

1.5k

R723

2.7kR7250FB717

TC94A99FG-003 (SY)IC701

1

LPFO

2

PVRE

F

3

VCOF

4

RVSS

3

5

VCOI

6

RVDD

3

7

SLCO

8

RFI

9

RFRP

I

10

RFEQ

O

11

DCOF

C

12

AGCI

13

RFO

14

RVSS

3

15

FNI2

16

FNI1

17

FPI2

18

FPI1

19

VDD1

-1

20

TPI

21

TNI

22

VRO

23

AVSS

3

24

MDI

25

LDO

26 FSMONIT27 RFZI28 RFRP29 TEI30 AVDD331 FOO32 TRO33 VSS-134 FMO35 DMO36 VDDM137 /SRAMSTB38 VDD1-239 VDD3-140 CD-MON2/PIO1041 CD-MON3/PIO1142 PIO12 / DT/BT_DATAi43 PIO13 / DT/BT_BCKi44 PIO14 / DT/BT_LRCKi45

PIO15 / SDo0

46

PIO16 / SDo1

47

PIO17 / SDo2

48

PIO18 / LRCKo

49

PIO19 / BCKo

50

PIO20 / Cko

51

DVDD

12

52

DAO1

(R_R

-CH)

53

DVSS

12

54

DAO2

(F_R

-CH)

55

DVRE

F

56

DVDD

34

57

DAO3

(F_L

-CH)

58

DVSS

34

59

DAO4

(R_L

-CH)

60

DVDD

5

61

DAO5

(SUB

-CH)

62

DVSS

5

63

VDD1

-3

64

VSS-

2

65

XVSS

3

66

XI

67

XO

68

XVDD

3

69

ADVD

D3

70

ADIN

1 (IN

_L-C

H)

71

ADVR

EFL

72

ADVC

M

73

ADVR

EFH

74

ADIN

2 (IN

_R-C

H)

75

ADVS

S3

76MS77BUS078BUS179BUS2/So80BUS3/Si81BUCK/SCL82/CCE83VDD3-284VSS-385/RST86VDD1-487DEC_REQ88BSIF_REQ89BSIF_GATE90BSIF_DATA91BSIF_BCK92BSIF_LRCK93DEC_XMUTE94ZDET95CD-MON0 / SP_DATA96CD-MON1 / SP_CLK97TEST98PDO99TMAX

100LPFN

TP721

0FB719

TP722

AU_RR_CH

R730

100k

2200

pC7

89

4V47

C712

10k

R727

0.1C724

0.1C767

BU_GND

0.01

C777

330R721

100

R745

3300

pC7

27

TP735

TP732

0.01

C766

2SA1365-T112-1EFQ710

LD DRIVE

JL728

1kR738

330kR744

TP78

1

3300

pC7

29

AU_RL_CH

TP741

0R732

0FB721

TP761

0R7

48

1kR710

470p

C715

3300

pC7

26

0.1C739

3300

pC7

28

0.01

C779

TP737

2.7kR724

0.1C783

10k

R726

TP718

AU_SUB_CH

BU_3.3V

R728

100k

0FB751

1000pC756

USB_GND

47kR742

150pC741

0R7

47

0R715

27p

C734

0.1C787

0.1C722

0.1C735

0.1C786

1000pC685

JL726

5600pC719

150pC743

0.1C717

JL72

9

A_GND

AU_IN_RCH

1kR739

R764 0

TP739

R729

100k

TP723

10R711

3.3R712

AU_FR_CHAU_FL_CH

0.1

C778

16.934MHzX701

SYS_RST

AU_GND

JL700JL701JL702JL703JL704JL705JL706

JL707JL708JL709

JL710

JL711

JL712JL713JL714JL715JL716JL717JL718JL719

JL720JL721JL722JL723JL724JL725

JL730

0R765

0R699

R731

100k

1000pC686

C7321000p

35V 4.7C75035V 4.7C75135V 4.7C75235V 4.7C753

FB72

4

FB782

5600pC780

0.04

7C7

130.

047

C714

2.2C737 2.2C738

2.2C754

0R766

0.1C792

2.2C744

2.2C742

2.2C746

0.1C701

0.1C711

0.1C733

0.1C760

0.1C761

0.1C776

0.1C781

28PCN700

1 SP3 SL5 SELF7 DRV_ON9 LOAD

11 EJECT13 L_SW15 IN_SW17 D_SW19 BU_GND21 DRV_GND23 DRV_GND25 DRV_6V27 DRV_6V

14OP_GND161/2VCC18OP_VCC20E22F24A26C28B

OP_GND 24TRACK6FOCUS8DRV_VREF

10LD12PD

2223242526272829

30

31323334

35

36

37

38

39

40

42

43

41

BUS7

BUS8

BUS9

SA_DATASA_CLK

EJECTLOADDRV_ON

D_SWIN_SWL_SW

SELF

TE

FE/SBAD

VC

RFACRFO

IOP+IOP-

DIGITAL SIGNAL PROCESSOR

OPTICALPICK-UPBLOCK

(DAX-25A)

• See page 23 for Waveforms. • See page 39 for IC Pin Function Description of IC701.4-8. SCHEMATIC DIAGRAM – MAIN Section (4/5) –

(Page 28)

(Page 30)

(Page 26)

Note 1: When the SERVO board is defective, exchange the complete mounted board. (Refer to Note 3)

Note 2: When the SENSOR board is defective, exchange the MECHANICAL BLOCK (Z) ASSY 08 (Former type) or MECHANICAL BLOCK (11CA) ASSY (New type). (Refer to Note 3)

Note 3: As for the mechanism deck (MG-101CA-188) carried in this unit, component parts have been changed from the midway of production. When you perform repair exchange of the mechanism deck (MG-101CA-188), refer to “ABOUT THE MG-101CA-188 OF FORMER AND NEW” on page 6.

Ver. 1.4

Note 4: C741, C743 and C745 have been deleted in the midway of production.



3030

D

A

9

G

C

1 72 10

J

H

64

B

E

85

F

I

3

MAIN 7BOARD(4/5)

MAIN4 BOARD(2/5)

3

IC B/D

0 0 0 0 0 0 0 0 3.3

0 0 3.2

0 0 3.3

1.6

0 1.4

3.3

0 3.3

3.33.2

003

3.3

2.7

000000000

3.33.3

3.33.3

00000

3.10

3.3

3.33.303.33.30

03.

33.

3

3.3 0 0 0

3.3

3.2

3.3

3.2

3.2

2.8

3.2

01.5

3.3

1.5

3.3

3.3

0

3.3

IC681

IC601

MAIN BOARD (5/5)

R6880

100

R629

10kR639

100

R600

1MR668

100R644

100R646

2.2C689

0FB695

33kR691

R607100k

NJM2878F3-15 (TE2)IC682

CEGND

NCVOUT

VDD

100R647

100R621

TP682

47kR613

10kR622

TP63

2

1kR620

R6690

0.01C605

10kR642

R625100k

TP695

100

R601

100

R602

100R661

0.1

C608 TP

633

10k

R667

10pC614

5

4 321

5

4 321

NJM2878F3-15 (TE2)IC681

CEGND

NCVOUT

VDD

100kR606

100R649

33kR637

TP63

4

2.2C688

1kR617

0FB610

TP63

5

0R697

33kR638

0.1C616

100

R603

100R604

100R6451kR619

TP34

2

1kR618

0FB696

30kR690

0R692

10kR6141kR615

0R693

0.1C613

TP696

0R689

0FB698

10pC615

100kR605

R6850

0.01C607

0.01C606

100R648

100kR676

TP333

1kR616

0FB694

100kR675

5PCN601

1 VCC2 SYS_RST3 SWCLK4 SWDIO5 GND

12MH

zX6

01

1

2

USB_D+USB_D-A_ATTZ_MUTEVBUS_ONCD_ONCDM_ONTXDRXD

WAKE_UP

SA_CLK

BU_IN

EJECT_OK

SA_DATA

TP641TP640

TP642

TP643

R6950

100kR643

TP644

100k

R655

100k

R656

100k

R654

100k

R653

100k

R652

C6871

C6901

C6101000p

FB611

FB612

JL731

M321FEFG-7KN3 (SYIC601

1 AVSS

2 VREFH

3 RESET

4 MODE

5 OPEN_REQ

6 EJECT_OK

7 NC

8 WAKEUP

9 NC

10 NC

11 NC

12 BU_IN

13 DVSS

14 NC

15 CD_ZDET

16 DEC_XMUTE

17 DEC_LRCK

18 DEC_BCK

19 DEC_DATA

20 DEC_GATE

21 DEC_REQ

22 CD_SO

23 CD_SI

24 CD_SCLK

25 MEC_SELFSW

26NC

27DE

C_IN

T28

CD_X

RST

29CD

_XCC

E30

NC31

NC32

Z/Y_

CHEC

K33

DVCC

334

DVSS

35DR

V_ON

36ME

C_LO

AD37

MEC_

EJEC

T38

DEC_

SSTB

Y39

MEC_

LIMI

T40

MEC_

INSW

41ME

C_DS

W42

NC43

NC44

XLIN

E45

XINI

T046

FE/S

BAD_

SEL

47Z/

Y_SE

L48

NC49

MECO

N_CH

ECK

50CD

ON_C

HECK

51A-ATT

52MECON

53CDON

54ZMUTE

55TxD

56RxD

57NC

58NC

59DVCC3

60DVSS

61SWDIO

62SWCLK

63TRACECLK

64TRACEDATA0

65TRACEDATA1

66TRACEDATA2

67TRACEDATA3

68CP_SDA

69CP_SCL

70NC

71CP_RESET

72CPON

73CDON_15V

74VBUS_ON

75NC

76RE

GVCC

3

77XT

1

78XT

2

79CV

CC3

80X1

81CV

SS

82X2

83DV

CC3

84DV

SS

85US

B+

86US

B-

87NM

I

88TE

ST

89TE

ST

90NC

91NC

92AV

CC3

93NC

94NC

95NC

96NC

97NC

98NC

99NC

100

NC

JL732JL733

0R623

4.7

R671

4.7

R672

15kR673

15kR674

0.1C601

0.1C609

0.1C612

0.1C617

0.1C683

R6364.7k

2223242526272829

30

31323334

35

36

37

38

39

40

42

43

41

BUS7

BUS8

BUS9

DRV_

ON

CD_ONZ_MUTE

CDM_ONSE

LF

D_SW

L_SW

IN_S

W

VBUS_ON

USB_D+

A_ATTZ_MUTEVBUS_ONCD_ONCDM_ON

RXDTXD

SA_DATASA_CLKEJECT_OKWAKE_UPBU_IN

USB_D-

RXDTXD

LOAD

EJEC

T

USB_

D+US

B_D-

EJEC

T_OK

BU_I

N

WAK

E_UP

A_ATT

IC682

+1.5V REG

+1.5V REG

CD SERVO, USB CONTROL

• See page 23 for Waveforms. • See page 36 for IC Block Diagrams. • See page 42 for IC Pin Function Description of IC601.4-9. SCHEMATIC DIAGRAM – MAIN Section (5/5) –

(Page 27)

(Page 29)

Note: CN601 has been deleted in the midway of production.

Ver. 1.4



3131

1

A

B

C

D

E

F

G

H

I

2 3 4 5 6 7 8 9 10 11 12 13 14

IC901

IC902

152

LSW905LSW906LSW907LSW908LSW909LSW910LSW911LSW912

LCD901LIQUID CRYSTAL DISPLAY PANEL

LED901LED932

LED9

34LE

D936

LED938

LED940

LED942

LED944

LED9

46

LED950

LED952

LED9

54

R903R9

20

R921R946

R952

R954


LED946,S901Z

LED952,S907MODE

RE901PUSH ENTER/SELECT

J901AUX

CN902

(USB)

LED938,940,942(ILLUMINATION)

LSW9111

/ALBUM V2

/ALBUM v

LSW9106

/PAUSE

LSW906DSPL

/ SCRL

LSW905LSW9093

/REP

LSW9084

/SHUF

LSW9075

/ZAP

S901

S902

S903

LED936,S903SEEK +>

M

LED950,S902SOURCE/ OFF

LED932,S904

LED954,S906

LED933,934,S905m

.

SEEK -

S904

S905

S906

S907

R970

R980

R982

R984

R990

Barcode

1

2

19

20

1

1617 32

33

484964

Q901

Q903

IFM1

IFM2

IFM3

IFM4

IFM6

FB901

FB902

FB90

3

R901

R902

R904

R905

R906R907R908

R909

R910

R915

R916

R917

R918

R919

CN901

R922

R923

R924

R925

R926

R927

C901 C902C903

R940

C904

R942

C906

R944C9

09

R948

C910

C911

C912

R950

C915

C916

R956R958

R966

R968

R972

R974

R976R986

R988

R991

R992R993R994R995R996

R997

R998

R999 D9

01

D902

D911

D912

D916

RE901

IC902

CN902

J901

A

MAIN BOARD CN102

KEY BOARD (SIDE A)

KEY BOARD (SIDE B)

1-884-821- (11)

11

1-884-821- (11)

11

LSW912AF/TA/ PTY(AEP, RU, UK)

PTY(EXCEPT AEP, RU, UK)

• : Uses unleaded solder.4-10. PRINTED WIRING BOARD – KEY Section –

(Page 25)

Ver. 1.3

Note 1: Refer to the servicing notes “NOTE FOR REPLACEMENT OF THE USB CONNECTOR (CN902) AND THE AUX JACK (J901)” on page 4, if replacing CN902 and J901.

Note 2: IC901 has been changed in the midway of production. Moreover, the KEY board has been changed simultaneously with it. Before repairing, be sure to refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7.



3232

D

A

9 11

G

C

1 72 10

H

1364

B

E

85

F

I

3 12

BOARD(3/5)

CN102A

MAIN

2.6

5.1

2.6

0.1

0.1

5.1

5.1

5.2

5.1

2.62.62.62.62.62.62.65.23.41.7

2.64.80.13.30.2

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.62.62.62.62.62.62.62.62.62.62.62.62.62.62.6

5.1

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

(AEP,RU,UK)*1

(EXCEPT AEP,RU,UK)

*2

*1

*1

*1

*1*1 *1

*1

*1

*1*1

*1

(AEP,RU,UK)(EXCEPT AEP,RU,UK)

*2

*2

*3

*3

*3*3

*4 *4 *5

*3

*3

*5

*6

*4

*7

*7

*7

*7

*8

*9

(AEP,RU,UK)

(EXCEPT AEP,RU,UK)

(EXCEPT AEP,RU,UK)

*3(AEP,RU,UK)

(AEP,RU,UK)*4

(EXCEPT AEP,RU,UK)

*5

(EXCEPT AEP,RU,UK)(AEP,RU,UK)

(AEP,RU,UK)*6

(EXCEPT AEP,RU,UK)

(AEP,RU,UK)*7

(EXCEPT AEP,RU,UK)

*8


(AEP,RU,UK)*9

(EXCEPT AEP,RU,UK)

IC902

IC901

1MR904

C9040.47

R902150

R901150

R903100

R920820

R9211k

R9221k

R9231.2k

R9241.5k

R9251.8k

2.2kR926

R991820

R9921k

R9931k

R9941.2k

R9951.5k

R9961.8k

R9972.2k

R908120

R909120

R910120

R984

R9190

470R916

470R917

R980

S907

S902

S901

S903

S904

S906

S905

R906

27R9

0727

RT1N140C-TP-1Q901

FB903

FB901

FB902

J901

VCC

OUT

GND

IC902PNJ4813M01S0

LSW9053 1

24

5

6

3 1

24

5

6

3 1

24

5

6

LSW906

LSW907

LSW908

LSW909

LSW910

LSW911

LSW912

1kR998

RKZ6

.8B2

KGP1

D916

RKZ6

.8B2

KGP1

D912

RKZ6

.8B2

KGP1

D911

RT6N140C-TP-1Q903

R944

R9420

0R905

LED9

54

LED9

50LE

D952

LED9

46

LED9

42LE

D944

LED9

38LE

D940

LED9

34LE

D936

LED9

32

R982

R986

R988

R990

R950

R952

R946

R948

R940

R972

R974

R966

R968

R954

R956

R958

1000pC915

1000pC916

20PCN901

1USB_GND2USB_VBUS3D-4D+5GND6KEY_GND7AUX_L8AUX_R9AUX_GND

10RE_011RE_112KEY_113KEY_014SIRCS15LCD_DATA16LCD_CE17LCD_CLK18ILL(FP+B)19PANEL_SW20GND

NESW

505D

T-A0

-UV

LED9

01

D902

RKZ5

.1B2

KGP1

R9180

0R999

0R927

12

34

4PCN902

RE901

R970

0R976

DA2J

1010

0LD9

01

470R915

C910

18p

C909

18p

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

171819202122

29282726252423

303132

33343536373839404142434445464748

49505152535455565758596061626364

LC75839PW-US-HIC901

NCO

BACK

-LIG

HTCO

LOR1

COLO

R2SE

G48

SEG4

7SE

G46

SEG4

5SE

G44

SEG4

3SE

G42

SEG4

1SE

G40

SEG3

9SE

G38

SEG3

7

SEG36SEG35SEG34SEG33SEG32SEG31SEG30SEG29SEG28SEG27SEG26SEG25SEG24SEG23SEG22SEG21

SEG2

0SE

G19

SEG1

8SE

G17

SEG1

6SE

G15

SEG1

4SE

G13

SEG1

2SE

G11

SEG1

0SE

G9SE

G8SE

G7SE

G6SE

G5

SEG4SEG3COM4COM3COM2COM1SEG2VDDVDD1VDD2VSSSEG52INHLCD_CELCD_CLKLCD_DATA

LCD901

15

67

89

1011

1213

1415

1617

1819

2021

2223

2425

2627

2829

3031

3233

3435

3637

3839

4041

4243

4445

4647

4852

24

4951

350

C911

18p

C901 0.1C902 0.1

0.1C903

C9060.1

C912

0.1

S[1]

S[2]COM[1]COM[2]COM[3]COM[4]S[3]S[4]

S[5]

S[6]

S[7]

S[8]

S[9]

S[10

]S[

11]

S[12

]S[

13]

S[14

]S[

15]

S[16

]S[

17]

S[18

]S[

19]

S[20

]

S[21]S[22]S[23]S[24]S[25]S[26]S[27]S[28]S[29]S[30]S[31]S[32]S[33]S[34]S[35]S[36]

S[1]S[2]S[3]S[4]S[5]S[6]S[7]S[8]S[9]

S[10]S[11]S[12]S[13]S[14]S[15]S[16]S[17]S[18]S[19]S[20]S[21]S[22]S[23]S[24]S[25]S[26]S[27]S[28]S[29]S[30]S[31]S[32]S[33]S[34]S[35]S[36]S[37]S[38]S[39]S[40]S[41]S[42]S[43]S[44]S[45]S[46]S[47]S[48]

COM[4]COM[3]COM[2]COM[1]

S[48

]S[

47]

S[46

]S[

45]

S[44

]S[

43]

S[42

]S[

41]

S[40

]S[

39]

S[38

]S[

37]

DATACE

CLK

CECLKDATA

KEY BOARD

VBUS-USB

(USB)

D+D-

GND-USB

SEEK

+

SEEK

-

(ILLUMINATION)LED938,940,942,944

PTY

SOURCE/ OFF

/

OFF

SOUR

CEMO

DE

SELECTPUSH ENTER/

SEEK+

SEEK-

MODE

/ SCRLDSPL

6/PAUSE

5/ZAP

4/SHUF

3/REP

LED DRIVE

LCDBACK LIGHT

DRIVE

(LCD

BAC

K LI

GHT)

REMOTE CONTROLSIGNAL RECEIVER

LCD CONTROL

LIQUIDCRYSTALDISPLAY

PANEL

AUX

2/ALBUM

1/ALBUM

LED932,934,936,938,940,942,944,946,950,952,954SML-D12P8WT86TK

R940,944220820

SML-D12V8WT86TN

AF/TA/ PTY

1k

R946,950,954,956,970,972270

1.2k

R948,952,968330

1.2k

R958,974270

1k

R966330

150

R980,982,984,986100

220

R988150

220

R990180

3 1

24

5

6

3 1

24

5

6

3 1

24

5

6

3 1

24

5

6

3 1

24

5

6

4-11. SCHEMATIC DIAGRAM – KEY Section –

(Page 28)

Ver. 1.3


Note 2: IC901 has been changed in the midway of production. Moreover, the KEY board has been changed simultaneously with it. Before repairing, be sure to refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7.


33

MUTE

MUTE

ENABLELOGIC

STANDBY/MUTE

CHIP DETECT/DIAGNOSTIC

PROTECTION/DIAGNOSTIC

SWITCH

REGU

LATO

R

SWITCH

REFERENCEVOLTAGE

LOAD DUMPPROTECTION

TEMPERATUREPROTECTION

BACK-UPSWITCHREGULATOR

1

3

5

7

9

11

13

15

17

19

21

23

25

27

29

31

33

35

37

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

TAB

OUT-FL–

OUT-FL+

OUT-RL–

OUT-RL+

IN-RL

S-GND

IN-RR

OUT-RR+

OUT-RR–

OUT-FR+

OUT-FR–

DIAG

ANT-REM

AMP-REM

SERVO+3.3V

MECHA+6V

VP

BU+B

I2C_SDA

I2C_SCL

VP2

P-GND1

SVR

IN-FL

IN-FR

BEEP

P-GND3

VP1

STB

P-GND4

RST

CRES

AUDIO+B(8.5V)

GND

PANEL+B

CBU

FL

RL

RR

VP

FR

I2C BUS

IC301 TDF8556AJ/N5 (MAIN board (1/5))

• IC Block Diagrams

Ver. 1.4


34

1CONT

2GND

3NC

VOUT4

VIN5

CURRENTLIMIT

THERMALSHUTDOWN

BIAS

VREF

IC402 MM1836A333NRE (MAIN board (1/5))


35

IC1300 OZ539IGN-A1-0-TR (MAIN board (2/5))

VSSEL

CHARGEPUMP

SQ

S

REFERENCEGENERATOR

OSCILLATOR

ADJGENERATOR

VOUT_SYS(USBIN)FAULT PROTECTION

BST

EN_SYS 4

USB_OUT 5

VIN 3

LX 2

1

2VUVLS

FB_US 6

USB_IN 7

SYNC 8

RT15

SS_SYS13

EN_USB12

VIC_USB11

ISET_USB10

FLT_USB9

GNDA14

VREF16

HDR

OCP

OVER-CURRENTLIMIT

OVER-CURRENTLIMIT

OVER-CURRENTLIMIT

USB FAULTPROTECTION

5

VDD

4

VOUT

2

GND

3

NC

1

CE

BANDGAPREFERENCE

THERMALPROTECTION

IC681 NJM2878F3-15 (TE2) (MAIN board (5/5))

Ver. 1.4


36

IC401 BD3467FV-E2 (MAIN board (3/5))

BUS_LCH 1

INPU

T SE

LECT

OR(2

SIN

GLE-

END

AND

4 STE

REO

ISO)

MUTE

MAIN

GAI

NAD

JUST

SUB

GAIN

ADJU

ST

I2CBUS

LOGIC

2ND

ORDE

R LO

W-P

ASS

FILT

ER

INPU

T GA

IN

AU_OUT_SL40

BUS_RCH 2

NCO 3

NCO 4

TU_LCH 5

TU_GND 6

TU_RCH 7

ISOGND

AMP

ISOGND

AMP

AUX_LCH 8

AUX_GND 9

AUX_RCH 10

ISOGND

AMP

ISOGND

AMP

XM_LCH 11

XM_GND 12

XM_RCH 13

ISOGND

AMP

ISOGND

AMP

FP1 14

FN1 15

ISOGND

AMP

FN2 16

FP2 17

NCO 18

NCO 19

NCO 20

ISOGND

AMP

AU_OUT_SR39

AU_OUT_RL38

AU_OUT_RR37

AU_OUT_FL36

AU_OUT_FR35

AU_IN_FR34

AU_OUT_LCH28

AU_OUT_RCH27

VCC (8.5V)26

AU_IN_FL33

AU_IN_RR32

AU_IN_RL31

AU_IN_SUB30

NCO29

FADER ATT

FADER ATT

FADER ATT

FADER ATT

FADER ATT

FADER ATT

FADERBOOST

FADERBOOST

FADERBOOST

FADERBOOST

FADERBOOST

FADERBOOST

+

+

VCC

FIL25GND24

I2C_SDA23I2C_SCL22MUTE21


37

• IC Pin Function Description

MAIN BOARD (2/5) IC501 R5F3650KBDZ78FA (SYSTEM CONTROL) (Former type)MAIN BOARD (2/5) IC501 R5F3650KBDZ75FA (SYSTEM CONTROL) (New type)

Pin No. Pin Name I/O Description1 LCD_SO O Serial data output for LCD driver2 LCD_CLK O Serial clock signal output for LCD driver3 NOSE_SW I Front panel detach/attach detect input “L”: With panel, “H”: Without panel4 SIRCS I Remote control signal (infrared) input5 UNISO O SONY BUS serial data output6 UNISI I SONY BUS serial data input7 UNISCK O SONY BUS serial clock signal output8 BYTE I External data bus width select signal input (Connect to VSS in this set)9 CNVSS I Flash writer IF (CNVSS) signal input (L: normally operation, H: fl ash write)10 XIN I Low speed operation clock signal input (32.768 kHz)11 XOUT O Low speed operation clock signal output (32.768 kHz)12 RESET I System reset signal input13 OSCOUT O High speed operation clock signal output (7.92 MHz)14 VSS ― Ground terminal15 OSCIN I High speed operation clock signal input (7.92 MHz)16 VCC1 ― Power supply terminal (+3.3 V)17 NMI I Non-maskable interrupt signal input (Fixed at H in this set)18 RC_IN1 I Rotary commander shift key signal input19 BUIN I Backup power supply detect signal input20 SYSRST O System reset signal output21 BUS_ON O VBUS power control signal output22 MC_RX I MC-BUS communication MECHA (MG-101CA) TX signal input23 DOOR_SW O Not used. (Open)24 MC_TX O MC-BUS communication MECHA (MG-101CA) RX signal output25 DOOR_ING O Not used. (Open)26 SYNC_OUT O DD converter frequency control signal output27 EJECT_OK O Not used. (Open)28 BEEP O Beep signal output for the power amplifi er IC29 I2C_SCL O IIC communication serial clock signal output30 I2C_SDA I/O IIC communication serial data input/output31 FW_TXD O Flash writer IF (serial data) output32 FW_RXD I Flash writer IF (serial data) input33 FW_CLK I Flash writer IF (serial clock) signal input34 FW_BUSY O Flash writer IF (busy) signal output35 XM_TX O Not used. (Open)36 XM_RX O Not used.37 XM_POWER EN O Not used.38 CD_ON I CD mechanism servo power supply control request signal input39 CDM_ON I CD mechanism deck power supply control request signal input40 WAKE_UP O CD mechanism deck micon wake up signal output41 EPM O EPM signal output (Fixed at L in this set)42 Z_MUTE I Z mute signal input43 R/S SW_SEL O Not used. (Open)44 EQ_TYPE__SEL O Not used. (Open)45 INITCOL_SEL O Not used. (Open)46 CE O CE signal output (Fixed at H in this set)47 HIT2_SDA I/O Tuner serial data input/output48 HIT2_SCL O Tuner serial clock output49 HIT2_RESET O Tuner reset signal output50 EN_USB O USB over current detect IC control signal output51 VBUS_ON I VBUS power supply control signal input (L: VBUS OFF, H: VBUS ON)52 FLT_USB I USB over current detect signal input53 EN_SYS O Power control DC/DC signal output54 IPOD O iPod connection mode signal output

Ver. 1.3

Note: Refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7 for New/Former types of IC501.


38

Pin No. Pin Name I/O Description

55 EXTATT_XEN O External mute control signal output“L”: CD or USB source is selected, “H”: Other source is selected

56 TELATT I Telephone attenuator detect signal input (Fixed at L in this set)57 ACC_IN I Accessory power supply detect signal input58 ATT O Audio mute control signal output59 DIAG I Condition signal input from power amp IC60 AMPSTB O Standby signal output for power regulator IC

61 CYRIL_SEL I Cyril correspondance discrimination signal input (L: No correspondance) (Fixed at L in this set)

62 VCC2 ― Power supply terminal (+3.3 V)63 F_AUX_ATT O Not used. (Open)64 VSS ― Ground terminal65 ILLUMI SEL I Key illumination voltage setting signal input Not used. (Open)66 COLSW SEL I Key illumination color change function signal input Not used. (Open)67 BT_MUTE O Not used. (Open)68 B-OUT SEL I Black out function setting signal input (L: without black out function) Not used. (Open)69 AREASEL3 I Destination setting pin 3 Not used. (Open)70 AREASEL2 I Destination setting pin 2 Not used. (Open)71 AREASEL1 I Destination setting pin 1 Not used. (Open)72 AREASEL0 I Destination setting pin 0 Not used. (Open)73 MODELNAME_SEL0 O Not used. (Open)74 MODELNAME_SEL1 O Not used. (Open)75 MODELNAME_SEL2 O Not used. (Open)76 MODELNAME_SEL3 O Not used. (Open)77 BT_TX O Not used. (Open)78 BT_RX O Not used. (Open)

79, 80 DEBUG_1, DEBUG_2 O Not used. (Open)81 RE-IN1 I Rotary encoder signal input 182 RE-IN0 I Rotary encoder signal input 083 ILL_IN O Not used. (Open)84 BT_RTS O Not used. (Open)85 BT_CTS O Not used. (Open)86 BT_RESET O Not used. (Open)87 BT_POWER O Not used. (Open)88 BT_MIC_DET O Not used. (Open)89 SA_DATA I Mechnism serial data input90 SA_CLK O Mechnism serial clock output91 KEYACK0 I Key acknowledge detect signal input (Rotary commander)92 KEYACK1 I Key acknowledge detect signal input (Front panel)93 BT_MIC_ON O Not used. (Open)94 KEYIN1 I Key signal input 195 KEYIN0 I Key signal input 096 AVSS ― Ground terminal for A/D converter97 RC_IN0 I Rotary commander key signal input98 AVRH ― A/D converter external reference power supply terminal (+3.3 V)99 AVDD ― A/D converter power supply terminal (+3.3 V)100 LCD_CE O Chip enable signal output for LCD driver


39

MAIN BOARD (4/5) IC701 TC94A99FG-003 (SY) (DIGITAL SIGNAL PROCESSOR)Pin No. Pin Name I/O Description

1 LPFO O Signal output from the operation amplifi er for PLL loop fi lter2 PVREF I Reference voltage (+1.65V) input terminal3 VCOF O Terminal for VCO fi lter4 RVSS3 ― Ground terminal5 VCOI I DSP VCO control voltage input terminal6 RVDD3 ― Power supply terminal (+3.3V)7 SLCO O EFM slice level output terminal8 RFI I RF signal input terminal9 RFRPI I RF ripple signal input terminal10 RFEQO O EFM slice level output terminal11 DCOFC O DCOFC signal output12 AGCI I RF signal amplitude adjustment amplifi cation input terminal13 RFO O RF signal generation amplifi cation output terminal14 RVSS3 ― Ground terminal15 FNI2 I Main beam input terminal (Connect with pin diode C)16 FNI1 I Main beam input terminal (Connect with pin diode A)17 FPI2 I Main beam input terminal (Connect with pin diode D)18 FPI1 I Main beam input terminal (Connect with pin diode B)19 VDD1-1 ― Power supply terminal (+1.5V)20 TPI I Sub beam amplifi cation input terminal (Connect with pin diode F)21 TNI I Sub beam amplifi cation input terminal (Connect with pin diode E)22 VRO O Reference voltage (+1.65V) output terminal23 AVSS3 ― Ground terminal24 MDI I Monitor photo diode amplifi cation input terminal25 LDO O Laser diode amplifi cation output terminal26 FSMONIT ― Not used. (Open)27 RFZI I RF ripple zero crossing signal input terminal28 RFRP O RF ripple signal output terminal29 TEI I Tracking error signal input terminal30 AVDD3 ― Power supply terminal (+3.3V)31 FOO O Focus servo equalizer signal output terminal32 TRO O Tracking servo equalizer signal output terminal33 VSS-1 ― Ground terminal34 FMO O Feeding servo equalizer signal output terminal35 DMO O Disc servo equalizer signal output terminal36 VDDM1 ― Power supply terminal (+1.5V)37 /SRAMSTB I Strobe signal input from the USB controller “L”: standby mode38 VDD1-2 ― Power supply terminal (+1.5V)39 VDD3-1 ― Power supply terminal (+3.3V)40 CD-MON2/PIO10 ― Not used. (Open)41 CD-MON3/PIO11 ― Not used. (Open)42 PIO12/DT/BT_DATAi ― Not used. (Open)43 PIO13/DT/BT_BCKi ― Not used. (Open)44 PIO14/DT/BT_LRCKi ― Not used. (Open)

45 to 47 PIO15/SDo0 to PIO17/SDo2 ― Not used. (Open)

48 PIO18/LRCKo ― Not used. (Open)49 PIO19/BCKo ― Not used. (Open)50 PIO20/CKo ― Not used. (Open)51 DVDD12 ― Power supply terminal (+3.3V)52 DAO1 (R_R-CH) O R_R channel data output terminal53 DVSS12 ― Ground terminal54 DAO2 (F_R-CH) O F_R channel data output terminal55 DVREF ― Reference voltage input terminal56 DVDD34 ― Power supply terminal (+3.3V)57 DAO3 (F_L-CH) O F_L channel data output terminal58 DVSS34 ― Ground terminal59 DAO4 (R_L-CH) O R_L channel data output terminal60 DVDD5 ― Power supply terminal (+3.3V)


40

Pin No. Pin Name I/O Description61 DAO5 (SUB-CH) O SUB channel data output terminal62 DVSS5 ― Ground terminal63 VDD1-3 ― Power supply terminal (+1.5V)64 VSS-2 ― Ground terminal65 XVSS3 ― Ground terminal66 XI I System clock input terminal (16.9344 MHz)67 XO O System clock output terminal (16.9344 MHz)68 XVDD3 ― Power supply terminal (+3.3V)69 ADVDD3 ― Power supply terminal (+3.3V)70 ADIN1 (IN_L-CH) I Audio signal input terminal (L channel)71 ADVREFL O Reference voltage output terminal72 ADVCM O Reference voltage output terminal73 ADVREFH O Reference voltage output terminal74 ADIN2 (IN_R-CH) I Audio signal input terminal (R channel)75 ADVSS3 ― Ground terminal76 MS I I/F mode selection signal input terminal Fixed at “L” in this set77 BUS0 I/O Bus data input/output with the USB controller78 BUS1 I/O Bus data input/output with the USB controller79 BUS2/So O Serial data output to the USB controller80 BUS3/Si I Serial data input from the USB controller81 BUCK/SCL I Bus clock signal input from the USB controller82 /CCE I Chip enable signal input from the USB controller83 VDD3-2 ― Power supply terminal (+3.3V)84 VSS-3 ― Ground terminal85 /RST I Reset signal input from the system controller86 VDD1-4 ― Power supply terminal (+1.5V)87 DEC_REQ O Request signal output to the USB controller88 BSIF-REQ O Request signal output to the USB controller89 BSIF-GATE I Gate signal input from the USB controller90 BSIF_DATA I Audio data input from the USB controller91 BSIF_BCK I Bit clock signal input from the USB controller92 BSIF_LRCK I L/R sampling clock signal (44.1 kHz) input terminal for audio data input93 DEC_XMUTE I Muting on/off control signal input from the USB controller94 ZDET O Zero detection signal output terminal95 CD MON0/SP_DATA O Spectrum analyzer data output to the USB controller96 CD MON1/SP_CLK I Spectrum analyzer data transfer clock signal input from the USB controller97 TEST I Setting terminal for test mode Normally fi xed at “L”98 PDO O Phase error margin signal between EFM signal and PLCK signal output terminal99 TMAX O TMAX detection result output terminal100 LPFN I Inverted signal input from the operation amplifi er for PLL loop fi lter


41

MAIN BOARD (5/5) IC601 M321FEFG-7KN3 (SY (USB CONTROL)Pin No. Pin Name I/O Description

1 AVSS ― Ground terminal for A/D converter2 VREFH ― Reference power supply terminal for A/D converter3 RESET I Reset signal input4 MODE I Mode signal input5 OPEN REQ O Not used. (Open)6 EJECT OK I Front panel open eject signal input7 NC ― Not used. (Open)8 WAKE UP I Wake up request signal input

9 to 11 NC ― Not used. (Open)12 BU_IN I Back up signal input13 DVSS ― Ground terminal14 NC ― Not used. (Open)15 CD_ZDET I Zero detection signal input16 DEC_XMUTE O Muting on/off control signal output17 DEC_LRCK O L/R sampling clock signal(44.1kHz) output18 DEC_BCK O Bit clock signal output19 DEC_DATA O Audio data signal output20 DEC_GATE O Gate signal output21 DEC_REQ I Request signal input22 CD_SO O Serial data output23 CD_SI I Serial data input24 CD_SCLK O Serial clock output25 MEC_SELFSW I Mechanism self switch signal input26 NC ― Not used. (Open)27 DEC_INT I Request signal input28 CD_XRST O CD reset signal output29 CD_XCCE O Chip enable signal output

30,31 NC ― Not used. (Open)32 Z/Y_CHECK ― Not used. (Open)33 DVCC3 ― Power supply terminal34 DVSS ― Ground terminal35 DRV_ON O Motor drive on/off control signal output36 MEC_LOAD O Mechanism loading signal output(Load)37 MEC_EJECT O Mechanism eject signal output(Eject)38 MEC_SSTBY O Strobe standby signal output39 MEC_LIMIT I Mechanism deck sled limit in detection signal input40 MEC_INSW I Mechanism deck pack in detection signal input41 MEC_DSW I Mechanism deck chacking end detection signal input

42,43 NC ― Not used. (Open)44 XLINE ― Not used. (Open)45 XINTIO ― Not used. (Open)46 FE/SBAD_SEL ― Not used. (Open)47 Z/Y_SEL ― Not used. (Open)48 NC ― Not used. (Open)49 MECON_CHECK I Mechanism on/off check signal input50 CDON_CHECK I CD on/off check signal input51 A_ATT O Audio attenuation signal output52 MECON O Mechanism power supply (+6V) control signal output53 CDON O CD power supply (+3.3V) control signal output54 ZMUTE O Zero mute signal output55 TXD O Mechanism TX signal output56 RXD I Mechanism RX signal input

57,58 NC ― Not used. (Open)59 DVCC3 ― Power supply terminal60 DVSS ― Ground terminal61 SWDIO I/O Flash write SWDIO signal input/output62 SWCLK I/O Flash write SWCLK signal input/output63 TRACECLK ― Not used. (Open)64 TRACEDATA0 ― Not used. (Open)

Ver. 1.4


42

Pin No. Pin Name I/O Description65 TRACEDATA1 ― Not used. (Open)66 TRACEDATA2 ― Not used. (Open)67 TRACEDATA3 ― Not used. (Open)68 CP_SDA I/O CP serial data input/output69 CP_SCL O CP serial clock output70 NC ― Not used. (Open)71 CP_RESET O CP reset signal output72 CPON O CP power supply control signal output73 CDON_15V O Servo power supply (+1.5V) control signal output74 VBUS_ON O USB VBUS control signal output75 NC ― Not used. (Open)76 REGVCC3 ― Power supply terminal77 XT1 ― Not used. (Fixed at L.)78 XT2 ― Not used. (Open)79 CVCC3 ― Power supply terminal80 X1 I System clock input terminal(12MHz)81 CVSS ― Ground terminal82 X2 O System clock input terminal(12MHz)83 DVCC3 ― Power supply terminal84 DVSS ― Ground terminal85 USB+ I/O USB serial data input/output +86 USB- I/O USB serial data input/output -87 NMI I Non-maskable interrupt signal input(Fixed at H).

88,89 TEST ― Not used. (Open)90,91 NC ― Not used. (Open)

92 AVCC3 ― Power supply terminal93 to 100 NC ― Not used. (Open)

43

CDX-GT40U/GT40UW/GT42UE/GT44U/GT45U/GT47UESECTION 5

EXPLODED VIEWS

1 X-2581-176-3 PANEL ASSY, SUB 2 3-042-244-11 SCREW (T) 3 X-2547-583-3 LOCK ASSY (T) 4 4-410-504-01 SCREW (+PTT 2.6X6), GROUND POINT 5 A-1831-756-A MAIN BOARD, COMPLETE

(EXCEPT AEP, RU, UK, EA) (Former type)

5 A-1831-756-B MAIN BOARD, COMPLETE(EXCEPT AEP, RU, UK, EA) (New type)

5 A-1831-772-A MAIN BOARD, COMPLETE (AEP, UK) (Former type) 5 A-1831-772-B MAIN BOARD, COMPLETE (AEP, UK) (New type) 5 A-1832-546-A MAIN BOARD, COMPLETE (RU) (Former type) 5 A-1832-546-B MAIN BOARD, COMPLETE (RU) (New type)

5 A-1851-887-A MAIN BOARD, COMPLETE (EA) (Former type)

5 A-1851-887-B MAIN BOARD, COMPLETE (EA) (New type) 6 1-839-372-11 CONNECTION CORD FOR AUTOMOBILE

(POWER) (US, CND, E, EA, MX, KR, IND) 6 1-839-387-11 CONNECTION CODE (ISO) (POWER)

(AEP, RU, UK, AR) FU601 1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) (10 A/32 V)

TU901 A-1878-198-A TUX-DSP02 (TUNER UNIT) #1 7-685-792-09 SCREW +PTT 2.6X6 (S) #2 7-685-790-01 SCREW +PTT 2.6X4 (S) #3 7-685-793-01 SCREW +PTT 2.6X8 (S) #4 7-685-794-01 SCREW +PTT 2.6X10 (S)

#5 7-685-134-19 SCREW +P 2.6X8 TYPE2 NON-SLIT

Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark

Note:• -XX and -X mean standardized parts, so

they may have some difference from the original one.

• Items marked “*” are not stocked since they are seldom required for routine ser-vice. Some delay should be anticipated when ordering these items.

• The mechanical parts with no reference number in the exploded views are not sup-plied.

• Color Indication of Appearance Parts Ex-ample:

KNOB, BALANCE (WHITE) . . . (RED) Parts Color Cabinet’s Color• Accessories are given in the last of the

electrical parts list.• Abbreviation AR : Argentina model CND : Canadian model EA : Saudi Arabia model IND : Indian model

not supplied

not supplied

TU901

FU601

not supplied

front panel section

#1

#1

#1

#1

#3#4

#4#5

#5

#3

#2

#2

#1

B

B

1

2

3

6

5

not supplied

not supplied

not supplied

4

MAIN board

A

A

CD mechanism section(MG-101CA-188)

Ver. 1.4

Note 1: When the complete MAIN board is replaced, the destination setting is necessary. Refer to “NOTE THE MAIN BOARD OR SYSTEM CONTROLLER (IC501) REPLACING” on page 5.

Note 2: COMPLETE MAIN BOARD (Ref. No. 5) has been changed in the midway of production. When COMPLETE MAIN BOARD (Ref. No. 5) is replaced, be sure to refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7.

5-1. MAIN SECTION

KR : Korean model MX : Mexican model RU : Russian model

The components identifi ed by mark 0 or dotted line with mark 0 are critical for safety.Replace only with part number specifi ed.

Les composants identifi és par une marque 0 sont critiques pour la sécurité.Ne les remplacer que par une pièce por-tant le numéro spécifi é.

44


LCD901

J901CN902

RE901

IC902

not supplied

not supplied

not supplied(KEY board)

51

52

5354

5657

58

59

60

55

6162

63 64

64

65

66

5-2. FRONT PANEL SECTION


51 4-183-276-01 BUTTON (EJECT) 52 4-183-275-03 BUTTON (PRESET) (AEP, RU, UK) 52 4-183-275-13 BUTTON (PRESET) (EXCEPT AEP, RU, UK) 53 4-183-273-11 BUTTON (EQ3) 54 4-183-274-01 BUTTON (RELEASE)

55 2-639-881-01 SPRING (RELEASE) 56 X-2581-888-1 PANEL (SV) ASSY, FRONT (GT40U: US, CND) 56 X-2581-889-1 PANEL (SV) ASSY, FRONT (GT40UW) 57 X-2581-858-1 KNOB (VOL) (SV) ASSY 58 4-183-271-02 BUTTON (MODE)

59 4-183-272-31 BUTTON (BACK) 60 4-183-270-02 BUTTON (SOURCE) 61 1-780-968-11 CONDUCTIVE BOARD, CONNECTION 62 4-278-080-01 ILLUMINATOR (LCD) 63 4-279-394-01 PANEL, BACK

64 3-250-543-21 SCREW (+B P-TITE M2) 65 X-2187-544-5 CASE ASSY (for FRONT PANEL)

(GT42UE/GT44U: IND/GT45U) 66 A-1831-758-A PANEL OVERALL ASSY, FRONT

(GT40U: US, CND) (Former type) 66 A-1831-758-B PANEL OVERALL ASSY, FRONT

(GT40U: US, CND) (New type) 66 A-1831-765-A PANEL OVERALL ASSY, FRONT (GT40UW)

(Former type)

66 A-1831-765-B PANEL OVERALL ASSY, FRONT (GT40UW) (New type)

66 A-1831-774-A PANEL OVERALL ASSY, FRONT (GT40U: RU) (Former type)

66 A-1831-774-B PANEL OVERALL ASSY, FRONT (GT40U: RU)(New type)

66 A-1831-783-A PANEL OVERALL ASSY, FRONT (GT45U: E, EA, AR) (Former type)

66 A-1831-783-B PANEL OVERALL ASSY, FRONT (GT45U: E, EA, AR) (New type)

66 A-1831-789-A PANEL OVERALL ASSY, FRONT (GT44U: IND) (Former type)

66 A-1831-789-B PANEL OVERALL ASSY, FRONT (GT44U: IND) (New type)

66 A-1831-795-A PANEL OVERALL ASSY, FRONT (GT44U: AEP, UK) (Former type)

66 A-1831-795-B PANEL OVERALL ASSY, FRONT (GT44U: AEP, UK) (New type)

66 A-1831-800-A PANEL OVERALL ASSY, FRONT (GT47UE) (Former type)

66 A-1831-800-B PANEL OVERALL ASSY, FRONT (GT47UE) (New type)





66 A-1847-849-A PANEL OVERALL ASSY, FRONT (GT45U: MX) (Former type)

66 A-1847-849-B PANEL OVERALL ASSY, FRONT (GT45U: MX) (New type)

66 A-1850-669-A PANEL OVERALL ASSY, FRONT (GT45U: KR) (Former type)

66 A-1850-669-B PANEL OVERALL ASSY, FRONT (GT45U: KR) (New type)

CN902 1-822-798-11 USB CONNECTOR (USB)

IC902 6-600-806-01 IC PNJ4813M01S0 J901 1-822-148-11 SMALL TYPE JACK (VERTICAL) (AUX) LCD901 1-811-224-11 DISPLAY PANEL, LIQUID CRYSTAL RE901 1-487-023-22 ROTARY ENCODER (PUSH SELECT (VOLUME))

Ver. 1.3

Note 1: FRONT PANEL OVERALL ASSY (Ref. No. 66) has been changed in the midway of production. When FRONT PANEL OVERALL ASSY (Ref. No. 66) is replaced, be sure to refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7.

Note 2: Refer to the servicing notes “NOTE FOR RE-PLACEMENT OF THE USB CONNECTOR (CN902) AND THE AUX JACK (J901)” on page 4, if replacing CN902 and J901.

45



5-3. CD MECHANISM SECTION (MG-101CA-188)

101 A-1313-179-A MECHANICAL BLOCK (Z) ASSY 08 (Former type) 101 A-1866-801-A MECHANICAL BLOCK (11CA) ASSY (New type)0 102 A-1284-705-A DAXEV08//Q0 103 X-2149-672-1 SERVICE ASSY, OP (DAX-25A) 104 2-626-869-31 SCREW (M2X3), SERRATION

105 3-686-458-21 SCREW (P1.4), TAPPING 106 3-352-758-31 SCREW (M1.7X2.5), TOOTHED LOCK 107 A-1823-723-A SERVO BOARD, COMPLETE (Former type) 107 A-1866-089-A SERVO BOARD, COMPLETE (New type) 108 2-134-636-71 SCREW (M1.7X2.5)

not supplied

SENSOR board

notsupplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

not supplied

101 102

103

105

104

107

106106

108

108

Note: As for the mechanism deck (MG-101CA-188) carried in this unit, component parts have been changed from the midway of production. When you perform repair exchange of the mechanism deck (MG-101CA-188), refer to “ABOUT THE MG-101CA-188 OF FORMER AND NEW” on page 6.

Ver. 1.3

46


LED936 6-502-325-11 LED SML-D12P8WT86TK (SEEK+ > M) (AEP, RU, UK)

LED938 6-502-193-11 LED SML-D12V8WT86TN (ILLUMINATION) (EXCEPT AEP, RU, UK)

LED938 6-502-325-11 LED SML-D12P8WT86TK (ILLUMINATION) (AEP, RU, UK)







LED946 6-502-193-11 LED SML-D12V8WT86TN (Z) (EXCEPT AEP, RU, UK)

LED946 6-502-325-11 LED SML-D12P8WT86TK (Z) (AEP, RU, UK) LED950 6-502-193-11 LED SML-D12V8WT86TN (SOURCE/OFF)

(EXCEPT AEP, RU, UK) LED950 6-502-325-11 LED SML-D12P8WT86TK (SOURCE/OFF)

(AEP, RU, UK) LED952 6-502-193-11 LED SML-D12V8WT86TN (MODE)

(EXCEPT AEP, RU, UK)

LED952 6-502-325-11 LED SML-D12P8WT86TK (MODE) (AEP, RU, UK) LED954 6-502-193-11 LED SML-D12V8WT86TN ( )

(EXCEPT AEP, RU, UK) LED954 6-502-325-11 LED SML-D12P8WT86TK ( ) (AEP, RU, UK)

< SWITCH >

LSW905 1-798-283-11 TACTILE SWITCH (WITH LED) (DSPL/SCRL) (AEP, RU, UK)

LSW905 1-798-287-11 TACTILE SWITCH (WITH LED) (DSPL/SCRL) (EXCEPT AEP, RU, UK)

LSW906 1-798-283-11 TACTILE SWITCH (WITH LED) (6/PAUSE) (AEP, RU, UK)

LSW906 1-798-287-11 TACTILE SWITCH (WITH LED) (6/PAUSE) (EXCEPT AEP, RU, UK)

LSW907 1-798-283-11 TACTILE SWITCH (WITH LED) (5/ZAP) (AEP, RU, UK)

LSW907 1-798-287-11 TACTILE SWITCH (WITH LED) (5/ZAP) (EXCEPT AEP, RU, UK)

LSW908 1-798-283-11 TACTILE SWITCH (WITH LED) (4/SHUF) (AEP, RU, UK)

LSW908 1-798-287-11 TACTILE SWITCH (WITH LED) (4/SHUF) (EXCEPT AEP, RU, UK)

SECTION 6ELECTRICAL PARTS LIST

KEY BOARD **********

< CAPACITOR >

C901 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C902 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C903 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C904 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10V C906 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V

C909 1-162-918-11 CERAMIC CHIP 18PF 5% 50V C910 1-162-918-11 CERAMIC CHIP 18PF 5% 50V C911 1-162-918-11 CERAMIC CHIP 18PF 5% 50V C912 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C915 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V

C916 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V

< CONNECTOR >

CN901 1-842-265-22 PLUG, CONNECTOR 20P

< DIODE >

D901 6-502-961-01 DIODE DA2J10100L D902 6-503-202-01 DIODE RKZ5.1B2KGP1 D911 6-503-205-01 DIODE RKZ6.8B2KGP1 D912 6-503-205-01 DIODE RKZ6.8B2KGP1 D916 6-503-205-01 DIODE RKZ6.8B2KGP1

< FERRITE BEAD >

FB901 1-414-385-21 INDUCTOR, FERRITE BEAD FB902 1-414-385-21 INDUCTOR, FERRITE BEAD FB903 1-414-385-21 INDUCTOR, FERRITE BEAD

< IC >

IC901 6-717-496-01 IC LC75839PW-US-H

< LED >

LED901 6-503-227-01 LED NESW505DT-A0-UV (LCD BACK LIGHT) LED932 6-502-193-11 LED SML-D12V8WT86TN ( )

(EXCEPT AEP, RU, UK) LED932 6-502-325-11 LED SML-D12P8WT86TK ( ) (AEP, RU, UK) LED934 6-502-193-11 LED SML-D12V8WT86TN (m . SEEK –)

(EXCEPT AEP, RU, UK) LED934 6-502-325-11 LED SML-D12P8WT86TK (m . SEEK –)

(AEP, RU, UK)

LED936 6-502-193-11 LED SML-D12V8WT86TN (SEEK+ > M) (EXCEPT AEP, RU, UK)


KEY

Note:• Due to standardization, replacements in

the parts list may be different from the parts specifi ed in the diagrams or the com-ponents used on the set.

• -XX and -X mean standardized parts, so they may have some difference from the original one.


• RESISTORS All resistors are in ohms. METAL: Metal-fi lm resistor. METAL OXIDE: Metal oxide-fi lm resistor. F: nonfl ammable

• CAPACITORS uF: μF• COILS uH: μH• SEMICONDUCTORS In each case, u: μ, for example: uA. . : μA. . , uPA. . , μPA. . , uPB. . : μPB. . , uPC. . , μPC. . , uPD. . : μPD. .• Abbreviation AR : Argentina model CND : Canadian model EA : SaudI Arabia model IND : Indian model KR : Korean model MX : Mexican model

When indicating parts by reference num-ber, please include the board name.

The components identifi ed by mark 0 or dotted line with mark 0 are critical for safety.Replace only with part number specifi ed.

Les composants identifi és par une marque 0 sont critiques pour la sécurité.Ne les remplacer que par une pièce por-tant le numéro spécifi é.

Ver. 1.3

RU : Russian model

Note: IC901 has been changed in the midway of production. Moreover, the KEY board has been changed simultaneously with it. Before repairing, be sure to refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7.



47

LSW909 1-798-283-11 TACTILE SWITCH (WITH LED) (3/REP) (AEP, RU, UK)

LSW909 1-798-287-11 TACTILE SWITCH (WITH LED) (3/REP) (EXCEPT AEP, RU, UK)

LSW910 1-798-283-11 TACTILE SWITCH (WITH LED) (2/ALBUM v) (AEP, RU, UK)

LSW910 1-798-287-11 TACTILE SWITCH (WITH LED) (2/ALBUM v) (EXCEPT AEP, RU, UK)

LSW911 1-798-283-11 TACTILE SWITCH (WITH LED) (1/ALBUM V) (AEP, RU, UK)

LSW911 1-798-287-11 TACTILE SWITCH (WITH LED) (1/ALBUM V) (EXCEPT AEP, RU, UK)

LSW912 1-798-283-11 TACTILE SWITCH (WITH LED) (AF/TA/PTY) (AEP, RU, UK)

LSW912 1-798-287-11 TACTILE SWITCH (WITH LED) (PTY) (EXCEPT AEP, RU, UK)

< TRANSISTOR >

Q901 8-729-038-22 TRANSISTOR RT1N140C-TP-1 Q903 6-551-392-01 TRANSISTOR RT6N140C-TP-1

< RESISTOR >

R901 1-216-811-11 METAL CHIP 150 5% 1/10W R902 1-216-811-11 METAL CHIP 150 5% 1/10W R903 1-216-809-11 METAL CHIP 100 5% 1/10W R904 1-216-857-11 METAL CHIP 1M 5% 1/10W R905 1-216-864-11 SHORT CHIP 0

R906 1-216-802-11 METAL CHIP 27 5% 1/10W R907 1-216-802-11 METAL CHIP 27 5% 1/10W R908 1-216-810-11 METAL CHIP 120 5% 1/10W R909 1-216-810-11 METAL CHIP 120 5% 1/10W R910 1-216-810-11 METAL CHIP 120 5% 1/10W

R915 1-216-817-11 METAL CHIP 470 5% 1/10W R916 1-216-817-11 METAL CHIP 470 5% 1/10W R917 1-216-817-11 METAL CHIP 470 5% 1/10W R918 1-216-864-11 SHORT CHIP 0 R919 1-216-864-11 SHORT CHIP 0

R920 1-216-820-11 METAL CHIP 820 5% 1/10W R921 1-216-821-11 METAL CHIP 1K 5% 1/10W R922 1-216-821-11 METAL CHIP 1K 5% 1/10W R923 1-216-822-11 METAL CHIP 1.2K 5% 1/10W R924 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

R925 1-216-824-11 METAL CHIP 1.8K 5% 1/10W R926 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R927 1-216-295-91 SHORT CHIP 0 R940 1-216-813-11 METAL CHIP 220 5% 1/10W

(AEP, RU, UK) R940 1-216-820-11 METAL CHIP 820 5% 1/10W


R942 1-216-864-11 SHORT CHIP 0 R944 1-216-813-11 METAL CHIP 220 5% 1/10W


(EXCEPT AEP, RU, UK) R946 1-216-814-11 METAL CHIP 270 5% 1/10W

(AEP, RU, UK) R946 1-216-821-11 METAL CHIP 1K 5% 1/10W


R948 1-216-815-11 METAL CHIP 330 5% 1/10W (AEP, RU, UK)

R948 1-216-822-11 METAL CHIP 1.2K 5% 1/10W (EXCEPT AEP, RU, UK)


R950 1-216-821-11 METAL CHIP 1K 5% 1/10W (EXCEPT AEP, RU, UK)























R982 1-216-811-11 METAL CHIP 150 5% 1/10W (EXCEPT AEP, RU, UK)









KEYVer. 1.2



48


R996 1-216-824-11 METAL CHIP 1.8K 5% 1/10W R997 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R998 1-216-821-11 METAL CHIP 1K 5% 1/10W R999 1-216-295-91 SHORT CHIP 0

< SWITCH >

S901 1-798-284-11 TACTILE SWITCH (Z) S902 1-798-284-11 TACTILE SWITCH (SOURCE/OFF) S903 1-798-284-11 TACTILE SWITCH (SEEK+ > M) S904 1-798-284-11 TACTILE SWITCH ( ) S905 1-798-284-11 TACTILE SWITCH (m . SEEK –)

S906 1-798-284-11 TACTILE SWITCH ( ) S907 1-798-284-11 TACTILE SWITCH (MODE)*************************************************************

A-1831-756-A MAIN BOARD, COMPLETE (EXCEPT AEP, RU, UK, EA) (Former type)

A-1831-756-B MAIN BOARD, COMPLETE (EXCEPT AEP, RU, UK, EA) (New type)

A-1831-772-A MAIN BOARD, COMPLETE (AEP, UK) (Former type) A-1831-772-B MAIN BOARD, COMPLETE (AEP, UK) (New type) A-1832-546-A MAIN BOARD, COMPLETE (RU) (Former type)

A-1832-546-B MAIN BOARD, COMPLETE (RU) (New type) A-1851-887-A MAIN BOARD, COMPLETE (EA) (Former type) A-1851-887-B MAIN BOARD, COMPLETE (EA) (New type) *********************

7-685-134-19 SCREW +P 2.6X8 TYPE2 NON-SLIT 7-685-794-01 SCREW +PTT 2.6X10 (S)

< CAPACITOR >

C10 1-100-591-91 CERAMIC CHIP 1uF 10% 25V C11 1-137-765-21 ELECT CHIP 47uF 20% 16V C15 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C100 1-114-582-91 CERAMIC CHIP 0.1uF 10% 16V C101 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V

C103 1-114-868-11 CERAMIC CHIP 0.1uF 10% 50V C203 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V C301 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V C302 1-116-733-11 CERAMIC CHIP 1uF 10% 25V C303 1-137-893-11 ELECT CHIP 22uF 20% 16V

C305 1-116-733-11 CERAMIC CHIP 1uF 10% 25V C306 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C308 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V C309 1-100-354-21 ELECT CHIP 220uF 20% 6.3V C311 1-127-715-11 CERAMIC CHIP 0.22uF 10% 16V

C312 1-124-779-00 ELECT CHIP 10uF 20% 16V C313 1-137-765-21 ELECT CHIP 47uF 20% 16V C314 1-112-064-11 CERAMIC CHIP 2.2uF 10% 10V C315 1-112-780-11 CERAMIC CHIP 0.47uF 10% 16V C317 1-112-780-11 CERAMIC CHIP 0.47uF 10% 16V

C319 1-112-780-11 CERAMIC CHIP 0.47uF 10% 16V C321 1-112-780-11 CERAMIC CHIP 0.47uF 10% 16V C323 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V C326 1-164-866-11 CERAMIC CHIP 47PF 5% 50V C327 1-116-733-11 CERAMIC CHIP 1uF 10% 25V


C331 1-116-739-11 CERAMIC CHIP 0.47uF 10% 50V C334 1-118-067-11 ELECT 3300uF 20% 16V C335 1-114-868-11 CERAMIC CHIP 0.1uF 10% 50V C398 1-100-905-11 CERAMIC CHIP 0.001uF 10% 50V

C399 1-100-591-91 CERAMIC CHIP 1uF 10% 25V C401 1-114-582-91 CERAMIC CHIP 0.1uF 10% 16V C402 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C403 1-100-354-21 ELECT CHIP 220uF 20% 6.3V C407 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V

C409 1-100-588-21 ELECT CHIP 1000uF 20% 6.3V C410 1-124-779-00 ELECT CHIP 10uF 20% 16V C411 1-100-354-21 ELECT CHIP 220uF 20% 6.3V C413 1-124-779-00 ELECT CHIP 10uF 20% 16V C414 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V

C415 1-128-398-11 ELECT CHIP 220uF 20% 16V C416 1-128-992-21 ELECT CHIP 47uF 20% 25V C419 1-124-779-00 ELECT CHIP 10uF 20% 16V C420 1-124-779-00 ELECT CHIP 10uF 20% 16V C422 1-124-779-00 ELECT CHIP 10uF 20% 16V

C424 1-124-779-00 ELECT CHIP 10uF 20% 16V C425 1-124-779-00 ELECT CHIP 10uF 20% 16V C436 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C437 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C438 1-112-064-11 CERAMIC CHIP 2.2uF 10% 10V

C439 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C440 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C442 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C457 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C501 1-162-923-11 CERAMIC CHIP 47PF 5% 50V

(EXCEPT EA)

C502 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V C503 1-162-923-11 CERAMIC CHIP 47PF 5% 50V

(EXCEPT EA) C504 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C507 1-164-858-11 CERAMIC CHIP 22PF 5% 50V C508 1-164-856-81 CERAMIC CHIP 18PF 5% 50V

C510 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C512 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V C513 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C514 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V C518 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V

C520 1-164-866-11 CERAMIC CHIP 47PF 5% 50V C521 1-164-866-11 CERAMIC CHIP 47PF 5% 50V C522 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C523 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C601 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V


C610 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C612 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C613 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C614 1-164-850-11 CERAMIC CHIP 10PF 0.5PF 50V C615 1-164-850-11 CERAMIC CHIP 10PF 0.5PF 50V

C616 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C617 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C683 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V

KEY MAINVer. 1.3

Note 1: When the complete MAIN board is replaced, the destination setting is necessary. Refer to “NOTE THE MAIN BOARD OR SYSTEM CONTROLLER (IC501) REPLACING” on page 5.

Note 2: The complete MAIN board has been changed in the midway of production. When the complete MAIN board is replaced, be sure to refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7.



49

C685 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V C686 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V

C687 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C688 1-165-884-11 CERAMIC CHIP 2.2uF 10% 6.3V C689 1-165-884-11 CERAMIC CHIP 2.2uF 10% 6.3V C690 1-165-908-11 CERAMIC CHIP 1uF 10% 10V C701 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V

C711 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C712 1-126-208-21 ELECT CHIP 47uF 20% 4V C713 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V C714 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V C715 1-164-935-11 CERAMIC CHIP 470PF 10% 50V

C716 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C717 1-114-582-91 CERAMIC CHIP 0.1uF 10% 16V C718 1-127-772-81 CERAMIC CHIP 0.033uF 10% 10V C719 1-100-579-81 CERAMIC CHIP 0.0056uF 10% 25V C720 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V

C721 1-114-582-91 CERAMIC CHIP 0.1uF 10% 16V C722 1-114-582-91 CERAMIC CHIP 0.1uF 10% 16V C724 1-114-582-91 CERAMIC CHIP 0.1uF 10% 16V C725 1-124-778-00 ELECT CHIP 22uF 20% 6.3V C726 1-164-940-11 CERAMIC CHIP 0.0033uF 10% 16V


C733 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C734 1-164-860-11 CERAMIC CHIP 27PF 5% 50V C735 1-114-582-91 CERAMIC CHIP 0.1uF 10% 16V C737 1-100-742-91 CERAMIC CHIP 2.2uF 20% 10V C738 1-100-742-91 CERAMIC CHIP 2.2uF 20% 10V

C739 1-114-582-91 CERAMIC CHIP 0.1uF 10% 16V C741 1-164-878-11 CERAMIC CHIP 150PF 5% 50V* C742 1-116-727-11 CERAMIC CHIP 2.2uF 10% 16V C743 1-164-878-11 CERAMIC CHIP 150PF 5% 50V* C744 1-116-727-11 CERAMIC CHIP 2.2uF 10% 16V

C745 1-164-878-11 CERAMIC CHIP 150PF 5% 50V* C746 1-116-727-11 CERAMIC CHIP 2.2uF 10% 16V C747 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50V C748 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50V C750 1-126-603-11 ELECT CHIP 4.7uF 20% 35V

C751 1-126-603-11 ELECT CHIP 4.7uF 20% 35V C752 1-126-603-11 ELECT CHIP 4.7uF 20% 35V C753 1-126-603-11 ELECT CHIP 4.7uF 20% 35V C754 1-100-742-91 CERAMIC CHIP 2.2uF 20% 10V C756 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V


C767 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C768 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C771 1-164-866-11 CERAMIC CHIP 47PF 5% 50V C772 1-127-988-81 CERAMIC CHIP 0.015uF 10% 16V C776 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V

C777 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C778 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C779 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V

C780 1-164-172-11 CERAMIC CHIP 0.0056uF 10% 25V C781 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V


C788 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V C789 1-164-939-11 CERAMIC CHIP 0.0022uF 10% 50V C792 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V C1301 1-100-591-91 CERAMIC CHIP 1uF 10% 25V C1304 1-116-705-11 CERAMIC CHIP 47uF 20% 16V

C1305 1-100-055-21 CERAMIC CHIP 22uF 20% 16V C1306 1-164-936-11 CERAMIC CHIP 680PF 10% 50V C1307 1-164-943-81 CERAMIC CHIP 0.01uF 10% 16V C1308 1-112-064-11 CERAMIC CHIP 2.2uF 10% 10V C1309 1-114-323-11 CERAMIC CHIP 0.01uF 10% 50V

C1310 1-114-582-91 CERAMIC CHIP 0.1uF 10% 16V C1311 1-117-681-11 ELECT CHIP 100uF 20% 16V C1312 1-100-567-81 CERAMIC CHIP 0.01uF 10% 25V C1315 1-100-055-21 CERAMIC CHIP 22uF 20% 16V C1316 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V

(EXCEPT EA)

C1316 1-114-246-11 CERAMIC CHIP 1uF 20% 25V (EA) C1317 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V

< CONNECTOR >

CN102 1-842-266-22 SOCKET, CONNECTOR 20P CN301 1-843-352-11 PIN, CONNECTOR 16P CN501 1-779-806-21 CONNECTOR 8P CN601 1-785-900-21 CONNECTOR 5P CN700 1-842-487-12 CONNECTOR, BOARD TO BOARD 28P

< DIODE >

D101 6-503-205-01 DIODE RKZ6.8B2KGP1 D102 6-503-205-01 DIODE RKZ6.8B2KGP1 D110 6-503-205-01 DIODE RKZ6.8B2KGP1 D119 6-503-205-01 DIODE RKZ6.8B2KGP1 D306 6-503-238-01 DIODE GN1G (AEP, UK)

D318 6-503-238-01 DIODE GN1G D320 6-503-213-01 DIODE RKZ18B2KGP1 D321 6-503-238-01 DIODE GN1G D323 6-503-213-01 DIODE RKZ18B2KGP1 D324 6-503-238-01 DIODE GN1G

D401 6-502-961-01 DIODE DA2J10100L D403 6-500-335-01 DIODE MC2838-T112-1 D530 6-503-759-01 DIODE RB751V40, 115 D731 6-501-013-01 DIODE BAT54ALT1G D805 6-503-206-01 DIODE RKZ7.5B2KGP1

D806 6-503-213-01 DIODE RKZ18B2KGP1 D1300 6-503-319-01 DIODE DB2X41400L

< FUSE >

F4 1-576-415-11 FUSE (2 A/32 V)

< FERRITE BEAD/JUMPER RESISTOR >

FB19 1-400-334-21 FERRITE, EMI (SMD) (1608) FB398 1-469-084-21 FERRITE FB501 1-414-595-11 INDUCTOR, FERRITE BEAD FB610 1-216-864-11 SHORT CHIP 0

MAINVer. 1.4

Note: C741, C743, C745, CN501 and CN601 have been deleted in the midway of production.



50

FB611 1-500-113-22 BEAD, FERRITE (CHIP) (1608)

FB612 1-500-113-22 BEAD, FERRITE (CHIP) (1608) FB694 1-216-864-11 SHORT CHIP 0 FB695 1-216-864-11 SHORT CHIP 0 FB696 1-216-864-11 SHORT CHIP 0 FB698 1-216-864-11 SHORT CHIP 0

FB717 1-216-864-11 SHORT CHIP 0 FB718 1-216-864-11 SHORT CHIP 0 FB719 1-216-864-11 SHORT CHIP 0 FB720 1-216-864-11 SHORT CHIP 0 FB721 1-216-864-11 SHORT CHIP 0

FB722 1-216-864-11 SHORT CHIP 0 FB724 1-469-084-21 FERRITE FB750 1-216-864-11 SHORT CHIP 0 FB751 1-216-864-11 SHORT CHIP 0 FB760 1-216-864-11 SHORT CHIP 0

FB762 1-216-864-11 SHORT CHIP 0 FB782 1-469-084-21 FERRITE FB801 1-500-113-22 BEAD, FERRITE (CHIP) (1608) FB802 1-500-113-22 BEAD, FERRITE (CHIP) (1608) FB803 1-500-113-22 BEAD, FERRITE (CHIP) (1608)

FB890 1-500-113-22 BEAD, FERRITE (CHIP) (1608) FB891 1-500-113-22 BEAD, FERRITE (CHIP) (1608)

< IC >

IC301 6-715-848-21 IC TDF8556AJ/N5 IC401 6-714-623-01 IC BD3467FV-E2 IC402 6-716-993-01 IC MM1836A33NRE IC403 6-712-776-01 IC PST8228UL IC501 6-717-897-02 IC R5F3650KBDZ78FA (Former type)

IC501 6-718-646-01 IC R5F3650KBDZ75FA (New type) IC601 6-718-962-01 IC M321FEFG-7KN3 (SY IC681 6-711-238-01 IC NJM2878F3-15 (TE2) IC682 6-711-238-01 IC NJM2878F3-15 (TE2) IC701 6-715-712-01 IC TC94A99FG-003 (SY)

IC1300 6-718-913-01 IC OZ5329IGN-A1-0-TR

< JACK >

J1 1-815-185-13 JACK (ANT) (ANTENNA) J401 1-822-713-11 JACK, PIN 2P (AUDIO OUT, REAR/SUB) J801 1-566-822-81 JACK (REMOTE IN)

< COIL >

L1 1-400-073-21 INDUCTOR 4.7uH L301 1-460-443-11 CHOKE COIL 140uH L1300 1-216-296-11 SHORT CHIP 0 L1301 1-481-904-11 CHOKE COIL 47uH

< TRANSISTOR >

Q301 8-729-620-13 TRANSISTOR 2SC4154TP-1EF Q401 6-552-937-01 TRANSISTOR LTC014TUBFS8TL Q402 6-552-937-01 TRANSISTOR LTC014TUBFS8TL Q403 6-552-937-01 TRANSISTOR LTC014TUBFS8TL Q404 6-552-937-01 TRANSISTOR LTC014TUBFS8TL

Q405 6-552-937-01 TRANSISTOR LTC014TUBFS8TL Q406 6-552-937-01 TRANSISTOR LTC014TUBFS8TL Q407 6-552-410-01 TRANSISTOR DRA5114E0L Q409 6-552-430-01 TRANSISTOR DRC5114E0L Q710 8-729-024-43 TRANSISTOR 2SA1365-T112-1EF

MAIN

Q801 6-552-444-01 TRANSISTOR DRC5144E0L Q802 6-552-430-01 TRANSISTOR DRC5114E0L Q803 8-729-620-13 TRANSISTOR 2SC4154TP-1EF

< RESISTOR >

R10 1-218-990-81 SHORT CHIP 0 R11 1-216-864-11 SHORT CHIP 0 R12 1-216-864-11 SHORT CHIP 0 R13 1-216-821-11 METAL CHIP 1K 5% 1/10W R19 1-216-864-11 SHORT CHIP 0

R102 1-216-864-11 SHORT CHIP 0 R116 1-216-295-91 SHORT CHIP 0 R121 1-216-864-11 SHORT CHIP 0 R122 1-216-864-11 SHORT CHIP 0 R199 1-216-864-11 SHORT CHIP 0

R300 1-216-296-11 SHORT CHIP 0 R301 1-218-941-81 METAL CHIP 100 5% 1/16W R302 1-218-941-81 METAL CHIP 100 5% 1/16W R303 1-216-182-00 METAL CHIP 220 5% 1/8W R304 1-216-182-00 METAL CHIP 220 5% 1/8W

R305 1-216-182-00 METAL CHIP 220 5% 1/8W R306 1-216-182-00 METAL CHIP 220 5% 1/8W R307 1-218-943-11 METAL CHIP 150 5% 1/16W R308 1-216-295-91 SHORT CHIP 0 R309 1-218-973-11 METAL CHIP 47K 5% 1/16W

R311 1-216-073-91 METAL CHIP 10K 5% 1/10W R312 1-218-973-11 METAL CHIP 47K 5% 1/16W R313 1-218-973-11 METAL CHIP 47K 5% 1/16W R314 1-218-961-11 METAL CHIP 4.7K 5% 1/16W R340 1-216-864-11 SHORT CHIP 0

R378 1-216-073-91 METAL CHIP 10K 5% 1/10W R395 1-216-296-11 SHORT CHIP 0 R396 1-216-296-11 SHORT CHIP 0 R400 1-216-295-91 SHORT CHIP 0 R401 1-218-977-11 METAL CHIP 100K 5% 1/16W

R402 1-218-953-11 METAL CHIP 1K 5% 1/16W R403 1-216-833-11 METAL CHIP 10K 5% 1/10W R404 1-218-953-11 METAL CHIP 1K 5% 1/16W R405 1-216-833-11 METAL CHIP 10K 5% 1/10W R406 1-218-990-81 SHORT CHIP 0

R407 1-218-953-11 METAL CHIP 1K 5% 1/16W R409 1-216-833-11 METAL CHIP 10K 5% 1/10W R410 1-218-953-11 METAL CHIP 1K 5% 1/16W R411 1-216-833-11 METAL CHIP 10K 5% 1/10W R415 1-216-049-11 METAL CHIP 1K 5% 1/10W

R416 1-216-049-11 METAL CHIP 1K 5% 1/10W R417 1-216-834-11 METAL CHIP 12K 5% 1/10W R418 1-216-834-11 METAL CHIP 12K 5% 1/10W R419 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R420 1-216-295-91 SHORT CHIP 0

R421 1-218-953-11 METAL CHIP 1K 5% 1/16W R422 1-216-833-11 METAL CHIP 10K 5% 1/10W R423 1-218-953-11 METAL CHIP 1K 5% 1/16W R424 1-216-833-11 METAL CHIP 10K 5% 1/10W R429 1-216-801-11 METAL CHIP 22 5% 1/10W

R430 1-216-864-11 SHORT CHIP 0 R431 1-216-864-11 SHORT CHIP 0 R432 1-216-833-11 METAL CHIP 10K 5% 1/10W R433 1-216-296-11 SHORT CHIP 0 R434 1-216-296-11 SHORT CHIP 0

Ver. 1.4


Note 1: When IC501 is replaced, the destination setting is necessary. Refer to “NOTE THE MAIN BOARD OR SYSTEM CON-TROLLER (IC501) REPLACING” on page 5.



51

R501 1-218-977-11 METAL CHIP 100K 5% 1/16W R502 1-216-845-11 METAL CHIP 100K 5% 1/10W R510 1-218-941-81 METAL CHIP 100 5% 1/16W R511 1-218-941-81 METAL CHIP 100 5% 1/16W R513 1-218-977-11 METAL CHIP 100K 5% 1/16W

R514 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R515 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R516 1-208-911-11 METAL CHIP 10K 0.5% 1/16W R517 1-218-953-11 METAL CHIP 1K 5% 1/16W R518 1-218-953-11 METAL CHIP 1K 5% 1/16W

R521 1-218-971-11 METAL CHIP 33K 5% 1/16W R522 1-218-971-11 METAL CHIP 33K 5% 1/16W R523 1-218-941-81 METAL CHIP 100 5% 1/16W R524 1-218-941-81 METAL CHIP 100 5% 1/16W R525 1-218-941-81 METAL CHIP 100 5% 1/16W

R527 1-218-977-11 METAL CHIP 100K 5% 1/16W R529 1-218-949-11 METAL CHIP 470 5% 1/16W R531 1-218-977-11 METAL CHIP 100K 5% 1/16W R533 1-218-953-11 METAL CHIP 1K 5% 1/16W R534 1-218-953-11 METAL CHIP 1K 5% 1/16W

R535 1-218-949-11 METAL CHIP 470 5% 1/16W R536 1-218-977-11 METAL CHIP 100K 5% 1/16W R538 1-218-965-11 METAL CHIP 10K 5% 1/16W R539 1-218-990-81 SHORT CHIP 0 R540 1-216-845-11 METAL CHIP 100K 5% 1/10W

R541 1-245-604-11 METAL CHIP 10M 5% 1/16W R542 1-218-981-91 METAL CHIP 220K 5% 1/16W R543 1-218-990-81 SHORT CHIP 0 R544 1-216-857-11 METAL CHIP 1M 5% 1/10W R545 1-216-845-11 METAL CHIP 100K 5% 1/10W

R546 1-218-977-11 METAL CHIP 100K 5% 1/16W R547 1-218-941-81 METAL CHIP 100 5% 1/16W R548 1-218-990-81 SHORT CHIP 0 R549 1-218-990-81 SHORT CHIP 0 R552 1-218-977-11 METAL CHIP 100K 5% 1/16W

R553 1-218-949-11 METAL CHIP 470 5% 1/16W R555 1-218-990-81 SHORT CHIP 0 R556 1-218-957-11 METAL CHIP 2.2K 5% 1/16W R557 1-218-957-11 METAL CHIP 2.2K 5% 1/16W R560 1-218-977-11 METAL CHIP 100K 5% 1/16W

R561 1-218-990-81 SHORT CHIP 0 R562 1-218-990-81 SHORT CHIP 0 R563 1-218-941-81 METAL CHIP 100 5% 1/16W R564 1-216-809-11 METAL CHIP 100 5% 1/10W R565 1-218-977-11 METAL CHIP 100K 5% 1/16W


R571 1-218-941-81 METAL CHIP 100 5% 1/16W R572 1-218-941-81 METAL CHIP 100 5% 1/16W R573 1-218-941-81 METAL CHIP 100 5% 1/16W R574 1-218-941-81 METAL CHIP 100 5% 1/16W R575 1-216-845-11 METAL CHIP 100K 5% 1/10W


R586 1-216-845-11 METAL CHIP 100K 5% 1/10W R600 1-218-941-81 METAL CHIP 100 5% 1/16W R601 1-218-941-81 METAL CHIP 100 5% 1/16W R602 1-218-941-81 METAL CHIP 100 5% 1/16W R603 1-218-941-81 METAL CHIP 100 5% 1/16W

R604 1-216-809-11 METAL CHIP 100 5% 1/10W R605 1-218-977-11 METAL CHIP 100K 5% 1/16W R606 1-218-977-11 METAL CHIP 100K 5% 1/16W R607 1-218-977-11 METAL CHIP 100K 5% 1/16W R613 1-218-973-11 METAL CHIP 47K 5% 1/16W


R619 1-218-953-11 METAL CHIP 1K 5% 1/16W R620 1-218-953-11 METAL CHIP 1K 5% 1/16W R621 1-218-941-81 METAL CHIP 100 5% 1/16W R622 1-216-833-11 METAL CHIP 10K 5% 1/10W R623 1-218-990-81 SHORT CHIP 0

R625 1-216-845-11 METAL CHIP 100K 5% 1/10W R629 1-218-941-81 METAL CHIP 100 5% 1/16W R636 1-218-961-11 METAL CHIP 4.7K 5% 1/16W R637 1-218-971-11 METAL CHIP 33K 5% 1/16W R638 1-218-971-11 METAL CHIP 33K 5% 1/16W

R639 1-218-965-11 METAL CHIP 10K 5% 1/16W R642 1-218-965-11 METAL CHIP 10K 5% 1/16W R643 1-216-845-11 METAL CHIP 100K 5% 1/10W R644 1-218-941-81 METAL CHIP 100 5% 1/16W R645 1-218-941-81 METAL CHIP 100 5% 1/16W

R646 1-218-941-81 METAL CHIP 100 5% 1/16W R647 1-218-941-81 METAL CHIP 100 5% 1/16W R648 1-218-941-81 METAL CHIP 100 5% 1/16W R649 1-218-941-81 METAL CHIP 100 5% 1/16W R652 1-218-977-11 METAL CHIP 100K 5% 1/16W


R667 1-218-965-11 METAL CHIP 10K 5% 1/16W R668 1-218-989-11 METAL CHIP 1M 5% 1/16W R669 1-218-990-81 SHORT CHIP 0 R671 1-216-793-11 METAL CHIP 4.7 5% 1/10W R672 1-216-793-11 METAL CHIP 4.7 5% 1/10W

R673 1-216-835-11 METAL CHIP 15K 5% 1/10W R674 1-216-835-11 METAL CHIP 15K 5% 1/10W R675 1-218-977-11 METAL CHIP 100K 5% 1/16W R676 1-218-977-11 METAL CHIP 100K 5% 1/16W R685 1-218-990-81 SHORT CHIP 0

R688 1-216-864-11 SHORT CHIP 0 R689 1-216-864-11 SHORT CHIP 0 R690 1-220-200-81 METAL CHIP 30K 5% 1/16W R691 1-218-971-11 METAL CHIP 33K 5% 1/16W R692 1-218-990-81 SHORT CHIP 0

R693 1-218-990-81 SHORT CHIP 0 R695 1-216-864-11 SHORT CHIP 0 R697 1-218-990-81 SHORT CHIP 0 R699 1-216-864-11 SHORT CHIP 0 R710 1-218-953-11 METAL CHIP 1K 5% 1/16W

MAIN



52

R711 1-218-929-11 METAL CHIP 10 5% 1/16W R712 1-220-802-11 METAL CHIP 3.3 5% 1/16W R714 1-218-990-81 SHORT CHIP 0 R715 1-218-990-81 SHORT CHIP 0 R716 1-218-990-81 SHORT CHIP 0


R722 1-218-989-11 METAL CHIP 1M 5% 1/16W R723 1-218-955-11 METAL CHIP 1.5K 5% 1/16W R724 1-218-958-11 METAL CHIP 2.7K 5% 1/16W R725 1-218-958-11 METAL CHIP 2.7K 5% 1/16W R726 1-218-965-11 METAL CHIP 10K 5% 1/16W


R732 1-218-990-81 SHORT CHIP 0 R733 1-218-990-81 SHORT CHIP 0 R736 1-218-977-11 METAL CHIP 100K 5% 1/16W R737 1-218-953-11 METAL CHIP 1K 5% 1/16W R738 1-218-953-11 METAL CHIP 1K 5% 1/16W

R739 1-218-953-11 METAL CHIP 1K 5% 1/16W R740 1-218-953-11 METAL CHIP 1K 5% 1/16W R741 1-218-941-81 METAL CHIP 100 5% 1/16W R742 1-216-841-11 METAL CHIP 47K 5% 1/10W R743 1-218-967-11 METAL CHIP 15K 5% 1/16W

R744 1-218-983-11 METAL CHIP 330K 5% 1/16W R745 1-218-941-81 METAL CHIP 100 5% 1/16W R746 1-218-990-81 SHORT CHIP 0 R747 1-218-990-81 SHORT CHIP 0 R748 1-218-990-81 SHORT CHIP 0

R749 1-218-990-81 SHORT CHIP 0 R750 1-218-969-11 METAL CHIP 22K 5% 1/16W R751 1-218-969-11 METAL CHIP 22K 5% 1/16W R761 1-216-864-11 SHORT CHIP 0 R763 1-216-864-11 SHORT CHIP 0

R764 1-216-864-11 SHORT CHIP 0 R765 1-216-864-11 SHORT CHIP 0 R766 1-216-864-11 SHORT CHIP 0 R814 1-218-981-91 METAL CHIP 220K 5% 1/16W R818 1-218-981-91 METAL CHIP 220K 5% 1/16W

R819 1-218-953-11 METAL CHIP 1K 5% 1/16W R820 1-218-953-11 METAL CHIP 1K 5% 1/16W R833 1-218-977-11 METAL CHIP 100K 5% 1/16W R864 1-216-864-11 SHORT CHIP 0 R865 1-216-864-11 SHORT CHIP 0

R899 1-216-296-11 SHORT CHIP 0 R1300 1-216-817-11 METAL CHIP 470 5% 1/10W R1301 1-216-809-11 METAL CHIP 100 5% 1/10W R1302 1-218-977-11 METAL CHIP 100K 5% 1/16W R1305 1-208-905-11 METAL CHIP 5.6K 0.5% 1/16W

R1307 1-208-933-11 METAL CHIP 82K 0.5% 1/16W R1308 1-208-933-11 METAL CHIP 82K 0.5% 1/16W R1310 1-218-953-11 METAL CHIP 1K 5% 1/16W R1311 1-218-885-11 METAL CHIP 39K 0.5% 1/10W R1312 1-218-871-11 METAL CHIP 10K 0.5% 1/10W

R1313 1-216-849-11 METAL CHIP 220K 5% 1/10W R1315 1-218-953-11 METAL CHIP 1K 5% 1/16W

< TUNER UNIT >

TU901 A-1878-198-A TUX-DSP02 (TUNER UNIT)

< VIBRATOR >

X501 1-814-544-21 VIBRATOR, CERAMIC (7.92 MHz) (EXCEPT EA) X501 1-814-548-11 VIBRATOR, CERAMIC (7.92 MHz) (EA) X502 1-813-202-11 VIBRATOR, CRYSTAL (32.768 kHz) X601 1-814-304-11 VIBRATOR, CRYSTAL (12 MHz) X701 1-795-561-21 VIBRATOR, CERAMIC (16.934 MHz)*************************************************************

SENSOR BOARD *************

When the SENSOR board is defective, exchange the MECHANICAL BLOCK (Z) ASSY 08 (Former type) or MECHANICAL BLOCK (11CA) ASSY (New type).*************************************************************

A-1823-723-A SERVO BOARD, COMPLETE (Former type) A-1866-089-A SERVO BOARD, COMPLETE (New type) **********************

When the SERVO board is defective, exchange the complete mounted board.*************************************************************

MISCELLANEOUS **************

6 1-839-372-11 CONNECTION CORD FOR AUTOMOBILE (POWER) (US, CND, E, EA, MX, KR, IND)

6 1-839-387-11 CONNECTION CORD (ISO) (POWER) (AEP, RU, UK, AR)

61 1-780-968-11 CONDUCTIVE BOARD, CONNECTION 66 A-1831-758-A PANEL OVERALL ASSY, FRONT

(GT40U: US, CND) (Former type) 66 A-1831-758-B PANEL OVERALL ASSY, FRONT

(GT40U: US, CND) (New type)

66 A-1831-765-A PANEL OVERALL ASSY, FRONT (GT40UW) (Former type)

66 A-1831-765-B PANEL OVERALL ASSY, FRONT (GT40UW) (New type)

66 A-1831-774-A PANEL OVERALL ASSY, FRONT (GT40U: RU) (Former type)

66 A-1831-774-B PANEL OVERALL ASSY, FRONT (GT40U: RU) (New type)

66 A-1831-783-A PANEL OVERALL ASSY, FRONT (GT45U: E, EA, AR) (Former type)

66 A-1831-783-B PANEL OVERALL ASSY, FRONT (GT45U: E, EA, AR) (New type)

66 A-1831-789-A PANEL OVERALL ASSY, FRONT (GT44U: IND) (Former type)

66 A-1831-789-B PANEL OVERALL ASSY, FRONT (GT44U: IND) (New type)





SERVOMAINVer. 1.4

SENSOR


Note 1: In this unit, the complete SERVO board has been changed in the midway of production. When replacing the complete SERVO board, refer to “ABOUT THE MG-101CA-188 OF FORMER AND NEW” on page 6.



53





66 A-1847-849-A PANEL OVERALL ASSY, FRONT (GT45U: MX) (Former type)

66 A-1847-849-B PANEL OVERALL ASSY, FRONT (GT45U: MX) (New type)

66 A-1850-669-A PANEL OVERALL ASSY, FRONT (GT45U: KR) (Former type)

66 A-1850-669-B PANEL OVERALL ASSY, FRONT (GT45U: KR) (New type)

101 A-1313-179-A MECHANICAL BLOCK (Z) ASSY 08 (Former type) 101 A-1866-801-A MECHANICAL BLOCK (11CA) ASSY (New type)0 102 A-1284-705-A DAXEV08//Q0 103 X-2149-672-1 SERVICE ASSY, OP (DAX-25A) CN902 1-822-798-11 USB CONNECTOR (USB)

FU601 1-532-877-11 FUSE (BLADE TYPE) (AUTO FUSE) (10 A/32 V) IC902 6-600-806-01 IC PNJ4813M01S0 J901 1-822-148-11 SMALL TYPE JACK (VERTICAL) (AUX) LCD901 1-811-224-11 DISPLAY PANEL, LIQUID CRYSTAL RE901 1-487-023-22 ROTARY ENCODER (PUSH SELECT (VOLUME))*************************************************************

ACCESSORIES ************

1-489-810-21 REMOTE COMMANDER (RM-X211) (EXCEPT AEP, RU, UK)

4-284-500-11 MANUAL, INSTRUCTION (ENGLISH, FRENCH) (GT40U: US, CND)

4-284-500-21 MANUAL, INSTRUCTION (ENGLISH, SPANISH) (GT40UW)

4-284-500-31 MANUAL, INSTRUCTION (ENGLISH, FRENCH, GERMAN, ITALIAN, DUTCH) (AEP, UK)

4-284-500-42 MANUAL, INSTRUCTION (RUSSIAN, UKRAINIAN) (RU)

4-284-500-51 MANUAL, INSTRUCTION (ENGLISH, SPANISH) (E, MX, AR, IND)

4-284-501-12 MANUAL, INSTRUCTION INSTALL (ENGLISH, FRENCH) (GT40U: US, CND)

4-284-501-22 MANUAL, INSTRUCTION INSTALL (ENGLISH, SPANISH) (GT40UW)

4-284-501-31 MANUAL, INSTRUCTION INSTALL (ENGLISH, FRENCH, GERMAN, ITALIAN, DUTCH) (AEP, UK)

4-284-501-41 MANUAL, INSTRUCTION INSTALL (RUSSIAN, UKRAINIAN) (RU)

4-284-501-51 MANUAL, INSTRUCTION INSTALL (ENGLISH, SPANISH) (E, MX, IND)

4-284-501-61 MANUAL, INSTRUCTION INSTALL (ENGLISH, SPANISH) (AR)

4-410-179-11 MANUAL, INSTRUCTION INSTALL (ENGLISH, ARABIC, PERSIAN) (EA)

Ver. 1.3

4-410-179-21 MANUAL, INSTRUCTION INSTALL (ENGLISH, KOREAN) (KR)

4-410-607-11 MANUAL, INSTRUCTION (ENGLISH, ARABIC, PERSIAN) (EA)

4-410-607-22 MANUAL, INSTRUCTION (ENGLISH, KOREAN) (KR)

*************************************************************

PARTS FOR INSTALLATION AND CONNECTIONS **************************************

151 X-2548-178-1 FRAME ASSY, FITTING 152 1-465-459-51 ADAPTOR, ANTENNA (AEP, RU, UK, AR) 153 1-839-387-11 CONNECTION CORD (ISO) (POWER)

(AEP, RU, UK, AR) 154 1-839-372-11 CONNECTION CORD FOR AUTOMOBILE

(POWER) (US, CND, E, EA, MX, KR, IND) 155 4-276-003-01 KEY (FRAME) (1 piece)

156 4-183-280-02 COLLAR (EXCEPT AEP, UK, MX, AR) 156 4-278-065-01 COLLAR (AEP, UK, MX, AR) 157 X-3381-154-1 SCREW ASSY (BS4), FITTING

(GT44U: IND/GT45U) 158 X-3382-926-1 SCREW ASSY (BS), FITTING (AEP, RU, UK) 159 3-349-410-11 BUSHING (EXCEPT US, CND) 160 3-934-325-01 SCREW, +K (5X8) TAPPING (1 piece)


153152

157158

154

151

160159

155 156

2

4


Note 2: MECHANICAL BLOCK ASSY (Ref. No. 101) has been changed in the midway of production. When MECHANICAL BLOCK ASSY (Ref. No. 101) is replaced, be sure to refer to “ABOUT THE MG-101CA-188 OF FORMER AND NEW” on page 6.


54


MEMO

SERVICE MANUAL

SUPPLEMENT-1

9-893-214-81

Ver. 1.2 2011.11

File this supplement with the service manual.File this supplement with the service manual.

Subject: PRINTED WIRING BOARD – MAIN board for Saudi Arabia model –

In this unit, MAIN board is different only Saudi Arabia model.Printed wiring board of Saudi Arabia model is described in this supplement-1.Refer to original service manual and supplement-2 for other information




AEP ModelUK Model

CDX-GT40U/GT44U

E ModelCDX-GT45U




2

1. DIAGRAMS

THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS.(In addition to this, the necessary note is printed in each block.)

For Printed Wiring Boards.Note:• X : Parts extracted from the component side.• Y : Parts extracted from the conductor side.• a : Through hole.• : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated.)




C

BThese are omitted.

E

Q

Note: When COMPLETE MAIN BOARD is replaced, the destination setting is necessary. Refer to “NOTE THE MAIN BOARD OR SYSTEM CONTROLLER (IC501) REPLACING” on page 5 on original service manual.



33

1-1. PRINTED WIRING BOARD – MAIN Section (1/2) – • : Uses unleaded solder.

1

A

B

C

D

E

F

G

H

I

J

234567891011121314

IC1300

IC601

IC701

IC403

IC681 IC682

IC501

IC401

9

16

8

1

5

1

B E

21 20

40 1

1100

7675

2625

5051

1

8

Barcode

1100 8081

5051

3031

7675

5051

1100

2625

R400

R401

R402

R403

R404

C131

0

R405

C1311

R406

C131

2

R407

C131

5

R409

C1316

C131

7

R600

FB61

0

R601

FB61

1

R602

FB61

2

R603

R410

R411

R605R606

R607

D1300

R130

0

R130

2

R613

R614

R421

R130

5

R615

R422

R616

R423

R1307

R617

R424

R1308

R618R619

R429

CN601R814

R131

0

R620

R131

1

R621

R131

2

R1313

R623

R818

R430

R819

R131

5

R432

C203

R433

R629

R820

C401

C403

R636

R637

R638

C409

R639

C601

R833

C410

C411

C605

C606

R642

C413

C607

C414

C608

R644

C415

C609

R645

C416

R646

R647

R648

C419

R649

X601

C612

C610C6

13

C420

C614

C615

C422

C616

R652

C617

R653

R656

C424

R654

C425

R655

C426

IFM601R661

R667 R668

R669

R864

TP718

R865

TP719

R671R672

TP333

R673

TP334

R674R6

75

R676

TP720TP721

TP722TP723TP724

FB69

4

FB695

R685

FB696

C457

R688

FB698

Q301

R689

TP732TP733

TP734

TP735

TP736

TP737 TP738

R690

D401

TP739R692

R693

D403

R695

R697

TP740 TP741TP742

TP743

D805

D806

Q710

MAIN BOARD (SIDE A)

C683

C685

C686

C687

C688

C689

C690

IFM680

R102

FB50

1

R300

R301

R302

R303

R304

R305

R306

R307

R308

R309

R116

R501

R311

R312

R313

R314

R121

R122

R510

R511

R513

FB717

R514

FB718

R515

FB719

R516R517

R518

R710

FB72

0

CN501

R711

FB721

R712

FB722

FB724

R714

R521

R715

R522

R716

R523

R717

R524

R718

R525

R719

R527 R529

R720R721

R722 R7

23 R724

R531

R725

R726

C303

R533

R727

R534

R728

R340

R535

R729

R536

C308

R538

C309

R539

L1301

CL003CL004

R730R7

31

C502

R732

R733

C504

R541

C312

R542

R736

C507

C313

R543

R737

C508

C314

R544

R738

R10

C315

R739

R546

C317

R547R548

C319

R549 C510

FB75

0

R740

X501

FB75

1

R741

C512

R742

C513

R743

C514

R744

C321

R745

R552

R746

C323

R553

R747

C518

R748

R555

R749

R556

C326

R557

IFM501

X701

C711

C712C713

C520

C714

R750

C521

C715

R751

C522

FB762

C523

C717

C330

R560

C718

R561

C331

C719

R562

R563

IFM701

R565

R566

R567

C720

R569

C721C722

R378

C724 C725

R761

C726

C727

R763

R570

C728

R764

R571

C729

R572R573R574

R576

R577

C730

C732C733

FB39

8

C734

C735

FB782C737C738

S8

C739

R584

C741 C7

42C7

43

TP633

C744

TP634C7

45TP635

C746

C747

C748

Q401 Q402 Q403 Q404

C750

Q405

C751

Q406

C752

Q407

C753C754

Q409

C756

C759

C761

C764

Q801 Q802

C766

Q803

C767

C768

D321D323

C771

C772

C776

C777

C778

C779

C398

IFM50

C782

C783 C784

D530

C786

C787C7

88

C789

IFM60

D731

C792

TP682

C11

IFM70

C15

C130

1

C130

4

C130

5

C1306

C130

7

C130

8

C1309

1-885-266- 11

16 20

1 2

34

134

5

1

3 45

C100

L1300

Note 1: When IC501 is replaced, the destination setting is necessary. Refer to “NOTE THE MAIN BOARD OR SYSTEM CONTROLLER (IC501) REPLACING” on page 5 on original service manual.

Note 3: C741, C743, C745, CN501 and CN601 have been deleted in the midway of production.

Note 2: IC501 has been changed in the midway of production. When IC501 is replaced, be sure to refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7 on original service manual.

Ver. 1.4



44

1

A

B

C

D

E

F

G

H

I

2 3 4 5 6 7 8 9 10 11 12 13 14

IC402

IC301

KEY BOARD CN901

(Refer to page 31 on originalservice manual (Former type) or page 3

on supplement-2 (New type))

TOSERVOBOARD

(Refer to page25 on original

service manual)

A

FB80

1

FB80

2FB

803

R604

R415

R416R417

R418

R419

R1301

R420

R622

R431

R625

R434

C402

JL001

JL002

JL003

C407

JL004JL005

JL006

JL007

JL008

JL009

L1300

R643

JL010

JL011

JL012

JL013

C436

C437

C438

C439

C440

C442

TP342

FB89

0FB

891

R699

F4

R899

TP761

TP781

TP785

AB1

R502

L1

C101

C103

C301

C302 C305

C306

R540

C311

R545

R11R12R13

C701

R19

C327

IFM500

IFM502

FB760

C716

C332

R564

JL700

C335

JL701

JL702

JL703

R568

JL704

JL705JL706

JL707JL708

JL709

R765

R766

JL710

R575

JL711

JL712

JL713

R578

JL714

R579

JL715JL716

JL717

JL718

JL719

R199

JL720

D101

JL721

D102

R586

JL722

D103

JL723JL724

R395

JL725

R396

TP632

JL726 JL727

JL728

JL729

D110

JL730

JL731

JL732

JL733

TP640

CL061

TP641

TP642

CL063

TP643

CL064

TP644

D119

CL06

5CL

066

CL067

CL06

8CL

069

D318

C760

CL07

0

CL07

1CL

072

CL07

3CL

074

CL07

5CL

076

CL07

7

D320

CL078

CL07

9

D324

CL081CL082

C780

FB19

C399

W001

C781

W002

C10

TP695

TP696

J8019

1 8

16

191817

CN301

FU601

137

236

J401

J401

12 11

13 10

9

1

CN01

J1

A001

1

2 20

19 22

CN102

21

12

2728CN700

C334

MAIN BOARD (SIDE B)

1-885-266- 11

J801(REMOTE IN)

1

3

5

4

X502

J1(ANTENNA)

-2R

-1L

REAR/SUB

AUDIO OUT

TU901TUNER UNIT(TUX-DSP02)

1-2. PRINTED WIRING BOARD – MAIN Section (2/2) – • : Uses unleaded solder.

Note: Refer to “ABOUT CHANGE OF THE LCD DRIVER IC (IC901) ON THE KEY BOARD” on page 7 on original service manual for how to distinguish New/Former types.

Ver. 1.3

SERVICE MANUAL

SUPPLEMENT-2

9-893-214-82

Ver. 1.3 2012.06

File this supplement with the service manual.File this supplement with the service manual.

Subject: Change of KEY board (Suffi x-21/-22)

In this set, the LCD driver IC (IC901) on the KEY board has been changed in the midway of production.The following changes are performed by this change.

• Change of the KEY board (suffi x-21/-22) (Refer to this supplement-2)• Change of part No. of the FRONT PANEL OVERALL ASSY

(Refer to page 44, 52 and 53 on original service manual)• Change of part No. of the complete MAIN board

(Refer to page 43 and 48 on original service manual)• Change of part for Ref No. IC501 on the MAIN board

(Refer to page 50 on original service manual)

In this unit, KEY board has been changed in the midway of production.Discrimination, printed wiring board, schematic diagram and electrical parts list of changed KEY board are described in this supplement-2.Refer to original service manual and supplement-1 for other information.

Note: When the parts of new front panel and the parts of old main unit are combined, this unit does not operate normally.




AEP ModelUK Model

CDX-GT40U/GT44U

E ModelCDX-GT45U




2

2. DIAGRAMS

For Schematic Diagrams.Note:• All capacitors are in μF unless otherwise noted. (p: pF) 50

WV or less are not indicated except for electrolytics and tantalums.

• All resistors are in Ω and 1/4 W or less unless otherwise specifi ed.

• C : Panel designation.

THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.(In addition to this, the necessary note is printed in each block.)

• A : B+ Line.• Voltages are dc with respect to ground under no-signal

(detuned) conditions. no mark : FM• Voltages are taken with a VOM (Input impedance 10 M). Voltage variations may be noted due to normal production

tolerances.• Signal path. L : AUX c : USB

For Printed Wiring Boards.Note:• X : Parts extracted from the component side.• Y : Parts extracted from the conductor side.• : Pattern from the side which enables seeing. (The other layers’ patterns are not indicated.)




C

BThese are omitted.

E

Q

• Abbreviation RU : Russian model

• Abbreviation RU : Russian model

1. NEW/FORMER DISCRIMINATIONSerial number

Model Destination Former type New type

CDX-GT40U

US and Canadian models*

1864691 or smaller

1864692 or lager

Canadian model (for CXS-GT4016F)

1554521 or smaller

1554522 or lager

AEP and UK models

1885791 or smaller

1885792 or lager

Russian model 1822499 or smaller

1822500 or lager

CDX-GT40UW US model 1864116 or




CDX-GT44U

AEP and UK models

1939738 or smaller

1939739 or lager

Indian model 1865831 or smaller

1865832 or lager

CDX-GT45U

E model 1811434 or smaller

1811435 or lager

Saudi Arabia model 1878981 or smaller

1878982 or lager

Mexican model 1838226 or smaller

1838227 or lager

Argentina model 1798061 or smaller

1798062 or lager

Korean model 1826514 or smaller

1826515 or lager



*CXS-GT4016F (US model) is Former type only.

Three kinds of following distinguish methods exist.

• Distinguish method by serial number printed on the model number label (Refer to right side for the serial number).

Model number label

Displayed characters/values are example.

– Main unit (Bottom side) –

• Distinguish method by part No. printed on the KEY board– KEY Board (Side A) –

Former type : 1-884-821-11New type : 1-884-821-21 or 1-884-821-22

• Distinguish method by LCD driver IC (IC901) on the KEY board

IC901

– KEY Board (Side B) –

Former type : LC75839New type : PT6587-LQ



33

IC901

IC902

152

LSW905LSW906LSW907LSW908LSW909LSW910LSW911LSW912

LCD901LIQUID CRYSTAL DISPLAY PANEL

LED901LED932

LED9

34LE

D936

LED938

LED940

LED942

LED944

LED9

46

LED950

LED952

LED9

54

R903R9

20

R921R946

R952

R954


LED946,S901Z

LED952,S907MODE

RE901PUSH ENTER/SELECT

J901AUX

CN902

(USB)

LED938,940,942(ILLUMINATION)

LSW9111

/ALBUM V2

/ALBUM v

LSW9106

/PAUSE

LSW906DSPL

/ SCRL

LSW905LSW9093

/REP

LSW9084

/SHUF

LSW9075

/ZAP

S901

S902

S903

LED936,S903SEEK +>

M

LED950,S902SOURCE/ OFF

LED932,S904

LED954,S906

LED933,934,S905m

.

SEEK -

S904

S905

S906

S907

R970

R980

R982

R984

R990

Barcode

1

2

19

20

1

1617 32

33

484964

Q901Q905Q9

03

IFM1

IFM2

IFM3

IFM4

IFM6

FB901

FB902

FB90

3

R901

R902

R904

R905

R906R907R908

R909

R910

R961

R915

R916

R917

R918

R919

CN901

R922

R923

R924

R925

R926

R927

C901 C902C903

R940

C904

R942

C906

R944C9

09

R948

C910

C911

C912

R950

C915

C916

R956

R958

R966

R968

R972

R974

R976

R986

R988

R991

R992R993R994R995R996

R997

R998

R999

D901

D902

D911

D912

D916

RE901

IC902

CN902

J901

A

MAIN BOARD CN102

(Refer to page 25 on original service manual (except Saudi Arabia model) or page 4 on supplement-1 (Saudi Arabia model))

KEY BOARD (SIDE A)

KEY BOARD (SIDE B)

1-884-821- (21, 22)

21, 22

1-884-821-

LSW912AF/TA/ PTY(AEP, RU, UK)

PTY(EXCEPT AEP, RU, UK)

(21, 22)

21, 22

1

A

B

C

D

E

F

G

H

I

2 3 4 5 6 7 8 9 10 11 12 13 14• : Uses unleaded solder.2-1. PRINTED WIRING BOARD – KEY Board –

Note: Refer to the servicing notes “NOTE FOR REPLACEMENT OF THE USB CONNECTOR (CN902) AND THE AUX JACK (J901)” on page 4 on original service manual, if replacing CN902 and J901.



44

D

A

9 11

G

C

1 72 10

H

1364

B

E

85

F

I

3 12

BOARD

(Refer to page 28 on original service manual)

(3/5)CN102

AMAIN

2.6

5.1

5.1

2.6

0.1

0.1

0.1

0.1

5.1

5.1

5.1

5.2

5.1

2.62.62.62.62.62.62.65.23.41.7

2.64.80.13.30.2

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.62.62.62.62.62.62.62.62.62.62.62.62.62.62.6

5.1

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

2.6

(AEP,RU,UK)*1

(EXCEPT AEP,RU,UK)

*2

*1

*1

*1

*1*1 *1

*1

*1

*1*1

*1

(AEP,RU,UK)(EXCEPT AEP,RU,UK)

*2

*2

*3

*3

*3*3

*4 *4 *5

*3

*3

*5

*6

*4

*7

*7

*7

*7

*8

*9

(AEP,RU,UK)

(EXCEPT AEP,RU,UK)

(EXCEPT AEP,RU,UK)

*3(AEP,RU,UK)

(AEP,RU,UK)*4

(EXCEPT AEP,RU,UK)

*5


(AEP,RU,UK)*6

(EXCEPT AEP,RU,UK)

(AEP,RU,UK)*7

(EXCEPT AEP,RU,UK)

*8


(AEP,RU,UK)*9

(EXCEPT AEP,RU,UK)

IC902

IC901

1MR904

C9040.47

R902150

R901150

R903100

R920820

R9211k

R9221k

R9231.2k

R9241.5k

R9251.8k

2.2kR926

R991820

R9921k

R9611.5k

R9931k

R9941.2k

R9951.5k

R9961.8k

R9972.2k

R908120

R909120

R910120

R984

R9190

470R916

470R917

R980

S907

S902

S901

S903

S904

S906

S905

R906

27R9

0727

RT1N140C-TP-1Q901

FB903

FB901

FB902

J901

VCC

OUT

GND

IC902PNJ4813M01S0

LSW9053 1

24

5

6

3 1

24

5

6

3 1

24

5

6

LSW906

LSW907

LSW908

LSW909

LSW910

LSW911

LSW912

1kR998

RKZ6

.8B2

KGP1

D916

RKZ6

.8B2

KGP1

D912

RKZ6

.8B2

KGP1

D911

RT6N140C-TP-1Q903

R944

R9420

0R905

LED9

54

LED9

50LE

D952

LED9

46

LED9

42LE

D944

LED9

38LE

D940

LED9

34LE

D936

LED9

32

R982

R986

R988

R990

R950

R952

R946

R948

R940

R972

R974

R966

R968

R954

R956

R958

1000pC915

1000pC916

20PCN901

1USB_GND2USB_VBUS3D-4D+5GND6KEY_GND7AUX_L8AUX_R9AUX_GND

10RE_011RE_112KEY_113KEY_014SIRCS15LCD_DATA16LCD_CE17LCD_CLK18ILL(FP+B)19PANEL_SW20GND

NESW

505D

T-A0

-UV

LED9

01

D902

RKZ5

.1B2

KGP1

R9180

0R999

0R927

12

34

4PCN902

RE901

R970

0R976

DA2J

1010

0LD9

01

470R915

C910

18p

C909

18p

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

171819202122

29282726252423

303132

33343536373839404142434445464748

49505152535455565758596061626364

PT6587-LQIC901

DIMMER BACK

-LIG

HTCO

LOR1

COLO

R2SE

G48

SEG4

7SE

G46

SEG4

5SE

G44

SEG4

3SE

G42

SEG4

1SE

G40

SEG3

9SE

G38

SEG3

7

SEG36SEG35SEG34SEG33SEG32SEG31SEG30SEG29SEG28SEG27SEG26SEG25SEG24SEG23SEG22SEG21

SEG2

0SE

G19

SEG1

8SE

G17

SEG1

6SE

G15

SEG1

4SE

G13

SEG1

2SE

G11

SEG1

0SE

G9SE

G8SE

G7SE

G6SE

G5

SEG4SEG3COM4COM3COM2COM1SEG2VDDVDD1VDD2VSSSEG52INHLCD_CELCD_CLKLCD_DATA

LCD901

15

67

89

1011

1213

1415

1617

1819

2021

2223

2425

2627

2829

3031

3233

3435

3637

3839

4041

4243

4445

4647

4852

24

4951

350

C911

18p

C901 0.1C902 0.1

0.1C903

C9060.1

C912

0.1

S[1]

S[2]COM[1]COM[2]COM[3]COM[4]S[3]S[4]

S[5]

S[6]

S[7]

S[8]

S[9]

S[10

]S[

11]

S[12

]S[

13]

S[14

]S[

15]

S[16

]S[

17]

S[18

]S[

19]

S[20

]

S[21]S[22]S[23]S[24]S[25]S[26]S[27]S[28]S[29]S[30]S[31]S[32]S[33]S[34]S[35]S[36]

S[1]S[2]S[3]S[4]S[5]S[6]S[7]S[8]S[9]

S[10]S[11]S[12]S[13]S[14]S[15]S[16]S[17]S[18]S[19]S[20]S[21]S[22]S[23]S[24]S[25]S[26]S[27]S[28]S[29]S[30]S[31]S[32]S[33]S[34]S[35]S[36]S[37]S[38]S[39]S[40]S[41]S[42]S[43]S[44]S[45]S[46]S[47]S[48]

COM[4]COM[3]COM[2]COM[1]

S[48

]S[

47]

S[46

]S[

45]

S[44

]S[

43]

S[42

]S[

41]

S[40

]S[

39]

S[38

]S[

37]

DATACE

CLK

CECLKDATA

KEY BOARD

VBUS-USB

(USB)

D+D-

GND-USB

SEEK

+

SEEK

-

(ILLUMINATION)LED938,940,942,944

PTY

SOURCE/ OFF

/

OFF

SOUR

CEMO

DE

SELECTPUSH ENTER/

SEEK+

SEEK-

MODE

/ SCRLDSPL

6/PAUSE

5/ZAP

4/SHUF

3/REP

LED DRIVE

LCDBACK LIGHT

DRIVE

RT1N140C-TP-1Q905

DIMMERSWITCH

(LCD

BAC

K LI

GHT)

REMOTE CONTROLSIGNAL RECEIVER

LCD CONTROL

LIQUIDCRYSTALDISPLAY

PANEL

AUX

2/ALBUM

1/ALBUM

LED932,934,936,938,940,942,944,946,950,952,954SML-D12P8WT86TK

R940,944220820

SML-D12V8WT86TN

AF/TA/ PTY

1k

R946,950,954,956,970,972270

1.2k

R948,952,968330

1.2k

R958,974270

1k

R966330

150

R980,982,984,986100

220

R988150

220

R990180

3 1

24

5

6

3 1

24

5

6

3 1

24

5

6

3 1

24

5

6

3 1

24

5

6

2-2. SCHEMATIC DIAGRAM – KEY Board –

Note: Refer to the servicing notes “NOTE FOR REPLACEMENT OF THE USB CONNECTOR (CN902) AND THE AUX JACK (J901)” on page 4 on original service manual, if replacing CN902 and J901.

5









LED946 6-502-193-11 LED SML-D12V8WT86TN (Z) (EXCEPT AEP, RU, UK)

LED946 6-502-325-11 LED SML-D12P8WT86TK (Z) (AEP, RU, UK) LED950 6-502-193-11 LED SML-D12V8WT86TN (SOURCE/OFF)

(EXCEPT AEP, RU, UK) LED950 6-502-325-11 LED SML-D12P8WT86TK (SOURCE/OFF)

(AEP, RU, UK) LED952 6-502-193-11 LED SML-D12V8WT86TN (MODE)


LED952 6-502-325-11 LED SML-D12P8WT86TK (MODE) (AEP, RU, UK) LED954 6-502-193-11 LED SML-D12V8WT86TN ( )

(EXCEPT AEP, RU, UK) LED954 6-502-325-11 LED SML-D12P8WT86TK ( ) (AEP, RU, UK)

< SWITCH >

LSW905 1-798-283-11 TACTILE SWITCH (WITH LED) (DSPL/SCRL) (AEP, RU, UK)

LSW905 1-798-287-11 TACTILE SWITCH (WITH LED) (DSPL/SCRL) (EXCEPT AEP, RU, UK)

LSW906 1-798-283-11 TACTILE SWITCH (WITH LED) (6/PAUSE) (AEP, RU, UK)

LSW906 1-798-287-11 TACTILE SWITCH (WITH LED) (6/PAUSE) (EXCEPT AEP, RU, UK)

LSW907 1-798-283-11 TACTILE SWITCH (WITH LED) (5/ZAP) (AEP, RU, UK)

LSW907 1-798-287-11 TACTILE SWITCH (WITH LED) (5/ZAP) (EXCEPT AEP, RU, UK)

LSW908 1-798-283-11 TACTILE SWITCH (WITH LED) (4/SHUF) (AEP, RU, UK)

LSW908 1-798-287-11 TACTILE SWITCH (WITH LED) (4/SHUF) (EXCEPT AEP, RU, UK)

LSW909 1-798-283-11 TACTILE SWITCH (WITH LED) (3/REP) (AEP, RU, UK)

LSW909 1-798-287-11 TACTILE SWITCH (WITH LED) (3/REP) (EXCEPT AEP, RU, UK)

LSW910 1-798-283-11 TACTILE SWITCH (WITH LED) (2/ALBUM v) (AEP, RU, UK)

LSW910 1-798-287-11 TACTILE SWITCH (WITH LED) (2/ALBUM v) (EXCEPT AEP, RU, UK)

KEY BOARD **********

< CAPACITOR >


C909 1-162-918-11 CERAMIC CHIP 18PF 5% 50V C910 1-162-918-11 CERAMIC CHIP 18PF 5% 50V C911 1-162-918-11 CERAMIC CHIP 18PF 5% 50V C912 1-100-597-91 CERAMIC CHIP 0.1uF 10% 25V C915 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V


< CONNECTOR >

CN901 1-842-265-22 PLUG, CONNECTOR 20P

< DIODE >

D901 6-502-961-01 DIODE DA2J10100L D902 6-503-202-01 DIODE RKZ5.1B2KGP1 D911 6-503-205-01 DIODE RKZ6.8B2KGP1 D912 6-503-205-01 DIODE RKZ6.8B2KGP1 D916 6-503-205-01 DIODE RKZ6.8B2KGP1

< FERRITE BEAD >

FB901 1-414-385-21 INDUCTOR, FERRITE BEAD FB902 1-414-385-21 INDUCTOR, FERRITE BEAD FB903 1-414-385-21 INDUCTOR, FERRITE BEAD

< IC >

IC901 6-718-506-01 IC PT6587-LQ

< LED >

LED901 6-503-227-01 LED NESW505DT-A0-UV (LCD BACK LIGHT) LED932 6-502-193-11 LED SML-D12V8WT86TN ( )

(EXCEPT AEP, RU, UK) LED932 6-502-325-11 LED SML-D12P8WT86TK ( ) (AEP, RU, UK) LED934 6-502-193-11 LED SML-D12V8WT86TN (m . SEEK –)

(EXCEPT AEP, RU, UK) LED934 6-502-325-11 LED SML-D12P8WT86TK (m . SEEK –)

(AEP, RU, UK)

LED936 6-502-193-11 LED SML-D12V8WT86TN (SEEK+ > M) (EXCEPT AEP, RU, UK)

LED936 6-502-325-11 LED SML-D12P8WT86TK (SEEK+ > M) (AEP, RU, UK)



KEY

Note:• Due to standardization, replacements in

the parts list may be different from the parts specifi ed in the diagrams or the com-ponents used on the set.

• -XX and -X mean standardized parts, so they may have some difference from the original one.


• RESISTORS All resistors are in ohms. METAL: Metal-fi lm resistor. METAL OXIDE: Metal oxide-fi lm resistor. F: nonfl ammable• CAPACITORS uF: μF• COILS uH: μH When indicating parts by reference num-

ber, please include the board name.

• SEMICONDUCTORS In each case, u: μ, for example: uA. . : μA. . , uPA. . , μPA. . , uPB. . : μPB. . , uPC. . , μPC. . , uPD. . : μPD. .• Abbreviation RU : Russian model

3. ELECTRICAL PARTS LIST



6

LSW911 1-798-283-11 TACTILE SWITCH (WITH LED) (1/ALBUM V) (AEP, RU, UK)

LSW911 1-798-287-11 TACTILE SWITCH (WITH LED) (1/ALBUM V) (EXCEPT AEP, RU, UK)

LSW912 1-798-283-11 TACTILE SWITCH (WITH LED) (AF/TA/PTY) (AEP, RU, UK)

LSW912 1-798-287-11 TACTILE SWITCH (WITH LED) (PTY) (EXCEPT AEP, RU, UK)

< TRANSISTOR >

Q901 8-729-038-22 TRANSISTOR RT1N140C-TP-1 Q903 6-551-392-01 TRANSISTOR RT6N140C-TP-1 Q905 8-729-038-22 TRANSISTOR RT1N140C-TP-1

< RESISTOR >

R901 1-216-811-11 METAL CHIP 150 5% 1/10W R902 1-216-811-11 METAL CHIP 150 5% 1/10W R903 1-216-809-11 METAL CHIP 100 5% 1/10W R904 1-216-857-11 METAL CHIP 1M 5% 1/10W R905 1-216-864-11 SHORT CHIP 0


R915 1-216-817-11 METAL CHIP 470 5% 1/10W R916 1-216-817-11 METAL CHIP 470 5% 1/10W R917 1-216-817-11 METAL CHIP 470 5% 1/10W R918 1-216-864-11 SHORT CHIP 0 R919 1-216-864-11 SHORT CHIP 0


R925 1-216-824-11 METAL CHIP 1.8K 5% 1/10W R926 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R927 1-216-295-91 SHORT CHIP 0 R940 1-216-813-11 METAL CHIP 220 5% 1/10W





(EXCEPT AEP, RU, UK) R946 1-216-814-11 METAL CHIP 270 5% 1/10W















R961 1-216-823-11 METAL CHIP 1.5K 5% 1/10W R966 1-216-815-11 METAL CHIP 330 5% 1/10W












(AEP, RU, UK)












R991 1-216-820-11 METAL CHIP 820 5% 1/10W R992 1-216-821-11 METAL CHIP 1K 5% 1/10W R993 1-216-821-11 METAL CHIP 1K 5% 1/10W R994 1-216-822-11 METAL CHIP 1.2K 5% 1/10W

R995 1-216-823-11 METAL CHIP 1.5K 5% 1/10W

KEY

Ref. No. Part No. Description Remark


7

R996 1-216-824-11 METAL CHIP 1.8K 5% 1/10W R997 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R998 1-216-821-11 METAL CHIP 1K 5% 1/10W R999 1-216-295-91 SHORT CHIP 0

< SWITCH >

S901 1-798-284-11 TACTILE SWITCH (Z) S902 1-798-284-11 TACTILE SWITCH (SOURCE/OFF) S903 1-798-284-11 TACTILE SWITCH (SEEK+ > M) S904 1-798-284-11 TACTILE SWITCH ( ) S905 1-798-284-11 TACTILE SWITCH (m . SEEK –)

S906 1-798-284-11 TACTILE SWITCH ( ) S907 1-798-284-11 TACTILE SWITCH (MODE)

KEY


REVISION HISTORY

Checking the version allows you to jump to the revised page.Also, clicking the version at the top of the revised page allows you to jump to the next revised page.

Ver. Date Description of Revision1.0 2011.07 New

1.1 2011.08 Addition of CDX-GT42UE

Addition of Korean model (CDX-GT45U)

1.2 2011.11 Addition of AEP and UK models (CDX-GT44U)

Addition of Saudi Arabia model (CDX-GT45U)

Addition of PRINTED WIRING BOARD – MAIN board for Saudi Arabia model – (SUPPLEMENT-1)

1.3 2012.06 Specifi cation change of MG-101CA-188

Change of LCD driver IC (Ref. No. IC901), and change of other parts accompanying the change

Change of KEY board (Suffi x-21/-22) (SUPPLEMENT-2) (SMR-11052/11053)

1.4 2012.07 Changing parts supply classifi cation of Ref. No. IC601 on the MAIN board

Change of Part for Ref. No. D530, IC301, IC1300, L1300, Q401 to Q406, R402, R404, R407, R410, R421

and R423 on the MAIN board

Change of Part No. for Ref. No. C1304, CN301, J1 and TU901 on the MAIN board

Change of Part No. for Ref. No. X501 on the MAIN board (Except Saudi Arabia model)

Deletion of Part for Ref. No. C741, C743, C745, CN501 and CN601 on the MAIN board

Change of MAIN board (Suffi x-22) (Except Saudi Arabia model) (SMR-12025)

sony cdx-gt45u

Documents