1

Installation of Set Top Box (STB)Installation of Set Top Box (STB)Model:Model: S-Box7203S-Box7203

2

STB = Set Top BoxSTB = Set Top Box

What is STB?

3

Analog Signal

Why do we need STB?Why do we need STB?

STB encode/decode the digital signal and provide the TV set with known analogue signal.

Digital Signal

4

STB hardware Connection GuideSTB hardware Connection Guide

5. Connect the audio cable

5. Connect the audio cable

4. connect the network cable4. connect the network cable6. Connect the power

cord.6. Connect the power

cord.

1. Connect the power.1. Connect the power.

2. Connect the DSL line

2. Connect the DSL line

3. Turn on the Modem

3. Turn on the Modem

TVTV

STBSTB

HG 510HG 510

5

Configuring STB Through Configuring STB Through

SET Command SET Command

STB STB RemoteRemote

6

Displaying the Configuration Page Displaying the Configuration Page

• By pressing the SET button will get the above login page

• Enter the password (8288 by default)

• Get the configuration main menu.

7

Configuration main menu Configuration main menu

8

• Saving the Configuration Saving the Configuration

All changes need a password password 30083008 to be saved. If "successful!" is displayed, it indicates that the configurations have been successfully saved. If "password error!" is displayed, enter the correct

password and try to save again.

9

• 1 - Network Configuration 1 - Network Configuration

The STB has three network access modes: Static IP, DHCP, and PPPoE. We can select one of them so as to match the type of network access provided at your premises.

10

• Static IP Static IP

Enter the following Parameters:

• IP address

• Subnet mask

• DNS address

• Gateway address

• IGMP version of the switch (this item needs to be configured for multicast

services)

11

Static IP configuration page Static IP configuration page

(IGMP - (IGMP - Internet Group Management Protocol) Internet Group Management Protocol)

12

• PPPoE PPPoE

We need to configure the following parameters:

PPPoE user name : xxxxx@ptcl-iptv PPPoE password : xxxxx IGMP version : IGMP v2 (Internet Group Management Protocol)

PPPoE configuration page PPPoE configuration page

13

2 - Browser Configuration 2 - Browser Configuration

14

Browser Configuration Browser Configuration

• Home page:Home page:It is the first Web page displayed when the STB is turned on. Usually, it is the EPG page.

http://203.99.161.14:8082/EDS/jsp/index.jsp. http://203.99.161.14:8082/EDS/jsp/index.jsp.

• Entry:Entry: we can select BTV or EPG. If BTV is selected, the TV will display the last channel you watched last time. If EPG is selected, the TV will display the first page of EPG.

• Region:Region: • Select a region, the warning language of STB will be

changed to the language of the region you selected.

15

3 - TV Standard Configuration3 - TV Standard Configuration

16

TV Standard ConfigurationTV Standard Configuration

• In the TV standard configuration, we can select TV standard and set video display region and other parameters,

• TV standard: We can select PAL or NTSC according to the EPG standards the ISP provided and your local TV standard.

• Top margin: The margin between the video display area and the top margin of the TV.

• Left margin: The margin between the video display area and the left side margin of the TV.

• Width:The width of the video display area.

• Height: The height of the video display area.

17

4 - Time Configuration 4 - Time Configuration

In the time configuration, set the time information of STB • Cur time: The current time displayed• Time zone: 5 • Ntp time server: 203.99.161.89 • Note: Please, insert the correct time zone and NTP, server without

these settings TSTV will not work.

(NTP - Network Time Protocol)(NTP - Network Time Protocol)

18

5 - Software Information of STB5 - Software Information of STB

19

6 - Hardware Information of STB 6 - Hardware Information of STB

20

7 - Upgrade Software of STB 7 - Upgrade Software of STB

This page lists the configuration for the auto upgrade of the STB.This page lists the configuration for the auto upgrade of the STB.We need to enter the upgrade address, as shown above. We need to enter the upgrade address, as shown above.

21

8 - Identity Information of STB 8 - Identity Information of STB

This page lists the identity information of the STB, including the MAC address and the product serial number. These parameters are set by the factory and cannot be changed.

22

9 - Restore Parameter9 - Restore Parameter

23

CA card InstallationCA card Installation(CA- Conditional Access)(CA- Conditional Access)

• Smartcard Smartcard

The Smartcard with metal chipset down side has to insert into slot on front panel of STB. When the STB is switched on it authenticates the username and password associated with that particular CA card.

The user will not be able to view any services without entering of the IRDETO (encryption) CA card.

IRDETO provide CA Security Solution for Digital TV, IPTV and mobileI.R. DE TOONDER the developer of M-Net decoder