THE UNIVERSITY OF HONG KONGLIBRARIES

Hong Kong Collectiongift from

Hong Kong (China). Lands Dept.

1:1000 Basic MappingSpecification

Official Copy No.: 200

Survey & Mapping Office, Lands Department© Government of Hong Kong SAR

BIB.REC.NO.

DATE REC'D

CLASS NO.

AUTHOR NO.

AMENDMENT NOTES

No. Date Page No. Description

Contents

PrefaceIntroduction i - viSurvey & Mapping Specifications Al - W4BMS Colour Check Plot Legend 1 - 3Index 1-4

Preface

The last edition of the 1:1000 Basic Mapping Specification was published in

December 1991 before the Land Information System (LIS) was fully implemented.

It was presented in three parts, namely the Survey Specification, Cartographic

Specification and Land Information Centre (LIC) Mapping Specification. In March

1994, while the data conversion was still in progress, the Land Information Centre

published the Basic Mapping System (BMS) Specification to provide the necessary

guidelines on how to update the map data captured in the LIS Basic Mapping System.

Since then, the BMS database has become the core data set for all applications using

the Geographic Information System (GIS) technology in Hong Kong. The BMS

Specification has widely been used by all involved in topographical surveys, BMS

database updating and GIS applications.

This new edition of the 1:1000 Basic Mapping Specification is presented in the same

format adopted for the BMS Specification. The contents have also been revised to

reflect the changes in survey requirements and cartographic presentations over the

years. This edition has been prepared with its main objectives of clarifying:

(a) what to do in the field to survey the ground features; and

(b) how to encode the features for updating the BMS database.

The new edition was completed as a result of the concerted effort of the working

group formed under the BMS Policy Meeting. The members of the working group

came from various offices with different topographical survey and mapping

experiences. They are:

SLS/LS: Ho Wing-kun, Sin King-kau, Sung Hon-kwong, Chang Kwok-fai;

SCgr/Cgr: Cheung Chung-tong, Grace Lee; and

PSO(L): Lo Kam-chiu, Mak £au-hon, Pun Kwong-chiu.

The working group has resolved all the ambiguities arising out of the lack of a

comprehensive set of guidelines and the misinterpretation of instructions from various

sources. I am sure this new edition of the 1:1000 Basic Mapping Specification will

provide all the necessary guidelines on how to conduct topographical surveys and

BMS database updating for many years to come.

Wong Chung-hangChairman, BMS Policy Meeting

January 2002

Introduction

Maps are, no doubt, the most effective means of conveying geographic information. However,to represent natural and artificial features of the earth effectively on a plane surface,consideration must be given to the purpose and scale of the map, users' requirements and thelimitations of map-making. These, in turn, determine the types and amount of survey data tobe collected and the methods of cartographic representation. Consideration must also be givento the requirements of a digital map base, which would need much more data than aconventional paper map to make it a useful base for various Geographic Information Systemapplications.

As the basic map of the Hong Kong SAR, one would expect that the 1:1000 Basic MappingSystem (BMS) would provide as much information as possible. It needs to strike a balancehere so that the data and graphics so selected for display on the map face are legible,unambiguous and easy to interpret.

The "1:1000 Basic Mapping Specification" attempts to set guiding principles for representingdata both on the map face and in the database of the Basic Mapping System. The layering,feature coding and annotation of the ground features in the Specification are referred to theformat currently in use in the BMS of the Survey and Mapping Office, Lands Department.For detail operation and data structure, please refer to the Basic Mapping System OperationManual and the Basic Mapping System Data Dictionary.

ObjectivesThe aims of this Specification are:1. To lay down guidelines for the selection of features to be surveyed and data to be

collected in the field.2. To standardize the cartographic presentation and symbolization of ground features and

lettering.

Layout of SpecificationThis Specification lists features to be surveyed in alphabetical order. Given under each item,from the top are - Feature Name, Feature Layer, Feature Code, Annotation, Anno Layer,Anno Level, and Anno Size. There is supplementary information under the GeneralGuidelines and Note for most of the features.

1. Feature Name (in Bold)Feature name refers to the name of a natural or man-made feature. The Chinese name isalso given.

2. Feature LayerThis is the BMS layer in which the feature is to be stored. If the feature is a compositeitem, then no feature layer is specified, e.g. Airport, Container Terminal, etc.

3. Feature CodeThe feature code has a string consisting of not more than three characters forming aunique reference to the line/point/symbol of the feature.

4. AnnotationThis is the descriptive text of the feature. It describes the nature, usage or name of afeature.

5. Anno LayerThis is the BMS layer in which annotations are to be stored. The annotations, in bothEnglish and Chinese, have different levels and sizes.

6. Anno LevelThis shows the level of annotation to be stored.

7. Anno SizeThis shows the character size of the annotation to be used.

8. General Guidelines / NoteThis contains guidelines and supplementary information for survey requirement andcartographic presentation.

9. Graphic RepresentationTwo diagrams are used to illustrate how a feature should be represented. The colourdiagram is the check plot, whereas the black and white diagram is the survey sheet plot.

10. Convention UsedFeatures that are part of a main feature are grouped under that main feature. For instance,podium and staircase are grouped under "Building". Features of similar nature aregrouped together with reference made in the individual item.

Some features are composed of multiple features that should be stored in various layers.These layers are separated by slashes ( / ) . Feature codes under the corresponding layersare also separated by slashes ( / ) , while feature codes of the same layer are separated bycommas ( , ). For instance, an "Artificial Slope" may contain features that are stored infour layers, namely, "RELIEF, ROAD, SLOPE and MISCLINE". Each layer may alsocontain one or more feature code. The following is an example:

ARTIFICIAL SLOPE Al^Mft l Layers of an artificialX slope

Feature Layer:Feature Code: / PA / SLOPE / PEC

t Feature codes T Feature coder.nrrpc:nnnHinn tn thp I COrreSDOndiriQcorresponding to the I corresponding to theRELIEF layer MISCLINE layer

11

Annotations are stored in Anno Levels of various layers. Usually, English annotations arestored in levels ranged from "1 to 5", while Chinese annotations are stored in levelsranged from "101 to 105". Semicolons ( ; ) are used to separate English and ChineseAnno Levels of the feature. Square brackets ( [ ] ) contain variable annotations. Thefollowing example shows how the annotation details of a school and the buildings insideare specified:

SCHOOL ^

Annotation: [Name of School] / [Name of Building] — [ ] indicates a variableAnno Layer: GENANNO / BLDGPOLYAnno Level:Anno Size:

3; 103 (University) or 4; 104 (Others) /1; 101> 1.5 - 2.2 mm; 2.0 - 3.5 mm /1.5 mm; 2.2

Anno Levels and SizesA i , -10- * u j A -i u * A- are to be adopted whenAnno Levels and Sizes are to be adopted when annotations onn^totiono or^ i™,,*

. . . ,. ^-vr-K i A K IK I^-N i di II lOldUUi Ib die lliUUlare input into the GENANNO layer. j t th BLDGPOLY"3 & 4" are the Anno Levels and "1 .5 - 2.2 mm" is the Anno ""Size for English annotation. ,, • tn A . ,"103 & 104" are the Anno Levels and "2.0 - 3.5 mm" is the ' H M U mT" ic thoA — .. r ^, . , ,. dllU I .O illill lo III"Anno Size for Chinese annotation. Anno Sjze for Eng|ish

annotation."101" is the Anno Leveland "2.2 mm" is theAnno Size for ChineseAnnotation.

Feature SelectionThe general principle of surveying is to record "what is seen in the field". As it is impossibleto show everything, features not stated in this Specification are to be ignored. However, ifthese features are considered prominent or whenever there is doubt regarding selection,representation, generalization, annotation etc., users can refer them to the Basic MappingSystem Policy Meeting for further clarification and consideration. It should also be pointedout that this Specification does not include all kinds of usage for buildings or sites (e.g.factory, warehouse, garden etc.). Such omission does not imply that these buildings or sitesneed not be shown and annotated.

Feature Representation1. Ground Feature

According to their nature and size, ground features are represented by one of these: line,point, symbol and area. If two linear features coincide on plan, for instance, a fence builton top of a wall or an overhanging structure overlaps with the road margin, display thedominant feature and suppress the other. In general, features underneath are to besuppressed unless otherwise stated in this Specification. The general hierarchy ofdominance is - Building, Boundary Feature, Railway, Road, Relief, Miscellaneous Lineor Point, and Contour.

in

2. Features under Elevated StructureIn general, features under elevated structures, except those in private areas should besurveyed especially for those prominent features with public interest. Annotate theirusage in brackets. Show the graphics by special feature codes such as "RMU", "PAU","BUP" etc. as appropriate. Other major details such as fence, utility features, etc. shouldbe shown in suppressed mode by changing the 'DISP' field at the attribute table notequal to "0". Also, the corresponding annotations should be suppressed by changing theAnno Level to "0".

3. Height Information• On natural ground, retain existing contour lines or provide new ones to depict the actual

terrain wherever possible. Provide sufficient spot heights so that the topography can beproperly represented. Height information should be retained and suppressed if they areunder elevated structures. On artificial features such as roads, paved areas, podiums etc.,sufficient spot heights should be provided to indicate significant changes in gradient.

4. AnnotationIn principle, annotation serves to indicate the name, nature or usage of a feature. It is alsoused to denote address. Nevertheless, care should be taken not to over annotate to avoidgiving superfluous information especially when symbols have already been used.

a) According to the importance, nature of the feature, or both, annotations are put intodifferent layers under different annotation sub-classes or levels. For those thatcannot be categorized under a layer, they will be placed in the GENANNO layer andat appropriate Anno Level.

b) Generally, all specific names of buildings should be annotated (at the annotationsub-class) in the BLDGPOLY layers. Other generic names and usage such as"Multi-storey Car Park", "Bus Terminus under", "Burial Urns", "TS" etc. would beput in various layers according to their related features. For instance, "Burial Urns"would be put in MISCLINE layer; "TS" would be put in BLDG layer and "ESS" inGENANNO layer.

c) Symbols for Dangerous Goods Store ( [Djj8] ) and Declared Monument ( & ) arestored at Level 5 in the GENANNO layer. The symbol for Swimming Pool ( 4* ) isstored in the RELIEF layer and Toilet ( ffl ) in the BLDG layer.

d) The position of annotation should be reasonably close to the feature it refers to.(1) For point feature, it should preferably be placed at the northeast corner.(2) For linear feature, it should be placed along the alignment or parallel and within

the feature for road or footpath if there is space.(3) For polygon feature, it should be placed near the centre and parallel to the base

of the feature or the grid line.

e) If a feature spreads beyond the border of the map sheet, place the annotation on thesheet that shows the larger portion of the feature.

f) The lettering of a word should never be upside down or with space between letters.

IV

g) "Helvetica font" is used for English annotations. "UF Hei (j$jM)" is used forChinese annotations. The "upright" style is used for all except hydrographic featuresfor which "italic" is used.

h) Avoid overlapping annotations with graphics or gridlines. If overlapping isinevitable, suppress the graphic to make room for the annotation.

i) Show both English and Chinese annotations if there is sufficient space, otherwisethe shorter annotation, usually the Chinese, should have priority. If the space isinsufficient even for Chinese annotation, then annotate the usage as appropriate, andinput the full name into the Lookup Tables.

j) Some symbols such as FP, L, ET, CUL, H etc. are input as annotations into theirrespective layers. Full annotation is not required. All such abbreviations should be inupper case and no Chinese character is required.

k) Long annotation should always be kept as one single entry. Use the backslash toforce a line break.

1) Annotate buildings and sites with their proper names if available, e.g. Ming WahBuilding, Taikoo Shing, Wong Tai Sin Estate, etc. If there is no proper name,annotate its usage such as Factory, Garage, Multi-storey Car Park, Open Storage etc.

m) Annotation can be in upper case or in upper and lower case. The following are someguidelines:(1) For road and place names, all letters should be in upper case, e.g.

HOLLYWOOD ROAD, GREEN ISLAND, etc.(2) For site name, according to its importance, the annotation can be all in upper

case (GENANNO Level 3), e.g. TAIKOO SHING, DYNASTY HEIGHTS, etc.or in upper and lower case (GENANNO Level 4), e.g. Sha Tin Heights, TsuenWan Plaza, etc.

(3) All building names must be in upper and lower cases, e.g. Hong KongConvention and Exhibition Centre, Passenger Terminal Hong Kong Airport, etc.

(4) The first letter of each descriptive word should be capitalized, e.g. Multi-storeyCar Park, Covered Service Reservoir, etc. except if a phrase is used such as"Home for the Aged" etc.

5. Background Textual Information (Attributes)Textual information collected in the field, such as place name, estate name, address,building name or usage are stored in the Lookup Tables. Some can enrich features bydenoting their status or type while others are supplement information that will not beshown on the map. Therefore, annotations on the map may be different from thecorresponding information stored in the Lookup Table.

6. Proposed FeaturesMajor infrastructures still at the design or construction stage are regarded as proposedfeatures.

Data AccuracyThe accuracy of the planimetric information varies according to the source of data. Eachfeature is thus assigned with the precision code in its respective layer to denote the level ofpositional accuracy. The following is a list of source of data and the accuracy attainedapproximately:

Source of DataCadastral surveyTopographical surveyMachine plots by Photogrammetric UnitOld paper map

Horizontal (±)0.1 m0.2m0.3m1m

Vertical (±)-

O . l m0.4m

-

The Way ForwardAs we enter into the third millennium, not only has map-making been revolutionized with theintroduction of computer technology, map users have also radically changed their attitude andexpectations of map products. In order to cater for the ever-changing needs and demands ofmap users, this Specification will inevitably have to be revised and updated continuously inthe years to come.

VI

AERIAL ROPEWAY (See also PYLON.)

MISCLINEFIRAerial Ropeway;MISCLINE1; 1011.5 mm; 2.2 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show two outmost limits of ropes in firm line as "FIR".(b) Treat aerial tower of ropeway as pylon.

supporting/ arm

-FIR

Aerial Ropeway

AIRPORT

[Proper name]GENANNO3; 103 (Major), 4; 104 (Minor)3-5 mm; 4-6 mm

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Annotate usage of open field, runway, taxiway etc. in the airport accordingly.(b) Annotate buildings by their names.(c) Refer to appropriate items for other details of the airport.

1. AEROBRIDGEFeature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

ROADFBRAerobridge; Jfs^ROAD3; 1031.5 mm; 2.2 mm

Al

Note:Show the aerobridge as walkway and exclude the mobilized portion.

2. RUNWAY MFeature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

/TAXIWAYROADRMRunway; {EROAD3; 1031.5 -2.2 mm; 2.2 - 3.3 mm

orTaxiway; tffTx!

AMUSEMENT PARK

General Guidelines:(a) Show only permanent building and road.(b) Show the site of major amusement devices in pecked line and annotate. Do not show

individual game.(c) Show limits of park as defined by surrounding features, and refer other details in their

respective layer.

1. NAMED AMUSEMENT PARKAnnotation: [Proper Name]Anno Layer: GENANNOAnno Level: 3; 103 (Major), 4; 104 (Minor)Anno Size: 2.0 - 2.5 mm; 2.2 - 3.3 mm

2. UNNAMED AMUSEMENT PARKAnnotation: Amusement Park; *6| iiAnno Layer: GENANNOAnno Level: 5; 105Anno Size: 1.5 - 2.5 mm; 2.2 - 3.3 mm

ANCIENT TOMB (See also DECLARED MONUMENT.)

Annotation:Anno Layer:Anno LevelAnno Size:Note:(a) In general, underground structure is not shown except it is of public interest.(b) If an ancient tomb has no visible sign on ground, show the fenced area.(c) If an ancient tomb is a declared monument, place the symbol at entrance of the tomb.

[Proper name]GENANNO4; 1042.0-3.0 mm; 2.5-4.0 mm

A2

ANTENNA ^PYLON.)

Feature Layer:Feature Code:Annotation:Anno Layer:Anno LevelAnno Size:

/ SATELLITE ANTENNA

MISCLINE / MISCPT / BLDGPOLYPY/DOT/BPAntenna; | or SA (Symbol)MISCLINE / MISCPT / GENANNO1; 101 or 1 /1 ; 101 or 1 /5 ; 105 or 51.5 mm; 2.2 mm or 1.5 mm

(See also POWER LINE

Note:(a) Do not show antenna on top of building.(b) Show only large individual antenna as pylon or building. Otherwise show as point with

annotation.(c) Show isolated satellite antenna in rural area and annotate it as "SA".

• ,"•; ; (or SA); <fy \ ; Antenna

\ Antenna (or SA)

AntennaoCode = DOT

(or SA)

Antenna

Antenna

Antenna

ARCADE (See COVERED WALKWAY.)

ARCHWAY

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level

MISCLINEPECARCH (Symbol)MISCLINE1

A3

Anno Size: 1.5mmNote:(a) If the archway is considered as a landmark, show the centre-line of the arch in pecked

line "PEC".(b) Do not show end markers.

ARCH

WL PEC WL

ARCH

ARTIFICIAL SLOPE A H^ttg / DOLOSSE $fi&5 I RUBBLE MASONRY/SLOPING MASONRY

Feature Layer: RELIEF / ROAD / SLOPE / MISCLINEFeature Code: ST, SB, VC / PA / SLOPE / PECNote:(a) Show artificial slope and sloping masonry by slope symbols. Do not show slope lower

than 1 .5 m in height.(b) If the slope is purely composed of rubble or dolosse, no slope symbol is required but

annotate it as rubble or dolosse. Treat irregular concrete rubble blocks forming a seawallas artificial slope.

(c) If the displacement is less than 1.5 m, treat artificial slope as vertical slope or retainingwall. Survey the top of slope in this case.

(d) Show the slope edge in pecked line except for masonry wall, which is shown as "PA". Ifthere is no dominant feature adjoining, show top of slope as "ST" and bottom of slope as"SB".

(e) Neglect berm if its width is less than 2 m.(f) Do not show footpath or steps that run across artificial slope and are less than 1 m wide,

except they are regarded as thoroughfare.(g) Show and space "slope symbols" according to spacing specification below. All slope

symbols should be offset from the slope top or slope bottom by 0.5mm.(1) Spacing:

4-6 mm apart for slope with displacement < 8 m6-10 mm apart for slope with displacement 8 - 25 m10-15 mm apart for slope with displacement 25 - 55 m15-20 mm apart for slope with displacement 55 - 100 m20 - 25 mm apart for slope with displacement 100 - 150 mOver 25 mm apart for slope with displacement over 150 m

(2) Slope symbols should follow the direction along the maximum gradient.

A4

T

8mm

..--^r"^ 1 1 p_t _^"f!"1 1 F

K—

TSB _^

1

1

f_ \

< 15mrn

Displacement

4— 6rnm 6— 10mm 0.5mm

A5

9V

i l

<'\_ j j 1 lilLli j y

03d

33d

ter

Ji. i 03d/

'". i I9S\ i /IS

\J*

AS

8S

8S |

IS

:86osn 95 puo j_s jo

AVIARY / MENAGERIE

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Show outline of the cage only. Do not show details inside.

MISCLINEPECAviary; Hfl or Menagerie;GENANNO5; 1051.5 mm; 2.2 mm

A7

BALCONY /VERANDAH (See BUILDING.)

BARBECUE AREA / PICNIC SITE

Barbecue Area; j^ilGENANNO5; 1051.5 mm; 2.2 mm

or Picnic Site;Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show the approximate limit of barbecue area and picnic site by ground feature or in

pecked line and annotate its usage.(b) Do not show barbecue facilities.

BARRED ACCESS (See also RESTRICTED ACCESS.)

Feature Layer: MISCPTFeature Code: VBNote:(a) Show the barred access symbol "VB" for permanent barrier at the entrance to an open

area such as a country park, catchment area etc.(b) Access with removable barrier is considered as "Restricted Access".

RM

SOUTH LANTAU ROAD

VB

mmm

SOUTH LANTAU ROAD

Bl

BASKETBALL COURT M$3% I TENNIS COURT

/ FOOTBALL FIELD /SKATING RINK

Usage NameGENANNO5; 1051.5 mm; 2.2 mm

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Define limits of Basketball Court, Football Field and Tennis Court, etc. by surrounding

ground features, otherwise in pecked line.(b) Do not show goal posts, railings, etc. inside the field.(c) Do not annotate multi-purpose sports ground.

BAZAAR

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Define limits of bazaar by its surrounding feature.(b) Annotate its proper name or general name.(c) Do not show temporary stalls inside the bazaar.

[Proper name] or Bazaar; rftHIGENANNO4; 104 (Named), 5; 105 (Unnamed)1.5 -2.2 mm; 1.8 - 3.0 mm

BEACH

POLYFEATSAN[Proper Name]GENANNO1; 101 (Major), 2; 102 (Minor)1.5-2.5 mm; 2.5-4.0 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) A beach is defined by surrounding features such as seawall, rocky area, High Water Mark

etc.(b) If no distinct feature exists, add an arbitrary line to form a closed polygon for the sand

boundary. Then add a label point inside the polygon and enter the feature code "SAN".(c) Only annotate the proper name of the beach if available in upper case.

B2

HW SAN

\

" QOLDENBEACH

/

, - ' GOIOEN BEACH /

v.,:..,* . /

BEACON / LIGHT

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show navigation beacon or light by point symbol "BEA".(b) If a light is built on a beacon, annotate it as "LT".

MISCPTBEABN (Symbol) or LT (Symbol)MISCPT11.3-1.5 mm

The annotation can be placed at 7 8 11 of the 8 standard positions 6 + 2around the label point, 5 4 3

BN LT

BICYCLE PARKING SPACE

Note:Show bicycle parking space as paved area and no annotation is required.

B3

BICYCLE TRACK

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show margins of the bicycle track. Otherwise, show dominant features such as RM, F,

andVC.(b) Margins are assumed to be pavement or road margin if they coincide with a road.(c) Do not show track margins inside subways.

ROADPABicycle Track; |ROAD3; 1031.5 mm; 2.2mm

TING KOK ROAD JT ft »RM

Bicycle Track

TING KOK ROAD 5JH]

Bicycle Track

BOARD WALK (See FOOTPATH.)

BORROW ARE A (See WORKS IN PROGRESS.)

BOULDER (See ROCK.)

B4

BOULDER BARRIER (See also FENCE.)

BDYFEAT / MISCLINEF/FIRBoulder Barrier;GENANNO5; 1051.5 mm; 2.2 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Show boulder barrier as fence if the width is less than 1 m. Otherwise show its boundary by"FIR".

Boulder Barrier

Boulder Barrier

CL pnprYnY ir ^

Boulder Barrier 86 5 til

Boulder Barrier

BREAKWATER

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

ROAD / RELIEFPA, RM / HWBreakwater; ^ / HWM (Symbol)GENANNO / RELIEF5; 105/I1.5- 2.2 mm /1.5 mm

Note:(a) Show the top of breakwater as defined by feature (normally paved) and bottom as "HW"

(High Water Mark) in pecked line.(b) Do not show sloping masonry. Do not show minor details on top of a breakwater except

navigation beacon or light.

HW-PA -

Breakwater

PA -HW •

LT Breakwater

HWM

•LT

B5

BRIDGE H (ROAD & RAIL) (See also FOOTBRIDGE & ELEVATED ROAD.)

Feature Layer: ROADFeature Code: FYAnnotation: [Proper name]Anno Layer: ROAD / GENANNOAnno Level: 2; 102 / 3; 103 (Major), 4; 104 (Minor), 5; 105 (Unnamed)Anno Size: 1.8 mm; 3.0mm /1.5 - 5.0 mm; 3.0 - 5.0 mmNote:(a) The outer limits of a bridge, elevated road or road bridge are surveyed. Bridge for

pedestrians only is shown as footbridge.(b) Annotate the name of the bridge and place it inside the road if the road passing through

has no name.(c) Annotate the name of the bridge and place it outside if the road crossing the bridge has a

name.(d) Do not show supporting columns that are partially or wholly under the bridge.(e) Show large bridge tower as building.

RV under elevated structuredrawn in suppressed mode

B6

BRIDGE TOWER

Feature Layer: BLDGPOLYFeature Code: BPAnnotation: Bridge Tower;Anno Layer:Anno Level:

BLDG1; 1011.5-2.2 mm; 2.0-3.5 mmAnno Size:

Note:Show bridge tower at deck level to scale as building line. Annotate as "Bridge Tower".

Seawall /

J5.3

Bridge Tower

v( )x •FY

-RM

LANTAU LINK » ft I* i-RM

-RM

y^ >{v'BP

Bridge Tower

Seawall M t§l

-RM

-FY

4

4

Seawall jf^

+6,3

mmBridge Tower

4 )/

LANTAU LINK

t ^mmBridge Tower

Seawall M&

,L

+67,8

iL

B7

BUILDING

General Guidelines:(a) All permanent buildings or structures of a size larger than 10m2 should be surveyed.

However, in rural area a smaller isolated building forming a prominent landmarkmay be surveyed and shown for identification purpose.

(b) For single tower building on podium, adopt the podium as building if its offset fromthe building is less than 3 m. Otherwise show both the podium and the building.

(c) Gap/passageGap/passage between buildings will be surveyed and shown to scale.

(d) Jut / RecessJut or recess under 1 metre is ignored and normally the longer portion of thebuilding is adopted. This rule should also be adopted to show the projected positionof the building corner.

(e) Partition Wall / Sub-division LineThe centre lines of partition walls defining different title or ownership are shown intenement and village type houses. Do not show partition lines where differenttenements are at ground floor only.Staircase(f)

(g)

(h)

(i)

0)

Concrete staircase attached to a building up to its full height is regarded as part ofthe building. Otherwise show as steps or elevated walkway.Ground Floor FeaturesIf the ground floor of a building is used for public transport facilities such as a busterminus, show major details and annotate the usage as "Bus Terminus under".Features not shownDetails within buildings such as mutual staircase arcade, subdivision lines of thesame building and the public access way, except a main carriageway are notsurveyed.Attributes & Annotation of BuildingBuilding names and house numbers are surveyed or supplied by the Rating &Valuation Department and stored in Lookup Tables. Building names and housenumbers recorded in field should be stored as default entries and other sources asalias. Buildings demolished or renamed should also be marked in the records of theLookup Table.Significant buildings or those within housing estate should be annotated.If there is no proper name for a public building, it should be annotated with theusage such as Garage, Factory, etc. provided that it is exclusively used for thatpurpose. If the building is for multi-purpose, annotate the building with its majorusage.Those permanent structures with different heights are regarded as part of the mainbuilding if they are attached to the building and bear the same building name.

Protruding end-wall < 1 m

Jut < 1 m \

Projectedposition ofbuildingcorner

Recess < 1 m

B8

Staircase

BLDGPOLYBP, BAP, BUP

1. Building OutlineFeature Layer:Feature Code:Note:(a) Survey along the outermost of the building outline.(b) Show light well of over 100 m2 inside a building.

In t e rna t ioa l Commercial Building

International Commercial BuildingOff rfs28 HE

Block 1 Biock 2

B9

2. Building Footprint (See also Overhanging Structure.)Feature Layer: BLDGPOLY / BLDGFeature Code: BP / CANote:(a) Show building footprint as "BP".(b) Show overhanging feature such as balcony over public area as "CA".

/ Riding Floor3. Overhanging Structure f ^^ J /Balcony ff^ /Canopy %^crSiltM /Verandah ^JgpFeature Layer: BLDGFeature Code: CANote:(a) Balcony, riding floor, verandah, as well as permanent canopy are considered as

overhanging structures.(b) Show overhanging structure of tenement blocks in pecked line and crossed diagonal

pecked lines as "CA".(c) Show building line at ground level in firm line as "BP".(d) For tower blocks, show only the outermost building line as "BP".(e) Do not survey balcony or canopy protruding less than 2 m from the building line.(f) Treat riding floor as part of the building line. Show major details under such as

"RMU", "PAU" etc.

BP

g

£"Oooo:

2o:

»B«| Permanent

^: BuildingCL :

j 20

Do not show OS 'diagonal crosses.

CA

jXBP

Top plan

CA

n/!\ 'I ii/ \ |

i

Riding Floor

•ooo

oc

1 11 1

PermanentBuilding

20

\\ fIX.

Balcony

un

1L=

L-

1=1 CZU

CZI CUD

cm czn

C=D CZ1

cm cm

cm

cm

cm

cm

cm cm

cm cm

cm cm

cm cm

cm cm

Canopy> 2m

=3

Side plan

BIO

BP

Top plan

Tower Type

cm cmcm cmcm cmi i i i

cm cm

cm cmcm cmcm cmcm cmcm cm

cm cmcm cmcm cmcm cmcm cm

Side plan

BP

Top plan

-!\ /X !

OverhangingStructure

cm cmcm cmcm cmcm cm

Side plan

cm cmcm cmcm cmcm cmcm cm]

Side plan

Verandah/

Bll

4. Podium ^p^n / Elevated PlatformFeature Layer: BLDGFeature Code: PD

Podium; ^TZJBLDG1; 1011.5 mm; 2.2 mm

or Podium ([usage] under); (T7Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Permanent building and road on elevated platform or podium are surveyed and

shown.(b) If public access to the podium or platform is not allowed, show the podium limit and

building tower only.(c) If there are other public usage under the podium, then annotate as such, e.g. Podium

(Car Park under), Podium (Bus Terminus under), etc.

Adopt podium asbuilding outline if •

offset < 3m.

Building outline haspriority over Podium line.

28

*P£Podium

;t m x mJava Bu i ld ing

PO

BP28

¥BPodium

Java Building

5. Wall in Tenement BlockFeature Layer: BDYFEATFeature Code: WHNote:(a) Show free standing wall in tenement block as "WH".(b) Wall in tenement block should not be shown as part of the building. Only "IBP" and

"PWP" can be used within "BP".

Building Outline

Wall in Tenement Block

BP WH

B12

6. Imaginary LineFeature Layer: BLDGPOLYFeature Code: IBPNote:Some buildings are attached to one another with no obvious partition lines in between. Inorder to distinguish individual buildings; add imaginary subdivision lines "IBP".

Add IBP line atapproximateposition if thebuilding is notdivided bydefinite featuresor if datais not available

BP

Block 1 Block 1

8CD

BLDGPOLY[Building Name]

1.1 -2.0 mm; 2.0 -2.8 mm

7. Building NameFeature Layer:Annotation:Anno Level:Anno Size:Note:(a) All building names must be in upper and lower cases, e.g. "Hong Kong Convention

and Exhibition Centre", "Passenger Terminal Hong Kong Airport", etc.(b) Try to fit the building name upright within the outline of the building. If the building

name is longer than the building outline, suppress the display of a portion of thebuilding outline.

BP

Sun Building

28

Sun Building

28

(c) Put only one character space between words of a building name.(d) If the full name does not fit inside the space, use abbreviated name if exists.(e) Input block number or name and site name in individual fields as building name in

the Lookup Table.

B13

(f) If there is another name that is different from the name observed in the field, enterthe name as alias in the Lookup Table but do not annotate.

(g) If the building is within a site and its name is in the form of a block number, add thesite name before the building name. On the other hand, if the building has a propername, there is no need to add the site name to the building name.

Example:

Location

Block 2, Euston Court

Yee Cheung Mansion,Lei King Wan

Entry in Site NameLookup Table

Euston Court

Lei King Wan

Entry in Building NameLookup Table

Euston Court Block 2

Yee Cheung Mansion

(h) If the building is within a sub-site, add the sub-site name before the building nameregardless of whether it has a proper name or not. (See also SITE / ESTATE.)

8. House NumberAnnotation: [House No.] or [House No. + Street Name]Anno Layer: BLDGPOLYAnno Level: 2 or 1; 101Anno Size: 1.3 mm or 1.3 - 2.5 mmNote:(a) House number is shown in different ways:

(1) At the main entrance of the building facing the road.(2) In the direction of the range numbers along the building side facing the road,

which the numbers referred to. The ranged house numbers should be annotatedto reflect the relative position of the buildings.

(3) At respective building if there is an open area in front of it. If space isinsufficient, show the house number perpendicular to the road.

(4) If one single number refers to several buildings within an enclosed area, thenumber should be placed at the main entrance of the area.

(5) If a house number(s) refer(s) to a building or several buildings within anenclosed area, but the entrance facing a road differs from the address; then thehouse number(s) together with the street name should be annotated in a waysimilar to annotating building name, that is, by putting them into the appropriateannotation sub-class of the BLDGPOLY layer. The annotation is placed withinthe building or group of buildings together with the street name.

(6) Show house number on temporary structure with identifiable limit. Do not showhouse number if they are grouped together.

(7) Keep legibility when entering house numbers.(b) Place the house number 1 mm from the building outline.(c) Add the address to the Lookup Table as well.

B14

GA

o

14B-14A

K-mBlock 1

n urnBlock 2

,4-12

10

•Q

-o8

FIRST STREET

UJUJcr

UJcc

1mm

nm^mFawityTowers

Podium

5-5,4

PO

BP

rSECOND STREET

14B-14A

m-m.Block 1

14-

m~mBlock 2

-12

" 4

10 8

FIRST STREET

UJcr00

uio:»—zUJo

FawityTowers

1-3

Podium 11~7

5-5A

mum SECOND STREET

B15

DO

Blmtita

o

Oo*

89A

KADOORIE AVENUE

M-

T>

o

mo

mi/>•H

PWP

41mm

•PWP

PWP

PWP

T

s

i

1

£ 2 2 2

BURIAL URN/URNS

General Guidelines:(a) Structure of smaller than 10 m2 for storing burial urns is surveyed and shown with

standard symbol. Annotation is not required. If it is larger than 10 m2, it is shown to scaleas building and annotated.

(b) Show group of urns if the area occupied is larger than 10 m2 in pecked line "PEC".Annotate them as "Burial Urns".

(c) Retain contour lines within group of urns.

1. STRUCTURE SMALLER THAN 10 m2

Feature Layer: MISCPTFeature Code: URS

2. GROUP OF URNS or STRUCTURE LARGER THAN 10 m2

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

MISCLINE / BLDGPOLYPEC / BPBurial Urns;MISCLINE / GENANNO1; 101/5; 1051.5 mm; 2.2 mm

©URS

BPnBurial Urns

( luMV"\ Buna! Urns/

n ft £9Burial Urns

\ Burial Urns /\ /

BUS TERMINUS B±H8$fi

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Bus terminus built exclusively for the usage is surveyed and annotated. Do not show

passenger shelters or station manager kiosks.(b) Show concrete strips over 1 m wide as "RM" separating bus bays.(c) Bus Terminus under podium is surveyed and shown in suppressed mode. Annotate as

"Bus Terminus under".

ROADRMBus Terminus;GENANNO5; 1051.5-2.2 mm; 2.0-3.3 mm

B17

Bus Terminus

RM

Bus Terminus

B18

CANOPY (See BUILDING.)

CAR PARK

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

BLDGPOLY/ROADBP/RMMulti-storey Car Park; ^JSf?^iBLDG / GENANNO1; 101/5; 1051.5 mm; 2.2 mm / 1.5 mm; 2.2 mm

/Car Park;

Note:(a) Survey permanent public car park inside building and at open ground with "Parking"

sign poles only. Annotate them as "Multi-storey Car Park" and "Car Park".(b) Ignore roadside parking spaces.(c) Annotate Car Park at open ground, which is defined by RM or other surrounding

features.

Car Park

Road

RM

-RM

• RM

BP

Multi-storey Car Park

Car Park

Road

Multi-storey Car Park

Cl

CARGO HANDLING ARE A (See also CONTAINER TERMINAL.)

[Proper Name] or Cargo Handling Area;GENANNO4; 104 (Named), 5; 105 (Unnamed)1.5-2.7 mm; 2.2-4.0 mm

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Survey and annotate limits of cargo handling area, which are defined by surrounding

features and its related buildings.(b) Do not survey individual plant and other materials in the open yard.

CATCHWATER 3 [/Kit (See also NULLAH.)

Feature Layer: RELIEFFeature Code: CW, SRAnnotation: Catchwater, $/7fcM (in italic)Anno Layer: RELIEFAnno Level:Anno Size:Note:(a) Do not survey catchwater less than 0.5 m wide.(b) Use "SR" for catchwater less than 1 m wide and "CW" for wide Catchwater.(c) Catchwater is a relief feature and therefore is lower in hierarchy than "RM" and "FBR"

except "FPW".(d) Add short lines "DA" as flow direction arrow at suitable intervals along the catchwater.

(See FLOW DIRECTION ARROW.)

1.5 mm; 2.2 mm

SR

C2

CEMENT WORKS 7JeM$£ (See also CARGO HANDLING AREA.)

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show limits of cement works as defined by surrounding features. Survey and

annotate its related buildings as appropriate.(b) Show only major details inside.

[Proper Name]GENANNO4; 1041.5 - 2.7 mm; 2.2 - 4.0 mm

CEMETERY

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

MISCPTCEM[Gazetted Name] or Graves; l£;tfeGENANNO3;103 (Major), 4; 104 (Minor), 5;105 (Unnamed Cemetery)1.5 - 2.7 mm; 2.2 - 5.0 mm

Note:(a) Cemetery without gazetted name should be treated as graves.(b) Place headstone symbol "CEM" according to spacing specification shown below. Show

the outline of cemetery in pecked line or as defined by surrounding features.(c) Show only permanent building, significant footpath and major access road with

appropriate line symbol. Show contour line and spot height to indicate the generaltopography of the area.

CHINESE CHRISTIAN CEMETERY

PEC

CHINESE CHRISTIAN CEMETERY

n

C3

CENOTAPH (See MONUMENT & DECLARED MONUMENT.)

CHIMNEY @

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Isolated chimney larger than 10m2 (or larger than 3.5 m in diameter) constituting a landmarkis surveyed and shown to scale.

MISCLINECHLChimney; ;M&MISCLINE1; 1011.5 mm; 2.2mm

mmChimney Chimney

CLIFF

Feature Layer: RELIEFFeature Code: CL (Top of Cliff),

BO (Internal Crevices)Note:(a) Show Top of Cliff by drawing a single line "CL". The line pattern 3-metre in width

appearing to the right of the line is generated automatically in plotting.(b) Avoid placing other features too close to the line and overlapping the line pattern. If that

happens, move "CL" slightly apart.(c) Depict Top of Cliff with a smooth line. Avoid sharp angles. Otherwise the pattern will

clump together.(d) For cliff with horizontal displacement greater than 8 m between top and bottom, show

internal crevices as "BO", 3 m from the line of "CL".(e) Show bottom of cliff in pecked line "PEC" if available.

C4

COLUMBARIUM IOSSUARIUM

BLDGPOLY / MISCLINEBP / FIR or as defined by surrounding feature[Gazetted Name] or Columbarium 'ff'J/cH or OssuariumBLDGPOLY / GENANNO1; 101 / 4; 104 (Named), 5; 105 (Unnamed)1.5-3.0 mm; 2.2-4.0 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Show building or outer limits of columbarium as defined by surrounding feature or both.

Columbarium Columbarium

CONDUIT (See PIPELINE.)

CONSTRUCTION IN PROGRESS (See WORKS IN PROGRESS.)

CONTAINER TERMINAL (See also CARGO HANDLING ARE A.)

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show limits of terminal as defined by surrounding features. The related buildings

are surveyed and annotated as appropriate.(b) Show only major details inside.

[Proper Name]GENANNO3; 103 ,4; 1041.5-3.0 mm; 2.4-4.0 mm

C5

CONTOUR LINE

Feature Layer:Feature Code:

Annotation:Anno Level:

CONTOURCIS (Index Contour line),CNS (Normal Contour line),CIU (Index Uncertain Contour line),CNU (Normal Uncertain Contour line)Number (Value of Contour)1 - Index Contour Value2 - Normal Contour Value1.3 mmAnno Size:

Note:(a) Draw contours in firm lines. Use broken lines (uncertain) in areas where the accuracy is

doubtful. This applies particularly to those contours supplied by Photogrammetry inheavily wooded area.

(b) The contour interval is 2 metres with each 10-metre line indexed and 20-metre lineannotated. Individual contour may also be annotated for clarity purpose. Place contourvalue 0.5 mm above the contour line where it will not overprint another contour line.

(c) Do not draw contour lines through any artificial feature, cultivated area, stream and areaannotated as "WIP" (Work in Progress).

(d) Do not show contour lines if an area has been developed or the density of details is toocrowded. Show spot heights where contours are absent.

(e) Do not break contours for text or symbol.(f) Contours undqr elevated structure should be suppressed, if available.

Try to place the index contour valuesin a row for easy reference.

Index Contour Value

Normal Contour Value

C6

CONVEYOR !

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Show only large or prominent conveyor.

MISCLINEPECConveyor;MISCLINE1; 1011.5 mm; 2.2 mm

C7

BP

PECPEC

PEC---

Conveyor

Conveyor

Factory

Show as single line if the conveyoris less than one metre wide andconsidered as prominent.

Conveyor

Conveyor

IIRFactory

COVERED WALKWAY /ARCADE

ROADCWYCW (Symbol)ROAD31.5 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show covered walkway or arcade at ground level and annotate as "CW".(b) Do not survey covered walkway on podium.

BP

CW

Block 2

CW

Block 2

C8

CULTIVATION ffjfe

BDYFEATCUCultivation;GENANNO5; 1051.3-1.8 mm; 2.0-3.0 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Cultivation areas already shown on the base map may be retained, although such areas

may now be abandoned or overgrown. No survey work will be done to verify anychanges. Only the approximate limit of large significant new cultivation area is surveyed.

(b) As a general rule, cultivation does not have contours running through them. Show spotheights if available.

(c) If a footpath coincides with cultivation bund, show footpath "FP" only.(d) Annotate cultivation for clarity only.

//CU

C9

CULVERT Bf^P / SAND TRAP

MISCLINEFIRCUL (Symbol)MISCLINE11.3-1.5 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show the fan walls of culvert shorter than 2 m with two firm lines 2 mm apart. If they are

longer than 2 m, show them to scale. Do not show underground box culvert.(b) Where a culvert coincides with another feature, display the other feature and annotate as

"CUL".(c) Omit sand trap. Show drainage "SR" only.

'cut CUL

CIO

DAM if or FIBRE DAM

Feature Layer:Feature Code:

ROAD / SLOPE / MISCLINEPA, RM etc. (Dam Top as defined by nature of feature) /SLOPE (Dam Wall) /PEC (Fibre Dam)Dam; H or Fibre Dam;GENANNO5; 1051.5 mm; 2.2 mm

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show dam to scale.(b) Show the dam wall as artificial slope.(c) Show fibre dam in pecked line "PEC" and annotate it.

TAI TAM RESERVOIR

Dl

DANGEROUS GOODS STORE

ft! (Symbol)GENANNO5

Annotation:Anno Layer:Anno Level:Note:Place symbol inside the boundary or site.

BP

D2

DECLARED MONUMENT

Annotation: * (Symbol)Anno Layer: GENANNOAnno Level: 5Note:(a) A declared monument may be a building, statue or monument, rock carving or a lamp

post.(b) Place the symbol on the declared monument.(c) Place the gazetted name in the appropriate feature layer within or next to the declared

monument. Suppress annotation if there is not enough space.

Tin Hau Temple

Building asDeclared Monument

Rock Carving asDeclared Monument

Monument / Statue as

MO (Overlap with DM symbol at the centre)

> L Lamp post as Declared MonumentPK «&

LP (Overlap with DM symbol at the centre)

Tin Hau Tempie

DESERTED FORT (See RUIN.)

D3

DOCKYARD

[Proper Name]GENANNO4; 1041.8 -3.Omm; 2.5 mm-4.Omm

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show limits of dockyard as defined by surrounding features. Survey and annotate the

related buildings as appropriate.(b) Show only major details inside.

DOLOSSE (See ARTIFICIAL SLOPE.)

DOLPHIN

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Show outline of dolphin by "SW".

RELIEFSWDolphin;RELIEF

1.5 mm; 2.2 mm

Dolphin

'sw[

FBR

Doiphi'n SB JIB £

SW

Dolphin

DolphinD

DRAIN p (See NULLAH.)

DUMPING ARE A (See WORKS IN PROGRESS.)

D4

ELECTRICITY POLE (See POWER LINE.)

ELECTRICITY PYLON (See POWER LINE PYLON.)

ELECTRICAL TRANSFORMER

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

UTILPT / BLDGPOLY / BDYFEATETP / BP / FET (Symbol) or [Proper Name]UTILPT / BLDGPOLY / GENANNO1/1; 101/5; 105 or 51.3 - 1.5mm; 1.5 -2.2mm

Note:(a) For Overhanging Electrical Transformer, show only electricity poles and annotate as

"ET".(b) Annotate the full proper name if there is enough space; otherwise use symbol.

BP

ET|

I———'-!T ET I

GA

Code - ETP

ET

ELECTRICITY SUBSTATION

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

/

BLDGPOLYBP[Proper Name] / ESS (Symbol)BLDGPOLY / GENANNO1; 101/51.5-1.8 mm; 2.2 - 2.7 mm

Note:(a) Show standalone electricity substation only.(b) Annotate the full proper name if there is space; otherwise use symbol "ESS" only.

BP

El

ELEVATED PLATFORM (See BUILDING.)

ELEVATED ROAD / FLYOVER (See also BRIDGE.)

ROAD / MISCLINEFY, FYU / PECElevated Road; iSJROAD3; 1031.5 mm; 2.2 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) The outermost margins of elevated road are surveyed and shown as "FY".(b) Use pecked line "PEC" to indicate the start and end of the elevated road.(c) Show major details under elevated road with respective feature codes such as "RMU",

"BUP", "PAU", "FYU" and "FBU" etc., and/or in suppressed mode if appropriate.(d) Survey and show other features under such as fence, trained riverbank in suppressed

mode for clarity.(e) Show utility points, spot heights, and contours under elevated structure in suppressed

mode.

Where on elevated roadunder another elevated structure,show It as FYU.

J™ I i If ^ " , \ •

ft « M * '3 >4led ' Mk'wSj Yi>a«rJ '.<?.!* ff'X.* I - \ -Elevated Road .c • ; • • ? • • y^y . . » • • - . . . . . . . _ _ _ _ _ BUR

*

FBU

E2

ELEVATED WALKWAY (See FOOTBRIDGE.)

ENCLOSED AREA (See also SITE.)

General Guidelines:An enclosed area may be privately owned or belong to the government. Enclosed areas can beclassified into three types - areas open to public in general, areas open to public with limitedaccess, and private property. Examples are as follows:

(a) For private area with or without physical boundary but is open to the public such asTaikoo Shing (yfcc!^) and Luk Yeung Sun Chuen ONMili'r1^), treat it as public area.Ground features are to be shown as in public area.

(b) For private area with physical boundary but may be accessed by seeking permission suchas Pare Oasis (3£—'M), show features of public interest - buildings, roads, and firehydrants but ignore minor features such as lamp-posts. Do not show features such asplayground, steps and paved areas that are not considered as major access.

(c) For private premises used solely by the occupant and the public is denied of access suchas Edinburgh Villa (|±fi) in Ting Kau, show artificial features forming the premisesboundaries - fence, wall, gate etc. Major features such as artificial slopes, main accessroads and buildings should also be shown.

E3

ESCALATOR (See also STEPS.)

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Generally, treat escalators as steps.(b) Only prominent escalators such as those in Ocean Park should be annotated.(c) Do not show landing between escalators or steps.

ROADPA, STPEscalator;ROAD3; 1031.5 mm; 2.2 mm

Escalator !£$*

PA STP

ESTATE (See SITE.)

EXPRESSWAY (See ROAD.)

E4

FENCE ffi§

Feature Layer: BDYFEATFeature Code: FNote:(a) Ignore fence constructed of flimsy materials or appeared to be temporary.(b) If bamboo trees form an apparent boundary, its centre-line is treated as a fence.(c) If a fence and another feature are within 0.5 m apart, display the dominant feature only

and suppress the other.

If F and VC are less than 0,5m apart, Fshow the one which is dominant and _»_,suppress the other feature . VC

iT

> 0.5m

FIBRE DAM (See DAM.)

FILTER BED

Feature Layer: MISCLINEFeature Code: FIRAnnotation: Filter Bed;Anno Layer: MISCLINEAnno Level:Anno Size:Note:Survey the outer limits of the filter bed only.

1.5 mm; 2.2mm

Filter Bed Filter Bed iI?K>t!2

Fl

FIRE HYDRANT

Feature Layer:Feature Code:

UTILPTFH (fresh-water fire hydrant),SFH (salt-water fire hydrant)H (Symbol)UTILPT11.3-1.5 mm

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Fresh-water fire hydrant is painted in red.(b) Salt-water fire hydrant is painted in yellow.(c) Record the number on fire hydrant in the Attribute Table.

The annotation can be placed at 7 8 11 of the 8 standard positions 6 - 1 - 2around the label point. 5 4 3

FIRING RANGE

Feature Layer:Feature Code:Annotation:

/ RIFLE RANGE

MISCLINEFRBFiring Range Boundary; ile / [Proper Name], Firing Range;

Anno Layer: MISCLINE / GENANNOAnno Level: 1; 101 / 4; 104 (Named), 5; 105 (Unnamed)Anno Size: 1.5 - 2.2 mm; 2.2 - 3.3 mmNote:(a) All firing range should be shown and annotated even though the firing range boundary

may or may not be found on ground.(b) If there is a physical feature such as a fence or wall, suppress the boundary line and

annotate the boundary name along the feature along the boundary line.(c) If the area has a proper name, annotate it within the boundary as a place name.(d) Do not show marker symbol or number.

F2

»*.

SAN WAI / TAI UNG FRNG RANGE

IIf FRB overlaps with an existing feature,show the feature and suppress the FRB.

\r SAN WAI / TAI LING FIRING RANGE

FLAGSTAFF (See MAST.)

FLAT ROCK (See ROCK.)

F3

FLOATING JETTY (See also JETTY.)

MISCLINEPECFloating Jetty; ^$MISCLINE

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show floating jetty or jetty built with flimsy material in pecked line.(b) Do not show any feature on floating jetty.

1.5 mm; 2.2mm

SSESBFloating Jetties sw

isr

sw

PEC

Floating Jetties

m

FLOATING RESTAURANT

MISCLINEPECFloating Restaurant;MISCLINE

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Do not show floating restaurant unless it is connected to the shore by permanent

footbridge.(b) Treat floating restaurant that is fixed with piles or foundations as permanent building.

1.5 mm; 2.2 mm

F4

FLOW DIRECTION ARROW

Feature Layer: RELIEFFeature Code: DANote:(a) Show the direction of flow of river/outfall/catchwater/nullah by a line "DA" of 3 - 6 mm

along the centre-line of the feature at suitable intervals.(b) Place the arrowhead in the same direction as the water ftows.

RV-

RV-

DA-

FLYOVER iSfSSIK' (See ELEVATED ROAD.)

FOOTBALL FIELD (See BASKETBALL COURT.)

F5

FOOTBRIDGE frAHf / ELEVATED WALKWAY

ROADFBR, FBUFB (Symbol) or EW (Symbol)ROAD31.5 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show footbridge over water and elevated walkway over road as "FBR". Do not show

overhead shelter or cover.(b) Annotate "FB" for bridge over water, and "EW" for elevated walkway over ground.(c) If the footbridge is over 1 m wide, show it to scale. Otherwise show it with a minimum

width of 1 m.(d) Show footbridge or elevated walkway under other features as "FBU" and annotate it in

full. (See also ELEVATED ROAD.)

F6

Bicycle Track

TOLO HIGHWAY

Bicycle Track

Bicycle Track^ £ \

•n$

ttl

•n

I

i

i i iS

12

1"

• i \\3 w8 3

t»

1

>

TJ

HI

CD

R»

Rl

IU

TJ

IU

IU

-n3

»TOLO HIG

Bicycle

FOOTPATH /JvK I BOARD WALK (See also TRAIL.)

Feature Layer: ROADFeature Code: FP, FPW, PAAnnotation: FP (Symbol)Anno Layer: ROADAnno Level: 3Anno Size: 1.5mmNote:(a) All significant footpaths in open areas must be surveyed. If a major footpath passes

through a cultivated area, the footpath symbol becomes dominant.(b) Show unpaved footpath of less than 1.5 m wide in single pecked line with feature code

"FP"(c) Show unpaved footpath with width greater than 1.5 m in double lines with feature code

"FPW".(d) Show paved footpath in double firm lines with feature code "PA".(e) Show paved footpath less than 1 m wide to a minimum width of 1 m; others are shown to

scale.

VC ^rrnTTTTTr

FPW

^ FPW

F P ,

/(I

-4

F8

FOUNTAIN If

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Survey limits of fountain in public area larger than 10m2

RELIEFPOF (Symbol in italic)RELIEF11.5 mm

FREE STANDING WALL Jfg (See WALL.)

FUEL TANK ft& (See TANK.)

F9

GAS FILLING STATION (See PETROL FILLING STATION.)

GAS TANK (See TANK.)

GATE iU

Feature Layer: BDYFEATFeature Code: GANote:(a) Show gate less than 1 m wide as 1 metre.(b) If there are two or more gates joined together, show individual gate symbol.

GA WL GA GA

WL

4-6

PWP

4-6

GOLFCOURSE

Annotation: [Proper Name] or Golf Course;Anno Layer: GENANNOAnno Level: 3; 103 (Major), 4; 104 (Minor) - Named Golf Course

5; 105 - Unnamed Golf CourseAnno Size: 1.8 - 3.3 mm; 2.5 - 5.0 mmNote:(a) Annotate named golf course with its proper name. For unnamed golf course, annotate as

"Golf Course".(b) Do not show fairways, greens, tees, bunkers and small water traps.(c) Show limits of golf course as defined by surrounding features. Survey and annotate the

related buildings as appropriate.

Gl

GRAVE / GRAVES ^fcfe (See also CEMETERY.)

1. ISOLATED GRAVEFeature Layer: MISCPT / MISCLINEFeature Code: GVS / FIRAnnotation: G (Symbol)Anno Layer: MISCLINEAnno Level: 1Anno Size: 1.5mmNote:Isolated graves are surveyed. Show isolated grave smaller than 60 m2 by symbol,"GVS". Others are shown to scale and annotate with "G".

(G) GVS

2. GROUP OF GRAVESFeature Layer} MISCLINEFeature Code: PECAnnotation: Graves; 11%Anno Layer: MISCLINEAnno Level: 1; 101Anno Size: 1.5 mm; 2.2 mmNote:Show groups of graves less than 15 m apart in pecked line along the outer limit andannotate as "Graves". Contours are drawn through such area.

G2

GROUND FLOOR ANNOTATION (Usage of Public Facilities)

1.5 mm; 2.2 mm

[Usage] under;BLDG

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Annotate public facilities, such as LRT terminus, car park, bus terminus, market and

petrol station that are under building or podium in brackets, e.g. (Bus Terminus under),(Market under) etc.

(b) Show major details under. Use suppressed mode for clarity.

rRMU N

•a •'\ (Bus Terminus under) j

Suppress the display of RMUtinder annotation

< i AaJT P 59:-P to Z5_o\ (Bus Terminus under)

G3

HELICOPTER LANDING PAD

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show the limit of concrete area of public and open field helicopter landing pad in firm

line or by surrounding features.(b) Show the limit of helicopter landing pad within a large paved area in pecked line.(c) Provide spot heights.

ROAD / MISCLINEPA/PECHL (Symbol)GENANNO51.5 mm

HIGH WATER MARK (See also NULLAH.)

RELIEFHWHWM (Symbol)RELIEF11.5 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Delineate the coastline with High Water Mark

Principal Datum.(b) Do not show the High Water Mark where it passes around reclamation area, rock, vertical

wall, seawall, pier, slipway, building and temporary structure.(c) Show the High Water Mark up to the estuary or at the point where the coastline joins a

nullah even if the connecting river or nullah is a tidal river.(d) Do not show details below the High Water Mark.(e) Annotate the High Water Mark at the seaward side.

;'HWM", which is 2.3 m above the

HI

HWM

O 5J;

HWM

HIGHWAY (See ROAD.)

HYDROGRAPHIC NAME (See also PLACE NAME.)

[Hydrographic Name] (in italic)GENANNO1; 101 (Major), 2; 102 (Minor)1.3-5.0 mm; 2.0-7.0 mm

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Annotate the proper name only. General descriptions such as sea, harbour and channel

are not required except for "Nullah".(b) Place the romanized name in brackets underneath the English name, e.g. DEEP BAY

(SHENZHEN WAN) and DOUBLE HAVEN (YAN CHAUTONG).

EHDOUBLE HA VEN

(YAN CHAU TONG)

Ef]

DOUBLE HAVEN

(YAN CHAU TONG)

m

INCINERATOR

BLDGPOLY / MISCLINEBP/FIRINC (Symbol)GENANNO / MISCLINE5 / 11.3-1.8 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show incinerator constructed of permanent material in public area to scale. Show those

smaller than 1m2 to 1m2.(b) If the incinerator is a small building, show the building outline "BP" and annotate it as

"INC".

FIRa INC a INC

INTERCHANGE (See also ROAD & PLACE NAME.)

General Guidelines:If an interchange is gazetted as road, enter the annotation at the "ROAD" Layer. Otherwisetreat it as a place name and enter the annotation at "GENANNO" Layer.

II

JETTY /PIER / WHARF (See also FLOATING JETTY.)

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:

RELIEFSWJetty; $tgjf or Pier; $fgjf or Wharf; figglGENANNO3; 103 (Major), 4; 104 (Minor) - Named Jetty5; 105-Unnamed Jetty1.3-4 mm, 1.8 mm - 5 mmAnno Size:

Note:(a) Show the limits of structure built with permanent materials in firm line as "SW".(b) Do not show details on jetty, pier, and wharf except for building, navigation beacon or

light.(c) For vehicular ferry pier, do not show machinery pontoons or other means for loading

vehicles.(d) Show permanent steps attached to or forming part of a jetty, pier, and wharf.

SW

sw?T P I^TTmHW j

PAPier 2

STP

s Nn'rpf^

BEA

I T {• I -SKWS3BO I RpLU • Pier 3 |BP

Hi* L_§8 IJetty . , Jetty ,

JUT (See BUILDING.)

Jl

KOWLOON CANTON RAILWAY A^$& (See RAILWAY.)

Kl

LAMPPOST Mft

Feature Layer: UTILPTFeature Code: LPAnnotation: L (Symbol)Anno Layer: UTILPTAnno Level: 1Anno Size: 1.3-1.5 mmNote:(a) Show lamp post and annotate it by symbol and record its number in the Attribute Table.(b) Lamp post within enclosed area should not be shown except in area that is open to the

public.

The annotation can be placed at 7 8 11 of the 8 standard positions 6 + 2around the label point. 5 4 3

LANE 3| (See ROAD.)

LATRINE Ijfftf (See TOILET.)

LIGHT (See BEACON.)

LIGHT RAIL TRANSIT (See RAILWAY.)

LIGHT WELL (See BUILDING.)

LINE OF RECLAMATION (See WORKS IN PROGRESS.)

LPG FILLING STATION (See PETROL FILLING STATION )

LI

MANGROVE j

Feature Layer: MISCPT / MISCLINEFeature Code: MN/PECNote:(a) Define the approximate boundary of mangrove in pecked line "PEC" and place point

symbols "MN" randomly at approximately 1.5 cm apart.(b) Survey and show the approximate area of mangrove beneath the High Water Mark by

standard symbol.

PEC

MARSH / SWAMP S

Feature Layer: MISCPT / MISCLINEFeature Code: MA / PECNote:(a) Show the approximate boundary in pecked line "PEC".(b) Place point symbols "MA" randomly at approximately 1 cm apart.

Ml

PEC

-Jfer

MA

* * \•&• 4r

% -4,

* -4-

* %

\ jl . 4"tv "^^ "**

MAST ff /FLAGSTAFF Jgff /SIGNALMAST

Feature Layer: MISCPTFeature Code: DOTAnnotation: Mast; ^fAnno Layer: MISCPTAnno Level:Anno Size:Note:(a) Survey isolated and significant flagstaff, mast or signal mast and annotate it as "Mast".(b) Annotate a group of masts or flatstaffs as "Masts"

1.5 mm; 2.2 mm

Molts ODOT

o DOT

DOT*GA

•L Mast

\J

Masts

Mast

MENAGERIE (See AVIARY.)

M2

MOAT

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Treat moat as pond and annotate it.

RELIEFPOMoat; J|tRELIEF1; 1011.5 mm; 2.2 mm

(in italic)

M3

MONUMENT/ STATUE

I SCULPTURE / CENOTAPH / OBELISK

MISCPT / BLDGPOLY / ROADMO/BP/PAM (Symbol) or [Proper Name]MISCPT / BLDGPOLY1/1 ; 1011.5 mm / 1 . 5 mm; 2.2 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show monument smaller than 50 m2 in point symbol "MO". Otherwise show as building

with a point symbol "MO" at the centre.(b) Show the platform of monument in firm line "PA".(c) Annotate monument with its proper name or "M" as appropriate.

MO

• M)__JPA

MO—+9T JBPTian Tan Buddha Statue

MTR ACCESS

Feature Layer: MISCPTFeature Code: MTENote:Show all MTR accesses, except those inside commercial buildings in point symbol "MTE".

MTE (Place the symbol near the entrance.)

I-

CHATER ROAD

•RM

BP

CHATER ROAD

M4

NOISE BARRIER

Feature Layer: MISCLINEFeature Code: NB / PECNote:(a) Show the wall type or canopy type of noise barrier as "NB" in single line.(b) Show the barrier side of the verandah type of noise barrier by "NB", while the other three

sides by "PEC" and the cover by a pair of crossed diagonal pecked lines "PEC".(c) Show the sides of the tunnel type of noise barrier by "NB", while the end limits in

pecked lines "PEC". Show the tunnel by a pair of crossed diagonal pecked lines "PEC".(d) Show major features such as railways, road margins and utility points inside the noise

barrier tunnel in suppressed mode.

Verandah type. i Wall/Canopy type

NB 4

RM

Road

Show the open side of the shelter with PEC.

KCR

Suppress Railway inside the structure.

NB

o-lKCR I Kowloon-Canton Railway East Rail

Tunnel type

Road

Kowloon-Canton Railway East Rail

Nl

NULLAH ^ /DRAIN p (See also FLOW DIRECTION ARROW.)

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a)

RELIEFSR, RV, DANullah\ Jf (in italic)RELIEF

1.5 mm; 2.2 mm

If the watercourse is 0.5 m to 1.5 m wide, input it in single line from upstream todownstream as "SR".

(b) If the width of the watercourse is greater than 1.5 m, survey and show it to scale as "RV"and indicate the direction of flow with arrows. (See also FLOW DIRECTIONARROW.)

(c) For inland-trained river/nullah, show the outer limits. Details are not surveyed except forramp. Show sewer and storm water outfall with arrows to indicate the direction as "DA"and annotate as "Outfall".

(d) The sidewall of nullah is treated as an artificial slope. Show the top of sloping masonryas "PA" and the bottom as "RV". Show the symbolized area of sloping masonry/concreteembankment as slope symbol. If the horizontal displacement of individual sidewall isless than 1.5 m, show top of slope as "RV".

(e) For river/nullah directly leading to sea, show the riverbank/embankment as "RV" up tothe sea or joining the seawall changing to High Water Mark. If the turning point is notdefinite then change at an appropriate position.

Watershed

Two arcs of opposite directions

Hie 1st flow arrow is at 7.5mmfrom the storting point of thearc and others at every 100mmalong the arc after the firstone.

Bicycle Track* jf£ ff

Nullah -DA

RV TOLO HARBOUR

N2

Bicycle Trctck

jt&pOutfol

urnrnTOLO HARBOUR

1 i l l t i l 1

N3

OBELISK (See MONUMENT.)

OPEN AREA

General Guidelines:An open area refers to Country Park, Catchment Area, etc. Those within an estate, sportsground, etc. are not regarded as open areas.

OPEN-SIDED STRUCTURE

BLDG / BLDGPOLYOS / OSP[See BUILDING.]

Feature Layer:Feature Code:Annotation:Note:(a) Show limits of open-sided structure larger than 25 m2.(b) Show the open-sided structure with feature code "OSP" in BLDGPOLY layer if it has a

proper name or address. Otherwise, show it with feature code "OS" in BLDG layer.(c) Show crossed diagonal pecked lines by "OS".

OS / <?81- \

/A.

\ XsA \osos\ > \

OSP I

vc VC + OSP

BP

VC

Do NOT use OSP as diagonal lines.

\

3-5

», ,*X

OSSUARIUM (See COLUMBARIUM.)

Ol

OUTFALL (See also NULLAH.)

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Show flow direction arrow. (See FLOW DIRECTION ARROW.)

RELIEFDAOutfall;RELIEF1; 1011.5 mm; 2.2 mm

PA

j_IJj?LLL-..-. 1 HW Q^ HWM

s^£D

_Ll_mHWM

II

OVERHANGING STRUCTURE (See BUILDING.)

O2

PAGODA Jgp

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Survey and show pagoda to scale and annotate it.

BLDGPOLYBPPagoda; $=£ / [Proper Name]BLDG / BLDGPOLY1; 101/1; 1011.5 mm; 2.2 mm

PARK £:M / PLAYGROUND / PLEASURE GARDENGARDEN flcJU^HS / SITTING-OUT ARE A f^jfjE

/ REST

Annotation: [Proper Name] or [Usage as appropriate]Anno Layer: GENANNOAnno Level: 3; 1Q3 (Major), 4; 104 (Minor) - Named Park

5; 105-Unnamed ParkAnno Size: 1.5-3.0 mm; 2.0-4.5 mm, 1,3- 1.8mm; 1.8-2.5 mmNote:(a) Show only main access road in continuous firm lines as "PA".(b) Show limit of aviary or menagerie in pecked lines. No minor details will be surveyed.(c) Show limits of park as defined by surrounding features and refer other details in their

respective layer.(d) Annotate usage only if space is limited.

J L

! p |pvr j Sitt ing-out Area

GApi I-CXM 1 1-

WL

F GA-i-exj-i

Java Road Park

GA

1 ! 11ttffidt u

Sitting-out Area

M1

jI^Sfi^HJava Road Park

PI

PARTITION WALL (See BUILDING.)

PAVED AREA / PAVEMENT

Feature Layer: ROADFeature Code: PA, PAUNote:(a) If a paved area is not surrounded by other details, its limit is surveyed and shown as

"PA".(b) Ignore insignificant planting strip or flowerbed within pavement. Show pavement under a

structure in pecked line "PAU".(c) For paved area surrounding isolated small houses, ignore those that are less than 3 metres

wide.

P2

PAVILION I|C

Feature Layer: BLDGFeature Code: PVAnnotation: P (Symbol)Anno Layer: BLDGAnno Level: 1Anno Size: 1.5mmNote:Survey and show pavilion larger than 10 m2 as permanent structure with code "PV".

I P I P VI J

PEAK TRAMWAY (See RAILWAY.)

PETROL FILLING STATION rft)5£ and/or LPG FILLING STATION

Petrol Station; rfi^ and/or LPG Filling Station;GENANNO5; 1051.5 mm; 2.2mm

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show only building, open-sided structure, and the surrounding features such as fence or

wall forming the limit of the station.(b) If the petrol filling station has a house number, annotate it in BLDGPOLY layer. (See

also BUILDING.)

P3

PICNIC SITE (See BARBECUE AREA.)

PIER (See JETTY.)

PIPELINE /CONDUIT

MISCLINEFIRPipeline; ^MJSCLINE1; 1011.5mm; 2.2mm

mFeature Layer:Feature Code:Annotation: Pipeline; or Conduit;Anno Layer:Anno Level:Anno Size:Note:(a) Show pipeline or conduit of 0.1 m to 1 m in width, on land or over water, in single line.(b) Show pipeline or conduit greater than 1 m in width to scale in double firm lines.(c) For pipelines in a group, show the outer limits and annotate as "Pipelines". Do not show

supporting the block or dolphin.

F1R-Pipeline Pipeline

P4

PLACE NAME Jr-fe^g / TOPOGRAPHIC NAME

General Guidelines:(a) Do not show names of Region, District, Village Area (Heung) and large island (such as

Lantau Island, Hong Kong Island, etc.)(b) Show all the names that appeared in the Geographical Place Name Book (published by

Technical Information Section of Survey and Mapping Office) other than (a) above.(c) Show newly gazetted or approved names other than (a) above.(d) Seek the approval of the Geographical Place Name Board for new place names such as

re-site village, new settlement area, etc. before adoption.(e) As the extent of a place may not be clearly defined so do not form site polygon. Annotate

the place name at an appropriate position with suitable character size and orientedhorizontally within the area.

(f) Input major topographic names, such as bay, harbour, hill, island and valley in "Level 1",otherwise in "Level 2". Input major place names, such as area and village in "Level 3",otherwise in "Level 4".

(g) If a feature has both English and romanised Chinese names, place the English one firstwith the romanised name in brackets underneath, e.g. KOWLOON PEAK (FEI NGOSHAN).

(h) All letters of place name except for those in Anno Level 4 should be in upper case.

Feature:Anno Layer:

1. Annotation:

Anno Level:Anno Size:

2. Annotation:

Anno Level:Anno Size:

3. Annotation:

Anno Level:Anno Size:

4. Annotation:

Anno Level:Anno Size:

Names of bay, channel, harbour, hill, pass, reservoir, etc.GENANNO

[Major Topographic Names]e.g. CASTLE PEAK BAY; WU-iH, MA WAN CHANNEL;LION ROCK; $f-?[i|, TAI MO SHAN; ^vflULf,SHEKPIK RESERVOIR; 5^Rij§1; 1012.2 -5.0 mm; 3.0 -8.0 mm

[Minor Topographic Names]e.g. SHAM WAT WAN; ^JSW,CAUSEWAY BAY TYPHOON SHELTER;PIPER'S HILL; ggUj, TAITAM GAP; iPILLAR POINT (MONO HAU SHEK); gl2; 1021.3 - 4.0 mm; 2.0 - 6.4 mm

[Major Place Names]e.g. NAM SANG WAI; jf3/1032.2-5.0 mm/5.0-7.0 mm

I FAN LAU; frffi, PING SHAN;

[Minor Place Names]Chuen Lung Chun Ha; J f ftPJffT, Wo Hang Tai Long;4/1041.3-4.0 mm/2.0-6.4 mm

P5

PLAYGROUND 2 (See PARK.)

PLEASURE GARDEN (See PARK.)

PODIUM (See BUILDING.)

POND m i POOL %

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Show all pond and pool larger than 100 m2 or those considered prominent.

RELIEFPOPond; jff or Pool; %1 (in italic)RELIEF1; 1011.5mm; 2.2mm

P6

POWER LINE I ELECTRICITY POLE (See also PYLON.)

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show electricity poles and annotate by symbol "E" except those in enclosed area.(b) Show only high tension overhead power lines, etc. connected to electricity poles in firm

line as "PWL".(c) Actual connection to twin "ET" poles should be shown.

UTILPT / MISCLINEEP/PWLE (Symbol)UTILPT11.3-1.5 mm

The annotation can be placed at1 of the 8 standard positionsaround the label point.

ETP

PWL

7 8 16 + 25 4 3

Show the actual connectionof the power line to twin ET poles

ET

ET ET

POWER LINE PYLON / ELECTRICITY PYLON / PYLON

Feature Layer:Feature Code:

Note:(a)(b)(c)(d)(e)

MISCLINEFIR (Aerial Ropeway),PEC (Tower Arms),PWL (Power Lines),PY (Pylon Outline and Diagonals)

Survey and show foot of the pylon tower.Show only the outer limit of power lines, etc. connecting the pylon.Show supporting arms to tower in "PEC".Isolated pylon and pylon connected with power lines are surveyed.Show contours and major details inside the pylon area.

P7

supportingorm"

PWL~

PWL-

:-3\y v***.

POWER STATION

[Proper Name]GENANNO3; 103 (Major), 4; 104 (Minor)1.5- 3.0 mm; 2.2 mm - 5.0 mm

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show limits of station as defined by surrounding features.(b) Show only major details.

PROPOSED INFRASTRUCTURE

General Guidelines:(a) Show proposed infrastructure on the following areas only:

(1) Works in Progress site.(2) Vacant area.(3) Reclamation area.(4) Contoured area.

(b) Alignment matching between proposed and existing features is not required.

1. Proposed BuildingFeature Layer: PBLDGPOLYFeature Code: BPAnnotation: [Proper name], [House No.]Anno Layer: PBLDGPOLYAnno Level: 1; 101,2Anno Size: 1.5 mm; 2.5 mm, 1.3 mmNote:If a proposed building partly overlaps an existing artificial feature, suppress the wholebuilding.

P8

2. Proposed Road & Railway (See also RAILWAY.)Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

PROPROADRM, FY, TUR, MTR, KCR, LRT, PT, TW[Proper Name] or Proposed Road ^^MJPROPROAD1; 101,2; 102, 3; 1031.8 mm; 2.5 mm or 1.8 mm; 2.5 mm

Note:(a) Do not show proper name of the proposed road if the ST_CODE is not available.(b) Annotate route name in full.

3. Proposed Miscellaneous Line FeaturesPROPINFRASW, RV, PDProposed Seawall;PROPINFRA

Proposed Channel

1.5 mm; 2.2 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) For line feature, show proposed seawall and channel only.(b) Do not annotate proposed podium.

4. Proposed Site (See also SITE.)Feature Layer: PROPSITEFeature Code: NilAnnotation: [Proper Name] of site or projectAnno Layer: GENANNOAnno Level: 4; 104Anno Size: 3.0 mm; 4.0 mmNote:(a) The site limit may either be the project limit (if the whole area is vacant with no

artificial feature) or the "WIP" site limit.(b) Annotate the site with the estate or project name if available. Add the word

"Proposed" as appropriate, e.g. "Proposed Disneyland".

P9

HW-

RV-Proposed Channel

Proposed Channel

WIP Dtc 2001

BP m-//

JUNK BAY(TSEUNG KWAN 0)

:'////:' //-''

P10

V J- ' //i/£K,7/I ' I

> /•'.*«$.*"•' / ••,-•"' / '/Ml •' ' /

Proposed Channel MM MM

Proposed Channel M»«

JUNK BAYKWAN 0)

Pil

PUMP HOUSE

Feature Layer: BLDGPOLYFeature Code: BPAnnotation: PH (Symbol)Anno Layer: BLDGAnno Level: 1Anno Size: 1.5mmNote:Show pump house built of fiberglass as "BP".

BP

PH

PUMPING STATION

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show limits of station as defined by surrounding features.(b) Show only buildings and major details inside.

[Proper Name]GENANNO4; 1041.5-3.0 mm; 2.0-3.5 mm

PYLON (See POWER LINE PYLON.)

P12

QUARRY

Feature Layer:Feature Code:Annotation:Anno Level:Anno Size:Note:(a) Depict the top of cutting as "CL" and the quarry site limit as defined by surrounding

features. Otherwise show as "QB" in pecked line.(b) Treat abandoned quarry as cliff or slope as appropriate.

RELIEFCL (Top of Cutting), QB (Limit of Quarry)[Quarry Name with Date]4; 1042.0 - 2.5 mm; 2.2 - 3.3 mm

CL

QuarryDec 2001

OB

QuarryDec 2001

Ql

RACECOURSE

Annotation: [Proper Name] and/or Racetrack; H£§Anno Layer: GENANNOAnno Level: 3; 103 (Major), 4; 104 (Minor)

5; 105 (Racetrack)Anno Size: 2.0 - 33mm; 2.5 - 5.0 mm, 1.5 mm; 2.2 mmNote:(a) Show limits of racecourse as defined by surrounding features.(b) Annotate the racecourse with its proper name.(c) Show the racetrack in pecked line "PEC".(d) Show totalizator building and annotate in BLDG Layer.(e) Show other features as per specification for Sports Ground/Stadium.(f) Do not show railing along racetrack.

PEC

Hong Kortg Racecourse Hong Kong Racecourse

RACETRACK (See RACECOURSE.)

RAILWAY

General Guidelines:(a) Only railway lines of exposed routes are surveyed and annotated. Those under elevated

structure should be suppressed if available. Buildings and platforms within the area willbe mapped and annotated.

(b) Ignore open-sided shelter on platform and other minor details such as traffic light,electric poles, and overhead power line.

(c) Show buffer-stops as "FIR" in firm line but do not annotate.

Rl

1. RAILWAYFeature Layer: RAILFeature Code: MTR, KCR, LRT, PT, TW

(&B8O Mass Transit Railway (Island Line)

Kowloon-Canton Railway East Rail, KCR

KCR

rrt=rt=t=Light Rail Transit

4 ,__ LRTLRT

Peak Tramway

It IB ES Tramway-H H H H-

PT

TWTW

(/JSISI) Moss Transit Railway (Island Line)

TlfltlllSS Kowtoon-Conton Railway East Roil

Light Roil Transit

Tramway

Annotation: P7!!!! name of Railway]Anno Layer: RAILAnno Level: 1; 101Anno Size: 1.5 mm; 2.2 mmNote:(a) Annotate in full along the railway lines as follows:

(1) Kowloon-Canton Railway East Rail; AJllJ^li(2) Kowloon-Canton Railway West Rail; AStH(3) Mass Transit Railway (Kwun long Line); ife(4) Mass Transit Railway (Tsuen Wan Line); ife(5) Mass Transit Railway (Island Line); ^McM(6) Mass Transit Railway (Tung Chung Line); Jfe(1) Mass Transit Railway (Airport Express); | J

R2

(b) Annotate other railway system in full by their system name such as Light RailTransit, Tramway and Peak Tramway.

2. STATIONAnnotation: [Proper Name]Anno Layer: RAILAnno Level: 1; 101Anno Size: 1.5 mm; 2.2 mmNote:(a) Annotate only the proper name of KCR, LRT and Peak Tram Stations e.g. Tai Wai

Station, Kwun Tong Station, Hung Shui Kiu LRT Stop, May Road Peak TramStation.

(b) Annotations for underground MTR stations should be suppressed.

3. PLATFORMFeature Layer: BLDGFeature Code: PDAnnotation: Platform; R-feAnno Layer: BLDGAnno Level: 1; 101Anno Size: 1.5 mm; 2.2 mmNote:Shown station platform as podium.

PO

B

nmmm

PO /

(Suppressed)

Tai Wo Station

PU

' 'Gd

(f 'Rl

BP

PD . , ,

m Platform^ ^**• pn

Kowloon-Canton Railway East Rail ^^

rv 1 wa Platform^ -fe

1 , , «-

* « »» * /ll

(T^te±iK^Jl

)

Tai Wo Shopping Centre(Bus Terminus under)

BP

R3

Jimmm

Tai Wo Station

UJ

Platform £§ a

Kowloon-Canton Railway East Rail

Platform £3 c3

^ 0 iH %$ $* Jll)

Tai Wo Shopping Centre(Bus Terminus under)

ROADPA,FBRRamp;ROAD3; 1031.5 mm; 2.0 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show ramps that are wider than 2 m and longer than 3 m. No annotation is required

except for clarity.(b) Show ramp leading to footbridge or elevated walkway as "FBR".

RV FP

pA Ramp §41

A/£y//o^? If

Nt IPA

-v-DA

RV

RV

Romp

Nullah

R4

Ramp

-PA

- PA

FP

Romp

FP

RECESS [HIASBffr (See JUT.)

REFUSE COLLECTION POINT / REFUSE COLLECTION STATION

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

BLDGPOLY / BLDG / BDYFEATBP,TSP/TS,OS/F,WL[Proper Name] or RCP (Symbol)BLDGPOLY / BLDG / GENANNO1; 10171/5 ; 105 or 51.5 mm; 2.2mm/1.5 mm/1.5 mm; 2.2mm

Note:(a) Only Refuse Collection Point fenced with fixtures is surveyed and shown with line

pattern corresponding to the material of structure.(b) There are two types of Refuse Collection Point:

(1) "RCP" building or "RCP" Open-Sided Structure - draw the outline in appropriateFeature Code.

(2) "RCP" defined by surrounding feature - draw the outline with appropriate FeatureCode such as fence or wall.

(c) Annotate "RCP" with full proper name if there is enough space. Enter the name into theLookup Table as well.

R5

j RCP ITS

RCP

Suppress English

if space is

not available.

1 *RCP |

' \

| RCP

RESERVOIR I SERVICE RESERVOIR

General Guidelines:(a) Show limit of open reservoir by the dam and the outline of the water in full capacity

level.(b) Do not show details on top of a covered service reservoir. If there is another usage on top

such as playground, annotate its usage together with "(Service Reservoir under)".

Feature Layer: RELIEF / ROADFeature Code: PO - Open Reservoir /

PA - Covered Reservoir defined by Pavement or surrounding features onground

1 . Annotation: [Proper Name] of Reservoir (in italic)Anno Layer: GENANNOAnno Level: 1; 101 (Major), 2; 102 (Minor)Anno Size: 2.0 - 4.0 mm; 3.0 - 5.0 mm

R6

2. Annotation:Anno Layer:Anno Level:Anno Size:

3. Annotation:Anno Layer:Anno Level:Anno Size:

4. Annotation:

Anno Layer:Anno Level:Anno Size:

[Proper Name] of Open Service Reservoir (in italic)GENANNO4; 1041.5 mm; 2.2 mm

[Proper Name] of Covered Service ReservoirGENANNO4; 1041.5 mm; 2.2 mm

Service Reservoir; iS/RJ? (in italic),Covered Service Reservoir; WlISB^JCjjfiGENANNO5; 1051.5 mm; 2.2mm

Covered£££**Service Reservoir

!

F GAj-l 1 1 1-—l-txl-l 1 1„

Basketball Court

(«*£**)(Service Reservoir under)

PA

Service Reservoir

PO

I

I

HffE&ffCovered Service Reservoir

- • •

Basketball Court ^^^

(«E#»)(Service Reservoir under)

_{XJ I — I 1 1 1 1 1 1 tXJ-

K*BService Reservoir

R7

SHING MUN RESERVOIR

SHING MUN RESERVOIR

R8

REST GARDEN (See PARK.)

RESTRICTED ACCESS RHfft|ji*t (See also BARRED ACCESS.)

Feature Layer: MISCPTFeature Code: RANote:(a) Show the restricted access symbol "RA" for movable barrier at the entrance to Country

Park, Catchment area etc. Similar features restricting access to private properties such ashousing estate, car park are not surveyed.

(b) Permanent barrier is considered as "Barred Access".

RM

SOUTH LANTAU ROAD ft 31 §3

SOUTH LANTAU ROAD

RETAINING WALL Stfcffll (See VERTICAL CUTTING.)

RIDING FLOOR (See BUILDING.)

RIFLE RANGE (See FIRING RANGE)

R9

RIVER /STREAM $|f| (See also FLOW DIRECTION ARROW & NULLAH.)

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

RELIEFRV (River - double firm line), SR (Stream - single firm line), DA (Arrow)[Proper Name] (in italic)GENANNO1; 101 (Major), 2; 102 (Minor)1.5-2.5 mm; 2.2-3.8 mm

Note:(a) Show river wider than 3 m to scale in double firm lines as "RV" with flow direction arrow

in the middle. Show stream in single firm line as "SR" and input from upstream todownstream.

(b) Show seasonal stream with rocky bed in pecked line and annotate as "Rocky Stream Bed".(See also ROCKY STREAM BED.)

(c) Annotate proper name of river or stream only.

Watershed

. .Two arcs of opposite directions

The 1st flow arrow is at 7.5mmfrom the starting point of thearc and others at every 100mmalong the arc after the firstone.

RIO

PA HW

- 1

FfR

J71 A

DA-MF9&

SHING MUN RIVER

RV i DA

Outfall

RV

/\

SHA TIN HOI

F SW

JTI

SHING MUN RIVEROutfall

V

SHA TIN HOI

Rll

ROAD UK- / EXPRESSWAY 'Rg|£$& / HIGHWAY(See also BRIDGE & ELEVATED ROAD.)

/ STREET ffi I LANE

General Guidelines:(a) In general, all road margins are to be surveyed and shown to define road alignment. If

traffic islands and central dividers are considered to be significant, they are treated asroad margins and surveyed. In enclosed areas, only the outer limits of the main orsignificant access will be surveyed.

(b) Street furniture such as lamp posts and fire hydrants are surveyed. Do not show minordetails such as road sign, cabinet, inspection chamber, traffic camera, traffic light, railingetc.

(c) An abandoned or overgrown access road existing on survey sheet will be retained unlessall traces have disappeared. However, no further survey is required.

(d) All roads should be depicted by spot height at appropriate interval or where gradientchanges.

(e) Annotation of street name, gazetted or ungazetted, should be shown in upper case.Otherwise annotate as "Road".

(f) Do not break "RM" for spot heights, trees etc.(g) If a named road or a road annotated as "Road" passes through a gate into an enclosed

area, show it as "RM".(h) For double-strips road, show the outer limits only and regard it as surfaced road.

Feature Layer:Feature Code:1. Annotation:

Anno Layer:Anno Level:Anno Size:

2. Annotation:Anno Layer:Anno Level:Anno Size:

3. Annotation:Anno Layer:Anno Level:Anno Size:

ROADRM> RMU, FY, FYU[Name of Road] (Expressway or Major Road)ROAD

1.5 - 2.7 mm; 2.2 - 4.3 mm

[Name of Road] (Secondary Road or Minor Road)ROAD2; 1021.3 -2.2 mm; 2.0 -3.5 mm

Road, Lane, Elevated Road (Unnamed Road)ROAD3; 103Range 1.3 - 2.2 mm; 2.0 - 3.5 mm

R12

GA

NATHAN ROAD 31» H

J-±k-

RM LP

380-383

Alhambra Building

CD

R13

VC + RM (Suppressed)

GA | ' ' ' ' ' ' ' ' F

PAK PAT SHAN ROADRM

Road

^\WL 1

• uRM

GA

\

S"

U WL

RM

^

/ 3 5 7

OL

O.

9

BP

//

PAK PAT SHAN ROAD B*LUj!

Road

ROCK 5 /BOULDER /ROCKY ARE A /FLAT ROCK

General Guidelines:(a) Show rocks as generalized symbol. No new exposed rocks are surveyed except

significant boulder and flat rock along certain shorelines.(b) Show outline of the single boulder and internal crevices by freehand lines as "BO".

R14

(c) Show the outer limit of rocky area, group of boulders or exposed rock as "RKA". Showthe limit of rocky area along coastline and flat rock as "RKA" and suppress "HW" ifavailable. Annotate as "Rocky Area", "Boulders" or "Flat Rock" as appropriate.

(d) Retain contours passing through the rocky area.

1. SINGLE BOULDERFeature Layer: RELIEFFeature Code: BO, HW

2. GROUP OF BOULDERS / FLAT ROCKFeature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

RELIEFRKA, HWBoulders; ^5 , Flat Rock;RELIEF1; 1011.3-1.8 mm; 2.0 - 2.8 mm

, Rocky Area;

BO

RKA

Boulders

R15

ROCKY AREA (See ROCK.)

ROCKY STREAM (See also RIVER / STREAM.)

RELIEFRVRRocky Stream Bed;RELIEF

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Treat seasonal rocky streambed as stream.(b) Show the upstream and downstream limits of the rocky streambed as "RVR".

1.5 mm; 2.2mm

04,

R16

RUBBLE MASONRY (See ARTIFICIAL SLOPE.)

RUIN gjjg / DESERTED FORT

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show the outlines of ruined buildings in a group as "RU" and annotate as "Ruins".

Annotate "R" for one single ruin.(b) Treat deserted fort as ruins.(c) "BP", "OS" and "TS" have priority over "RU".

BLDGRUR (Symbol) or Ruins; fjpjfBLDGlor l ;1011.5 mm or 1.5 mm; 2.2 mm

OS

f --- *\I N

X

RU

mmRuins

RU

F\ /

X/ \\L—

mmRuins

I

RURAL COMMITTEE (See also VILLAGE OFFICE.)

Annotation:Anno Layer:Anno Level:Anno Size:Note:The Rural Committee serves the entire Heung/District and has a proper name.

[Proper Name]BLDGPOLY / GENANNO1; 101/4; 1041.5 mm; 2.2mm

R17

SAND TRAP (See CULVERT.)

SATELLITE ANTENNA (See ANTENNA.)

SCHOOL

General Guidelines:(a) For school without adjoining ancillary area, treat it as "Building Feature".(b) For school with ancillary area, form site polygon and input school name into the Lookup

Table. For individual building, annotate and input building name and address intoLookup Table.

(c) Annotate sports ground within school site if it is for sole use.

1. Single BuildingAnnotation: [Name of School]Anno Layer: BLDGPOLYAnno Level: 1; 101Anno Size: 1.3- 2.0 mm; 2*0 - 3,5 mm

2. Multi BuildingAnnotation: 1 [Name of School] / [Name of Building]Anno Layer: GENANNO / BLDGPOLYAnno Level: 3; 103 (University), 4; 104 (Others) /1; 101Anno Size: 1.5 - 2.2 mm; 2.0 - 3.5 mm /1.5 mm; 2.2 mm

BP

CL

8

631

)i««Java School

63 S

Q.

8

635

a.t

637

JAVA ROAD mmm.

631

Java School

633 635 637

JAVA ROAD

SI

BP

BP

_

GA

BP

m m 'J\ mJava Primary School

~

BP

Java Primary School

GA

BP

X\

N ^

./'OS

WL

CWY

cwCWY

OS/

\

BP

mmmmJava Col l«ge

BP

:§s»Java Hall

GA

S2

cw

mmmmJava College

Java Hail

SCULPTURE (See MONUMENT.)

SEAWALL (See also ARTIFICIAL SLOPE.)

Feature Layer: RELIEFFeature Code: SWAnnotation: Seawall;Anno Layer: RELIEFAnno Level:Anno Size:Note:(a) Treat sloping seawall as artificial slope. Depict the lower limit as "HWM".(b) Show vertical seawall in firm line. Annotate as "Seawall" on the seaward side.(c) Survey and show seawall under elevated structure, in suppressed mode if available.

1.5 mm; 2.2 mm

SW —i , •! ! Seawall -@P

*i ^ij s jL.J

-PA

HWM

S3

SeawallHWM

mm

SEPTIC TANK

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size: 1.5 mm; 2.2 mmNote:Show only prominent concrete septic tank greater than 20 m2 in firm line "FIR" and annotateit. ! - . \ -

MISCLINEFIRSeptic Tank;MISCLINE

SERVICE RESERVOIR (See RESERVOIR.)

SHAFT

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

(See also VENTILATION SHAFT.)

MISCLINEFIRShaft; M^MISCLINE1; 1011.3 mm -1.5 mm; 2.2 mm

a Shaft

S4

SUING MUN RESERVOIR SHING MUN RESERVOIR

SHIPYARD Jtfifg l/ SLIPWAY Iggp

General Guidelines: _(a) Show and annotate only the permanent structure, slipway and the limit of shipyard.(b) Do not show the High Water Mark and seawall under slipways.(c) Show only the outer limit if there is more than one slipway formed side by side.(d) Leave the upper and lower ends of slipways open.

1. SHIPYARDAnnotation:Anno Layer:Anno Level:Anno Size:

2. SLIPWAYFeature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

Shipyard;GENANNO5; 1051.5 mm; 2.2 mm

/ Shipyards

MISCLINEFIRSlipway;MISCLINE

I Slipways;

1.5 mm; 2.2mm

S5

GA GA-CXH

I I ***I DC Ct: I CKirvTron

GA

.

m

_:u.

[

1si

J_

'

Sf ilB HfSlipway Slipways

•i-;Slipway

HWM

I Shipyard 1

I |L_iitt HWM

IQJ$ mmSlipway Slipways

mmSlipway

SHRINE

General Guidelines:Show shrine to scale if its size is greater than 2 m2; otherwise show in solid dot.

1. SMALL SHRINEFeature Layer: MISCPTFeature Code:Annotation:Anno Layer:Anno Level:Anno Size:

SHSSHR (Symbol)Miscrri1.5mm

2. LARGE SHRINE —Feature Layer: MISCLINEFeature Code:Annotation:Anno Layer:Anno Level:Anno Size:

FIRSHR (Symbol)MISCLINE11.5 mm

©SHR

SHS

DSHR

FIR

SHR

SIGNAL MAST (See MAST.)

S6

SITE / ESTATE /SUBSITE

Feature Layer:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a)

SITE[Proper Name]GENANNO3; 103 (Major), 4; 104 (Minor)1.5 - 2.^mm; 2.2 - 3.5 mm

A site is an area of development, which may or may not be delineated by physicalfeatures. It can be a large enclosure of a private or public estate, a p£rk, a complex ofindustrial or commercial, residential or educational property.

(b) A site may be composed of more than one sub-site, which may or may not be delineatedby physical features. For example, the site Kingswood Villa (M^IUjtt) consists ofLocwood Court (^ |j^), Chestwood Court (IjI^Jjgj), Kenswood Court (jp^Jlj) etc.Each of which is considered as a sub-site.

(c) A site must have a proper name that is relatively prominent. The company/owner name isnormally not regarded as proper name. However, if the name is a landmark, it should beannotated as such.

(d) For site name, according to its importance, the annotation can be all in upper case(GENANNO Level 3), such as TADCOO SHINQ DYNASTY HEIGHTS, ete. or in upperand lower case (GENANNO Level 4), such as Sha Tm Heights, Tipea Wan Btaza, etc.

(e) Sub-site names are considered as part of the name of the buildings inside, and are inputinto the building name Lookup Table.

Location

Block 2, Chestwood Court,Kingswood Villas

Brilliance Court,Hillgrove Village,Discovery Bay

Entrv in Site NameLookup Table

Kingswood Villas

Discovery Bay

Entry in Building NameLookup Table

Chestwood Court Block 2

Hillgrove VillageBrilliance Court

(f) Note the following in demarcating the boundaries of a site or sub-site:(1) Delineate the boundary by the physical features identifiable on the ground.(2) If there are two or more lines in proximity to each other that are suitable for

delineating the boundary while there is no identifiable line of physical features,capture appropriate features from BMS or CIS. Capture contours and arbitrary linesin order of importance for forming the boundary of a site.

(3) Do not include the officially leased or allocated area outside its fenced or developedarea.

S7

(4) If a site is composed of several leased, allocated or vested areas like a big estate thatis physically separated by public roads or streets, the site should be a unifiedpolygon. Add arcs to connect the outermost boundaries of the separated areas.

(5) However, if the separated areas mentioned in (4) above are so scattered that theformation of a unique polygon would result in distortion of the size and shape of thesite, more than one polygon should be formed but with the same GEOREFNO value.

SITTING-OUT ARE A (See PARK.)

SKATING RINK (See BASKET BALL COURT.)

SLIPWAY (See SHIPYARD.)

SLOPING MASONRY (See ARTIFICIAL SLOPE.)

SLUICE

MISCLINEFIRSLU(Symbol)MISCLINE11.3-1.5 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show sluice only if it is wider than 2 m.(b) Annotation is not required.

S8

SPORTS GROUND / STADIUM (See also STAND.)

General Guidelines:(a) Show only permanent structure and grandstand. Do not show details underneath the

grandstand.(b) Show limits of site as defined by surrounding features.

1. NAMED SPORTS GROUNDAnnotation: [Proper Name]Anno Layer: GENANNOAnno Level: 3; 103 (Major), 4; 104 (Minor)Anno Size: 1.5 - 2.2 mm; 2.2 - 3.5 mm

2. UNNAMED SPORTS GROUNDAnnotation: Sports Ground; ^Anno Layer: GENANNOAnno Level: 5; 105Anno Size: 1.5 mm; 2,2 mm

or [Usage]

SPOT HEIGHT

Feature Layer:Feature Code: NilNote:(a) Add a label point at the position of the spot height. Input the spot height value into the

Attribute Table to onejiecimal place.(b) Legibility is the prime factor in placing the figure of the spot height.(c) Do not show spot height on top of building.(d) The density of spot heights should be sufficient to depict the general topography such as

vacant site, terrace, and gradient of road and hill summit.

The annotation can be placed at 11 of the 4 standard positionsaround the label point. 4

12.3

STADIUM (See SPORTS GROUND.)

STAIRCASE (See BUILDING.)

S9

STAND 5f •£ (See also SPORTS GROUND.)

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Annotate grandstand as "Stand".(b) Show "Stand" in a concrete building as "BP", otherwise as '(c) Show limits of permanent shelter as "OS".

BLDGPOLY/ROADBP/PAStand; 5f BLDG/GENANNO1; 101/5; 1051.5 mm; 2.2mm

TA".

PCC PEC

S10

STATION (See RAILWAY.)

STATUE (See MONUMENT.)

STEPS

Feature Layer: ROADFeature Code: STP / PANote:(a) Show the top and end of tread according to adjoining feature; otherwise shown as "PA".

Show steps in between as "STP".(b) Treat unpaved steps as footpath. Show landings shorter than 4 m as treads. Insignificant

treads with long distance apart are ignored and shown as footpath.(c) Space the tread about 1.3 mm evenly along the whole flight of stair.

Sll

(Show as PO if top step is notat same level of podium top.)

(Show as PA If top step isat same level of podium top.)

STREAM ggffil (See RIVER.)

S12

STREET @j (See ROAD.)

SUBSITE J&&J& (See SITE.)

SUBWAY

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

ROAD / MISCLINESWY/FIRSubway; frAHUSROAD3; 1031.5 mm; 2.2 mm

VC

PA ^~

VC

SWY

Subway

SWY

»

PAVC

Subway

OX

OO

S13

SWAMP $S? (See MARSH.)

SWIMMING POOL

RELIEFPO& (Symbol)RELIEF1

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Note:(a) Show swimming pool opens to the public, if it is larger than 50 m2.(b) For public swimming pool, show other features as per specification for Sports Ground or

Stadium.(c) Show private swimming pool in enclosed area or on podium if it exceeds 250 m2.(d) Do not show temporary features such as lifeguard towers, springboard or diving

platform.(e) Place the symbol as annotation at an appropriate position.

S14

TANK /FUEL TANK /GAS TANK /WATER TANK HfefcfcE

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

MISCLINEFIRTank; ftl, FT(Symbol), GT(Symbol), WT(Symbol)MISCLINElor l ;1011.3-1.5 mm or 1.5 mm; 2.2 mm

Note:Survey only prominent tank and annotate its usage if known by symbol. Otherwise annotateas "Tank".

FIR

OT FIR GT

TAXIWAY ?tffH (See AIRPORT.)

TEMPORARY STRUCTURE

1.5 mm; 2.2mm/1.5 mm

Feature Layer: BLDGPOLY / BLDGFeature Code: TSP / TSAnnotation: [Proper Name] / TS (Symbol)Anno Layer: BLDPOLY / BLDGAnno Level:Anno Size:Note:(a) A structure constructed of flimsy materials and appeared to be temporary is regarded as a

temporary structure.(b) The outer limit of an individual or a group of temporary structures of a size larger than 25

m2 is shown as "TS". Group together temporary structures of less than 2 m apart.(c) Ignore minor temporary structure within an enclosed area.(d) If there is a permanent structure of larger than 10m2 within a group of "TS", show the

outline of the permanent structure.(e) For temporary structure with identifiable limit, building name and address, create

building polygon "TSP" and annotate its name and address. Do not show house numberif the temporary structures are grouped together.

Tl

FC^X^. \ OS X

L' sTS

OS

BP

TS

I II \ TS

i ii i

-J L.

\ /X/

SL

TS

L-,\\

- ,____Jl '

TENNIS COURT (See BASKETBALL COURT.)

TOILET /LATRINE

BLDGPOLYBPH8 (Symbol)BLDGI

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Note:(a) Do not show temporary toilets or toilets made of flimsy materials.(b) Place the symbol as annotation within or next to the building.

T2

TOLLGATE

Annotation:Anno Layer:Anno Level:Anno Size:Note:Do not show kiosk and overhead shelter.

Tollgate; J&^fiGENANNO5; 1051.5 mm; 2.2 mm

Tol Igate

EWPA

PA

-FBR

Tollgate

\

V

/ I

/

EW

:

\

EE

TOPOGRAPHIC (See PLACE NAME )

TRACK

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

ROADTCTrack;ROAD3; 1031.5 mm; 2.2mm

Track-TC

Track

T3

TRAFFIC ISLAND (See ROAD.)

TRAIL @

Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show trail as footpath or road as appropriate and annotate its proper name.(b) If the trail coincides with a gazetted road, show the trail name in brackets after the road

name.

[Name of Trail]ROAD3; 1031.5 mm; 2.2 mm

TAI MO SHAN ROAD *KU4ai ( MACLEHOSE TRAIL _

TAI MO SHAN ROAD ( MACLEHOSE TRAIL

TRAMWAY (See also RAILWAY.)

General Guidelines:(a) Show platform as road margin and do not annotate.(b) Do not show tram station shelter.

RM

I I I I II 33=Tramway

I I I I £TWTW

RM

Tramway

T4

TREE 4$

Feature Layer: MISCPTFeature Code: TENote:(a) Do not survey trees except for those with cultural value.(b) Isolated and significant tree may also be shown.

. TE

TSZ TONG

BLDGPOLYBPTSZ (Symbol)BLDG1

11.3-1.5 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Add proper name to the Lookup Table if available.

TSZ BP

TUNNEL Rgj

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

(See also RAILWAY / ROAD.)

ROADTUR[Gazetted Name] or Tunnel; | MROAD1; 101 (Major), 2; 102 (Minor) or 3; 103 (Unnamed)1.5-2.5 mm; 2.2-3.8 mm, 1.5 mm; 2.2mm

Note:(a) Show vehicle and railway tunnels only.(b) Show vehicle tunnel up to the road margins.(c) Show railway tunnel up to its limit.(d) Suppress railway track inside tunnel if available.

T5

TUNNEL PORTAL LP

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:

MISCLINEFIRTunnel Portal; 1MISCLINE1; 1011.5 mm; 2.2 mm

T6

TUR

» S T

-VC

Roils (Suppressed if available)!") JT Tuitit*t Portal HMD

TUR

• ST

Tunnel Portal UltD

TYPHOON SHELTER (See also BREAKWATER.)

General Guidelines:(a) If a breakwater provides a typhoon shelter, the gazetted name should be annotated,

otherwise annotate as "Typhoon Shelter".(b) Show the limit of the typhoon shelter in "RM", UPA", or "PEC" as defined by the nature

feature.(c) Show the limit on seaward side as "HW" with annotation "HWM".

1 . NAMED TYPHOON SHELTERAnnotation: [Proper Name] (in italic)Anno Layer: GENANNOAnno Level: 1; 101 (Major), 2; 102 (Minor)Anno Size: 1 .5 - 2.7 mm; 2.2 - 4.0 mm

2. UNNAMED TYPHOON SHELTERAnnotation: Typhoon Shelter, JUMtJi (in italic)Anno Layer: GENANNOAnno Level: 5; 105Anno Size: 1.5 -2.7 mm; 2.2- 3.5 mm

T7

URNS (See BURIAL URN.)

UTILITY FEATURES £HJ

General Guidelines:Only the following features are to be surveyed and shown. Refer them to their respectivefeatures for details.

(1) Electricity Poles(2) Electrical Transformers(3) High Tension Power Lines(4) Lamp Posts(5) Fire Hydrants

Ul

VENTILATION SHAFT ?

BLDGPOLY / MISCLINEBP/FIRVS (Symbol)BLDG / MISCLINE1/11.5 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:Show air or ventilation shaft of any tunnel system that is considered significant as permanentbuilding. ,

FIR

VERANDAH %M (See BUILDING.)

VERTICAL CUTTING ffJJK / VERTICAL SLOPE mflg (See also ARTIFICIAL SLOPE.)

/ RETAINING WALL |Jtt

Feature Layer: RELIEFFeature Code: VCNote:Suppress vertical cutting symbols if they project into any lane or path less than 1.5 m wide.

VC

VI

VILLAGE OFFICE (See also RURAL COMMITTEE.)

BLDGPOLYBP[Proper Name] / VO (Symbol)BLDGPOLY/BLDG1; 101/11.5 mm; 2.2 mm /1.5 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Show details of Village Office as defined by surrounding features if it consists of more

than one building.(b) The Village Office serves only a single village and is sometimes called Village Hall or

Joint Rural Committee or Rural Association.

V2

WALL / FREE STANDING WALL {ft

Feature Layer: BDYFEATFeature Code: WLNote:(a) Define free standing wall with a minimum height of 0.5 m as "WL".(b) If the wall is thicker than 1 m, show it to scale in "FIR" or appropriate feature code and

annotate its usage.

WL

BP

GA WL GA WL

WL

38

BP

38

iWL

WASHED-OUT ARE A

MISCLINEPECWashed-out Area;MISCLINE

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Do not show washed-out area smaller than 250 m2.(b) Show contours within washed-out area as "uncertain" if available.

1.3 -1.8 mm; 2.0 -2.7 mm

WATER TANK / WATER TOWER (See TANK.)

Wl

WATERFALL

Feature Layer: RELIEFFeature Code: CLNote:Use cliff symbol for riverbed. See "Cliff' for details.

WEIR ig

Feature Layer: ROADFeature Code: PANote:(a) Show weir over 1 m wide as "PA".(b) Do not annotate it.

W2

WELL #

Feature Layer: MISCPTFeature Code: WAnnotation: W (Symbol)Anno Layer: MISCPTAnno Level 1Anno Size: 1.5mmNote:Survey significant communal well only.

The annotation can be placed at 7 8 11 of the 8 standard positions 6 4 - 2around the label point. 5 4 3

WHARF (See JETTY.)

WORKS IN PROGRESSOF RECLAMATION iR$ftft / BORROW AREA(See also PROPOSED INFRASTRUCTURE.)

/ CONSTRUCTION IN PROGRESS / LINE/ DUMPING AREA

MISCLINEWIPWIP (with Month & Year) (Symbol)MISCLINE11.5-2.2 mm

Feature Layer:Feature Code:Annotation:Anno Layer:Anno Level:Anno Size:Note:(a) Define the approximate limit of an area in pecked line as "WIP" where there is

construction, demolition, dumping, excavation, reclamation etc. in progress.(b) Show adjoining "WIP" sites as one unless divided by fences.(c) Show the annotation "WIP" together with the date of survey within the site.(d) For reclamation site, annotate the limit of reclamation as "Line of Reclamation" and the

date of survey at the landside along the line of reclamation.(e) Do not survey details within a "WIP" site where works are actively in progress. Show

major proposed features if available at "Proposed Layers".

W3

WIP BP WIP BP

WIPDec2001

BP BP WIP Dec 2001 BP

WIPDec

2001

sw

WiP Dec 2001

I—WIP BP

YUNG SHUE WAN

( > > i t WIP t <it t

Line of redomotlon Dec 2001 2 0 0 1^1

WIP WiPWIP Dec 2001

WIP

YUNG SHUE WAN

i Line of reclomation Dec 2001 2 0 C

WJP Dec 2001

Seawall '

I , I

.—sw

W4

BMS Colour Check Plot Legend - Line Types

B D Y F E A T_, Problem

CU

GAC=B—B=

WH

WL

BLDGProblem

CA

OS

PD

PV

RU

TS

BLDGPOLY^ Problemo

BP

BAff

BUP

IBP

OSP

PWP

TSP

C O N T O U R-^ Problem

CIS

CIU

CNS

CNU

M I S C L I N E

- — _

CHL

FIR

FRB

NB

PEC

PWL

PY

WIP

P B L D G P O L Y^ Problem0

BP

PROPINFRA^ Problem0

pp

RV

SW

P R O P R O A D_ Problem0

FY

KCR_ _

= = _ _ my*L =MTR

PT_

RM

TUR

TW

RAILProblem

KCR

LRT

MTR

PT

RELIEF^ Problem

BO

CLnTCW

HW

PO

QB

RKA

RV

RVR

SB

SR

ST

SW

VC

R O A DProblem

CWY

FBR

FBU

FP

FPW

FY

FYU

PA

PAU

RM

RMU

STP

SWY

-JL

TUR

BMS Colour Check Plot Legend - Symbols & Fonts

MISCPT2) Problem

• BEA Beacon/Light

jQ CEM Cemetery Symbol

o DOT Unclassified Dot Feature

© GVS Grave (Small)

± MA Marsh/Swamp

Q MN Mangrove

• MO Monument/Sculpture/Obelisk

X MTE MTR Entrance

® RA Restricted Access

SHS Shrine (Small)

TE Tree

u) URS Burial Urn (Small)

D VB Vehicular Barrier

o W Well

UTILPT(?) Problem

« EP Electricity Pole

© ETP Electrical Transformer (Pole)

* FH Fire Hydrant (Fresh water)

* SFH Fire Hydrant (Sea water)

* LP Lamp Post

SPOTHTinn

•f^ Spot Height

o

0

Annotation Fonts and Colours for Different Layers

Layer

BLDGPOLY

BLDGCONTOURGENANNOMISCLINEMISCPTPBLDGPOLYPROP1NFRA

PROPROADRAILRELIEF

ROADUTILPT

Annolevel 1

Ka Yan Bldg*Podium

300

TIN SAMPipelineAntenna

Disney Hse*Prop. Seawall

DISNEY ROAD*Tramway

Seawall

QUEENSWAY*ET

Annolevel 2

2-10

298

SHA TIN HOI

2-10

JAFFE ROAD*

Annolevel 3

KORNHILL

Prop, Road

Subway

Annolevel 4

Sha Tin Park

Annolevel 5

Playground

Layer

BLOGPOLY

BLDGCONTOURGENANNOMISCLINEMISCPTPBLDGPOLYPROPINFRAPROPROADRAILRELIEF

ROADUTILPT

Annolevel 101

JD t * • *¥£

H68 If

*«1 ± ! « *1111l±jg&*111Miill*

Annolevel 102

®B%

Annolevel 103

Ilij

ft All

Annolevel 104

}'J> ffl fi i

Annolevel 105

* Annotation in Anno Subclass

BMS Colour Check Plot Legend - Symbols & Codes

B D Y F E A TCU Cultivation Bund

F Fence

GA Gate

WH Free Standing Wall in Tenement Block

WL Free Standing Wall

BLDGCA Canopy/Balcony/Overhanging Structure

OS Open-sided Structure

PO Podium

PU Podium under Elevated Structure

PV Pavilion

RU Ruin

TS Temporary Structure

11 Toilet

BLDGPOLYBP Building Outline

Building Outline (Suppressed for Anno)BAP

BUP

IBP

OSP

PWP

TSP

Building Outline under Elevated Structure

Imaginary Building Subdivision Line

Open-sided Structure (with Address)

Party Wall/Building Subdivision Line

Temporary Structure (with Address)

CONTOURCIS Index ContourClU Index Contour (Uncertain)

CNS Contour Line

CNU Contour Line (Uncertain)

G E N A N N OS'l Dangerous Goods Store^a*¥* Declared Monument

MISCLINECHL Chimney

FIR Culvert/Large Grave/Large Shrine/Pipeline/

Tank/Unclassified Firm Line Structure

FRB Firirvg Range Boundary/

Rifle Range Boundary

NB Noise Barrier

PEC Archway/Unclassified Pecked Line Structure

PWL Power Line

PY Pylon

WIP Works In Progress

PBLDGPOLYBP Proposed Building Outline

PROPINFRAPD Proposed Podium

RV Proposed River/Channel

SW Proposed Seawall

PROPROADFY Proposed Elevated Road/Bridge

KCR Proposed Kowloon-Canton Railway

LRT Proposed Light Rail Transit

MTR Proposed Mass Transit Railway

PT Proposed Peak Tramway

RM Proposed Road Margin

TUR Proposed Tunnel

TW Proposed Tramway

R A I LKCR Kowloon-Canton Railway

LRT Light Rail Transit

MTR Mass Transit Railway

PT Peak Tramway

TW Tramway

RELIEFBO Boulder/RockCL Cltff/Woterfoli/Quarry Top

CW Catchwater

DA Flow Direction Arrow

HW High Water Mark/Side Wail of Nullah Lower Limit

PO Fountain/Moat/Pond/Pool/Reservoir/

Service Reservoir (Open)/Swimming Pool

QB Quarry Bottom

RKA Rocky Area/Group of Boulders/Flat Rock

RV River/Nullah/Canal Bank

RVR Rocky Stream Bed

SB Slope Bottom

SR Stream/Drain (Single Line)

ST Slope Top

SW Seawall

VC Vertical Cutting/Retaining Wall

^ Swimming Pool

ROADCWY Covered Walkway

FBR Elevated Walkway (Footbridge over Road or Water)

FBU Footbridge under Elevated Structure

FP Footpath

FPW Footpath > 1.5 m wide

FY Elevated Road (Flyover)/Road Bridge or Rail Bridge

FYU Flyover under another Elevated Structure

PA Pavement/Paved Area

PAU Pavement/Paved Area under Elevated Structure

RM Road Margin

RMU Road Margin under Elevated Structure

STP Steps

SWY Pedestrian Subway

TC TrackTUR Vehicle or Rail Tunnel (Including Cross-Harbour Tunnel)

Index

Aerial RopewayAirportAmusement ParkAncient TombAntennaArcadeArchwayArtificial SlopeAviary

BBalconyBarbecue AreaBarred AccessBasketball CourtBazaarBeachBeaconBicycle Parking Space ]Bicycle TrackBoardWalkBorrow AreaBoulderBoulder BarrierBreakwaterBridge (Road & Rail)Bridge TowerBuildingBuilding OutlineBuilding FootprintBuilding NameBurial UrnBus Terminus

CCanopyCar ParkCargo Handling AreaCatchwaterCement WorksCemetery

AlAlA2A2A3A3A3A4A7

BlBlBlB2B2

B2B3B3B4B4B4B4B5B5B6B7B8B9BIOB13B17B17

ClClC2C2C3C3

CenotaphChimneyCliffColumbariumConduitConstruction in ProgressContainer TerminalContour LineConveyorCovered WalkwayCultivationCulvert

DDamDangerous Goods StoreDeclared MonumentDeserted FortIJtackyardDolosseDd ilinPrateDumping Area

EElectricity PoleElectricity PylonElectrical TransformerElectricity SubstationElevated PlatformElevated RoadElevated WalkwayEnclosed AreaEscalatorEstateExpressway

FFenceFibre DamFilter Bed

C4C4C4C5C5C5C5C6C7C8C9CIO

DlD2D3D3D4D4D4D4D4

ElElElElE2E2E3E3E4E4E4

FlFlFl

1 Fire HydrantFiring RangeFlagstaffFlat RockFloating JettyFloating RestaurantFlow Direction ArrowFlyoverFootball FieldFootbridgeFootpathFountainFree Standing WallFuel Tank

Gas Filling StationGas TankGateGolf CourseGraveGround Floor Annotation

F2

F2

F3

F3

F4

F4

F5

F5

F5

F6

F8

F9

F9

F9

Gl01GlGlG2G3

LLamp postLaneLatrineLightLight Rail TransitLight WellLine of ReclamationLPG Filling Station

MMangroveMarshMastMenagerieMoatMonumentMTR Access

NNoise BarrierNullah

LlLILlLlLlLlLlLl

MlMlM2M2M3M4M4

NlN2

HHelicopter Landing PadHigh Water MarkHighwayHouse NumberHydrographic Name

Imaginary LineIncineratorInterchange

JJettyJut

KKowloon Canton Railway

HIHiH2B 1 4H2

B13II

Kl

QObeliskOpen AreaOpen-sided StructureOssuariumOutfallOverhanging Structure

pPagodaParkPartition WallPaved AreaPavementPavilionPeak TramwayPetrol Filling StationPicnic SitePierPipeline

Ol01OlOl02O2

PIPIP2P2P2P3P3P3P4P4P4

Place NamePlaygroundPleasure GardenPodiumPondPoolPower LinePower Line PylonPower StationProposed InfrastructurePump HousePumping StationPylon

QQuarry

RRacecourseRacetrack :RailwayRampRecessRefuse Collection PointRefuse Collection StationReservoirRest GardenRestricted AccessRetaining WallRiding FloorRifle RangeRiverRoadRockRocky AreaRocky Stream BedRubble MasonryRuinRural Committee

SSand TrapSatellite AntennaSchool

P5P6P6P6P6P6P7P7P8P8P12P12P12

Ql

RlRlRlR4R5R5R5R6R9R9R9R9R9RIOR12R14R16R16R17R17R17

SISISI

SculptureSeawallSeptic TankService ReservoirShaftShipyardShrineSignal MastSiteSitting-out AreaSkating RinkSlipwaySloping MasonrySluiceSports GroundSpot HeightStadiumStaircaseStandStationStatueStepsStreamStreetSubsiteSubwaySwampSwimming Pool

TTankTaxiwayTemporary StructureTennis CourtToiletTollgateTopographic NameTrackTraffic IslandTrailTramwayTreeTsz TongTunnelTunnel PortalTyphoon Shelter

S3

S3

S4S4

S4

S5S6S6S7

S8S8S8S8S8S9S9S9S9S10SllSllSllS12S13S13S13S14S14

TlTlTlT2T2T3T3T3T4T4T4T5T5T5T6T7

uUrns UlUtility Features Ul

VVentilation Shaft VIVerandah VIVertical Cutting VIVertical Slope VIVillage Office V2

WWall WlWall in Tenement Block B12Washed-out Area WlWater Tank WlWater Tower WlWaterfall W2Weir W2Well W3Wharf W3Works in Progress W3

'*«Aft^°

X1S711130