w6324 - creative laundry systemsventless), w6324/t744c condenser dryer any asko family-size dryer...
TRANSCRIPT
Asko Appliances, Inc
PO BOX 940609 • Plano • Texas • 75094
www.askousa.com
W6324W LINE SERIES TM CLASSICType: Front-load, Family-size washer, ADA Compliant Colors: White (W)
PROGRAMS Sani, White, Color, Quick, PermaPress, Wool / Handwash
OPTIONSUp to 1200 RPM speed, 3 Temperatures up to 140ºF, Super rinse (up to 7 rinses), High wash water level
CAPACITYUltraCareTM family-size – 2.12 cu. ft.
TECHNOLOGYLine SeriesTM Classic LCD display with SmoothDial TM
technology, Internal water heater produces optimal temperatures during main wash, Automatic load balancing, Electronic automatic door latch, Thermistor electronic sensor ensures accurate wash temperatures within +/-1ºF, and Aqua BlockSystem CONSTRUCTIONNew ActiveDrum
TM
, QuattroTM commercial design, SmartSeal TM door gasket, Stainless Steel inner/outer drum, Heavy duty life-tested motor, Galvanized steel base, Cast iron counter balance weights andrear flywheel. Noise level 54 dB(A)wash / 74 dB(A) spin
ASKO Laundry Care
W6324
W6324W & T744CW
33Specifications are subject to change without notice. See installation instructions for additional details.
PLanning & Design: FAMILy-SIZEWASHERS–LINESERIES™ CLASSIC
W6324
UnitDimensions US METRICHEIgHT: 33 ½˝ – 34 ½˝ 851 – 876 mmWIDTH: 23 ½˝ 597 mmDEPTH: 23 7/8˝ 606 mm DEPTHW/DOOROPEN: 36˝ 914 mm WEIgHT: 172 lbs 78 kg
Technical DataSupply voltage Single-phase
208-240V,60HzWater Pressure 15 – 146 psiMax Wattage 2200 WPowercord 220V,20Amp(attached)
IMPORTANT:ONLyUSETHEWATERSUPPLyHOSEPROVIDED WITHTHISMACHINE.ASKOprovidesaqualityPEXwaterfillhosethatutilizesaUSstandard¾˝brassconnectionfittingforattachmentonthe watersupply/faucetsideandaMetricthreadedfittingforthewasher side connection.
Every ASKO washer is delivered ready-fitted with a plug and is intended for connection to an ASKO dryer, which is equipped with a matching receptacle. If the washer is used separately or with another dryer, it must be on a separate220V,20Ampsingle-phasecircuit.
Second-floor (above grade) installations must meet all local building codes.
When placing the washer next to a wall or cabinet, be sure to leave ¼˝ (6 mm) of space between the washer and the wall or cabinet.
23 7/8˝ (606 mm)1 ¾˝
(44 mm)
Power
cord
Inlet
valve
Drain
hose
6 ¼
˝(1
60 m
m)
4 ¾˝ (120 mm)
3 1/8˝(80 mm)
36˝ (914 mm)23 5/8˝
(597 mm)
33 ½
˝ – 3
4 ½
˝(8
50 –
876
mm
)
37
4 1/8˝(105 mm)
46 ¼˝(1175 mm)
23 7/8˝(606 mm)
23 ½˝(597 mm)
36˝(914 mm)
38 ½
˝ –
40 ½
˝ **
(978
mm
– 1
028
mm
)
With
6˝
Hid
denH
elpe
r™:
72 ¾
˝ –
74 ¾
˝(1
848
mm
– 1
898
mm
)66
¾˝
– 6
8 ¾
˝(1
695
mm
– 1
746
mm
)
Specifications are subject to change without notice. See installation instructions for additional details.
PLanning & Design:FAMILy-SIZESTACKEDLAUNDRyPAIRS–LINESERIES™ CLASSIC
W6324/T744(Ventless),W6324/T744CCondenserDryer
Any ASKO family-size dryer can be mounted on top of any matching ASKO washer. Stacking kits are provided with the ASKO family-size dryer.RefertotheASKO family-size dryer Use and Care Guide for stacking instructions.
Every ASKO family-size washer is delivered ready-fitted with a plug and is intended for connection to an ASKO family-size dryer which is equipped with a matching receptacle. When an ASKO family-size washer is connected to the ASKO family-sizedryer,use220V,30 Amp sin gle-phase circuit. When the ASKO family-size dryer is on a separateoutlet,use220V,20Ampsingle-phase circuit. If the washer is used separately or with another dryer,itmustbeonaseparate220V,20 Amp single-phase circuit.
When placing a stacked set next to a wall or cabinet, be sure to leave ¼˝ (6 mm) of space between the washer and the wall or cabinet.
NOTE : Condenser dryers require adequate ventilation for proper operation. A louvered door is recommended for closet installations.
ASKO condenser dryers must be installed to continuously drain through a hose attached to the rear of the machine. To ensure proper drainage, the drain must not be higher than 40˝ (1016 mm) above the bottom of the dryer.
See page 33 for venting requirements.
See page 34 for condensation drain requirements.
See page 38 for stacked cabinet or closet installation dimensions.
WARNING! Never stack a washer on top of a dryer!
WARNING! To reduce the risk of fire, vented dryers must be exhausted OUTDOORS or the equivalent.
Never cover the end of the dryer stub or vent hose with anything to catch lint,
Dimensions US METRICHEIgHT 67˝– 69˝ 1702 – 1753 mmHEIgHTW/6˝ HH:** 73˝– 75˝ 1854 – 1905 mmWIDTH: 23 ½˝ 597 mmDEPTH: 23 7/8˝* 632 mmWEIgHT: 247 – 265 lbs 112 – 120 kg
*Includes control knob. ** Height with 6˝ (152 mm) HiddenHelper™ installed. The following 6˝ (152 mm) height
HiddenHelpers models are available – HI115, HDB115, HB115.
** No venting required for condenser dryer (T753C). When HiddenHelper™ is specified, see pages 42-43. The following 6˝ (152 mm) height HiddenHelpers models are available HI115, HDB115, HB115.
39Specifications are subject to change without notice. See installation instructions for additional details.
PLanning & Design: FAMILy-SIZELAUNDRy
STACKEDCABINETORCLOSETINSTALLATIONS
ASKO´s front controls make it possible to install the washers and dryers under a cabinet or in a closet. Make sure there is a ¼˝ (6 mm) minimum clearance between units and cabinet or wall. To ensure proper ventilation, we recommend louvered doors, particularly for condenser dryers.
Every ASKO family-size washer is delivered ready-fitted with a plug and is intended for connection to an ASKO family-size dryer which is equipped with a matching receptacle. When an ASKO family-size washer is connected to the ASKO family-size dryer, use220V,30Ampsingle-phasecircuit.WhentheASKO family-sizedryerisonaseparateoutlet,use220V,20Amp single-phase circuit. If the ASKO family-size washer is used separately or with another dryer, it must be on a separate 220V,20Ampsingle-phasecircuit.
vented Dryer OpeningT794FI, T784 and T754 family-size dryers can be vented from the rear, left or right side. The cabinet cutout illustrated below gives the dimensions for a rear exhaust.
See page 33 for venting requirements.
Condenser Dryer OpeningASKO condenser dryers must be installed to continuously drain through a hose attached to the rear of the machine.
To ensure proper drainage, the drain must not be higher than 40˝ (1016 mm) above the bottom of the dryer.
See page 34 for condensation drain requirements.
NOTE: To avoid crimping the electrical and water con nec tions, do not install the hookups between the area of 26˝ (660 mm) to 35˝ (889 mm) from the floor (as indicated by shaded area in illustrations above).
For stacked installations, we recommend a 6' (1829 mm) cord.
Never cover the end of the dryer stub or vent hose with anything to catch lint, except for a UL-approved vent bucket.
When HiddenHelper™ is specified, see pages 46-47. The following 6˝ (152 mm) height HiddenHelpers models are available - HI115, HDB115, HB115.
WARNING! To reduce the risk of fire, vented dryers must be exhausted OUTDOORS or the equivalent.
NOTE: A louvered door is recommended for closet installations using an ASKO condenser dryer.
72 ¾
˝ –
74 ¾
˝(1
848
mm
– 1
898
mm
)w
ith 6
˝ H
idde
nHel
per™
72 ¾
˝ –
74 ¾
˝(1
848
mm
– 1
898
mm
)w
ith 6
˝ (1
52 m
m) H
idde
nHel
per™
\
67 ½
˝ –
69
½˝
(171
5mm
– 1
765
mm
)
67 ½
˝ –
69 ½
˝(1
715
mm
– 1
765
mm
)
220V 30 AmpSingle Phase
Outlet
See note
220V 30 AmpSingle Phase
Outlet
See noteCold Water
Drain
Cold Water
Drain
Height with 6 ̋(152 mm) HiddenHelper™:45 ¼˝ – 46 ¼˝
(1149 mm – 1174 mm)
4 1/8˝(105 mm)
24 ½˝ minimum(622 mm)
24 ½˝ minimum(622 mm)
15 ¾
˝ m
in(4
00 m
m)
15 ¾
˝ m
in(4
00 m
m)
39 ¼
˝ –
40 ¼
˝(9
97 m
m –
10
22m
m)
25˝
(635 m
m) 25˝
(635 m
m)
72 ¾
˝ –
74 ¾
˝(1
848
mm
– 1
898
mm
)w
ith 6
˝ H
idde
nHel
per™
72 ¾
˝ –
74 ¾
˝(1
848
mm
– 1
898
mm
)w
ith 6
˝ (1
52 m
m) H
idde
nHel
per™
\
67 ½
˝ –
69
½˝
(171
5mm
– 1
765
mm
)
67 ½
˝ –
69 ½
˝(1
715
mm
– 1
765
mm
)
220V 30 AmpSingle Phase
Outlet
See note
220V 30 AmpSingle Phase
Outlet
See noteCold Water
Drain
Cold Water
Drain
Height with 6 ̋(152 mm) HiddenHelper™:45 ¼˝ – 46 ¼˝
(1149 mm – 1174 mm)
4 1/8˝(105 mm)
24 ½˝ minimum(622 mm)
24 ½˝ minimum(622 mm)
15 ¾
˝ m
in(4
00 m
m)
15 ¾
˝ m
in(4
00 m
m)
39 ¼
˝ –
40 ¼
˝(9
97 m
m –
10
22m
m)
25˝
(635 m
m) 25˝
(635 m
m)
Cutout Dimensions US METRICHEIgHT: 67 ½˝ – 69 ½˝ 1715 – 1765 mmHEIgHTw/HH:* 72 ¾˝ – 74 ¾˝ 1845 – 1870 mmWIDTH: 24˝ 610 mmDEPTH: 25˝ 635 mm*Height with 6˝ (152 mm) HiddenHelper™ installed
Height does not include the height of any vent duct materials.
Height does not include the height of any vent duct materials.