warranty lloyd tm lavatory & metal console...Ø 5/16" (8mm) provide adequate reinforcement...
TRANSCRIPT
LLOYDTM LAVATORY & METAL CONSOLE
LF930MCP (LT930 + F930MCP)
LF930.4MCP (LT930 + F930.4MCP)
LF930.8MCP (LT930 + F930.8MCP)
If you are installing this product in a new construction or remodel, please makesure you are following all local plumbing and building codes. Carefully unpack andexamine your new vanity for damage. To help insure that the installation processwill proceed smoothly and correctly, please read these instructions carefully beforeyou begin
!Warning
Ignoring these symbols may cause personal injury and/or property damage
1. TOTO® warrants its products to be free from manufacturing defects under normal use and service for a period of one (1) year from the date of purchase. This warranty is extended only to the ORIGINAL PURCHASER.2. TOTO®'s obligations under this warranty are limited to repair or replacement, at TOTO®'s option, of products or parts found to be defective, provided that such products were properly installed and used in accordance with OWNER'S MANUAL. TOTO® reserves the right to make such inspections as may be necessary in order to determine the cause of the defect. TOTO® will not charge for labor or parts in connection with warranty repairs or replacements. TOTO® is not responsible for the cost of removal, return and/or reinstallation of products.3. This warranty does not apply to the following items: a) Damage or loss sustained in a natural calamity such as fire, earthquake, flood, thunder, electrical storm, etc. b) Damage or loss resulting from any unreasonable use, misuse, abuse, negligence, or improper maintenance of the product. c) Damage or loss resulting from removal, improper repair, or modification of the product. d) Damage or loss resulting from sediments or foreign matter contained in a water system. e) Damage or loss resulting from improper installation or from installation of a unit in a harsh and/or hazardous environment.4. This warranty gives you specific legal rights. You may have other rights, which vary from State to State.5. To obtain warranty repair service under this warranty, you must take the product or deliver it prepaid to a TOTO®
service facility together with a letter stating the problem, or contact a TOTO® distributor or products service contractor, or write directly to TOTO® U.S.A., INC., 1155 Southern road, Morrow, Georgia 30260, (888) 295-8134. If, because of the size of the product or nature of the defect, the product cannot be returned to TOTO®, receipt by TOTO® of written notice of the defect shall constitute delivery. In such case, TOTO® may choose to repair the product at the purchaser's location or pay to transport the product to a service facility.
THIS WRITTEN WARRANTY IS THE ONLY WARRANTY MADE BY TOTO. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER.TOTO® SHALL NOT BE RESPONSIBLE FOR LOSS OF USE OF THE PRODUCT OR FOR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR EXPENSES INCURRED BY PURCHASER, OR FOR LABOR OROTHER COSTS DUE TO INSTALLATION OR REMOVAL, OR COSTS OF REPAIRS BY OTHERS, OR FOR ANYOTHER EXPENSE NOT SPECIFICALLY STATED ABOVE. EXCEPT TO THE EXTENT PROHIBITED BYAPPLICABLE LAW, ANY IMPLIED WARRANTIES, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FORUSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WARRANTY. SOME STATES DO NOT ALLOWLIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS. OR THE EXCLUSION OR LIMITATION OFINCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSION MAY NOTAPPLY TO YOU.
Warning! TOTO® shall not be responsible or liable for any failure of, or damage to, this plumbing product or productcomponent caused by either chloramines in the treatment of public water supply or in-tank bowl cleaners containingchlorine (calcium hypochlorite).
Note: The use of high concentration of chlorine or chlorine related products can seriously damage the fittings. This damage can cause leakage and serious property damage.
For more information, please call TOTO® Tech Support at (888) 295-8134.
1155 Southern RoadMorrow, GA 30260
770-282-8686
Page 8 ©2004 TOTO USA
INSTALLATION MANUAL
WARRANTY
Page 1
BEFORE INSTALLATION
0GU02511-22-04
0GU02511-22-04
Page 7
ROUGH-IN DIMENSIONS ATTACHMENT OF THE VANITY TO WALL
Page 2
The washbasin, faucets, stop valve, and metal drain fittings need to be purchased separately.
The "*" denotes the wood screw position. Prepare a reinforcing cross bar of 1-1/8" (30mm) or more in thickness.
The " " mark the position of the anchor bolts.
*19-5/8" (500mm)
*26" (660mm)
*18-1/4"(465mm)
*26"
(66
0mm
)
34"
(864
mm
)
W.L
.
F.L.
28-3/4" (730mm)
19-5
/8"
(500
mm
)
7-7/8" (200mm)
31-5
/8" (
804m
m)
5 As shown it the figure below, attach vanity to the wall and ensure thatframe remains horizontal. Also insure that the direction of the leg is thesame as that of the foot.
Frame
Wall attachment screw
Screw cap
Horizontal
Ø 1/4"(5.8mm) x 2"(51mm)
26"
(660
mm
)
Anchor - As neededØ 5/16" (8mm)
INSTALLATION OF THE LAVATORY6 Install the Lavatory to the console as shown in the figure. Level thelavatory via adjustable spacers. Apply caulking between thelavatory and the spacers.
Apply caulking seal to adjustable spacers, washbasin
Lavatory Anchor bolt (Included with Lavatory) Ø 5/16" (8mm)
INSTALLATION CHECKEnsure that the vanity is level and firmly attached to the wall and floor. Also makesure that there are no loose screws.To clean the product, wipe using a well-wrung wet cloth. Only use a diluted neutraldetergent for stubborn stains. Refer to owner manual for the detailed cleaning instructions.
Page 6
INSTALLATION DIAGRAM
INSTALLATION OF THE FEET
Page 3
3 Install the feet to the adjustable spacer. Ensure that feet are level.
INSTALLATION OF THE LEG TO THE FEET4 Install the holder (lower) and the leg to the foot. Install adjustablespacers on the leg. At that time, ensure that the adjustable spacerprotrudes from the holder (upper) by ¼" (6mm).
Reinforced support bar
!Warning
Adequate reinforcement is required in orderto secure the vanity to the wall and floor.
Adjustable spacer
Holder (upper)
Frame
Wall attachment screw
Screw cap
Installation screwLeg
Holder (lower)
Foot
Floor attachment screw
Adjustable spacer
Anchor - As neededØ 5/16" (8mm)
Anchor - As neededØ 5/16" (8mm)
Ø 3/16"(4.5mm) x 2"(50mm)
Ø 1/4"(5.8mm) x 2"(51mm)
5/16"(8mm) x 5/8"(16mm)
Foot
Adjustable spacer
Horizontal
Adjustable spacer
Adjustable spacer
Holder (upper)
Holder (lower)
Holder (upper)
Leg
Foot
Leg
1/4"(6mm)
Page 5
PACKAGING LIST
PACKAGING LIST INSTALLATION OF ADJUSTABLE SPACER
Page 4
1 Using the template, install adjustable spacer to the floor.
INSTALLATION OF FRAME2 Install the legs on the frame as shown in the figure below.
Holder (upper) (Qty=2)Frame (Qty=1)Template (Qty=1)
Leg (Qty=2) Foot (Qty=2) Owner's manual (Qty=1) Installation screw (Qty=2)
Adjustable spacer (Qty=4) Floor attachment screw& Anchor (Qty=2) Screw Cap (Qty=2)
Wall attachment screw& Anchor (Qty=2)
Holder (lower) (Qty=2)
Ø 3/16"(4.5mm) x 2"(50mm)
Ø 1/2"(12mm)
3/4"(20mm) x 3/4"(20mm)
3/4"(20mm)1-3/16"(30mm)
28-3/8"(720mm)
1-3/16"(30mm)
26-1/8"(665mm)
29-1/8"(740mm)
7-1/
4"(1
85m
m)
Ø 1/4"(5.8mm) x 2"(51mm)
Ø 5/16" (8mm)
Ø 5
/8"(
16m
m)
5/16"(8mm) x 5/8"(16mm)
Ø 5/16" (8mm)
Provide adequate reinforcement at the vanity's wall and floor attachment points. Install anchor bolts at specified locations.
To maintain prolong beauty of the finish, avoid installing vanity in direct sunlight, as sunlight causes fading.
For the installation of the faucet and metal drain fittings, read the respective installation instructions for those items.
Use the protective sheets to avoid scratches.
!Warning
Floor attachment screwØ 3/16"(4.5mm) x 2"(50mm)
Adjustable spacer
Template
Center of the vanity
Anchor - As neededØ 5/16" (8mm)
Frame
Installation screw
Leg5/16"(8mm) x 5/8"(16mm)