Water Management Software System (WaMSS)

JOHANNESBURGt (011) 435 1080 f (011) 435 1306

enquiries@nz.co.za

CAPE TOWNt (021) 939 9134 f (021) 939 2638 cape@nz.co.za

DURBANt (031) 205 5265 f (031) 205 7913

kzn@nz.co.za

www.nz.co.za

CONTACT US

Isoil Battery Powered Mag Meter with Data Transmission by GPRS

WaMSS Web Based Scada

accessible from anywhere

N&Z’s WaMSS Water Management Software System

is part of an integrated solutions provided by N&Z for AMR (Automatic Meter Reading), Reservoir

Level Management and Water Loss Management for improved efficiency, billing and

service (water) delivery.

MADE IN SA

WaMSS SCADA

DATA COLLECTION AUTOMATIC REPORTINGDate & Time Positive 

TotalizerUnit Negative 

TotalizerUnit Flow 

RateUnit Pressure Unit

2014/06/04  00.30 777305.00 m³ 0.00 m³ 311.90 m³/h 22.63 bar2014/06/04  00.45 777384.00 m³ 0.00 m³ 312.90 m³/h 22.72 bar2014/06/04  01.00 777462.00 m³ 0.00 m³ 313.50 m³/h 22.80 bar2014/06/04  01.15 777540.00 m³ 0.00 m³ 313.80 m³/h 22.78 bar2014/06/04  01.30 777619.00 m³ 0.00 m³ 314.00 m³/h 22.75 bar2014/06/04  01.45 777697.00 m³ 0.00 m³ 313.70 m³/h 22.73 bar2014/06/04  02.00 777776.00 m³ 0.00 m³ 314.00 m³/h 22.73 bar2014/06/04  02.15 777854.00 m³ 0.00 m³ 314.00 m³/h 22.75 bar2014/06/04  02.30 777933.00 m³ 0.00 m³ 315.60 m³/h 22.84 bar2014/06/04  02.45 778012.00 m³ 0.00 m³ 315.40 m³/h 22.93 bar2014/06/04  03.00 778091.00 m³ 0.00 m³ 315.30 m³/h 22.98 bar2014/06/04  03.15 778170.00 m³ 0.00 m³ 315.10 m³/h 22.98 bar MANAGER

REPORTS AUTOMATICALLY EMAILED1

2

6

7

8

9

10

3 4 5

• Meter Reading• Flow Totalisation• Flow Trend• Line Pressure Trend• Reservoir Level Trend• Water Balances• Water Loss Reports• Battery Power• Antenna Power

N&Z’s Water Management System – WaMSS

The WaMSS system consists of two components• The server is web-based.• The User component is via a Gateway which is loaded onto Windows based desk tops, lap tops or tablets. Access is

password protected.

1 Isoil battery powered magnetic flow meter with built-in GPRS data transmission.

2 Smart loggers with built-in GPRS data transmission

3 Pulses from other flow meters.

4 Reservoir or dam level sensors.

5 Line pressure sensors.

6 Data transmission via GPRS on the GSM network.

7 WaMSS Scada System. Web based. Data from field sensors are imported into an SQL database. Reports are automatically compiled and emailed according to user’s schedule.

8 Management has key information at their fingertips and can compile adhoc reports.

9 Users receive regular alarms and reports on a daily basis so that they can take action quickly.

10 The WaMSS can automatically export data to other applications.

Reports and Information Available from WaMSS

1 DASHBOARD REPORT FOR MANAGEMENT OVERSIGHT Dashboard reports consist of the current week’s trends for multiple meters in a single report. It is ideal for management oversight as it enables you to quickly identify situations requiring management attention.

2 TREND REPORTS While WaMSS has been developed for water management it is fully flexible for use in industrial applications where you need to record and display trends of any measurement. The system provides a pre-formatted template for each meter. The template provides for one or two graphs. Up to 4 variables can be displayed on each graph. The graph titles and the variables can be assigned any names or units that you choose.”

3 FLOW TREND REPORTS

Page 3 of 7

REPORTS AND INFORMATION AVAILABLE FROM WaMSS

1. Dashboard Report for Management Oversight: Dashboard reports consist of the current week’s flow trend for multiple meters in a single report. It is ideal for management oversight as it enables you to quickly identify situations requiring management attention.

2. Flow trends

Page 4 of 7

3. Flow totals report:

Page 4 of 7

3. Flow totals report:

Page 4 of 7

3. Flow totals report:

4 FLOW TOTALS REPORT

5 WATER LOSS REPORTS• You create your “zones” simply by selecting “incoming” and “outgoing” flow meters from a dropdown list. • On demand you can view this report at any time. You can select your time window. • You can set up reports to be generated

Page 5 of 7

4. Water Loss Report:

You create your “zones” simply by selecting “incoming” and “outgoing” flow meters from a

dropdown list.

On demand you can view this report at any time. You can select your time window.

You can set up reports to be generated automatically daily, weekly or monthly and e-mail to selected e-mail addresses.

Page 5 of 7

4. Water Loss Report:

You create your “zones” simply by selecting “incoming” and “outgoing” flow meters from a

dropdown list.

On demand you can view this report at any time. You can select your time window.

You can set up reports to be generated automatically daily, weekly or monthly and e-mail to selected e-mail addresses.

Reports and Information Available from Wamss

(L) Unauthorised Use(M) Metering Inaccuracies

(O) Leaks on Services

(A) System Input Volume

(C) Water Losses

(B) Authorised Consumption

(D) Billed Authorised

Consumption

(H) Billed Metered Use

(I) Billed Unmetered Use

(E) Unbilled Authorised

Consumption

(J) Unbilled Metered Use

(Q) Revenue Water - 47%

(R) Non-Revenue Water - 53%(K) Unbilled Unmetered Use

(F) Apparent

(G) Real Losses

(N) Leaks on Transmission and/or distribution mains

(P) Storage Tank Leaks and Overflows 83m²

6 AUTOMATIC WATER BALANCE AS PER THE INTERNATIONAL WATER ASSOCIATION (IWA) MODEL

N&Z’s WaMSS system produces Water Balance Diagrams based on IWA guidelines. Actual metered flows are sent from our battery powered mag meters, or from existing mechanical meters with GPRS or satellite loggers.

The flow measurements are automatically fed into the Water Balance diagrams. All you have to do is a manual entry your estimates of “un-billed, un-metered use”, “leakage on transmission and distribution mains” etc., as a percentage of the System Input or as absolute values.

These diagrams are produced automatically for any time window that you choose and are automatically e-mailed.

Reports and Information Available from Wamss

NO DROP

3

WaMSS Scada – Produces Graphs and Reports for your Water Management

The WaMSS Scada is a simple to use tool in the logging phase, planning phase and implementation. It enables you to continually monitor and trend your performance and automatically compiles reports featuring your key performance parameters.

7 WATER BALANCE TREND The Water Balance above gives you a picture of the situation for the time interval that you select. It’s also

important to visualize how the system performance changes over time. The WaMSS produces a water balance trend on a daily, weekly, monthly or yearly basis where these critical performance indexes are automatically graphed

Reports and Information Available from Wamss

8 RESERVOIR LEVEL MANAGEMENT Reservoir level measurement and management is an essential part of reliable

water delivery to users. The level sensor connects to the Isoil battery powered magnetic flow meter or WaMSlog Smart Logger. The level measurement is sent by GPRS to the WaMSS Scada.

The Scada trends the reservoir level, as well as water In-flow and Out-flow. The reservoirs on the Scada display are grouped by region, or by those which are in alarm, e.g. too full (overflowing) or too empty (too low).

Reservoir Level Trends with in-flow and out-flow trends gives you the information you need to manage and optimise your water delivery to customers.

Page 7 of 7

7. Reservoir Level Management Reservoir level measurement and management is an essential part of reliable water delivery to users The level sensor connects to the Isoil battery powered magnetic flow meter or WaMSlog Smart Logger. The level measurement is sent by GPRS to the WaMSS Scada. The Scada trends the reservoir level, as well as water In-flow and Out-flow. The reservoirs on the Scada display are grouped by region, or by those which are in alarm, e.g. too full (overflowing) or too empty (too low). Reservoir Level Trends with in-flow and out-flow trends gives you the information you need to manage and optimize your water delivery to customers.

8. Data Relay The Data Relay facility provides you with updated data on a regular, specified basis. While the WaMSS produces regular reports or data displays, our Data Relay Function provides you with the data for use it in your other IT systems.

9. Graph of antenna power and battery levels over any selected period:

For further information please contact:

N&Z Instrumentation & Contol (Pty) Ltd Tel: 011 435 1080 Fax: 011 435 1306 Email: enquiries@nz.co.za www.nz.co.za

Scada Datasheet WaMSS Rev 10 22 September 16

Page 7 of 7

7. Reservoir Level Management Reservoir level measurement and management is an essential part of reliable water delivery to users The level sensor connects to the Isoil battery powered magnetic flow meter or WaMSlog Smart Logger. The level measurement is sent by GPRS to the WaMSS Scada. The Scada trends the reservoir level, as well as water In-flow and Out-flow. The reservoirs on the Scada display are grouped by region, or by those which are in alarm, e.g. too full (overflowing) or too empty (too low). Reservoir Level Trends with in-flow and out-flow trends gives you the information you need to manage and optimize your water delivery to customers.

8. Data Relay The Data Relay facility provides you with updated data on a regular, specified basis. While the WaMSS produces regular reports or data displays, our Data Relay Function provides you with the data for use it in your other IT systems.

9. Graph of antenna power and battery levels over any selected period:

For further information please contact:

N&Z Instrumentation & Contol (Pty) Ltd Tel: 011 435 1080 Fax: 011 435 1306 Email: enquiries@nz.co.za www.nz.co.za

Scada Datasheet WaMSS Rev 10 22 September 16

9 DATA RELAY The Data Relay facility provides you with updated data on a regular, specified basis. While the WaMSS

produces regular reports or data displays, our Data Relay Function provides you with the data for use it in your other IT systems.

10 GRAPH OF ANTENNA POWER AND BATTERY LEVELS

Page 7 of 7

7. Reservoir Level Management Reservoir level measurement and management is an essential part of reliable water delivery to users The level sensor connects to the Isoil battery powered magnetic flow meter or WaMSlog Smart Logger. The level measurement is sent by GPRS to the WaMSS Scada. The Scada trends the reservoir level, as well as water In-flow and Out-flow. The reservoirs on the Scada display are grouped by region, or by those which are in alarm, e.g. too full (overflowing) or too empty (too low). Reservoir Level Trends with in-flow and out-flow trends gives you the information you need to manage and optimize your water delivery to customers.

8. Data Relay The Data Relay facility provides you with updated data on a regular, specified basis. While the WaMSS produces regular reports or data displays, our Data Relay Function provides you with the data for use it in your other IT systems.

9. Graph of antenna power and battery levels over any selected period:

For further information please contact:

N&Z Instrumentation & Contol (Pty) Ltd Tel: 011 435 1080 Fax: 011 435 1306 Email: enquiries@nz.co.za www.nz.co.za

Scada Datasheet WaMSS Rev 10 22 September 16

Pressure sensor for water level measurement

JOHANNESBURG

t (011) 435 1080 f (011) 435 1306

enquiries@nz.co.za

CAPE TOWNt (021) 939 9134 f (021) 939 2638 cape@nz.co.za

DURBAN

t (031) 205 5265 f (031) 205 7913

kzn@nz.co.za

www.nz.co.za

CONTACT US