2016 Avigilon. AVIGILON and the AVIGILON logo are trademarks of Avigilon Corporation. .

Access Control Manager 5.6.2 Release Notes

Version 5.6.2 Released, Wednesday April 20, 2016

The upgrade package for ACM 5.6.2 is available at ftp://ftp.avigilon.com/ACM/5.6.2

Files Released Avigilon Access Control Manager Enterprise Appliance File

5.6.2-upgrade

Avigilon Access Control Manager Virtual Files

ACM_VM_5.6.2-disk1.vmdk

ACM_VM_5.6.2.mf

ACM_VM_5.6.2.ovf

Upgrade Path There is no direct upgrade path to ACM 5.6.2 from revisions prior to ACM 5.2.0.

The system must first be upgraded to ACM 5.2.0 and then to 5.6.2.

The upgrade package for ACM 5.2.0 is available at ftp://ftp.avigilon.com/ACM/5.2.0/

The release notes for ACM 5.2.0 is available at

ftp://ftp.avigilon.com/ACM/5.2.0/ACM 5.2.0 Release Notes.pdf

ACM Upgrade Instructions

1. It is not required to use the built in admin account for software upgrade application. ACM

delegations needed to upload, run, and delete software upgrades are: Appliances Listing,

Appliances Edit, Appliance Software Listing, Appliance Software Apply, Appliance Software

New (for adding upgrades) and Appliance Software Delete (for deleting upgrades). Any

login with these delegations in its role(s) can administer and apply software upgrades for a

physical or virtual appliance.

2. The upgrade instructions can be found in Access Control Manager (ACM) help menu

a. After logging in to Access Control Manager, select Help near the top left of the browser

window and search for updating appliance software

Access Control Manager 5.6.2 Release Notes

2016 Avigilon. AVIGILON and the AVIGILON logo are trademarks of Avigilon Corporation. 2 |

ACM with ACC Integration Upgrade Instructions

NOTE: Previous versions (Prior to ACM 5.6.0) of the ACM/ACC integration (Software version

AvigilonAcmIntegrations-5.6.0.28) are not compatible with ACM 5.6.2. Avigilon

recommends upgrading existing ACM/ACC integrations to current versions of ACM and

ACC.

1. Instructions for installing the AvigilonAcmIntegration-5.6.0.28

a. Download AvigilonAcmIntegration-5.6.0.28 from http://avigilon.com/support-and-

downloads/for-software/acc-integration-and-plug-in-downloads/

b. Uninstall previous version of the AvigilonAcmIntegration

c. Reboot the appliance (ACC) that the integration was installed on

d. Once the reboot has completed, proceed to install AvigilonAcmIntegration-5.6.0.28

e. Ensure the Vidproxy service is running

f. Login to the upgraded ACM appliance. Navigate to External Systems page. Select the

Avigilon Integration IP link. Click the Save button to reinitialize the handshake

between ACM and ACC. Wait until the Avigilon Server successfully updated.

Prompt is presented and camera status for each camera shows display of Online.

Verify camera streaming.

ACM with replication Upgrade Instructions

1. For the ACM 5.6.2 upgrade on a replicated system, apply the software upgrade to the

appliance with replication address 1 first, while all other appliances in its replicated

system are online and replicating data amongst themselves successfully.

2. Allow the upgrade on the replication address 1 appliance to complete and the appliance

to reboot and come back online.

3. The remaining appliances in the replicated system are allowed be upgraded in any

order, and should be upgraded as soon as possible once the replication address 1

appliance is upgraded.

New Features

Added support for unlimited number of identity records for LDAP pull collaboration.

Increased identity UDF import limit to 200.

Changes Fixed Issues

Corrected issue with displaying the monitoring saved search criteria.

Corrected issue with identity listings not sorting alphabetically.

Access Control Manager 5.6.2 Release Notes

2016 Avigilon. AVIGILON and the AVIGILON logo are trademarks of Avigilon Corporation. 3 |

Changes Fixed Issues (continued)

Corrected issue with access tab in access groups displaying incorrect data in replicated

systems.

Corrected issue with the inability to select custom event type alarm in the ACC-ACM

alarm gateway.

Corrected issue with the random failure of the events monitor and alarms page where

the grid would be empty and shows message .

Corrected issue with output pulse time in global actions when using HID controllers.

Corrected video pop-up offline server errors when using ACM-Exacq integration.

Corrected localization issue with report filters.

Corrected issue within monitor search displaying incorrect row count.

Corrected naming issue with two reports.

Corrected issue with subpanel output pulse.

Corrected issue with verification monitor not honoring partitions.

Corrected issue with reports not retaining the filter values on job specifications.

Corrected issue when deleting appliance in replicated systems.

Corrected issue when editing areas in replicated systems.

Corrected issue with wrong event being generated on a Mercury EP2500 using lock 0.

Corrected issue with display of unused product licensing field.

Corrected error message when deleting a panels with doors configured.

Corrected occasional issue with rebooting of an appliance.

Corrected issue causing session logout when inactivity timer is set to indefinite.

Corrected issue with identity/doors with access report filters.

Corrected issue with audit log report displaying pin number changes.

Corrected issue with log file for SMTP email configuration.

Corrected issue with report names when using special characters.

Corrected issue with token status when running batch updates.

Corrected issue with incorrect error message when scheduling a Once interval report.

This release addresses the following Common Vulnerabilities and Exposures:

Fix for CVE-2015-5600

Fix for CVE-2013-4508

Fix for CVE-2013-4559

Fix for CVE-2013-4560

Access Control Manager 5.6.2 Release Notes

2016 Avigilon. AVIGILON and the AVIGILON logo are trademarks of Avigilon Corporation. 4 |

Fix for CVE-2015-7547

Fix for CVE-2014-3510

Fix for CVE-2014-3507

Fix for CVE-2014-3506

Fix for CVE-2014-3505

Fix for CVE-2014-3508

Fix for CVE-2014-0224

Fix for CVE-2014-0221

Fix for CVE-2014-0195

Fix for CVE-2014-3470

Fix for CVE-2014-0076

Fix for CVE-2010-5298

Known Issues

Editing very large groups in certain instances may take extended time and is scheduled

to be corrected in a future release.

Error when cameras from different ACC sites are assigned to the same door is

scheduled to be corrected in a future release.

Inability to use reader buzzer with simple macros on HID VertX V100 is scheduled to be

corrected in a service release.

Event and Alarm monitoring stops displaying activity on replicated systems with high

volume of transactions is scheduled to be corrected in a service release.

Error when running delegation report in CSV and PDF is scheduled to be corrected in a

service release.

An error caused when entering a note in the alarm monitor with a verification viewer

opened on the same work station is scheduled to be corrected in a service release.

An error preventing operators from running reports in some partition systems is

scheduled to be corrected in a service release.

An error when updating a role on an identity which has a high items per page limit is

scheduled to be corrected in a service release.

An identities middle name that is not displaying properly in monitoring is scheduled to

be corrected in a service release.

Door names showing up in both the available and member list for access groups is

scheduled to be corrected in a service release.

The incorrect display of event time format for event reports is scheduled to be

corrected in a service release.

Access Control Manager 5.6.2 Release Notes

2016 Avigilon. AVIGILON and the AVIGILON logo are trademarks of Avigilon Corporation. 5 |

Known issues (Continued)

Card expiration delays when using certain time zones is scheduled to be corrected in a

service release.

Incorrect date display format on a badge for certain locals in system settings is

scheduled to be corrected in a service release.

Missing events for PIM400 doors are scheduled to be added in a service release.

Firmware Included Panel Firmware:

rcp-update-1.6.2.0

EP1501-VER-1-20-7.crc

EP1501-VER-1-21-2.crc

EP1502-VER-1-20-7.crc

EP1502-VER-1-21-2.crc

EP2500-VER-1-20-7.crc

EP2500-VER-1-21-2.crc

M5IC-VER-1-19-4.crc

M5IC-VER-1-20-7.crc

Scp2-AES-VER-3-120.crc

Scp2-VER-3-120.crc

ScpC-AES-VER-3-120.crc

ScpC-VER-3-120.crc

ScpE-AES-VER-3-120.crc

ScpE-VER-3-120.crc

Firmware Included Sub-panel Firmware:

M5-16DO-APPL-VER-1-32-2.aax

M5-20IN-APPL-VER-1-32-2.aax

M5-2K-APPL-VER-1-56-13.aax

M5-2K-APPL-VER-1-56-15.aax

M5-2RP-APPL-VER-1-57-2.aax

Access Control Manager 5.6.2 Release Notes

2016 Avigilon. AVIGILON and the AVIGILON logo are trademarks of Avigilon Corporation. 6 |

Firmware Included (continued) Sub-panel Firmware:

M5-2RP-APPL-VER-1-57-3.aax

M5-2SRP-APPL-VER-1-57-2.aax

M5-2SRP-APPL-VER-1-57-3.aax

M5-8RP-APPL-VER-1-57-3.aax

M5-8RP-APPL-VER-1-57-5.aax

MR16in-APPL-VER-1-31-1.aax

MR16in-APPL-VER-1-32-1.aax

MR16out-APPL-VER-1-31-1.aax

MR16out-APPL-VER-1-32-1.aax

MR50-APPL-VER-1-51-0.aax

MR50-APPL-VER-1-52-14.aax

MR51e-APPL-VER-1-4-8.aax

MR51e-APPL-VER-1-5-12.aax

MR52-APPL-VER-1-51-0.aax

MR52-APPL-VER-1-57-5.aax

MR52-SERIES1-VER-1-11.aax