ammoland daily gun news sept 20th 2010
DESCRIPTION
business, how they got started and what the future might hold for collectors. www.ima-usa.cm Owning a piece of history that is actually a machine-gun requires a lot of special paperwork and hassle. The alternative is to get a historic item that doesn’t actually fire. While that might seem like half the fun is missing, think of half the fun you get for having a fantastic display item – one that is generally legal to own and still looks quite impressive. AMMOLAND.COM FirearmsTruth.com 1TRANSCRIPT
21 September 2010
Today’s TabbloidPERSONAL NEWS FOR [email protected]
1
AMMOLAND.COM
International Military AntiquesOffers an Alternative forMachinegun CollectorsSEP 21, 2010 09:18A.M.
International Military Antiques (IMA) Offers an Alternative
for Machinegun Collectors
Schwarzlose Water Cooled Machine Gun
FirearmsTruth.com
Michigan --(Ammoland.com)- Owning a piece of history is something
special.
Owning a piece of history that is actually a machine-gun requires a lot of
special paperwork and hassle.
The alternative is to get a historic item that doesn’t actually fire. While
that might seem like half the fun is missing, think of half the fun you get
for having a fantastic display item – one that is generally legal to own
and still looks quite impressive.
International Military Antiques (IMA) is one of the premier sellers of
such historical items, as well as other unique oddities and collectibles.
We talked to owners Christian and Alexander Cranmer about their
business, how they got started and what the future might hold for
collectors. www.ima-usa.cm
International Military Antiques
FirearmsTruth: How did your company get started in the business of
selling display machine guns?
Christian Cranmer: IMA started in 1981 as the U.S. retail selling arm
of our British wholesale company, Fire-Power International Ltd which
was founded in 1967. FPI purchased military surplus from third world
governments and sold to European Dealers initially mostly Germany.
Most of the materials, at this early stage, were rifles and handguns with
some militaria (bayonets, swords and accouterments), but a few years
later Machine Guns were added to the menu principally because the
selling governments wanted to include them in their sale offers. Initially,
IMA dealt only in the Militaria side, not adding the Firearm parts until
1990. U.S. Federal Law prevented the importation of receivers (to use an
auto analogy; the “engine block” of the MG) so we broke the weapons
into parts for importation leaving the “engine block” in back at FPI in
England. Supply was initially strong but sales of these spare parts for
existing weapons soon were satisfied so another avenue needed to be
found to move this material.
This led to the development of the “Dummy Gun,” which is essentially a
look-alike display inert weapon but constructed with mostly original
parts. The original parts are then fitted onto a solid aluminum inert
receiver which makes a fantastic display but is totally inert and harmless.
FirearmsTruth: There have been many parts kits on the market, but
how do you ensure that what you’re selling won’t get your customers in
trouble:
Alexander Cranmer: IMA continually created new models and
submitted them to the BATF Technical Branch for evaluation and
*123456* Lineitem #123456, tabblo #1, page 1 (1 of 19), generated 2010-09-21 02:14:26.445859 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
2
approval. At that time, the head of tech services would issue a letter
confirming that a weapon rebuilt in the way our sample was presented
was “NO LONGER DEEMED A FIREARM” thereby permitting open sale.
We submitted dozens of weapon systems for which we each got a letter
and is still the basis for not only our Display Gun sales, but the majority
of the US Dummy Gun Market.
FirearmsTruth: To be clear, can you describe exactly what is a display
machine gun?
Alexander Cranmer: A vintage display machine gun is like a Model T
Ford that has a solid engine block, they both look the part but neither
will ever run. The reason a display machine gun looks “the business” is
because it is constructed from original serviceable parts. However, what
makes it a display as opposed to an operational gun is that we replace the
most crucial part, the receiver (or engine block), with a new made
aluminum receiver or an original de-militarized (“demilled”) receiver.
A demilled receiver has been flame cut into multiple pieces (according to
BATF guidelines). We then re-weld this cut receiver into a “lump”. We
call it a lump because there is no internal space for any parts whatsoever,
rendering it completely inert and only useful for display. It should also
be noted that when a receiver is cut in multiple locations some original
steel is lost. This means that when the receivers are “lumped” they are
generally slightly shorter. This additional step makes it virtually
impossible to engineer our lump receivers to working condition. Today,
due to recent import laws, even the barrels have been destroyed or
replaced with an inert rod or tube. In short, it would far be easier to build
a MG from scratch than to attempt to reactivate one of our Display
Machine Guns. Hypothesize for a moment that it was possible to convert
a display machine gun to working condition, well, anyone with the
required skills, tools and materials would be able to make a far more
lethal machine gun in a fraction of the time for a faction of the cost. Lets
go back to the automobile analogy, if you had the skills to build a race
car, would you build a 2010 Ferrari or a 1920 Model T Ford?
FirearmsTruth: What have been some of the most popular and
desirable items?
Alexander Cranmer: German WW2 Machine Guns of the Nazi era are
the best sellers, followed by U.S. and British. In 1996 we offered German
MP 44 Parts Sets for $395 and “Display MP 44s” at $495. Today an MP
44 Display Gun easily brings $3,500. Similarly MP 40 parts sets were
sold by IMA in 1993 at $325, today the going price for an MP 40 parts set
price is well over $ 2,000. We have a saying that there are Nazi
Collectors and there are Collectors of everything else. It is probably a
sense of “dancing with the Devil” as, ironically, some of the biggest Nazi
memorabilia collectors in the world are Jewish. Also, to be fair, the
Germans are and were master engineers. The majority of the German
WWII guns & equipment are simply superior in design and quality than
comparable allied items.
FirearmsTruth: For a long time it wasn’t even legal to own a non-
firing machine gun in many states, but with a few exceptions these are
generally legal today. Do you think the laws controlling the firing guns
make these display weapons so popular?
Alexander Cranmer: Different States and municipalities have
different regulations but, in general, the reason for non-gun or Display
Guns popularity is that legal ownership of a working machine gun,
although possible in some States (not all), requires so many security
measures and responsibilities that an Display Inert Original item without
complications seems highly preferable in comparison. Also, the
availability of registered fully automatic machine guns is very limited
and or owning and transporting a converted semi- auto MG gun drives
up the cost significantly, meaning its far more affordable, easier, and
safer to purchase a display inert machine gun.
FirearmsTruth: Since 2005 there has been a ban on the importation of
parts kits to the United States. Does this mean there is only so much
more stuff out there?
Alexander Cranmer: Actually, there is not a current ban on Machine
Guns Parts Sets, however the 2005 regulation you refer to concerns
barrels. When the Justice Department took over the BATF from Treasury
their lawyers reviewed all existing Laws and decided that the clause in
the 1968 Gun Control Act denying importation for “short” Revolver
Barrels for Saturday Night Specials could also be interpreted to include
Machine Gun barrels. It is not what the Law says, or is intended to say,
but it is the current interpretation of the present Justice Department and
Administration. There are currently moves to have this struck down in
court, we are told, but from IMA’s point of view we have no problem
constructing a Display Machine Gun using a demilitarized or deactivated
barrels in an inert display item.
Additionally, the Government is using various other Laws to impose
import bans on Chinese and ex Soviet Weapons and even American
Returned Goods that was introduced in the 1950s to prevent handguns
made by Smith & Wesson and Colt for example, that had been supplied
to U.S. Allies at no cost (Lend/Lease Program) being re-imported to
compete with those manufacturers in the post war domestic market. It is
now 65 years since WWII ended and this Law prevents one importing a
WWI Springfield bolt Action Rifle made in 1903, over 100 years old, a
rifle possibly carried by our Grand Fathers or even Great Grand Fathers.
This appears to be utter madness and is a slap in the face of every
Veteran who has ever served his country. This particular rifle even
predates the Model T Ford!
FirearmsTruth: Will demand eventually tap out the supply?
For IMA, and most WWII collectors, the end of an era is in sight. Even
the Third World is now almost empty of the desirable WW1 and WW2
materials which have become so popular in the last 20 years probably
because of films like Saving Private Ryan and Band of Brothers. Today
the Government offerings, such as they are, consist of weapons made in
the 1960s/1970s and 1980s, which have little romantic association. The
vast majority of military surplus now is automatically destroyed,
regardless of value, in accordance with various United Nations
directives. The bright side is that this means that every vintage military
antique in anyone’s collection goes up in value every day.
Peter Suciu is executive editor of FirearmsTruth.com, a
website that tracks and monitors media bias against guns
and our Second Amendment rights. Visit:
*123456* Lineitem #123456, tabblo #1, page 2 (2 of 19), generated 2010-09-21 02:14:26.477536 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
3
FirearmsTruth.com
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
International Military Antiques Offers an Alternative for Machinegun
Collectors
Tags: Antique Guns, FirearmsTruth.com, Gun Collections, Gun
Collectors, IMA, International Military Antiques, Peter Suciu
AMMOLAND.COM
Hunters, Be Prepared for BearsSEP 20, 2010 07:58P.M.
Hunters, Be Prepared for Bears
Montana Fish, Wildlife and Parks
MALTA, Mont. --(Ammoland.com)- With upland bird, archery and
backcountry rifle seasons underway, hunters should be prepared for
what to do in case of a bear encounter.
“This is the time of year when bears are in a constant search
for food before winter, and hunters should be extra careful,
particularly in areas with dense cover where you can surprise
a bear at close range,” said James Jonkel, Montana Fish,
Wildlife & Parks Region 2 Bear Management Specialist.
Hunting is a prime time to encounter a bear.
Hunters should follow these tips in bear country:
• Always carry bear spray, have it close at hand and know how to use
it.
• Hunt with a partner or let someone know your plans and
periodically check in.
• When field dressing the carcass, keep your can of bear spray within
easy reach.
• Get harvested game out of the woods quickly.
• Carry a lightweight tarp or space blanket to put the entails on and
pull them well away from the carcass and then cover the carcass
with the tarp to reduce the scent, if the carcass is left unattended.
• When returning to a site where harvested game is left unattended,
study the site at a distance for any movement or changes and signal
your approach by making plenty of noise.
• Do not attempt to frighten or haze a bear from a carcass.
If a bear finds a carcass unattended and is eating it or has covered it with
debris and it is not salvageable, contact FWP.
For more on black bears, got to the FWP website at fwp.mt.gov on the
Wild Things page and click on Living With Wildlife.
A “How to Hunt Safely in Grizzly Country” brochure is also available at
FWP regional offices.
Montana 2010 Black Bear Regulations
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Hunters, Be Prepared for Bears
Tags: Bear Hunting, Bear Management, Black Bears, Grizzly Bears,
MFWP, Montana, Montana Department of Fish And Game
*123456* Lineitem #123456, tabblo #1, page 3 (3 of 19), generated 2010-09-21 02:14:26.507376 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
4
AMMOLAND.COM
Multiple Grizzlies, Black BearsCaptured & Moved in WesternMontanaSEP 20, 2010 07:37P.M.
Multiple Grizzlies, Black Bears Captured and Moved in
Western Montana
Montana Fish, Wildlife and Parks
MALTA, Mont. --(Ammoland.com)- Montana Fish, Wildlife & Parks
(FWP) biologists and field assistants captured and moved three grizzly
bears and multiple black bears in western Montana’s Region 2 this
month.
On September 11, FWP captured an adult male grizzly bear in the
Woodworth Road area south of Seeley Lake. This bear was habituated to
visiting residential areas and had become too comfortable grazing and
spending time in close proximity to children and others. The grizzly was
taken to a research facility at Washington State University in Pullman,
WA.
Another female grizzly bear and her cub were captured on September 14
north of Seeley Lake. These bears were routinely searching out chicken
feed as well as visiting porches and entering buildings looking for
garbage, birdseed and grain. Because they were conditioned to unnatural
food sources, these grizzlies could not be released back into the wild and
were transported to the Tulsa, Oklahoma Zoo.
Since the first of September, FWP staff has also trapped four black bears
in the Missoula area and many additional bears in other western
Montana communities. FWP relocated three of the bears captured in
Missoula to remote mountain areas around western Montana and took
one cub to the FWP animal rehabilitation center in Helena to be held
until it can be released in the spring.
In addition, a sub-adult male grizzly and two other grizzly bear cubs were
killed along the highways in the Blackfoot-Clearwater drainage in August
and September, and FWP continues to receive reports of other grizzlies
and black bears crossing roads and neighborhoods across western
Montana.
“The conflicts have increased dramatically over the past few
weeks,” FWP Region 2 Bear Management Specialist, James
Jonkel said. “Bears are in a period of intense eating before the
winter season and they’re coming down into the valleys near
communities and roadways looking for natural food, but they
sometimes find easier sources like garbage and chicken coops
along the way.”
When bears show up looking for food and receive food rewards in the
form of pet and livestock food, bird feeders, and garbage left outdoors,
they become conditioned and continue to return to those same areas.
Jonkel said that these bears tend to become bolder and more aggressive
towards humans, and often there is no alternative but to relocate or
euthanize the offender.
FWP is currently working to trap a few bears in Missoula’s Rattlesnake
neighborhood that are food conditioned and chronically getting into
unnatural food sources. Jonkel says that neighborhood residents should
be commended for their work in keeping attractants contained but that
they need to stay diligent through the fall.
“The best solution is prevention,” Jonkel said. “As a property
owner, the most important thing to remember is to minimize
bear attractants.”
Specifically, Jonkel reminds residents to keep garbage stored inside stout
buildings or in a bear-resistant container until the day of collection, take
down bird feeders until December and make sure chickens and feed are
in a secure building or surrounded by an electric fence.
Fruit trees are also a major bear attractant right now, and homeowners
should harvest fruit as soon as it ripens.
“We strongly urge residents to keep all garbage and other
attractants secured until the snow flies,” Jonkel said.
Contact FWP at 406-542-5500 to learn more about how to minimize
backyard bear attractants and what bear deterrent systems, such as bear-
resistant garbage cans or electric fence kits, may be needed to keep
attractants off-limits.
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Multiple Grizzlies, Black Bears Captured & Moved in Western Montana
Tags: Bear Hunting, Bear Management, Black Bears, Grizzly Bears,
MFWP, Montana, Montana Department of Fish And Game
*123456* Lineitem #123456, tabblo #1, page 4 (4 of 19), generated 2010-09-21 02:14:26.569065 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
5
AMMOLAND.COM
Leupold, Remington ContinueM-24 Sniper Rifle PartnershipWith New UpgradeSEP 20, 2010 06:29P.M.
Leupold, Remington Continue M-24 Sniper Rifle Partnership
With New Upgrade
Leupold Debuts Mark 4 6.5-20x50mm Extended Range/Tactical (ER/T)
M5 Locking Adjustment Riflescope.
Remington M24 Sniper Rifle with Leupold ERT Scope
Leupold Tactical Optics
BEAVERTON, Ore. --(Ammoland.com)- Remington’s latest upgrade
of its Sniper Weapon System for the U.S. Army, the M-24E1, includes a
new Leupold Mark 4 6.5-20x50mm Extended Range/Tactical (ER/T) M5
Locking Adjustment riflescope.
Specially designed and built with the military sniper in mind, the scope
has an auto-locking elevation adjustment. This feature ensures rock-
solid reticle adjustment is maintained during rough going and stressful
conditions on the battlefield.
“This new scope incorporates all of the features our
warfighters have been asking for,” said Kevin Trepa,
Leupold’s vice president of tactical sales and marketing. “We
are working hard to design, manufacture and deliver the tools
they need to get the job done.”
Leupold President and CEO Calvin Johnston added, “We are
excited that our newest riflescope is part of Remington’s
upgraded M-24E1 Sniper Weapon System. Leupold will
continue to leverage its Oregon-based workforce to provide
the military with superior products built to their
specifications.”
Other key features of the new ER/T include M5 windage and elevation
adjustment dials with audible, tactile 1/10 (0.1) milliradian clicks to
match the range-estimating, mil-based Horus reticle options. This allows
fast, intuitive shot correction in the field. An elevation zero-stop helps
prevent under-rotation in high-stress situations.
With the battle-proven Horus H27 or H58 reticle in the front focal plane,
the scope offers the versatility of a variable magnification optic and the
ability to accurately range at all magnification settings (the reticle
magnifies with the image).
Leupold’s Xtended Twilight Lens System delivers an exceptionally clear,
bright sight picture for outstanding target discrimination at all powers
and in a wide range of lighting and environmental conditions. A lockable
fast-focus eyepiece makes reticle focus simple to achieve and maintain. It
also enables long eye relief to provide the shooter with nearly instant
target acquisition.
Other key features include side focus parallax adjustment for fast, easy
parallax focusing from 75 yards to infinity, from any shooting position.
The 34mm maintube provides exceptional strength and allows for
maximum windage and elevation adjustment.
The Mark 4 6.5-20x50mm ER/T M5 Locking Adjustment riflescope is
waterproof, fog proof and shock proof. Exhaustive testing in the factory
and field ensures durability. With its M5 Locking Adjustment, the
scope’s platform is unique in the Mark 4 ER/T line. It is controlled under
International Traffic in Arms Regulations (ITAR) and limited to
domestic and international government sales only.
Leupold has offered precision optics for tactical applications since the
1983 introduction of Ultra riflescopes, which were designed to excel
under the most extreme battlefield conditions. Today, more Leupold
long-range optics are in service with the U.S. military than any other
brand. For more information on Leupold tactical optics, go to
www.leupold.com.
Leupold & Stevens, Inc., the preeminent American-owned and -operated
optics company, employs more than 600 people in its state-of-the-art
facility near Beaverton, Ore., where rugged, dependable, high-
performance Mark 4 and Golden Ring optics are designed, machined and
assembled. Leupold is a fifth-generation, family-owned company whose
products are sold worldwide to military warfighters, law enforcement
personnel, hunters, competitive shooters and wildlife observers. The
product line includes rifle, handgun and spotting scopes; binoculars;
rangefinders; flashlights; mounting systems; and optical tools and
accessories.
Leupold & Stevens, Inc. is a Charter Supporter of the Hunting
and Shooting Sports Heritage Foundation.
*123456* Lineitem #123456, tabblo #1, page 5 (5 of 19), generated 2010-09-21 02:14:26.713580 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
6
Leupold & Stevens, Inc., P.O. Box 688 Beaverton, OR 97075-0688 U.S.A.
(800) LEUPOLD or (503) 526-1400 Fax: (503) 352-7621
www.leupold.com
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Leupold, Remington Continue M-24 Sniper Rifle Partnership With New
Upgrade
Tags: High Power Rifles, Leupold, Military Contracts, Military Snipers,
Remington Arms Company, Sniper Rifles, US Army
AMMOLAND.COM
US Army Awards RemingtonArms a Contract to ReconfigureM24 Sniper Weapon SystemsSEP 20, 2010 06:13P.M.
US Army Awards Remington Arms a Contract to Reconfigure
M24 Sniper Weapon Systems
US Army Awards Remington Arms a Contract to Reconfigure M24
Sniper Weapon Systems
Remington Arms Company
Madison, NC --(Ammoland.com)- Remington Arms Company, Inc.
(“Remington”), a member of the Freedom Group of Companies, is
pleased to announce that the United States Army’s Joint Munitions and
Lethality Contracting Center has awarded Remington a Firm Fixed Price
(FFP) Indefinite Delivery/ Indefinite Quantity (ID/IQ) contract
(W15QKN-10-R-0403) for the upgrade of up to 3,600 M24 Sniper
Weapon Systems (SWS) currently fielded to the Army pending type
classification as the “M24E1”.
The major configuration change for this system is the caliber conversion
from 7.62mm NATO (.308 Winchester) to .300 Winchester Magnum to
provide soldier’s with additional precision engagement capability and
range.
The contract is for a five (5) year period and has guaranteed minimum
value of $192K with a potential value of up to $28.2 million.
This award follows a full and open competitive evaluation lasting 9
months, which began with the release of the Army’s Request for Proposal
(RFP) on 13 January 2010.
The program will be executed under the authority of Project Manager
Soldier Weapons, Picatinny Arsenal, NJ, and managed by its subordinate
unit, Product Manager Individual Weapons
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
US Army Awards Remington Arms a Contract to Reconfigure M24
Sniper Weapon Systems
Tags: High Power Rifles, Military Contracts, Military Snipers,
Remington Arms Company, Sniper Rifles, US Army
AMMOLAND.COM
Montana Landowners &Hunters Asked to Report Deador Dying DeerSEP 20, 2010 06:02P.M.
Montana Landowners & Hunters Asked to Report Sightings of
Dead or Dying Deer
*123456* Lineitem #123456, tabblo #1, page 6 (6 of 19), generated 2010-09-21 02:14:26.842115 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
7
Epizootic Hemorrhagic Disease in Deer
Montana Fish, Wildlife and Parks
GLASGOW, Mont. –-(Ammoland.com)- Scattered reports of white-
tailed deer being found dead in recent weeks in parts of Montana
Department of Fish, Wildlife & Parks Region 6 have prompted state
biologists to enlist the help of landowners and hunters.
“Folks who are out in the field and notice deer that have
recently died from unknown causes are asked to call our
office in Glasgow at (406) 228-3700 to report the number of
animals and the exact location,” said Region 6 Wildlife
Program Manager Mark Sullivan.
“We’ve been awaiting the results of testing on several deer
that have recently been found to determine whether they’ve
died from epizootic hemorrhagic disease (EHD) or some
other traceable cause,” Sullivan said.
“We just learned that a sample from one of the deer tested
positive for EHD. There doesn’t appear to be reason for
alarm, but we are seeing a few deer dying rather suspiciously.
With help from the public, we hope to determine the extent of
the incidents. It may not be widespread at all.”
EHD is an acute, infectious, often-fatal viral disease of some wild
ruminants, especially white-tailed deer. The disease, characterized by
extensive hemorrhaging, fever, and a resultant urge to be near or even
immersed in temperature-controlling fresh water, has been responsible
for significant die-offs over the years in the northern United States and
southern Canada.
A similar hemorrhagic disease commonly called bluetongue also occurs
throughout the U.S. and Canada, but the two diseases are clinically
different. Both diseases can affect mule deer and pronghorn antelope,
but not as commonly as white-tailed deer.
Outbreaks of EHD and bluetongue most commonly occur during the
summer and early fall, and animals typically develop signs of EHD about
a week after exposure. Along with dead deer, landowners and hunters
are asked to watch for deer that have lost their fear of humans, may be
weak and salivating excessively or are semiconscious.
In cases of bluetongue, hemorrhaging and lack of oxygen in the blood
may result in blue coloration in the animal’s mouth. Overall, the
hemorrhages from these diseases range widely in size and involve a
variety of different tissues and organs. Infected animals usually die
within 36 hours of showing symptoms.
At this point there is no known treatment or control of these diseases,
which researchers say have not been found to affect humans. EHD is
spread by tiny biting flies, so a hard frost that kills these insects ends the
spread of any ongoing outbreaks.
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Montana Landowners & Hunters Asked to Report Dead or Dying Deer
Tags: Deer Hunters, Montana, Montana Department of Fish And Game,
Whitetails
*123456* Lineitem #123456, tabblo #1, page 7 (7 of 19), generated 2010-09-21 02:14:26.915149 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
8
AMMOLAND.COM
Team Sinclair’s Jeffery RorerWins Big At Canadian FullboreChampionshipsSEP 20, 2010 05:44P.M.
Team Sinclair’s Jeffery Rorer Wins Big At Canadian Fullbore
Championships
Sinclair Ammunition Reloading Supplies
Montezuma, Iowa --(Ammoland.com)- Team Sinclair’s Jeffrey Rorer
dominated the field over nine days of competition to win the MacDonald
Stewart Grand Aggregate in the F-Class TR (Target Rifle) category at the
128th Canadian Fullbore Championships held at the Connaught Rifle
Range outside of Ottawa, Ontario.
The win earned Rorer the title of Canadian Fullbore F-Class TR
Champion for 2010.
In F-TR competition Rorer also won the Farquharson Trophy in a
runaway as his nearest competitor fell 21 points off the pace.
The prestigious Governor General’s prize came down to the wire for the
hard-holding Rorer as the other F-Class TR shooters matched him shot
for shot, cleaning most stages handily at various ranges out to 900
meters.
In the end, Rorer nabbed that prize, too, despite dropping six points in
the 900-meter stage as the wind let off sharply. However, his nearest
competitor, Matt Wolf, also dropped six points and finished three points
back. Rorer won a total of 18 matches and aggregates over the nine days.
Rorer also helped Team USA win the F-Class team match.
Team Sinclair’s Jeffery Rorer
The 36-year-old North Carolina native has been a member of Team
Sinclair for one year. His rifle was built on a Kelbly Panda action and
trigger with a Broughton Palma barrel chambered for .308 Winchester.
This combination is bedded into a McMillan prone rifle stock and has a
Center Shot bipod. It is topped with a Nightforce 12-42 NXS scope with
NP-R1 reticle.
Rorer’s handloads use Lapua brass, Berger 185-gr. BT bullets and Varget
powder. “My charge of Varget depends on the lot number, but I use
enough to get 2,800 fps,” he said. “I’ve had to vary my powder charge
about one grain over the years.” Rorer uses Redding, RCBS and Sinclair
dies and tools to obtain precision match ammo.
About:
Sinclair International is the world’s premier supplier of high-quality
reloading tools, components and accessories plus unique target shooting
and hunting supplies. Stocking more than 10,000 items, the company
supplies reloaders, shooters and hunters worldwide. To order, or for
more information, call 800-717-8211 or visit sinclairintl.com and
mention code PGK.
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Team Sinclair’s Jeffery Rorer Wins Big At Canadian Fullbore
Championships
Tags: Competition Shooters, Competitive Shooting News, Shooting
Teams, Sinclair, Sinclair International, Target Shooting, Winners
*123456* Lineitem #123456, tabblo #1, page 8 (8 of 19), generated 2010-09-21 02:14:27.041304 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
9
AMMOLAND.COM
Take Aim at Montrose, Colo.,for a Memorable Fall HuntingGetawaySEP 20, 2010 05:32P.M.
Take Aim at Montrose, Colo., for a Memorable Fall Hunting
Getaway
Named one of the best towns for outdoorsmen, Montrose boasts more
than a dozen outfitters.
Montrose, Colo., Memorable Fall Hunting Getaway
Colorado Division of Wildlife
Montrose, Colo. --(Ammoland.com)- Montrose, Colo., is an outdoor
lover’s paradise. So much so that recently, the city was named to
Outdoor Life magazine’s annual list of the 200 best towns in America for
outdoorsmen.
The options for sportsmen are as vast as the Colorado backcountry is big.
Montrose, with its 62,000 acres of BLM-managed lands, boasts elk, deer,
antelope, mountain lions, sheep, waterfowl, rabbits, and even a drawing
for moose season.
Montrose has more than a dozen outfitters standing by to take hunters to
some of the favorite local hot spots. Whether new to the sport or loking
to sharpen their skills, one of these knowledgeable outfitters can help
keep hunters on target.
There are many different trip types available; guided trips
start at about $3,000.
• Action Adventures (www.actionadventures.net) – Specializing in
wilderness horseback pack-in elk hunts, Action Adventures also
offers private land elk and mule deer hunts.
• Camp David Outfitting (www.campdavidoutfitting.com) – This
group offers exclusive private land hunts for elk and mule deer on
the beautiful Uncompahgre Plateau. Guided Hunts include lodging,
meals, transportation while hunting, and packing out the animals.
• Conrad’s High Country Outfitters (www.conradsoutfitters.com) –
Archery hunting for big bulls in the Colorado backcountry has been
this outfitter’s specialty for 30 years, though they also cater to
muzzleloader and rifle hunters. In addition to elk and mule deer,
Conrad’s also offers hunts for antelope, black bear and Merriam
turkeys.
• Dark Timber Outfitting (www.darktimberlodge.com) – Dark
Timber Lodge is nestled on National Forest and BLM land in
acclaimed units 61 and 62, offering 50,000 acres of hunting ground
on each unit. Sportsmen enter the hunting area on ATVs and then
go by foot.
• Hyatt Guides and Outfitters
(www.elwing.com/hunting/hyattinfo.html) – Offering guided hunt
packages, one-on-one guided and self-guided hunts, Bruce Hyatt
specializes in elk and deer hunting with bow and arrow and rifle.
• J & Ray (www.sportsmansdream.com/jray/) – This third-
generation, family owned and operated outfitter has been in the
Colorado outfitting business since 1969. J & Ray hunts elk and deer
in unit 65 in the Uncompahgre Wilderness Area.
• Kinikin Outfitters (www.huntwesterncolorado.com) – Kinikin
Outfitters has exclusive hunting rights to more than 20,000 acres
of private ranchland and specialize in memorable elk and mule
deer hunts in units 62, 64, 65 and 70.
• Silverspur Outfitters (http:/www.huntsilverspuroutfitters.com) –
Personal service is the hallmark of this family-owned business.
Hunts are all on private land that borders BLM and National
Forest.
• Soap Mesa Outfitters (www.southwestcoloradoelkhunting.com) –
Soap Mesa Outfitters offers quality guided elk and mule deer hunts
on its 3,500-acre property overlooking Blue Mesa Reservoir, the
Black Canyon of the Gunnison, Soap Creek and the Gunnison
National Forest, as well as 6,000 acres of West Elk National Forest.
*123456* Lineitem #123456, tabblo #1, page 9 (9 of 19), generated 2010-09-21 02:14:27.181000 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
10
• Western Colorado Outfitters (www.westerncoloradooutfitters.com)
– Western Colorado Outfitters has been providing quality hunts in
Colorado since 1976. This group offers guided elk, mule deer and
black bear hunts on a forest permit area that they have been
hunting for more than 30 years.
For information on hunting seasons, draws, tags and other regulations,
contact the local Colorado Division of Wildlife office at 970-252-6000.
About Montrose (www.visitmontrose.com)
Montrose is a uniquely-authentic town that has carved out a place for
itself in the landscape and culture of Colorado. Montrose was recently
named to Outdoor Life magazine’s annual list of the 200 best towns in
America for outdoorsmen. Seventy-three percent of the land
surrounding the city is public land, making Montrose a Mecca for all
kinds of outdoor activities, including: hunting, fishing, camping, hiking,
road biking, and mountain biking. A multi-faceted community, Montrose
serves up layer upon layer of discoveries, each more unique than the last.
Whether visitors are looking for adventure, agritourism, history, culture,
shopping, fine dining or anything in between, Montrose has a little
something for everyone.
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Take Aim at Montrose, Colo., for a Memorable Fall Hunting Getaway
Tags: Colorado, Colorado Division of Wildlife, Hunting Trips, Outfitters
AMMOLAND.COM
SunBuster’s Bruce PiattFinishes in the Money at 3-GunNation ChampionshipSEP 20, 2010 04:19P.M.
SunBuster’s Bruce Piatt Finishes in the Money at 3-Gun Nation
Championship
SunBuster’s Bruce Piatt Finishes in the Money at 3-Gun Nation
Championship
SunBuster
FARMINGDALE, NY --(Ammoland.com)- World Champion
Professional shooter, Bruce Piatt arrived at the Desert Sportsman’s Rifle
and Pistol Club in Las Vegas to battle it out amongst the country’s best
shooting competitors and finished second in the inaugural FNH 3-Gun
Nation Championship.
Competitors accumulated points over the past year in five qualifying
titled events held throughout the United States leading to the year end
finale.
The fast paced Man on Man shoot off consisted of two shooters
simultaneously burning through six 8” steel plates at a 100 yards with a
rifle, then picking up a shotgun to swing through five steel targets
bordered by two clay birds and ending it with a pistol aimed at a six 8”
steel plate rack. The winner was determined by who knocked down the
overlapping plates first. While it was not a timed shoot off, the
adrenaline level of the shooters was at its peak as they ran and handled
all three firearms safely while combining speed and accuracy.
Piatt commented, “I’ve been competing in 3 Gun matches
since they were created. To see this sport evolve, by pulling in
shooters from other disciplines, it draws in more talent and
new faces which can only augment the sport. Who wouldn’t
want to chase down a $25,000 check? 3-Gun events are all
about the fun factor, speed and providing challenging targets
*123456* Lineitem #123456, tabblo #1, page 10 (10 of 19), generated 2010-09-21 02:14:27.357414 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
11
for all levels of competitors.”
“Shooting in the hot and bright sunny desert climate, can
present a host of challenges for shooters trying to accurately
see their targets downrange. When I was ready to compete, I
wore my SunBuster® Clear lens and then switched out to my
SunShooter Gray lens to rest my eyes afterwards. As I travel
throughout the country, shooting at different times of day or
amongst varied terrain, it’s the flexibility of the various
SunBuster lenses that gives me winning results, said Piatt.”
SunBuster’s president Steve Asman said, “Bruce continues to
dominate the shooting sports while driving it to the next
level. We’re thrilled to be a part of Bruce’s winning results
and success by providing him with quality equipment he can
consistently count on.”
SunBuster has designed The Maverick™ and The Dude™, two
lightweight frames specifically designed for the shooter. Both models
provide a comfortable fit for all-day wearing. Each model includes an
interchangeable lens system of five lenses scientifically created to
enhance and maximize the shooter’s ability to perform under different
lighting and target presentations in competitive shooting. The first lens
system is the Pistol/Indoor system and the second is the
Shooting/Hunting system. Each system offers a patented, lightweight,
rimless insert, which sits behind the lens, available in a wide range of
prescriptions. Additional custom colored lenses are available to add to
either of the systems for enhanced levels of shooting.
To see why others are making the switch to SunBuster’s
SportEnhancementEyewear (S.E.E.) contact: 866- 786-2878 or E-mail:
[email protected]. Web site: www.sunbuster.info. Media
members interested in field-testing any of the SunBuster products for
editorial review should contact Lisa G. Cinquino of Whistle
Communications at [email protected], or call (203) 881-8381.
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
SunBuster’s Bruce Piatt Finishes in the Money at 3-Gun Nation
Championship
Tags: Competition Shooters, Competitive Shooting News, Sponsorships,
Sunbusters, Three Gun Competitions, Winners
AMMOLAND.COM
Takedown Briefcase AR15 Rifle :UpdateSEP 20, 2010 03:17P.M.
Takedown Briefcase AR15 Rifle : Update
Takedown Briefcase AR Thread
Takedown Briefcase AR15 Rifle : Update
AR15.com
Honeoye Falls, NY -(Ammoland.com)- As we continue work on this
Briefcase AR15 Rifle project , it’s improving more and more each week.
We’ve installed and tested a custom built Osprey Defense piston
conversion and we’ve switched to a DD CHF 14.5″ barrel with a
permanently affixed PWS FSC556 compensator.
With these two changes, we took the rifle to the machine gun shoot in
Tampa a few weeks ago and put a few hundred rounds through it and it
is shooting like a dream; smooth and with no muzzle rise whatsoever,
plus the shorter barrel balances the rifle much better and fits in the case
easily. The complete package as it sits today in the case looks like this:
Components Shown Above:
• Lower Reciever with Magpul CTR, MIAD, DD QD mount, Spikes
buffer and BAD Ambi Safety Selector
*123456* Lineitem #123456, tabblo #1, page 11 (11 of 19), generated 2010-09-21 02:14:27.486966 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
12
• Spikes Tactical internals with NickelBoron coated FCG, KNS pins,
and extended takedown/pivot pins
• MGI QCB-D upper with custom Osprey Defense Gas Piston Kit and
FailZero BCG, POF roller cam pim
• DD 14.5″ CHF 1/7 barrel with FSB and PWS FSC556 compensator
• SpecterDR 1-4x Optic and Troy rear BUIS
• Surefire X300 weapon light
• Tactical Link Stealth Single Point Bungee Sling
• 4x 30rd Magpul Pmags
• All in a Pelican 1490 case (with no need for foam cutting as
everything currently fits tightly with no metal-metal contact and
no movement when carrying it)
So as it stands, we have a tricked-out non-SBR AR-15 carbine complete
with railed fore end, magpul furniture, large optics, BUIS, sling, light,
and 120rds of ammo in magazines all packed into a laptop-sized case for
carry or storage anywhere that space is at a premium, and discretion is
required.
We will continue to test and tune this rifle as we still have a few tweaks
we are exploring, and a small list of changes for the folks at MGI to
incorporate into the upper. That will all be followed by another round of
functional and accuracy testing including maintaining zero through
various barrels. In addition, we are working on a few different layouts for
the case, as well as exploring custom cases and options later this week.
If you have any input or would like to make any suggestions for this kit,
feel free to post in the forum listed under the Project AR title above.
I’ll leave you with a couple of pics of a simpler and much classier setup
for this rifle:
Briefcase AR15 : Update
About:
AR15.Com originated in 1996 as a mailing list for firearm enthusiasts. As
the years passed and interest grew, a website came into existence to
present those same enthusiasts with a means to collect, share, and
explore information. Shortly afterwards, a bulletin board was added to
create a more interactive experience for the growing list of users. The site
was still in it’s infancy, but was growing in popularity. Visit:
www.ar15.com
Briefcase AR15 Rilfe
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Takedown Briefcase AR15 Rifle : Update
Tags: AR15, AR15.com, Black Rifles, Custom Guns
AMMOLAND.COM
Things to Consider WhenBuilding A Reliable AR 15 RifleSEP 20, 2010 02:41P.M.
Things to Consider When Building A Reliable AR 15 Rifle
By RAR Guns
RAR Independence XRT Rifle
*123456* Lineitem #123456, tabblo #1, page 12 (12 of 19), generated 2010-09-21 02:14:27.643662 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
13
RAR Guns
Castle Rock, CO --(Ammoland.com)- I often see articles and post
explaining how to assemble an AR15 rifle. While I find many of these
articles to be very informative, most don’t touch on the details that are
required to build a reliable, accurate rifle.
First let’s examine what a reliable AR15 must be able to do. A reliable
Ar15 must first and foremost fire every time you pull the trigger.
Whether in a life or death situation, competition shooting or just
plinking, your weapon needs to work properly. It must also hit what you
are aiming at.
Some of the main reasons an Ar15 will miss fire, is that poor quality parts
were used. Saving a few dollars on a bolt assembly can mean the
difference between a reliable rifle and one that consistently has
problems.
When building a rifle from scratch, you should have a sort of blue print.
You should know what parts you are going to use from the outset as
opposed to just buying parts as you find them on sale. This is not to say
you have to buy all your parts at once. But instead, know what you going
to buy and why you’re using that particular part.
I have seen several instances where someone bought a part because it
was cheap. This later caused problems in the rifle. One guy bought a light
weight buffer and buffer spring because it was very cheap. Upon
completing the rifle, he went to the range only to find that he couldn’t get
two rounds in a row through it because it was short cycling. The buffer
and spring did not match the rest of the parts he was using.
You should know how and what you will be using your rifle for. This will
affect what parts you use to build the rifle. For instance, if you plan to
shoot steel cased ammo in your rifle, you will have much more success
with a 5.56 NATO chambered rifle than a .223 chambered rifle.
You will also need a heavy duty SOPMOD style ejection spring kit. This
will insure that you get a successful shell extraction each and every time
you fire the weapon.
Consider Accuracy
Another thing to consider is how important accuracy is. AR15s vary in
accuracy by quite a bit. They can range anywhere from ¼ MOA to 3
MOA. A lot of the accuracy obviously has a lot to do with the barrel you
choose. A barrel does not have to cost $500.00 to be a good, accurate
barrel. You can achieve a sub 1 MOA with a mid range cost barrel. And
contrary to popular belief, a longer barrel is not a whole lot more
accurate than a shorter barrel in most cases. What you may gain in
accuracy will be lost in mobility and weight.
When thinking about how accurate you weapon needs to be, consider the
mission of the weapon. If it is a combat or tactical competition rifle, you
probably what something you can group a lot of rounds quickly in a
small area as opposed to one shot at a time in a ¼ inch hole. There are
several things that can help in this area. A gas piston system will help
with faster target reacquisition as will a muzzle break/compensator.
There are several products available to modify the receiver
extension/buffer tube as well that will reduce felt recoil.
A high quality trigger and lower parts kit can also aid in requiring your
target quickly. I don’t recommend a two stage trigger for a combat or
tactical competition rifle. Instead, I like a short pull single stage trigger
with about 4 lbs. or less of resistance.
Reliable feed is another area that needs to be addressed. There are a lot
of low cost lower receivers on the market that are very good. There are a
few that are only good for paper weights. A good lower should either be
forged or billet. Never use a cast lower receiver. They are unreliable and
weak.
A quality BCG is very important to reliable feeding. This is what is going
to push the round into the chamber and lock it into place. A poorly
manufactured BCG will be unreliable and possibly dangerous to the
operator and other friendlies in the area.
The upper receiver may or may not have M4 style feed ramps. In today’s
market, I see no reason not to have M4 feed ramps at least in the
chamber. One problem we see a lot is the fit between the M4 cuts on the
upper receiver and the M4 cuts on the chamber matching up. An
improper fit will cause miss feeds and jams. This can be corrected a
couple different ways. If you’re mechanically inclined, you may be able to
fix the problem yourself. If not, take your rifle to a qualified gun smith or
armorer to fix the problem.
These are just a few things that should be considered when starting to
build your own AR15 rifle.
RAR Guns will at no charge or obligation, give free AR
building advice and help to anybody who wants it. No strings
attached.
*123456* Lineitem #123456, tabblo #1, page 13 (13 of 19), generated 2010-09-21 02:14:27.722195 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
14
RAR Independence XRT Rifle
About:
RAR Guns. Home of the best AR 15s in the world. We don’t just assemble
parts. We measure and test each part before it is installed. Then each
part is function tested to insure proper operation. We have several AR15
models to choose from and we also build to your custom specifications.
We warranty our AR15 rifles for workmanship for a full year no
questions asked. Our AR15 rifles will even perform with most Russian,
steel cased and polymer coated ammo. If it breaks or has a malfunction
within one year of purchase, we will correct the problem for free. Visit:
www.rarguns.com
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Things to Consider When Building A Reliable AR 15 Rifle
Tags: AR15, Gunsmiths, RAR Guns
AMMOLAND.COM
GunVoters – Vote YourConscienceSEP 20, 2010 02:06P.M.
GunVoters – Vote Your Conscience
By Jeff Knox
I took the little “I Voted” sticker and carefully placed it on the smooth
stock of the pistol.
FirearmsCoalition.org
Manassas, VA --(Ammoland.com)- I’ve told this story before, but I
think it’s worth repeating. I started carrying on a regular basis over 25
years ago while I was a college student in Prescott, Arizona.
I rented a room in the back of Bucky O’Neill Sporting Goods and worked
part-time for J. & G. Sales, the firearms wholesaler. Guns had always
been an important part of my life and that was especially true in those
days as we were shooting practical courses almost every weekend and
frequently during the week.
I was participating as much as my school schedule and pocketbook
would allow – taking advantage of my employee discounts, using the
shops reloading gear, and making a little extra tuning up single actions
for the cowboy shooters.
In the midst of all of that, the time came for me to cast my first ever, in-
person ballot. Having been overseas for most of the time since my 18th
birthday; I had never actually walked into a polling place to cast a vote
before. I remember parking at the National Guard Armory, shifting my
.45 from my belt to a concealed spot under the seat of my ’66 El Camino,
and going inside to vote.
*123456* Lineitem #123456, tabblo #1, page 14 (14 of 19), generated 2010-09-21 02:14:27.915082 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
15
As I was leaving, a nice lady stuck a little oval sticker on my shirt with a
flag and the words “I Voted” printed on it. The little sticker gave me a
surprising sense of pride and I was feeling rather ebullient as I got back
in the car and slipped the Colt back into its place behind my belt. As I did
so, an idea struck me and I took the little “I Voted” sticker and carefully
placed it on the smooth stock of the pistol.
There was no provision for concealed carry in Arizona in those days, so I
always carried openly. I still do so frequently and I still place my “I
Voted” sticker on the stock. I like the message it sends and the responses
it generates.
As Election Day approaches, it is important that we all remember the
sacrifices that were made to give us this great nation and to remember
that freedom isn’t free. We also need to remember that safeguarding and
restoring that freedom is much more easily done with a vote than with a
gun.
With all of the important issues and challenges facing our nation right
now supporting politicians based solely on their position on individual
rights might seem myopic, but luckily there is a broader issue which
every Second Amendment supporter can strongly stand behind.
That issue is Liberty.
There are clear choices on the ballot this year. On one side are those who
see the Constitution as an obstacle to their objectives and something to
be side-stepped, slipped past, or redefined. On the other side are those
who respect and revere the Constitution and the full Bill Of Rights. This
election could easily be seen as a referendum on the Constitution itself.
GunVoters, need to look closely at the races and make sure that everyone
they know understands the gravity of the current situation. We must take
immediate action to shore up our supporters and block out our enemies.
This is true not only of the politicians you’re sending to Washington, but
your local politicians as well. “All politics is local,” goes the saying.
Recent battles over concealed carry and self-defense have demonstrated
the importance of having solid supporters in state legislatures and
governors’ offices.
It’s up to GunVoters to force early retirement on anti-rights,
anti-Constitution politicians across the country.
If you really want to impact an election, bumper stickers and yard signs
are a nice show of support but nothing moves a voter as much as when
you look them in the eye and tell them that it is critically important that
they vote for your candidate. If you do that with your friends, your
family, your co-workers, everyone at church, all of your neighbors, and
the kid who asks if you want fries with that, your earnest, eye-to-eye
endorsement has the power to make a difference. If you can convince a
dozen or more of your friends to do the same, and they convince their
friends, and so on… together you can change an election.
Now is the time. Start earning the right to attach that “I Voted” sticker to
your sidearm and be proud to be a GunVoter.
Permission to reprint or post this article in its entirety is hereby granted
provided this credit and link is included. Text is available at
www.FirearmsCoalition.org. To receive The Firearms Coalition’s bi-
monthly newsletter, The Knox Hard Corps Report, write to PO Box 3313,
Manassas, VA 20108.
Neal Knox Associates – The most trusted name in the rights
movement.
About:
The Firearms Coalition is a loose-knit coalition of individual Second
Amendment activists, clubs and civil rights organizations. Founded by
Neal Knox in 1984, the organization provides support to grassroots
activists in the form of education, analysis of current issues, and with a
historical perspective of the gun rights movement. The Firearms
Coalition is a project of Neal Knox Associates, Manassas, VA. Visit:
www.FirearmsCoalition.org
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
GunVoters – Vote Your Conscience
Tags: Anti Gun Politicians, Elections, Firearms Coalition, Gun Politics,
Gun Voters, GunVoter.org, Jeff Knox
AMMOLAND.COM
Make Your Pro Gun OpinionCount Trigger the Vote in 2010SEP 20, 2010 01:15P.M.
Make Your Pro Gun Opinion Count Trigger the Vote in 2010
ARFCOM and the Future of the Right to Keep and Bear Arms
By Joe DeBergalis (DirectAction)
AR15.com
Honeoye Falls, NY --(Ammoland.com)- Readers like you and me
along with members of ARFCOM are rarely shy about sharing our
opinions.
Whether the topic is the best way to sling your AR or the forever popular
9mm vs. .45 ACP debate, we relish the opportunity to put forth our point
*123456* Lineitem #123456, tabblo #1, page 15 (15 of 19), generated 2010-09-21 02:14:27.987262 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
16
of view.
But even more important than our opinions about bug out bags and
terminal ballistics is making sure our opinions are recognized at the
ballot box.
Just in time for the 2010 mid-term elections, NRA’s Freedom Action
Foundation has launched the Trigger the Vote campaign, spearheaded by
Honorary Chairman Chuck Norris. The campaign is a non-partisan effort
to get as many pro-Second Amendment citizens registered to vote and
into the polling booths this November as possible.
The centerpiece of the campaign is its website, www.triggerthevote.org,
complete with voter registration forms and a list of polling places. In
addition, the site has tools that make it easy to share this information
through e-mail or the latest social networking channels; so there is no
excuse for like-minded friends and family not to be at the polling place
with you come November.
Despite a wave of victories in recent years, most notably the Heller and
McDonald decisions, gun owners cannot afford to take an apathetic
approach to this election. On the state level there are continuing threats,
like micro-stamping legislation in New York and long gun registration
legislation in California. Federal legislation has been introduced to end
gun shows as we know them, and legislators are under international
pressure to reinstate the so-called “assault weapons” ban.
In addition, President Obama has already nominated two Supreme Court
Justices who can’t be counted on to uphold the Second Amendment, and
with a razor-thin 5-4 majority in both Heller and McDonald, we need a
large pro-gun majority in the Senate to block any future anti-gun
nominees.
Of course the Obama administration’s anti-gun machinations don’t stop
at the Supreme Court. Recently the administration launched a behind-
the-scenes attack on gun owners through Hillary Clinton’s State
Department. In an attempt to raise money for its military, which is
constantly under threat from a hostile Communist aggressor, our South
Korean allies are trying to sell to U.S. importers U.S.-made M1 rifles and
carbines that the U.S. provided to the South Koreans during the Cold
War. But rather than bring these historically significant arms home, the
Obama/Clinton State Department has blocked their importation, since,
according to a spokesman, “The transfer of such a large number of
weapons … could be exploited by individuals seeking firearms for illicit
purposes.”
This is an outrageous statement; considering that transfer of these guns
would be subject to the same NICS checks all FFL dealers are required to
perform. But what makes the State Department remarks truly absurd is
that the government chartered Civilian Marksmanship Program
(CMP) currently sells the same models of rifles in question. A new supply
of these rifles would just allow even more shooters to enjoy these
firearms. After all, the American taxpayer has already paid once for these
rifles and should have the opportunity to acquire one rather than see
them relegated to the scrap heap.
Adding to the nonsense, when asked by Fox News for further comment
on why the M1 rifles were dangerous, the Obama administration
responded with their own version of an Abbot and Costello routine. The
State Department directed questions to ATF, ATF directed questions to
the Department of Justice and the Department of Justice then directed
questions back to the State Department. If this weren’t enough, when
further questioned by Fox, the White House directed questions to the
Pentagon, who directed questions to the U.S. Embassy in South Korea,
which sent the issue back to the State Department.
Many ARFCOM members are already following the M1 importation issue
closely. But just following the story won’t save these historic firearms
from possible destruction. Ultimately, fixing the problem will require
congressional action, and that means electing more pro-gun legislators.
So take a minute to get yourself and your friends and family involved in
the Trigger the Vote campaign. By helping to elect strong pro-gun
majorities in the mid-term elections we can block any future plans the
Obama administration may have of attacking the Second Amendment.
About Joe:
Joe DeBergalis is a big contributor at AR15.com, a great representative
for gun owners everywhere, and a great personal friend. He’s also a
member of the NRA Board of Directors, Vice President of the New York
State Rifle and Pistol Association, and Moderator of ARFCOM’s NRA
Activism Forum. A longtime NRA Election Volunteer Coordinator, he
was named “Volunteer of the Year” in 2005 by NRA’s Institute for
Legislative Action.
About:
AR15.Com originated in 1996 as a mailing list for firearm enthusiasts. As
the years passed and interest grew, a website came into existence to
present those same enthusiasts with a means to collect, share, and
explore information. Shortly afterwards, a bulletin board was added to
create a more interactive experience for the growing list of users. The site
was still in it’s infancy, but was growing in popularity. Visit:
www.ar15.com
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Make Your Pro Gun Opinion Count Trigger the Vote in 2010
Tags: AR15.com, ARFCOM, Gun Bans, Joe DeBergalis, Long Gun
Registry, M-1 Garands, Microstamping, Pro Gun Organizations, Trigger
the Vote, TriggertheVote.org
*123456* Lineitem #123456, tabblo #1, page 16 (16 of 19), generated 2010-09-21 02:14:28.014640 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
17
AMMOLAND.COM
Deer Hunting Tips From MossyOak’s Mike MonteleoneSEP 20, 2010 12:53P.M.
Deer Hunting Tips From Mossy Oak Pro Staff Member Mike
Monteleone
Mossy Oak
WEST POINT, MS --(Ammoland.com)- Deer Hunting Interview with
Mossy Oak Pro Staff Member Mike Monteleone
Q: How important is pre-season scouting?
A: Post-season is the most important time to find the hideaway habits
and travel routes of big deer. However, pre-season is the time to fine
tune your game plan when trying to seal the deal on a mature whitetail in
a new season, especially if your season starts in early September as in
some cases in the east and south.
During early September the bucks are still in bachelor groups and very
easy to pattern. My best pre-season scouting tactics consist of a hand full
of trail cameras and long range spotting scopes. The spotting scopes will
help you determine the exact location of a deer entering a field at dusk
and the trail cameras will help you determine the trails he used to go
back to bed in the morning.
As soon as the bucks shed their velvet they become a different beast.
They are now on constant alert until late October and early November.
At this time of year, try to catch the big boy in transition between
bedding and feeding but as close to bedding areas as possible. Mature
bucks won’t leave the security of cover until late.
Pre-season scouting is important but also very tricky. Try not to spook
game because the season is fast approaching. Check your cameras right
before or during a rain storm. Do not study the pictures on the camera at
the base of the tree it is attached to. You’ll leave too much scent in the
woods and possibly alert the deer to your presence and location. Open
the camera, switch the chips and move on. Always practice scent control
while walking through the ground of your adversary.
Mossy Oak’s Mike Monteleone
Q: How do you go about scouting early season before the bucks are
making scrapes?
A: Deer are very social animals. They communicate in many different
ways, and scraping and rubbing are the signs hunters see the most. The
majority of scrapes and rubs are seen during the rut, but what most
hunters do not know is that deer scrape all year long to communicate
with other deer in their community. A scrape may be made in November
by a love struck buck but there is a chance that the communication may
still go on throughout the summer and into the fall of the following
season. Although the activity of scraping is substantially less, it does still
occur.
Active scrapes in preseason are sometimes hard to find; difficult at best.
The best places to look are still the usual places – stream bottoms,
transitions between thick cover and open hardwoods, edges of
agricultural fields, etc. But be careful when traipsing through the woods
during preseason. You do not want to alert deer of your presence.
No matter where you hunt in the country, a deer’s instinctive habits are
the same for the most part. They all use heavy cover, transitions, funnels
and agricultural fields to eat, travel or sleep, so use bottleneck type spots
in between or around these areas to setup stands. Even if you are
unfamiliar with the area, after you hunt the first few days, you should be
able to fine tune your location to get closer to your quarry.
Q: Do you prefer to hunt in the woods or along agricultural
fields?
A: The best place to ambush a buck is in the woods on a travel route to a
food source. I believe most bucks don’t leave the security of cover until
late and there may not be enough shooting light left by the time the buck
reaches an agricultural field. Your best bet is to find a transition zone
that is in a direct path of a buck as he heads to his final destination.
Usually an oak ridge with a few good producing trees or a logging road
with a sweet browse like honeysuckle will stop the deer for a snack before
he gets to the field. Bucks are not as edgy while staging and feeding in
these areas either, because typically they are under some type of cover.
*123456* Lineitem #123456, tabblo #1, page 17 (17 of 19), generated 2010-09-21 02:14:28.096114 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
18
If you’re trying to harvest a doe, sometimes a field edge is your best bet.
The does always reach the field first and a lot of the time, hours before
dark. Once a doe enters a food plot or ag-field it is as though she drops
her guard just a little which will allow a bowhunter better opportunity.
There is a huge positive when hunting a food plot or field. It is a
concentrated food source and the deer will definitely be there if it is of
good quality. Also, it is in an open space with very little to no cover which
allows the hunter to stay on stand longer. The additional light helps
when judging whether or not the deer is of mature caliber and also
allows a late evening stand hunter better light for shooting accuracy.
If you’re hunting a field edge, be sure to locate your stand in a spot that
will allow you to get out at dark without being detected.
Q: How high should you hang a treestand?
A: The answer is simple. As high as you can comfortably and accurately
shoot your bow.
As we all know a deer’s sense of smell is beyond comprehension. So the
higher you are, the more your scent disperses before it reaches deer nose
level.
If you play the wind correctly, stand height might not play a role other
than hunter movement. However, what if the deer you are hunting
decides to appear from an unexpected direction? If this were the case, I’d
rather be camped-out in the limbs 20 feet up rather than on the trunk of
a bare poplar tree in a 12-foot ladder stand.
My preferred heights are between 17 and 22 feet. Any higher than 25feet,
the shot angle is too steep and the vital area exponentially gets smaller.
Q: Can you have success hunting from the ground?
A: There are a bunch of hunters that choose to hunt from the ground.
Maybe it is because they are afraid of heights or maybe it is because they
are physically incapable of climbing a tree. Or, maybe it is because
there’s no place to hang a treestand. Whatever the case – many deer have
met their demise from hunters in ground blinds and hunters on the
stalk.
Does hunting whitetails from the ground increase your odds? It depends
on the situation. If the wind is just right and hunting from the ground is
the only way to get close enough to send an arrow through a smart
animal, I say go for it!
Q: Are doe or buck decoys effective?
A: Depending on the situation and the age class of deer you are trying to
harvest, a decoy can be effective all season long.
During early season, it is best to use a small doe decoy or a young buck
decoy. The smaller decoys seem to reassure younger deer that “it’s safe to
come and play”. I particularly don’t like to use decoys during early
season just because I don’t want to lug the thing around the woods.
However, during the late pre-rut and early rut I sometimes carry as
many as three decoys in the field. I set up two doe decoys and one big
buck decoy. If there is a mature deer in the area and he sees the spread,
he’ll come fast. Do not set your buck decoy haphazardly – make sure he
is quartering to you so the approaching buck gives you a quartering-away
shot.
Q: Is scent control important when hunting from a treestand?
A: Scent control should be practiced at all times. It should start at home
with unscented detergents for body and clothing, including towels that
you dry off with after you take a scent-free shower. Your hunting boots
should be put on before you go into the woods, not before you get in your
truck. Boots should be doused heavily with a scent-killing spray, and you
should plan your entry to your stand very carefully to minimize the
chances of deer crossing your path.
Carry a small bottle of scent-killing spray in your pack and to your stand.
Once you’re settled and harnessed in, spray yourself again just to destroy
any scent you may have sweated out. Use a gel or lotion type scent killer
for your face, hands and hair before entering the woods also.
Maximize your chances by utilizing good scent control practices no
matter if you hunt from the ground or stand. Good scent control will get
you that much closer.
Q: What calls do you carry?
A: There are many calls a hunter can carry but there are three calls that
every whitetail hunter should have in his fanny pack.
A standard grunt tube is good but a grunt tube that can be adjusted for
different tones and age class grunts and bleats is better. There are times
when an aggressive, deep guttural grunt might spook a deer whereas a
softer, higher-tone grunt will bring an aggressive buck to the base of your
stand. An adjustable grunt tube will afford the opportunity if needed.
A doe “bleat-in-heat” call. The Primos “Can” is the best sounding bleat I
have found. It works wonders during the rut on deer of all ages.
Typically, the can is turned over to create the “bleat-in-heat” but try
blowing through the can to create more authentic and longer drawn-out
bleats.
A rattle bag or authentic antlers. Rattle bags work well but nothing can
compare to the authentic sound real bone makes when clashed together.
Authentic antlers also allow you to finesse the sounds, whether you tickle
the antlers, grind or clash them together.
There is a draw back when using antlers and that is their size and poor
pack-ability compared to a rattle bag. The best size of antler to minimize
the bulkiness is a set of 2×2 mule deer antlers. They sound great and are
easy to nest together and strap to your fanny pack or back pack.
About:
The Mossy Oak ProStaff is a group of top outdoors men and women from
across the country that act as spokespersons for the Brand. Members of
the Elite ProStaff are people the hunting community will recognize from
their hunting expertise and accomplishments, videos, TV and magazine
*123456* Lineitem #123456, tabblo #1, page 18 (18 of 19), generated 2010-09-21 02:14:28.118879 on g1t0238, dpi=225
Today’s Tabbloid PERSONAL NEWS FOR [email protected] 21 September 2010
19
articles. Our Regional ProStaff is a group of accomplished hunters who
promote Mossy Oak in various regions across the U.S. They also manage
a more localized Field Staff in their regions. From event support to retail
store grand openings to radio and TV appearances, our ProStaff adds
value to the Mossy Oak Brand nationally, regionally and locally.
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Deer Hunting Tips From Mossy Oak’s Mike Monteleone
Tags: Deer Hunters, Deer Hunting, Hunting Tips, Mossy Oak, Whitetail
News, Whitetails
AMMOLAND.COM
Gun Talk Welcomes MountainHome, ARSEP 20, 2010 12:37P.M.
Gun Talk Welcomes Mountain Home, AR
Gun Talk Radio
MANDEVILLE, LA --(Ammoland.com)- Tom Gresham’s Gun Talk (R)
welcomes KJMT FM in Mountain Home, Arkansas as the latest radio
station to air the nationally-syndicated radio talk show.
This 5200-watt news, talk and sports station airs Gun Talk on Sundays
from 2PM-4PM Central. “Mountain Talk 97”, found at 97.1 FM on the
dial, began broadcasting Tom Gresham’s Gun Talk this past Sunday,
September 19th, and is officially the highest rated and most listened to
radio station in Baxter County. KJMT FM can also be found on the web
at www.mountaintalk97.com
Did you miss this past Sunday? Dave Workman, writer for the Seattle
Gun Rights Examiner, stopped by, along with Trijicon’s Andrew
Chilkiewicz. Workman spoke to Tom about President Obama’s latest
appointee – Greg Nickels.
Nickels, the former Mayor of Seattle and current gun rights opponent, is
now a United States alternate representative at the U.N.
About:
Tom Gresham’s Gun Talk Radio is in its 15th year of national
syndication, Gun Talk Radio airs live on Sundays from 2PM-5PM
Eastern, and runs on 101 stations, plus SIRIUS XM Satellite Radio. All
Gun Talk shows can be downloaded as podcasts through Apple iTunes or
at www.guntalk.libsyn.com. More information is available at
www.guntalk.com.
Brought to you by - AMMO LAND.COM - Firearms & Shooting Sports
News Ammo Land.com Submit Gun, Ammo and Shooting Related News
at Ammo Land.com
Gun Talk Welcomes Mountain Home, AR
Tags: Arkansas, Gun Talk, Gun Talk Radio, Pro Gun Radio, Shooting
Media News, Tom Gresham
*123456* Lineitem #123456, tabblo #1, page 19 (19 of 19), generated 2010-09-21 02:14:28.147064 on g1t0238, dpi=225