bernard spinal alignment block - innomed
TRANSCRIPT
Designed by Jason Bernard, MB, MD, FRCS
Bernard Spinal Alignment BlockDesigned to act as a right angle “set square”, using stock sterile rods, to help assess intraoperative mechanical axis of the spine
PRODUCT NO:
5006 Dimensions: 5cm x 5cm x 1cm Rod Holes: 5.5mm, 6.0mm & 6.35mm
Holes of 5.5mm, 6.0mm, and 6.35mm are drilled at right angles through the block on the 1cm high faces. Two sterile stock rods can be inserted into the holes to create the "set square".
MADEIN THE USAPROUDLY
FREE TRIAL ON MOST INSTRUMENTS
1.800.548.2362103 Estus Drive, Savannah, GA 31404www.innomed.net [email protected]
912.236.0000 Phone 912.236.7766 Fax
© 2012 Innomed, Inc.
Innomed-Europe Tel. +41 41 740 67 74 Fax +41 41 740 67 71
FREE TRIAL ON MOST INSTRUMENTS
1.800.548.2362103 Estus Drive, Savannah, GA 31404www.innomed.net [email protected]
912.236.0000 Phone 912.236.7766 Fax
Innomed-Europe Tel. +41 41 740 67 74 Fax +41 41 740 67 71© 2013 Innomed, Inc.
Scan toLaunch Our
WebsiteISO 9001:2008 • ISO 13485:2003