concept for danube technology transfer cen- tres including ... · step 4: qualification of dtc...
TRANSCRIPT
-
1
Concept for Danube Technology Transfer Cen-
tres including a tool-kit on DTC creation and
implementation
Project Danube-INCO.NET
Project Number 609497
Deliverable Number: D5.8
Submission Date 30.06.2014
Responsible author(s): Steinbeis-Europa-Zentrum (SEZ)
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
2
Document Control Sheet
Work package Number WP5
Work package Title Promoting Innovative and Inclusive Danube Societies
Task Number T5.2
Task Title Danube Transfer Centres
Deliverable Number D5.8
Deliverable Title Concept for Danube Technology Transfer Centres including a tool-kit on
DTC creation and implementation
File Name 2015-03-06_D5 8 Concept Tool-kit DTC_2nd update
Number of pages 36
Dissemination level Public
Main author Robert Gohla, Daniela Chiran, Dorothea Haas (SEZ)
Contributors Elke Dall (ZSI), Davor Kozmus (Ministry of education, science & sport, Slo-
venia)
Quality Assurance Jadranka Švarc (Institute of Social Sciences Ivo Pilar)
Versioning and Contribution History
Version Date Author/Editor Contributors Description/Comments
_v01 09.04.2014 Chiran/Haas Concept note
_v02 10.04.2014 Elke Dall Review
_v03 08.05.2014 Chiran/Haas 1st draft deliverable
_v04 14.05.2014 Jadranka Švarc QA Review
_v05 15.05.2014 Davor Kozmus QA Review
_v06 15.05.2014 Elke Dall QA Review
_v07 10.06.2014 Gohla/Chiran/Haas 2nd draft deliverable
_v08 13.06.2014 Jadranka Švarc QA Review
_v09 18.06.2014 Haas 3rd draft
_v10 24.06.2014 Jadranka Švarc QA Review
_v11 18.12.2014 Haas Gohla/Chiran 1st update
_v12 06.03.2015 Haas Gohla/Chiran 2nd update
Document last saved on 06.03.2015
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
3
1 Content 1 Content ............................................................................................................................................ 3
List of Figures ....................................................................................................................................... 4
List of Abbreviations ............................................................................................................................ 4
2 Executive Summary ......................................................................................................................... 5
3 Introduction ..................................................................................................................................... 6
4 Tool-kit for DTC creation and implementation ............................................................................... 8
4.1 Step 1 Mutual agreement on integration into DTC network ..................................................... 9
4.2 Step 2 Analysis of environment of DTC ...................................................................................... 9
4.3 Step 3 Analysis of host organisation of DTC ............................................................................... 9
4.4 Step 4 Qualification of DTC staff .............................................................................................. 11
4.5 Step 5 Adjustment of legal structures for DTC ......................................................................... 12
4.6 Step 6 Optimization of operational structures for DTC............................................................ 14
4.7 Step 7 Elaboration of growth strategy for DTC ........................................................................ 16
5 Conclusions and Recommendations ............................................................................................. 18
6 Bibliography ................................................................................................................................... 19
7 Annex ............................................................................................................................................. 20
-
4
List of Figures
Figure 1: Foundations of tool-kit for DTC creation and implementation ................................................ 6
Figure 2: Costs of setting-up a DTC (approximately) ............................................................................... 7
Figure 3: Legal functioning of DTC activity ............................................................................................ 13
Figure 4: Factors influencing pricing ..................................................................................................... 15
Figure 5: Steps of DTC creation & implementation ............................................................................... 18
List of Abbreviations
Danube-INCO.NET Danube Region INCO-NET DoW Description of Work DTC Danube Transfer Centre EUSDR European Union Strategy for the Danube Region I&TT Innovation and Technology Transfer PA Priority Area PC Profit Centre R&D Research & Development SME Small and Medium-sized Enterprise TT Technology Transfer WP Work Package
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
5
2 Executive Summary Deliverable 5.8 outlines a scheme for creating and implementing technology transfer centres in
the Danube region - the so-called Danube Transfer Centres (DTCs). The following report is part of
Task 5.2 “Danube Transfer Centres” belonging to Work Package 5 “Promoting Innovative and Inclu-
sive Danube Societies” in the Danube-INCO.NET project. As such, this deliverable is a part of the
European Union Strategy for the Danube Region (EUSDR) which aims at boosting the development of
the Danube Region. EUSDR addresses a wide range of issues in which Priority Area (PA) 8 focuses in
particular on the promotion of the region’s competitiveness. This document contributes to this goal
to a considerable extent by addressing the challenge of innovation & technology transfer (I&TT). The
present concept for a tool-kit on DTC creation and implementation has been developed in the con-
text of the Working Group I&TT of PA 8 of EUSDR which is coordinated by Steinbeis. In addition to
the Working Group I&TT, Steinbeis could gain experience and good practices in the pilot project “Da-
nube Transfer Centres” in 2012 and 2013. Based on this experience, the present document does
not intend to be exhaustive but provides a useful concept by showing necessary steps for DTC
creation and implementation:
Step 1: Mutual agreement on integration into DTC network in order to create a DTC on a sound
footing (Founding document, legal functioning of DTC activity, employment contracts etc.)
Step 2: Analysis of environment of DTC regarding political, socio-cultural, economic, technological
and environmental and legal aspects is indispensable.
Step 3: Analysis of host organization of DTC such as universities or research institutes.
Step 4: Qualification of DTC staff: Technology transfer is said to be a talent-based business because
often, it is difficult to find people speaking both the language of academia and industry. Results of
various studies indicate the importance for technology transfer professionals to possess soft and
business skills as well as hard skills. Especially, DTC managers have to operate as multiplicators and
communicators between different worlds.
Step 5: Adjustment of legal structures of DTC. This step includes the founding document, the legal
framework in which a DTC should operate as well as payment modalities which result from this.
Step 6: Optimization of operational structures of DTC, for example regarding its portfolio, pricing
methods but maybe also in the form of an elaborated business plans such as the business plans for
DTCs in Nitra, Bratislava and Cluj-Napoca SEZ’s has developed during its DTC project in 2012 and
2013.
Step 7: Elaboration of growth strategy for DTC including the challenges of DTC funding, including,
the conception and elaboration of pilot projects, and the connection of DTCs on regional, national
and European level.
These steps are the building block of the concept for Danube Technology Transfer Centres including a
tool-kit on DTC creation and implementation. Yet, this deliverable is constantly evolving. New experi-
ences which could be gained must be integrated into the concept and new obstacles identified in
practice ask for new answers. In order to be always up-to-date, this document therefore requires
constantly input from new practical experience. Only such feedback loops can ensure that a tool-kit
can help practitioners to create and implement DTCs successfully.
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
6
3 Introduction The EUSDR aims at boosting the development of the Danube Region. EUSDR is a macro-regional
strategy adopted by the European Commission in December 2010 and was jointly developed by the
Commission, the Danube Region countries and stakeholders in order to address common challenges
together. It addresses a wide range of issues in which PA 8 focuses in particular on the promotion of
the region’s competitiveness. This document contributes to this goal to a considerable extent by
addressing the challenge of technology transfer (TT): it outlines a concept for DTCs including a tool-
kit on DTC creation and implementation.
The present concept for a tool-kit on DTC creation and implementation has been developed in the
context of the working group I&TT of PA 8 of EUSDR (PA 8, 2014) which is coordinated by Steinbeis.
During workshops with stakeholders at EUSDR’s Annual Forum in Bucharest and Zagreb and during
further informal meetings, Steinbeis could identify important drivers and obstacles to TT. In addition
to the Working Group I&TT, Steinbeis could gain experience and good practices in the pilot project
“Danube Transfer Centres” in 2012 and 2013. In the context of this pilot initiative, Steinbeis has es-
tablished three DTCs [DTC Cluj-Napoca (Romania), DTC Nitra, and DTC Bratislava (Slovakia)] and has
developed a preliminary tool kit for creation and implementation of DTC. Finally, this deliverable
includes input from the “1. Eastern European Innovation Partnership High-Level Meeting” in Stutt-
gart on 22 and 23 May 2014. This event was part of SEZ’s activities in task 2.1 of Danube-INCO.NET
which intends to support EUSDR Policy Dialogue. Professors as well as practitioners of TT exchanged
best practices and set the ground for an upcoming roadmap to stimulate the respective capabilities
in the Danube Region. This document takes into account the needs, barriers and good practices iden-
tified during of all these activities.
The inputs and ideas gained during these activities have been structured by SEZ according to one
basic concept. TT always implies technology developers and technology recipients. They have to in-
teract closely as shown in Figure 1 – either directly or indirectly via an intermediary such as a DTC.
Figure 1: Foundations of tool-kit for DTC creation and implementation
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
7
Based on the assumption shown above, DTCs have three main priorities.
First of all, they try to support the competitiveness of companies through new product development
in collaboration with universities and/or Research & Development (R&D) organizations. They are
organized as “one-stop-shops” mainly for small and medium sized enterprises (SMEs) with regard to
I&TT and installed mainly at universities and research organizations and will have one common ap-
proach and strategy.
Secondly, DTCs intend to promote the cooperation between universities and companies in Danube
region by bridging the gap between research and innovation. Their mission is to link industry and
research.
Finally, they try to foster the knowledge exchange at Danube level in an inter-regional network.
DTCs can be regional hosts for common projects regarding I&TT. They can coordinate and create
synergies and links between existing TT activities in the Danube area and build a transnational net-
work of TT centres in order to ensure the involvement of international experts at any stage.
Various benefits for the participating organizations can be expected. Firstly, tools for capacity build-
ing can be identified and an increase of resources towards a systematic and professional approach of
TT activities can be achieved. Secondly, international visibility and strong labelling of excellence in TT
may be possible. Last but not least, applied research projects on a regional and European level can be
developed.
In order to fulfil this kind of mission statement, organizations interested in creating a DTC on-site
have get funding to further develop this idea. The process described in this deliverable must con-
tinuously accompanied by funding efforts. Organizations which are interested and motivated to start
a DTC on-site are compelled to look constantly for funding to realize their ambitions. The following
table shows how much the set-up of a DTC costs approximately. It shows that the funding of DTC-set-
up activities should be ensured before starting the process – it may only be possible to start the pro-
cedure when funding is given.
Figure 2: Costs of setting-up a DTC (approximately)
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
8
4 Tool-kit for DTC creation and implementation The approach taken in this document strongly advocates the promotion of existing infrastructure
when it comes to DTC creation & implementation. This means that it aims at creating synergies be-
tween existing infrastructure and the objective of this deliverable. With this end in mind, it this disso-
ciates itself from the European Commission’s consideration to establish new infrastructure, such as
buildings, for new technology transfer centres all over Europe. This kind of “Capacity building” which
starts ex nihilo is not intended in this document. “Capacity building” is therefore only a subordinated
option in our analysis. Rather, this deliverable tries to include relevant activities. The main starting
point is of course the Danube Transfer Centre initiative of Steinbeis. Besides, efforts such as the
Technology Transfer Offices Cycle from Joint Research Centre (JRC) of the European Commission or
Enterprise Europe Network (EEN) are taken into account. Also initiatives on a national level shall be
taken into account such as the “Knowledge Transfer Centre” (KTC) in Austria.1
Not all kind of organizations are suitable for DTC creation. Various criteria should be considered for
the selection of organisation that will host DTCs:
1. Are universities, research institutes or networks in which researchers are leading.
2. Are recognized as leading organizations at national and regional level.
3. Demonstrate a mature stage and the existence of a vision and a strong commitment to un-
dertake developments in the areas of:
a. International integration: cooperation and projects with relevant R& D and / or inno-
vation and technology transfer (ITT) institutions, organizations and / or academic
networks, notorious at European and/or international level;
b. National and regional integration: institutional relations, cooperation and projects
with other national universities and research institutions as well as with organiza-
tions and institutions that have official mission to manage R & D and / or national ITT
(e.g. Ministries, National Agencies) and regional (Regional Agencies and Councils,
Chambers of Commerce etc.);
c. Integration with regional economic environment: collaboration and professional as-
sistance given to economic organizations (significant in number, duration and
amount) and integration in common organisational coagulations with these organiza-
tions (Ex. Clusters, Science and technology parks, etc.).
4. Would be capable to state clearly the availability and commitment in developing the DTC
Network by allocating human and financial resources for the initial DTC institutional creation.
The following sections only apply to organizations that fulfil the above mentioned criteria. They de-
scribe the different steps of creating and implementing a DTC. They are explained in a sequential
manner suggesting a linear application. Yet, the authors of this deliverable would like to emphasize in
this context that the order of the different steps may vary from case to case. Equally, their duration
may differ from case to case as each DTC candidate has its own, idiosyncratic dispositions which must
be taken into account.
1 http://www.bmwfw.gv.at/Innovation/Foerderungen/Seiten/WissenstransferzentrenundIPR-Verwertung.aspx
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
9
4.1 Step 1 Mutual agreement on integration into DTC network
Mutual agreement on integration is a very important step. Basically, it is a threefold procedure:
1. In a first step, SEZ contacts universities and presents the DTC initiative. If the university is defini-
tively interested in the project, a letter of intent (LoI) will be signed. This process can also be re-
versed when universities contact SEZ and express their interest in DTC initiative. Example: Annex
1: Letter of Intent, Bucharest, 28-30 October 2013.
2. In a second step, after having signed the letter of intent, financing of a DTC is the next decisive
step. DTCs can either finance themselves. If this is not possible, SEZ tries to identify funding op-
portunities for the DTCs. For instance, SEZ coordinates or participates in two FP7 projects which
further develop the DTC pilot project. In this phase of DTC implementation, a letter of commit-
ment (LoC) is signed. Example: Annex 2: Letter of Commitment, Regensburg, 27-28 November
2012.
3. In a third step, after one year of working together, the Memorandum of Understanding (MoU) is
signed by the partners. Example: Annex 3: Memorandum of Understanding, Bucharest, 28-30 Oc-
tober 2013.
4.2 Step 2 Analysis of environment of DTC
In order to better understand and assess the potential of certain regions, a general analysis of the
area is indispensable. It is recommended to describe the following aspects:
Political factors: history, taxation policy, governmental stability, etc.
Economic factors: core competences of region or competitive sectors (such as tourism), infra-
structure, existence of hubs for economic development, recession or boom, etc.
Socio-cultural factors: socio-demographic factors in terms of human potentials for TT, which
could influence TT: educational level, educational aspirations by university disciplines, occupa-
tional structure, employment status, age distribution, etc.
Technological factors: internet, social & electronic media, research and development (R&D),
rate of technological change, etc.
Environmental factors: geography, energy consumption, pollution monitoring, etc.
Legal factors: employment law, health and safety regulation, product safety, advertising regula-
tions, product labelling, labour laws, etc.
After having compiled information concerning the above listed aspects, the various factors should be
evaluated. It is useful to categorize the collected information as strengths, weaknesses, opportunities
or threats (SWOT) for a region. An example of such an analysis of business environment can be found
in Annex 4.
4.3 Step 3 Analysis of host organisation of DTC
In order to better understand and assess the potential of a certain host organisation regarding the
above mentioned criteria, a general analysis of this institution is indispensable. Host organizations
can be universities or research institutes where a DTC office may then be created. According to
Steinbeis’ experience, important universities are the most suitable for the sake of TT. In this case, it is
recommended to analyse the following aspects:
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
10
The university in brief
o Number of students, professors, employees.
o Faculties / departments / programs.
o Important dates of university’s history.
The university’s relationship with companies
o What is the strategy of the university regarding demand driven research, the commercializa-
tion of research and its results?
o In what way does the university record results of research and developed technologies and
do companies having access to such databases?
o What is the university known for in the business sector (in companies)?
o What is the contribution of the university to make companies innovative?
o Which success stories about TT to business sector do exist?
o Does the university publish success stories of TT?
o What types of companies (industry, size, location…) make use of services, technologies, etc.
of the university?
o How many patents have been sold to companies?
o Is TT in the university established as a third function beside education and research? With
which person should interested companies get in touch when looking for technologies? Do
you have a central unit that collects and manages inquiries, expressions of interest, etc.
from industry? Is that unit actively promoting TT and how?
o Does your institution have a Project Cycle Management for companies, interested in col-
laboration? What are the standard procedures within your institution for answering expres-
sions of interest, submitted by companies?
o What are the major conferences about innovation, TT and related subjects that are organ-
ised by or with your institution? How many companies participate?
o What programs exist to develop TT from university to enterprises? Who informs companies
about such programs?
The university’s professors
o Do professors know the strategy of the university regarding demand driven research, the
commercialization of research and its results? According to Steinbeis’ experience, professors
only rarely know their university’s TT strategies. Naturally, they seem rather interested in
publishing books and articles in academic journals than networking with business people.
o How many professors have established business relationships with enterprises? Do the pro-
fessors report their activities? To whom? How many professors have established an own
company?
o What incentives does the university offer to professors for transferring knowledge or tech-
nologies to industry? What other incentives exist for professors to provide services for en-
terprises?
o What is the work program of professors per week? How many hours a professor has to
teach? Hours of research?
o What permission from university or from a state institution does a professor need to open
his own company? Is the professor obliged to report the setting up of his company to uni-
versity?
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
11
o Did/do professors ask administration/management of university for support in organising
TT? What are the main questions? What support do the professors look for? Does an agency
or service centre exist that support Professors in developing and doing business outside of
your institution?
o What trainings or seminars are offered to professors regarding innovation, TT, marketing,
entrepreneurship, etc.? How many professors participate? Do professors have possibilities
to go abroad for on-site training?
4.4 Step 4 Qualification of DTC staff
The first step of the qualification of DTC staff is the identification of skills & competences needed. TT
is said to be a talent-based business as it is often difficult to find people speaking both the language
of academia and industry (Krattiger, at al, 2007). Indeed, practical experience shows that TT practi-
tioners must have a wide range of capabilities. Results of various research indicate the importance
for technology transfer professionals to possess soft and business skills as well as hard skills. There
are seven in total which are said to be crucial (Mom, Oshri and Volberda, 2012; CERT-TTT-M Consor-
tium, 2008; ETTM, 2008):
Soft & business skills
o Communication & networking: theoretical knowledge about communication theories, networks
for TT and English language is crucial. These skills allow to speak in public, valorise and present
ideas, to coordinate a team, manage a meeting or workshop, to solve conflicts, advise staff, to
understand external communication issues and last but not least to develop stable relations with
stakeholders. Comprehensive information on the topic of communication, including theoretical
foundations and practical application, can be found at the website of the International Communi-
cation Association: http://www.icahdq.org/.
o Negotiation: theoretical knowledge about communication and negotiation theory. This knowl-
edge is fundamental to identify the process and content in negotiations, to recognize different
styles in negotiations, to understand cultural and individual aspects in such situations, to identify
key factors to success and to merge expectations of both researchers and companies. 2
o Project management: theoretical knowledge about operational and strategic planning and mar-
keting questions. This helps to define an assignment and results in a project, to plan different pro-
ject phases, control the different project factors (time, budget, quality, information…), to write a
project plan and to do a risk analysis.
o Technology commercialization: theoretical knowledge about legal issues of commercialization,
market assessment and technology marketing is useful. It allows to analyze a market and com-
petitive technologies to determine the commercial potential of an idea and its viability, to con-
duct a market segmentation and to push a technology far enough to get pulled by the market.
o New business development: theoretical knowledge about development of business plans and
evaluation methodologies, general management notions and foundations of economics is useful.
It helps in practice to elaborate business plans for a new company/product, find potential com-
mercial partners or investors and to promote ambitions of entrepreneurship in general.
2 Comprehensive information on the topic of negotiation, including theoretical foundations, practical application and further sources, can be found in the article of Alfredson and Cungu (2008).
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
12
Hard skills
o IPR and licensing: theoretical knowledge about IPR legislation, patenting process, types of IPR
Agreements is useful. This knowledge helps in practice to assess the best protection possibility for
a certain innovation, to design an IP strategy, within a given budget or write an IPR Agreement.
o Domain-specific knowledge: it is helpful if the DTC staff has an academic background as this
allows him or her to be expert in certain issues such as health, environment, energy etc. Informa-
tion gathering & analysis is decisive in this context. A professional in TT should have theoretical
knowledge about patent, company and journal databases to be updated.
There are various possibilities to train the staff of a DTC to make them acquire the needed compe-
tences. Important ones are listed in the following.
Staff exchanges between new DTCs and established DTCs.
Twinnings between new DTCs and established DTCs.
Coaching and mentoring between new DTCs and established DTCs (e.g. template of a company.
audit form of DTC Cluj adapted by other DTCs can be found in Annex 5).
Online platforms and tools, massive open online courses.
Trainings in specific thematic areas (e.g. acquisition of clients, innovation auditing, conception of
projects, proposal writing, centre management etc.). An example of a training agenda can be found
in Annex 6.
The role of a manager of a DTC is especially complex and demanding as he or she has to understand and
work with both researchers and business people. Such as person should have the following attributes:
Access to professors and university: It is important that the chief manager of the DTC is a very
communicative and active person having close connection to the management of the host organiza-
tion.
Networking with regional cluster activities: Beside his or her relationships to the host management,
the chief manager must also be on good contact with the regional cluster activities. This allows iden-
tifying more easily suitable partners for business cooperation.
Marketing skills: above all at the beginning of the DTC it is decisive that the chief manager knows
how to make the DTC popular. Possible customers, clusters, universities and political persons must
know about it so that they themselves can recommend it.
Technical knowledge: in many cases, technical knowledge of a certain field is asked in order to be
able to evaluate business ideas.
Access to companies (entrepreneurial spirit): ideally speaking, the chief manager of the DTC knows
how companies and entrepreneurs are thinking and what their efforts are directed at.
4.5 Step 5 Adjustment of legal structures for DTC
Founding document: a basic document which states
o The creation of the DTC as a legal entity .
o A definition of the DTC’s goals (Its interests must not be opposed to the objectives of the
host university).
o The names of the persons responsible as well as their signatures (nomination of DTC
managers).
o Possible shareholders of the DTC.
o The legal registration of the DTC.
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
13
Interaction: The functioning of a DTC requires certain conditions. The DTC is a legal entity which
is hosted by another organization such as a university. As a consequence, there is a contractual
relationship between the DTC and its host organization. There are employment contracts be-
tween the DTC and its staff or representatives. These individuals can sign contracts in the name
of the DTC with customers such as SMEs. This creates a contractual relationship between the DTC
and the customer. The legal functioning of DTC is explained in the figure below.
Figure 3: Legal functioning of DTC activity
Employment contracts: Each professor’s connection to the DTC can be regulated by a manager
contract which is concluded with him. As these contracts have to take into considerations inter-
national differences in law, there are no templates for it. In this contract, the rights and obliga-
tions arising from the independent project management must be defined. In addition, it is rec-
ommended that only the DTC organization, not the DTC manager, can be held responsible.
Mode of payment: Employees in the DTC PC are partly acting on the basis of a project manager
contract3 that does not include an employment relationship and which foresees remuneration
exclusively on a fee basis (thus, the project manager is working as a freelancer in the DTC PC).
Furthermore, there is the possibility of permanent employment of employees). Each DTC PC can
have its own bank account, of which the PC manager and the manager of the regional DTC may
dispose. The DTC PCs can pay a certain percentage of all their receipts as a so-called network fee
to the regional DTC. The network fees can be used to cover, among other things, the costs of the
centralised services related to the specific DTCs.
Performance measurement: The DTC PC can provide solutions based on the rules of the private
sector and will manage the resulting projects on behalf of the DTC network, the regional hosting
organisation being liable in external relations. The DTC PC managers have to provide a balanced
annual turnover. Moreover, in the framework of the internal contractual conditions for DTC PC
manager, they can decide on their own on receipts and expenditures (including fees, salaries,
and investments) as well as on prices. During the DTC project, DTC managers were asked to the
achievements of their DTC (number of trainings, projects, proposals etc.). On the one hand, these
activities indicate the demand from SMEs; on the other hand, they show the ability of DTCs to re-
spond to this demand.
3 It is not useful to develop a template for a manager contract as there a considerable differences regarding the legal regulation of con-tracts.
DTC Profit center (e.g. professor)
Customer (e.g. customer) Host organisation
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
14
4.6 Step 6 Optimization of operational structures for DTC
Portfolio: A rough idea of services that may be useful to offer in general can be found here:
Identification of technology needs from the industry and especially SMEs. These needs can be
identified through innovation audits performed in the companies. By means of an Innovation
Audit, one can analyze the innovation performance of companies or regions with the aim to in-
troduce changes or improvements when required. At the corporate level, an Innovation Audit
is used to evaluate technological capacities, procedures, and technology needs of companies.
Furthermore, it can help companies to identify and assess their strengths and weaknesses and
to envisage concrete measures in an action plan. A (Regional) Innovation Audit can support
policy-makers by improve understanding of issues relevant for their region such as competi-
tiveness, innovation, research, technological capacity, and organizational change, etc. To do
so, a profile of innovation is developed and appropriate indicators and benchmarks are identi-
fied. Regional Audits often propose pilot activities and/or recommendations for further ac-
tions.
Identification of technology offers from the universities and research centres in collaboration
with existing networks like Danube Rectors Conference.
Active technology watch.
Identification of possible fields of cooperation.
Identification of partners for collaboration (on regional, national and European level)
Hosting of specific research programs (e.g. national/cross-border science initiatives, innova-
tion/transfer vouchers etc. financed by national/European [e.g. European Social/European Re-
gional Development] funds).
Trainings of (scientific and economic) stakeholders in regard of innovation (strategies and
management), TT (strategic partnerships and management) and project management (building
of consortia, writing of proposals, administrative and financial project management).
Counselling and intermediation for TT, Intellectual Property, technology licensing.
Counselling and assistance for business plans, investment plans, marketing plans.
Assistance for compliance with European legislation, standards, norms, accreditations.
Interfacing/representation with informal investors, investment funds, joint ventures, authori-
ties, associations, professional bodies.
Customized research, direct consultancy, assistance and high-end services (e.g. virtual testing
environments) for specific issues.
Stimulation of entrepreneurship (business plan contests, business incubator for stu-
dents/young graduates. Examples of stimulation of entrepreneurship:
o Horizon 2020 call “MG.9.7-2014 Innovation awards for students and researchers in the
context of the Transport Research Arena conference - TRA 2016“.
o Framework Programme 7 project „NoGAP- Bridging the gap between research, innova-
tion and business“.
Pricing is a very complex and sensitive issue in marketing. Thus, a careful consideration of all factors
of pricing in a service business, such as DTCs are, is indispensable. Based on the assumption that you
want your DTC to be profitable, the following factors should be considered, as shown in Figure 11:
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
15
o Costs: A DTC must first determine the cost of providing a service, and then add an additional
amount to represent the desired profit. A DTC should definitively bear in mind the following
costs:
o Material: e.g. computers for DTC staff, training documents for participants.
o Labour: e.g. consultancies – 500-1000 Euro/day.
o Travel: e.g. trainings, staff exchange or meetings - plane, hotel, subsistence.
o Overheads: e.g. rent, electricity etc. for DTC office.
o Competitors. A DTC need to be aware of the prices of organizations offering the same or
similar services in the marketplace, for example Chambers of Commerce and Industry. It
might be also possible, in the case of a DTC, that there are no organizations offering similar
services. Than this approach is negligible.
o Customers: A DTC must understand how much a customer is willing to pay for a service. This
may not be how much time DTC staff has spent providing the service, but ultimately what
the perceived value of that service and your expertise is to the customer.
Figure 4: Factors influencing pricing
Business Plan: The consolidation process allows to structure the ideas, thoughts and actions and to
analyze the key elements necessary for a successful business. Later, it is also a communication vehi-
cle describing the business concept to others. In the context of SEZ’s DTC project in 2012 and 2013,
business plans for DTCs in Nitra, Bratislava and Cluj-Napoca have been developed. This task helped a
lot to clarify and consolidate DTC structures. The main elements should be comprised:
1. Executive summary
(introduction of basic facts about establishing TTC/TTO, overview of key parts of the plan).
2. Mission
(short-term, mid-term and long-term objectives, description of needs and benefits, description of
competitive advantages and experiences).
3. Products and services
(how they will be made, delivered, and developed, internal/external services).
4. Intellectual property or other protection
(patents, copyrights, trademarks, service marks, licences, information security).
5. Market analysis
(size, growth, location, characteristics, important segments, partners for cooperation/clusters).
Competitors
Costs
Pricing
Customers
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
16
6. Customers
(categories of customer group, identification of influencer and decision-maker) .
7. Marketing strategy/plan and PR
(communication channels, invention marketing, project activities, plan of business development).
8. Infrastructure
(human and organisational infrastructure – positions, or sections/departments, key responsibilities,
human resources policy).
9. Operational plan
(description of physical infrastructure and IT infrastructure, risk management, etc.)
10. Financial plan
(personnel & administrative costs, fees, cash flow, sources of income, profit/loss projection).
4.7 Step 7 Elaboration of growth strategy for DTC
Regional and national connectedness can be achieved by networking with regional research insti-
tutes, chambers of commerce, specialized NGOs, and specialized networks / clusters. Furthermore,
networks can be established by common events with national partners on TT themes of general in-
terest and the dissemination of the centre’s results (website, newsletter, social networks, confer-
ences, seminars, public awareness events). Connectedness at a European level can also be achieved
by different ways: The different DTCs themselves should meet in regular manner or at least exchange
regularly their experiences, ideas and progress. This helps to keep each other updated, to transfer
best practices and thus, to constantly improve DTC services. Besides, interregional matchmaking and
participation in international fairs and exhibitions is a good way to get connected at all levels. In addi-
tion, in order to get viable, DTCs should try to enter their partners’ networks, for instance: universi-
ties’ network, Enterprise Europe Network, TT networks, Steinbeis network etc. This allows to further
expand the own customer base at European level and make the DTC business more sustainable.
With the help of such networks, there are several possibilities for funding. Irrespective of the type of
funding the DTC gets, it will help to boost the growth of a DTC. The decision for one or several types
of funding depends on various factors. The legal conditions in which the DTC operates are important.
Besides, for reasons of risk diversification, it is recommended to DTC to mix their funding sources and
not only rely on a single one.
DTC services: Companies receive services from the DTC and reward them according to the
budget set at the beginning of the project. This is a question of knowing the demand and needs
of its environment. All DTC should care about their customers actively and may also try to estab-
lish professional customer-relationship-management procedures. These relationships are crucial
to sell services successfully. At the same time, it is a good channel to understand the needs of the
customers and adapt the service portfolio accordingly.
In-kind-contribution from host university. For example, DTC Nitra is established and operated
thanks to the in-kind-contribution of the Slovak University of Agriculture.
National public funds: DTCs can apply for public money to finance and to coach start-ups lead
and managed by previous scientist. It is clear that entrepreneurial skills are needed which are dif-
ferent from scientific behaviour. And not all scientists have the knowledge and expertise to deal
with issues like liability, VAT, balance sheet or personnel management. So DTCs can use public or
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
17
public-private partnership programs and instruments. For this purpose, two German examples
can be found here:
o http://www.exist.de/ H2020 – CBTT-1-2014
o http://www.high-tech-gruenderfonds.de
Other European countries have similar programs, instruments or funding possibilities.
International funds: participation in international programs is often based on calls and tenders.
For instance, DTCs can apply for calls in Horizon 2020. Assistance in the identification of national
and international programs can be offered by more experienced DTCs. Moreover, public and bot-
tom-up programs and funds like the European Investment bank play an important role for the
technology transfer funding. An example is available online at:
http://www.eif.org/what_we_do/equity/technology_transfer/. In general, it is recommended to
analyze national and European project financing instruments in regard of their usability for the
work of DTCs and objectives of Danube Strategy. With respect to this, it might be useful to scan
the different European programs. For instance, SEZ is coordinator of the INCO 9 project NoGAP.
NoGAP also aims at strengthening economic ties between Europe and the countries of Eastern
Partnership (EaP) and has therefore consortium members from Belarus, Georgia and Ukraine. In
the context of this project, reports will be produced which, based on the results of a question-
naire, will design the guidelines for creating future Technology Transfer Centres (TTCs) in the EaP
region and describe the issues on how to finance services for TTCs. A decisive advantage in this
endeavour is the overlap of actors in this respect. Two DTC partners are also members in the
NoGAP consortium: Cluj-Napoca in Romania and Nitra in Slovakia. As former countries of the
Eastern Bloc they understand very well the problems which the EaP countries are facing now.
Thus, they can contribute considerably to the development of TTCs in Minsk, Kiev and Tbilisi by
transferring the knowledge gained during the DTC pilot initiative to the EaP countries. In the fu-
ture, it might therefore be useful to scan the different work programs of Horizon 2020 and to try
to apply for a call. This can allow the development of other flagship projects to fund innovation
and technology transfer in the Danube area.
TT funds: In supplement to typical risk capital or venture funds managed by banks, business an-
gels or capital investment entities, it is worth considering and analyzing TT funds introduced and
managed by research organizations themselves but not universities. One important tasks is the
support for scientist willing to change to enterprises or even ready to define their own and new
business (start-ups). In Germany all major research organizations offer and manage such funds
e.g. Max-Planck-, Helmholtz-, Leibniz-Society or Fraunhofer.
o https://www.helmholtz.de/forschung/technologietransfer/foerderinstrumente/helmholt
z_validierungsfonds/
o http://www.leibniz-gemeinschaft.de/transfer/transferportal/
o http://www.max-planck-innovation.de/de/technologietransfer/erfolgsbilanz/
o http://www.fraunhoferventure.de/
American universities have comparable funds and manage them directly. That means they
make grants or deal with credits in order to finance TT in terms of market implementation. Such
Technology Commercialization Funds (TCFs) could be analyzed in detail. An example is available
at: http://tedco.md/program/technology-commercialization-fund-tcf/
Venture capital: this is not the major investment tool for TT - it joins a business creation project
at a rather late stage of development, when high investments are needed to finance growth and
https://www.helmholtz.de/forschung/technologietransfer/foerderinstrumente/helmholtz_validierungsfonds/https://www.helmholtz.de/forschung/technologietransfer/foerderinstrumente/helmholtz_validierungsfonds/http://www.leibniz-gemeinschaft.de/transfer/transferportal/http://www.max-planck-innovation.de/de/technologietransfer/erfolgsbilanz/http://www.fraunhoferventure.de/http://tedco.md/program/technology-commercialization-fund-tcf/
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
18
high market penetrations. Start-ups with visionary growth expectations and well prepared busi-
ness plans are more in focus than ordinary TTs, which may have a very good market chance but
do not offer high return of investments as expected by venture capital. Business Angels are more
prepared to act as seed or even pre-seed investors, if they are confident with the personality be-
hind the invention and the development.
5 Conclusions and Recommendations A concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and imple-
mentation is a deliverable which is constantly evolving. New experiences which could be gained must
be integrated into the concept and new obstacles identified in practice ask for new answers. In order
to be always up-to-date, this theoretical document therefore requires constantly input from practice.
Figure 13 represents a preliminary guideline for DTC creation and implementation and must always
be contrasted with practical needs. Only such feedback loops can ensure that a tool-kit can help
practitioner to create and implement DTCs successfully.
7. Development of growth strategy
Co
ntin
uo
us: Fu
nd
ing
6. Optimization of operational structures
5. Adjustment of legal structures
4. Qualification of DTC staff
3. Analysis of host organization of DTC
2. Analysis of environment of DTC
1. Mutual agreement on integration
In principal: suitability (fulfillment of selection criteria)
Figure 5: Steps of DTC creation & implementation
Preparation /
Set-up Consolidation /
implementation
-
19
6 Bibliography Alfredson & Cungu (2008). Negotiation Theory and Practice - A Review of the Literature. FAO/EASYPol. http://www.fao.org/docs/up/easypol/550/4-5_negotiation_background_paper_179en.pdf, 04.06.2014. CERT-TTT-M Consortium (2008). Training Framework for European Technology transfer Managers. http://www.ttt-manager.eu/download/CERT-TTT-M%20Training%20Framework.pdf, 07.05.2014 Krattiger, A., Mahoney, R.T., Nelsen, L., Thomson, J.A., Bennett, A., Satyanarayana,K., Graff, G.D., Fernandez, C.,Kowalski, S.P. (2007) (Eds.). Establishing and Operating Technology Transfer Offices. In Executive Guide to Intellectual Property Management in Health and Agricultural Innovation: A Hand-book of Best Practices (Krattiger, et al,2007.). MIHR (Oxford, UK), PIPRA (Davis, USA), Oswaldo Cruz Foundation (Fiocruz, Rio de Janeiro, Brazil), and bioDevelopments-International Institute (Ithaca, USA). Mom, T.J.M., Oshri, I. & Volberda, H.W. (2012). The Skills Base of Technology Transfer Profession-
als. Technology Analysis and Strategic Management, 24(9), 871-891
NoGAP - Bridging the gap between research, innovation and business creation (2014). http://www.no-gap.eu/, 08.05.2014 PA 8 (2014). Priority area 8 of EUSDR, http://groupspaces.com/Competitiveness/, 08.05.2014. The European Technology Transfer Manager (2012). http://www.etmproject.eu/uploads/file/D.3.3%20TTM%20competence%20profile%20report.pdf, 07.05.2014
http://hdl.handle.net/1765/38047http://hdl.handle.net/1765/38047http://groupspaces.com/Competitiveness/
-
20
7 Annex Annex 1: Letter of Intent, Bucharest, 28-30 October 2013
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implementation
(D5.8) Danube-INCO.NET
21
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implementation
(D5.8) Danube-INCO.NET
22
-
23
Annex 2: Letter of Commitment, Regensburg, 27-28 November 2012
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implementa-
tion (D5.8) Danube-INCO.NET
24
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implementa-
tion (D5.8) Danube-INCO.NET
25
-
26
Annex 3: Memorandum of Understanding, Bucharest, 28-30 October 2013
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
27
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
28
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implemen-
tation (D5.8) Danube-INCO.NET
29
-
30
Annex 4: Example of SWOT analysis for a DTC
Strengths - university education of transregional importance (two universities in „...“: „...“ and „...“) - proximity to „...“’s scientific and research base – possibility of close coopera-tion in research and development - strong companies with foreign investments - strong position of the region in the production and supply of electricity - rich history of plastics industry, engineering industry, chemical industry and agriculture - strong electrical industry thanks to joint ventures with foreign companies - „...“ is the centre of exhibitions and fairs – Agrokomplex - well-established tradition of agriculture and food processing industry (10 out of 40 biggest food processing companies in „...“ established within „...“ region) - strong research base: universities, institutes of „...“ dealing with agricultural research - „...“ is participating in the 7th framework programme –projects linked to foodstuffs, agriculture, biotechnologies and fishery - presence of numerous Centres of excellence: Centre of excellence for food processing industry; Centre of excellence for research of genetic animal re-sources; Bio-experimental laboratory of quality, utilization and security of nutritional sources in animal production; Centre of excellence for protection and use of agrobiodiversity; Centre of excellence for integrated management of river basins; Laboratory for breeding, computational genetics and research of animal genetic resources
Weaknesses - high rate of unemployment - weak use of alternative energy sources – „...“ offers study programme “Techniques for renewable energy sources” for the training of qualified ex-perts. Development of concept paper with the methodology of natural re-sources use is currently part of the international project “Towards resource efficient urban communities in SEE” - low investments in comparison to the other regions of western „...“ - low wage level in the region causing lower purchasing power of its inhabi-tants - absence of new and modern production technologies in most of the compa-nies - low concentration of innovative companies in the region - missing research and development in most of the companies and weak inter-connection of scientific and research base with enterprises. - lack of finance invested in agriculture - weak competitiveness of agriculture in comparison to other European re-gions
Opportunities Threats
-
Concept for Danube Technology Transfer Centres including a tool-kit on DTC creation and implementation (D5.8)
Danube-INCO.NET
31
- availability of highly educated and professional work force - willingness of cooperation between universities, business sector and the region - prevention of brain drain - proximity of important European regions – Vienna and Budapest - potential for cross-border cooperation - possibility to participate in various networks - attractiveness for foreign investors - processing of agricultural production creating added value - dynamic development of automotive industry - production and more intensive marketing of ecological products - potential energetic overproduction of the region in the next 2-3 years - space for „...“ and its research and development activities to fill the gap in decreasing self-sufficiency of food production - development of industrial parks and scientific and technological parks in industrial areas - establishment of biological park – „...“ - establishment and development of business incubators, support of start-up companies and innovative entrepreneurship - use of green energy sources - support of Slovak SMEs in the region - current and future inflow of structural funds - expansion of science, research and innovation (e.g. agricultural research in „...“)
- increasing unemployment, low wage level in the region - ageing population - risk of brain drain - decreasing number of labour force educated in agricultural sector, lack of relationship to land – move of young people to other sectors - risk of suboptimal composition of the team responsible for fulfilling of Re-gional innovation strategy objectives - absence of links between universities and scientific and research institutes and businesses in the region - concentration of investments to the largest cities in the region - low added value of production - redemption of strategic enterprises by foreign investors - risk of insufficient interest of „...“ in the realization of agricultural develop-ment policy and agricultural research - absence of long-term development strategy in the educational sector - political risks, new legislative requirements of the EU (e.g. in agricultural sector) - inefficient spending of funds (e.g. structural funds) - risk of lack of funds for the realization of projects which are in line with the Regional innovation strategy and infrastructural projects - long-term underfinancing of universities reflected in lower quality of educa-tion, insufficient equipment and absence of scientific and research centre - support of big foreign investors instead of domestic SMEs - lack of capital resources for the development of agricultural production en-suring food self-sufficiency of the region - low level of scientific and research activities - absence of private research activities - inflexible system of education not responding to the needs on the labor mar-ket
-
32
Annex 5: Template of company audit form
Chestionar 1:
Contact initial
1. Informații generale
Numele companiei
S. C. HYDRO ENERGY SOLUTIONS S.R.L.
Adresa Bd. 21 Decembrie 1989 Nr 104, Etaj 7
Cluj Napoca, Judetul Cluj
Persoana (-e) de
contact
Ing. Itu Costel Hapa
Telefon
0741-406925
Fax
0264 403588
E-Mail
Internet (URL)
http://www.hydroes.ro/ro
Activitatea principală a companiei:
-
33
Obiectul principal de activitate al companiei este reprezentat de oferirea serviciilor de proiectare și
consultanta in domeniul constructiilor hidroenergetice, lucrarilor hidrotehnice, lucrarilor de
infrastructura si de mediu..
Numar de angajati/ ingineri: 7/7
Cifra de afaceri (optional): 854761 lei
Anul infiintarii: Anul 2010
2. Ce fel de produse/ tehnologii ofera compania? (in ordinea cifrei de afaceri)
Proiecte de realizare de microhidrocentrale, oferind asistenta prin urmatoarele etape: efectuarea de
studii necesare procesului de proiectare, studii de fezabilitate, realizarea proiectului, precum si
asistenta tehnica atat in timpul intocmirii proiectului, precum si dupa finalizarea acestuia.
3. Clienți (optional)
S.C. Rott Energy S.R.L. din Cluj-Napoca, S.C. Seb Energy S.R.L.
4. Compania deruleaza in prezent un proiect?
“Nu ne ocupam de un proiect in prezent, dar suntem, in general, interesati de:”
Constructii hidrotehnice, in mod special constructii hidroenergetice, precum si constructii civile si
infrastructura.
“Ne pregătim pentru un proiect.“ / “Derulăm un proiect în acest moment.”
Descrierea generala a proiectului:
……………………………………………………………………………………...
………………………………………………………………………………..…….
……………………………………………………………………………………...
…………………………………………………………………………………..….
…………………………………………………………………………………..….
………………………………………………………………………………..…….
………………………………………………………………………………..…….
-
34
………………………………………………………………………………..…….
…………………………………………………………………………………..….
Tipul proiectului:
Dorim să vindem tehnologia/ produsul propriu pe piața europeană
Suntem în căutarea unei noi tehnologii/ produs pentru întreprinderea noastră
Dorim soluționarea unei probleme tehnice
Suntem în căutarea unui partener pentru a desfășura activități comune de C&D
Dorim să aplicăm pentru un program cu finanțare europeană
Suntem în căutarea unui partener pentru un proiect propriu cu finanțare europeană
Altele:
………………………………………………………………………………….………………………
……………………………………………………………………………………………….
4.3 Statutul curent al proiectului: Descrieți progresul realizat în cadrul proiectului?
Ideea proiectului x
Au fost definite obiectivele proiectului
A fost definită structura și parcursul proiectului
Proiectul a fost conceptualizat și s-au găsit parteneri pentru acesta
S-a realizat deja o propunere pentru finanțare
4.4 Ce activități au fost efectuate deja?
A avut loc contactul cu posibili parteneri
Studiu / cercetare de piață x
Cercetare Internet / bază de date x
Activități nereușite (dacă da, vă rugăm să detaliați)
Experiențe similare suplimentare:
…………………………………………………………………………………………...….
……………………………………………………………………………………………….
-
35
5. Vă rugăm să specificați domeniile în care doriți sprijinul DTC Cluj-Napoca:
Deschiderea unei noi piețe țintă în Europa pentru tehnologia companiei
(gama tehnologică) x
Găsirea unei soluții tehnologice în interiorul companiei (cercetare tehnologică) x
Căutarea unui partener pentru cooperarea în cadrul activităților de C&D
Căutarea unui partener pentru o societate mixtă (joint-venture)
Informarea cu privire la programele de finanțare naționale sau europene x
Pregătirea sau definirea unui proiect european
Corectarea sau proiectarea unei propuneri de proiect x
Management de proiect x
Technology watch – captarea, analiza, diseminarea și exploatarea informațiilor
tehnice utile pentru companie
Managementul inovării
Comentarii:
……………………………………………………………………………………………
……………………………………………………………………………………………
Actiuni viitoare:
- Compania este interesata pe viitor de implementarea unui sistem de management integrat.
- Imbunatatirea oferetie pentru participarea la licitatii in vederea obtinerii de lucrari in domeniul
hidroenergetic.
-
36
Annex 6: Example of training agenda
Training for multiplicators “Train the Trainers”
How to write a successful proposal
Trainer: Daniela Chiran – Project Manager (Steinbeis-Europa-Zentrum) Content of Training:
Introduction and Group Dynamics
Call text analysis and proposal conception - Why? Explain the problem / justify the relevance / main challenge - What? Goals of the project / approach of the project / for witch applications - How? New aspects of technology / Innovations / partners needed and expertise
Work packages, tasks, Milestones, Gantt chart, Deliverable list
Impact, Budget
Dissemination and exploitation of project results Schedule of Training:
10:00 – 12:00 Workshop
12:00 – 13:00 Lunch
13:00 – 14:45 Workshop
14:45 – 15:00 Coffee break
15:00 – 17:00 Workshop