e-cube · 2019-04-15 · type siemens siprotec 5 platform – model: 7sj82 communications n/a...
TRANSCRIPT
Clean Technology Partners (CTP) is an independent
engineering and solutions provider delivering innovative
engineering solutions for solar PV projects. We work
on a wide range of systems from large rooftop systems
to multi-megawatt solar farms.
In partnership with Siemens Australia, CTP has developed
the e-Cube grid connection solution. The complete
solution combines engineering, grid connection studies,
HV switchgear protection, communications, metering
equipment and testing / commissioning services.
This provides a turn-key solution for your small to
medium scale solar farm.
www.clean-tech.com.au I Tel: +61 (3) 9005 7371
e-Cube
The CTP e-Cube provides a “plug and play” grid connection package for Utility Scale Solar Farms. We provide products that help our clients to obtain grid connection without delay and at low cost.
The CTP e-Cube is a turn-key grid protection solution for the Utility Solar Farm sector. It is manufactured and pre-programmed to meet the specific requirements of each of Australia’s NSPs.
e-Cube Features:• Point of disconnection between
solar farm and grid
• Advanced Protection Systems for solar farm and grid
• Remote access1 and SCADA interface2
• Revenue grade metering for solar farm energy and LGC creation
• OPTIONAL - In-built Power Quality Meter – NER R2 ready3
Simple, Easy & Cost Effective
e-Cube Application
1 Only available for e-Cube Advanced and Pro models 2 Only available for e-Cube Pro models 3 Only available for e-Cube Pro models
e-Cube – Utility Grid Connection Solution
Benefits
• Turn-key grid connection solution – reduces grid connection headache
• Combines Switchgear, Metering, SCADA and installation in one package – reduces complexity
• Standardised solution – reduces engineering and project management costs
• Remote access4 – reduces operation cost and safety risk
• High quality equipment and established suppliers give long life and availability of spares
ELECTRICAL SPECIFICATIONS (Applicable for BASIC/ADVANCED/PRO)
CONNECTION VOLTAGE 11kV 22kV
Rated Voltage (kV) 12 24
Rated Frequency (HZ) 50 50
Rated Short-Duration Power- Frequency Withstand Voltage (kV) 28 50
Rated Lightning Impulse - Withstand Voltage (kV) 75 125
Rated short-time: Withstand current for 1.0 sec (kA) 20 16
IAC Classification A FLR 20kA 1s A FLR 16kA 1s
Rated Busbar Current (A) 630 630
Rated CB Current (A) 630 400
Maximum Generator Power (MW)5 10.0 12.5
Rated Operating Sequence O - 0.3 s - CO - 3 min - CO
Number of Breaking Operations6 10,000
Switchgear Type GAS INSULATED (SF6)
Operating Temperature -25°C - +55°C
Standards IEC62271/AS3000/AS61000/AS3100
4 Only available for e-Cube Advanced and Pro models. 5 Indicative generation level only. Derating factors and safety margins have been applied. Other capacities available upon request. 6 At the rated current of the circuit breaker
CTP offers the e-Cube in the following models: Basic / Advanced / Pro
FEATURESBASIC ADVANCED PRO
Circuit Breaker Close Modes of Operation
Local via manualspring charge
Remote/local selector switchLocal via push-button
Remote via web interface
Auxiliary Power Supply 230VAC / 24VDC UPS Battery7
Protection
Type Siemens SIPROTEC 5 Platform – Model: 7SJ82
Communications N/A Ethernet TCP/IP8 Ethernet TCP/IP8
Installation Location LV compartment Secondary Panel Secondary Panel
RTU / HMI No No Yes8
Remote Access No Yes9 Yes
PQM No No Option
Revenue Metering VIC / NSW / QLD / SA compliant revenue metering panel / enclosure
MECHANICAL DETAILSBASIC ADVANCED PRO
Enclosure Type / IP Rating Outdoor rated / IP54 Outdoor rated / IP54 Outdoor rated / IP54
Dimensions ( L x W x H ) 2300 × 1200 × 2400mm3 3060 × 1170 × 2400mm3 3060 × 1170 × 2400mm3
Weight 1000 Kg 1200 Kg 1200 Kg
Separate LV Secondary Panel No Yes Yes
Space for Customer / DNSP equipment
No Yes Yes
Installation Type Concrete Pad10 Concrete Pad10 SKID Mounted
7 Minimum 8-hour autonomy time for e-Cube equipment only. Additional equipment may reduce autonomy time. 8 Modbus RTU, Modbus TCP, DNP3.0 and IEC61850 available upon request. 9 Remote access available with additional software – contact CTP for further information. 10 Concrete pad to be provided by others.
All specifications subject to change without notice. Clean Technology Partners assumes no liability for mistakes or printing errors. For latest information please contact Clean Technology Partners.
www.clean-tech.com.au I Tel: +61 (3) 9005 7371
Power System / Grid Connection Studies
Power System modelling is an inherent part of any grid connection process. Clean Technology Partners has invested heavily in software, knowledge and capability to deliver a solution that couples the engineering design with power system modelling.
This allows Clean Technology Partners to ensure that the performance seen in the power system modelling is achievable in the real-world. This is a very important component of the R2 model validation process and is an integral requirement in connecting to the power system. Clean Technology Partners has technical experts, extensive knowledge of NER/NSP requirements and the latest software packages. Studies are conducted in the following software packages:
Clean Technology Partners utilize advanced Python scripting and automation techniques to ensure the studies can be done effectively and efficiently. Clean Technoloogy Partners understand the need to move quickly in solar development and offer a turn-key grid connection solution saving time and money to allow you to connect and energise your project quicker and at lower cost.
Siemens PSS/e PowerFactorySiemens
PSS Sincal PSCAD SafeGrid
CTP Power System Studies
Steady-state StudiesVoltage AnalysisThermal Loading AalysisVoltage Fluctuation and Trip Studies
Plant Control Analysis Power Factor, voltage control and voltage droop control can be investigated to find the optimum solution for the plant and the network.
Power Quality AnalysisHarmonicsVoltage Flicker Voltage Unbalance
Dynamic StudiesNER Schedule 5.2 StudiesFault Ride-Through AnalysisControl System Performance / Controller Tuning
Short Circuit StudiesNormal and Contingency Scenario AnalysisSCR Analysis
Protection Studies Protection Settings & Co-ordination reports
Arc-Flash Studies Analysis of operator PPE and clearance requirements
Earthing StudiesSubstation & Inverter Station Earthing DesignSolar PV Field Earthing DesignLightning Protection System Design
HV Cable Sizing Analysis of required HV cable sizing based on installation and site conditions.
Established in 2011, CTP has provided engineering services for over 600MW of utility scale solar farms at all stages of the project lifecycle.
CTP’s Engineering Services for Utility Scale PV Projects
Recent Projects
Williamsdale Solar Farm (11.1MWp) – ACTClient: Impact Investment Group Pty Ltd
• EPC and O&M Technical Contract Schedules
• Owner’s and Lender’s (CEFC) Engineering Services
• Technical Support in Defects Liability Period
Dunblane Solar Farm (10.9MWp) – QLDClient: YD Projects
• High voltage electrical system design
• Protection study and settings report
• Earthing study and design
Swan Hill Solar Farm (19MWp) – VIC Client: Australian Solar Group
• Power system analysis and connection studies
Dingo Solar Farm (75MWp) – QLDClient: ESCO Pacific
• Power system analysis and connection studies
Chinchilla Baking Board Solar Farm (19.9MWp) – QLD Client: Impact Investment Group Pty Ltd
• Owner’s Technical Due Diligence (prior to investment decision)
• EPC and O&M Technical Contract Schedules
• Owner’s and Lender’s Engineering Services
Kelsey Creek Solar Farm Proserpine (60.5MWp) – QLDClient: KCSF Consortium
• Feasibility Study & Concept Design
• Grid Connection Application & NTS
• ARENA Bid Submission Management
Dareton Solar Park (3.7MWp) - NSWClient: Apuron GmbH
• Power system & connection studies
• HV Design and Earthing Design
• Protection study & settings report
• e-Cube
• Project Management
Capability Statement
CTP Solar Farm Engineering Services
Pre-Construction Construction Operation
• Feasibility Studies
• Concept Design
• Energy Yield Analysis
• Grid connection applications
• Power system studies
• Technical Due Diligence
• Owner’s/Lender’s Engineer• Detailed Design• Construction & Commissioning
management
• Remote monitoring / fault analysis
• Technical Support
• O&M support services
CTP has proven our ability to overcome a range of technical challenges on behalf of our clients, dismantling project roadblocks in the process. Recent projects include:
www.clean-tech.com.au I Tel: +61 (3) 9005 7371 I [email protected]