hp ersatzteile für designjet 1055cm - gedat spare parts

1 HP Ersatzteile für DesignJet 1055CM

+49 (0) 3723 / 6678 - 0

Air Pressurization System, Ink Supply Stat

1

2

Ref

1

2

Part Number

C6072-60015*

C6072-60387

Description

Ink Supply Station (ISS) - Has four slots for ink cartridges

Air pressurization system (APS) - Includes pump, valve, pressure sensor, and APS housing - Installed

under the ink supply station

Carriage Assembly, Cutter Assembly, Trailing Cable

3

1

2

* Artikel sind obsolete


+49 (0) 3723 / 6678 - 0

Ref

1

2

3

Part Number

C6072-69147

C6074-60404

C6074-60418

Description

Carriage assembly kit - Includes carriage, carriage height tool cutter assembly, and line sensor - Does

not include cable

Cutter assembly kit - Includes mounting hardware - Installed under carriage assembly

Carriage trailing cable kit - Includes cable, trailing cable clip, nye oil, cover cap, trailing cable ferrite,

ferrite holder

Carriage Motor, Carriage Belt, Encoder, Rollfeed

4

5

3

1

7

8

2 9

6

Ref

1

2

3

4

5

6

7

8

9

Part Number

C6074-60419

C6072-60149

C6072-60199

C6072-60198

C6072-60197

C6072-60158*

C6072-60155*

C6072-60156*

C6072-60157*

Description

Carriage motor - Includes pulley

Tensioner assembly - Includes pulley assembly, pulley spring, wedge, cutter actuator arm, and tensi-

oner housing

Cutter actuator arm

Carriage drive belt kit - Includes belt and oil

Encoder strip

Left roll feed module - Installed at top of left leg

Right roll feed module - Installed at top of right leg

Right roll feed brake - Installed in right roll feed module

Left roll feed brake - Installed in left roll feed module



+49 (0) 3723 / 6678 - 0

Center Guide and Media Sensor

2

1

Ref

1

2

Part Number

C6074-60401

C6072-60190*

Description

Center guide and media sensor (Guide is the full width of the plotter) - Mounts near the front platen

and center platen assemblies

Media sensor - Media sensor - Installed on the center guide

Clutch Assembly

1

Ref

1

Part Number

C6072-60151

Description

Clutch assembly - Includes lever, 2 gears, a spring, and the shaft that they ride on



+49 (0) 3723 / 6678 - 0

Drive Roller Gear and Miscellaneous ARSS Parts

1

1 2

2

2

Ref

1

2

Part Number

C6072-60191*

C6071-60155*

Description

Paper drive roller assembly - Includes drive roller, roller gear, and roller bracket

Automatic roll sheet switch (ARSS) parts kit - ARSS torsion spring, ARSS axle gear, ARSS switch lever

- Installed on left side of print chassis

Drive Roller, Drive Roller Guide, Media Guide Strip

1

3

2

Ref

1

2

3

Part Number

C6072-60191*

C6072-60163

C6072-60391

Description

Paper drive roller assembly - Includes drive roller, roller gear, and roller bracket

Drive roller guide (Guide is the full width of the plotter) - Includes the drive roller guide and media

guide strip - Mounts in front of the drive roller

Media guide strip - Installed between the drive roller and the drive roller guide



+49 (0) 3723 / 6678 - 0

Electronics Module and Plug-in Devices 8

7

1

2

5

3

6 4

Ref Part Number

J3111-69001

J3112-69001*

J3113A*

J3258-61031*

J4167-61001

J4169-61001*

2

3

4

5

6

7

8

J7934-61011

C6075-60005*

C6072-60176

C6074-60003

C6074-60004

C6074-60005

C6251A*

C6252A*

C6258A*

C6075-69269

C6072-60172

C6072-60171

C6072-69146*

Description

JetDirect 600N EIO internal print server 10Base-T, 10BASE-2, and LocalTalk LAN interface board - Has

one RJ-45, BNC, and 8-pin DIN connector - (J3111A)

JetDirect 600N EIO internal print server token ring LAN interface board - Has one RJ-45 and DB-9 con-

nector - JetDirect 600N EIO Internal Print Server (Token Ring) LAN Interface Board - Has One RJ-45

and DB-9 Connectors (J3112A)

JetDirect 600N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peri-

pheral EIO slot - The standard interface for the printer

External JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T

(RJ-45) LAN

JetDirect 610N token ring LAN interface board - DB-9 and RJ-45 connectors

JetDirect 610N internal print server (10Base-T and 100Base-TX) LAN interface board - Plugs into peri-

pheral EIO slot - Has a RJ-45 connector - Comes with software on CD-ROM and manual - Replacement

for J3113A Fast Ethernet LAN interface board

JetDirect 620n internal print server - 10BaseT and 100BaseTX LAN interface board - Plugs into peri-

pheral EIO slot - Has an RJ-45 connector -

3.2GB hard drive (DesignJet EIO Font/Print Job Storage)

DIMM cover - Covers the DIMM sockets in the electronics module

16MB EDO (Extended Data Output) DRAM DIMM memory module



16MB EDO (Extended Data Output) DRAM DIMM - For DesignJet 1000 series printers



Firmware DIMM (Revision A.01.13) - Mounts in the electronics module - RTL version

Right rear cover - Covers the end of the electronics module that is not near the DIMM cover

Left rear cover kit - Covers electronics module near the DIMM cover - Includes ferrite and clip

Electronics module - Contains power supply, main logic board and cooling fan



+49 (0) 3723 / 6678 - 0

Left Cover, Ink Tubes System, Window

4

5

6

2

1 3

Ref

1

2

3

4

5

6

Part Number

C6072-60167

C6072-60173

C6072-60164

C6074-60415

C6072-00001

C4704-00119

Description

Left cover - Covers the ink tube system and has a door to access the ink cartridges

Left trim - On the left arc

Lift-up viewing window

Ink Tube System - Includes setup printheads, ink collector, carrier clip, nye oil, ink supply station

housing foam

Nameplate - DesignJet 1050C

Adope PostScript label

Pinch Assembly

1



+49 (0) 3723 / 6678 - 0

Ref

1

Part Number

C6072-60009*

Description

Pinch assembly - Includes pinch cam, pinch rollers and springs

Printer Stand

5

4

1

3

2

Ref

1

2

3

4

5

Part Number

C6072-60183

C6072-60182

C6072-60184

C6072-60208

C6072-60185

Description

Printer stand tray - Mounted between the feet of printer

Foot assembly (includes casters) - Mounts to the bottom of the stand legs (two used)

Leg assembly - Side support for the printer - Does NOT include the foot assembly - (Two used)

Media bin - Between printer stand legs

Cross-brace - Brace that connects and supports the two stand legs



+49 (0) 3723 / 6678 - 0

Rear Covers 5

1

2

4

3

6

Description

Top cover - Covers the top of the print mechanism (Not the window)

Back cover - Includes blank serial number label

Rear platen assembly

Tail deflectors - (Three used)

Back EMC cover - Installs between the rear cover and the print mechanism

Rear cover mounting bracket kit - Includes left and right brack

Ref

1

2

3

4

5

6

Part Number

C6072-60168

C6072-60169

C6072-60186*

C6071-60148*

C6072-60170

C6072-60188

Right Cover and Front Panel Assembly

3 2

1 4



+49 (0) 3723 / 6678 - 0

Ref

1

2

3

4

Part Number

C6072-60165

C6072-60174*

C6072-60175*

C6074-60241

C6074-60242*

C6074-60243

C6074-60244

C6074-60245*

C6074-60246

C6074-60247

C6074-60248

C6074-60249

C6074-60250*

Description

Right cover - Includes front panel cable - Does not include front panel assembly or aerosol fan

Right trim - On the right arc

Front panel assembly - Includes front panel cable

Front panel overlay (English)

Front panel overlay (Korean)

Front panel overlay (Taiwanese)

Front panel overlay (German)

Front panel overlay (French)

Front panel overlay (Spanish)

Front panel overlay (Italian)

Front panel overlay (Japanese)

Front panel overlay (Portuguese)

Front panel overlay (Chinese)

Service Station, Vacuum Fan, Paper Motor

1

2

3

Description

Black printhead cleaner - Installed in spittoon

Cyan printhead cleaner - Installed in spittoon

Magenta printhead cleaner - Installed in spitt

Yellow printhead cleaner - Installed in spittoon

4

Ref

1

Part Number

C4820-60015*

C4821-60005*

C4822-60059*

C4823-60003*

C6074-60399

C6072-60159*

C6072-60160*

C6074-60400

2

3

4

Service station assembly - Includes drop detector assembly

Vacuum/aerosol fan assembly - Includes the fan and air flow guide - Mounts on the right side of the

printer chassis assembly

Paper drive motor - Includes helical drive gear and mounting bracket - Installed on right side of printer

chassis

Drop detector (sensor) assembly - Includes spittoon foam - Installed in service station assembly



+49 (0) 3723 / 6678 - 0

Spindle and Paper Path Parts

6

5

3

2

1

4

Ref

1

2

3

4

5

6

Part Number

C6072-60126

C6072-60154

C6072-60150*

C6072-60152

C6072-60162*

C6072-60161*

Description

E/A0 rollfeed spindle assembly - Includes end caps - (C6078A)

Entry roller - Large, long roller at front of printer

Automatic roll sheet switch (ARSS) assembly - Small, long roller and housing - Used to feed cut sheet

media

Handle for automatic roll sheet switch (ARSS) assembly - (Two used)

Front platen assembly - Long, curved item without rollers - Includes platen and screws

Center platen assembly - Includes overdrive rollers and screws



+49 (0) 3723 / 6678 - 0

Tubes Guide, Front Guide, Left and Right Arcs

4

3

1

2

Ref Part Number Description

1

2

3

4

C6072-60195

C6072-60194

C6072-60193

C6072-60192

Tube guide assembly

Front guide assembly (U-shaped) - Mounts in front of the tube guide assembly

Right arc assembly - Right arc assembly - Structure installed between the right cover and the printer

chassis

Left arc assembly - Left arc assembly - Structure installed between the left cover and the printer chassis

hp ersatzteile für designjet 1055cm - gedat spare parts

Documents