portable used fluid handling equipment and fuel caddies · portable used fluid handling equipment...

Portable used fluid handling equipment and fuel caddies

Collection equipment – pressurized (self-evacuating) . . . . . . 166Upright drains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166

Collection and transfer equipment – pump-assist . . . . . . . . . 168Upright drains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168Fluid evacuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170Truck drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172Pit drains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174Diaphragm pump evacuation kits . . . . . . . . . . . . . . . . . . . . . 176

Collection equipment – general . . . . . . . . . . . . . . . . . . . . . . . . 178Fluid evacuator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178Pedestal drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180Drum drains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 181Fluid evacuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

Fuel caddies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184

7

165

Portable used fluid handling equipment – collection equipment, pressurized (self-evacuating)

Used fluid collection equipment – pressurized (self-evacuating)

Pressurized (self-evacuating) used fluid collection equipment is common in many automotive service shops because the res-ervoirs can be evacuated quickly and cleanly without the need for external pumps or fluid transfer systems . When a reservoir is full, it’s typically rolled to a bulk storage access point, where compressed air is used to force the fluid out under pressure . All Lincoln self-evacuating models have a built-in regulator that reduces shopair pressure down to a safe level for evacuation as well as a backup safety valve to prevent over pressurization .

Upright drainsUpright drains have a portable configuration commonly used for collecting fluids under lift-mounted vehicles . All models feature a height-adjustable collection bowl and large reservoir with capacity for multiple fluid changes . A combination of two ball-bearing swivel casters and two fixed-axle wheels makes them portable and easy to maneuver . Once full, they can be rolled to a bulk stor-age location, where compressed-shopair is all that’s required to evacuate the reservoir .

Features:• Standard shopair connection fitting• Preset pressure regulator reduces inlet

pressure• Wire reinforced dispense hose with

J-hook nozzle• Volume level sight tube indicates fluid

level in reservoir• Height-adjustable telescoping bowl• Safety relief valve prevents

over-pressurization• Screen prevents debris from entering

reservoir

Model 3601 18 gallon (68 liter) used fluid drainDesigned as an affordable option for used fluid collection, model 3601 features all-steel construction and a 14 in . (355,6 mm) diameter funnel . Height is adjustable from 45 to 72 in . (1 143 to 1 829 mm) and the unit maneuvers on two 3 in . (76,2 mm) ball-bearing swivel casters and two 6 in . (152,4 mm) fixed-axle wheels .

Model 3614 20 gallon (75 liter) used fluid drainModel 3614 features a stable, low-profile tank design and large 18 in . (457,2 mm) offset bowl with metal filter screen . For evacuation, the tank can be pressurized by connecting a standard shopair hose, or by using a simple tire chuck . The height is easily adjustable by loosening and tightening a friction-style lock-ring, and a special tele-scoping tube design eliminates the need to extend the bowl during evacuation .

Model 3614

Model 3601

166

Portable used fluid handling equipment – collection equipment, pressurized (self-evacuating)

Self-evacuating upright drain technical data

Model 3601 3614 3624

Capacity 18 gal . (68,14 liter) 20 gal . (75,71 liter) 26 gal . (98,42 liter)Bowl diameter 14 in . (355,6 mm) 18 in . (457,2 mm) 18 in . (457,2 mm)Bowl configuration Center mount Offset Offset

Reservoir material Steel Steel PolyethyleneFront wheels (qty. 2) – swivel casters 3 in . (76,2 mm) 4 in . (101,6 mm) 4 in . (101,6 mm) Rear wheels (qty. 2) – fixed-axle 6 in . (152,4 mm) 6 in . (152,4 mm) 40 in . (1 016 mm)

Minimum height 45 in . (1 143 mm) 45 in . (1 143 mm) 53 in . (1 346 mm)Maximum height 72 in . (1 829 mm) 71 in . (1 803 mm) 79 in . (2 007 mm)Size 16 x 18 x 45 in .

(406 x 457 x 1 143 mm)18 x 28 x 45 in . (457 x 711 x 1 143 mm)

21 x 24 x 53 in . (533 x 610 x 1 346 mm)

Optional accessories

Model Name Description Compatible models

3610 Funnel extension Extends bowl diameter to 24 1/2 in . (0,62 meter)

3601, 3614, 3624 613, 3644

Model 3624 26 gallon (98 liter) plastic pressurized used fluid drainModel 3624 has a large 26 gallon (98 liter) reservoir molded from high-strength polyethylene for lighter weight, reduced corrosion, and lower risk of damage to surrounding vehicles . Large recesses for tool and filter storage are molded into the top and drain directly into the reservoir . The large 18 in . (457,2 mm) offset bowl includes a removable metal filter screen and second-ary debris screen .

Model 3624

Model 3610

7

167

Portable used fluid handling equipment – collection and transfer equipment, pump-assist

Pump-assisted used fluid collection and transfer systems are ideal for large multi-bay shops and applications or environments where movement is restricted . In these situ-ations, a strategically located diaphragm pump can be used to transfer fluids from the collection equipment to a remote stor-age location . This type of system reduces the risk of accidental spills and collisions, supports remote location of bulk storage tanks and increases productivity .

Upright drainsPortable upright drains are commonly used for collecting fluids under lift-mounted vehi-cles . All models feature a height-adjustable collection bowl and 20 gallon (75 liter) res-ervoir . A combination of two ball-bearing swivel casters and two fixed-axle wheels makes them portable and easy to maneuver . Pump-assist models feature a male camlock connector extending from the top of the res-ervoir for attaching to a diaphragm pump filter screen or other fluid transfer system .

Features• 3/4 in . male camlock connection for

connecting to fluid transfer system• Volume-level sight tube• Height-adjustable bowl• Screen prevents debris from entering

reservoir

Model 3618 20 gallon (75 liter) used fluid drainModel 3618 features a stable, low-profile tank design and large 18 in . (457 mm) offset bowl with metal filter screen . Bowl height is easily adjustable by loosening and tightening a friction-style lock-ring, and a special tel-escoping tube design eliminates the need to extend the bowl during evacuation .

Model 3617 20 gallon (75 liter) coolant drainModel 3617 offers the same features as model 3618, except the reservoir and bowl are painted green for clear visual identification of coolant.

Used fluid collection and transfer equipment – pump-assist

Model 3618

168


Pump-assisted upright drain technical data

Model 3617 – coolant (green) 3618 – used oil (red)

Capacity 20 gal . (75,71 liter) 20 gal . (75,71 liter)Bowl diameter 18 in . (457,2 mm) 18 in . (457,2 mm)Bowl configuration Offset Offset

Reservoir material Steel SteelFront wheels (qty. 2) – swivel casters 4 in . (101,6 mm) 4 in . (101,6 mm) Rear wheels (qty. 2) – fixed-axle 6 in . (152,4 mm) 6 in . (152,4 mm)

Minimum height 42 in . (1,067 meter) 42 in . (1,067 meter)Maximum height 68 in . (1,727 meter) 68 in . (1,727 meter)Size 18 x 28 x 42 in . (457 x 711 x 1 067 mm) 18 x 28 x 42 in . (457 x 711 x 1 067 mm)



3610 Funnel extension Extends bowl diameter to 24 1/2 in . (622,3 mm) 3617, 3618277208 Drain spigot Allows gravity drain from bottom of tank 3617, 3618276411 Camlock coupler 3/4 in . female camlock coupler x 3/4 in . female NPT 3617, 3618

244391 Dry-break fitting 3/4 in . male dry-break fitting 3617, 3618244390 Dry-break coupler 3/4 in . female dry-break coupler 3650277090 Camlock cap 3/4 in . camlock cap with chain 3617, 3618

Model 3610 Model 277208 Model 276411 Model 244391 Model 244390 Model 277090

7

169


Fluid evacuatorEvacuators utilize a powerful compressed-air operated venturi vacuum for quick evac-uation of fluid reservoirs . They are most commonly used to extract oil or transmis-sion fluid directly through the dipstick tube, eliminating the need to lift a vehicle and reducing the risk of spills . Pump-assist models feature a male camlock connector extending from the top of the reservoir for attaching to a diaphragm pump or other fluid transfer system .

Model 3650 20 gallon (75 liter) fluid evacuatorModel 3650 features a stable, low-profile tank design with two ball-bearing swivel casters and two fixed-axle wheels . Three flexible and two rigid wands are included, as well as dipstick tube adapters for BMW, Mercedes and Volkswagen brand vehicles .

Features• 3/4 in . male camlock connection for

connecting to fluid transfer system• 10 ft . (3 m) long wire-reinforced

evacuation hose • Volume-level sight tube• Vacuum-level gauge

Fluid evacuator technical data

Model 3650

Capacity 20 gal . (75,71 liter)Maximum air pressure 150 psi (10 bar)Minimum air pressure 90 psi (6 bar)

Maximum fluid temperature 176 °F (80 °C)Reservoir material SteelFront wheels (qty. 2) – swivel casters 4 in . (101,6 mm)

Rear wheels (qty. 2) – fixed-axle 6 in . (152,4 mm) Size 18 x 28 x 36 in . (457 x 711 x 914 mm)

Model 3650

170




277208 Drain Spigot Allows gravity drain from bottom of tank 3650276411 Camlock Coupler 3/4 in . female camlock coupler x 3/4 in . female NPT 3650244391 Dry-break Fitting 3/4 in . male dry-break fitting 3650244390 Dry-break Coupler 3/4 in . female dry-break coupler 3650

Standard accessories included with model 3650

Model Name

276751 Mercedes oil dipstick tube adapter276752 BMW oil dipstick tube adapter276753 Volkswagen oil dipstick tube adapter

276754 0 .20 in . (5 mm) diameter x 31 in . (790 mm) long flexible extraction wand (red)276755 0 .24 in . (6 mm) diameter x 31 in . (790 mm) long flexible extraction wand (clear)276756 0 .31 in . (8 mm) diameter x 31 in . (790 mm) long flexible extraction wand (yellow)

276757 0 .20 in . (5 mm) diameter x 31 in . (790 mm) long rigid extraction wand276758 0 .24 in . (6 mm) diameter x 31 in . (790 mm) long rigid extraction wand

Model 276751 Model 276752 Model 276753

Model 276754 Model 276755 Model 276756 Model 276757 Model 276758

Model 277208 Model 276411 Model 244391 Model 244390

7

171

Truck drainTruck drains feature a low-profile design for collecting used fluids under RVs, trucks and other off-road equipment, without the need for a lift or jack . A long T-handle extending from the front of the reservoir allows the user to conveniently maneuver the drain into position . Once full, the reservoir can be emptied by gravity or with the use of an external pump .

Model 84714 20 gallon (75 liter) truck drainModel 84714 features heavy-duty welded steel construction and a unique three-wheel design that allows the operator to steer the drain into position . A front port located at the bottom of the reservoir allows fluid to drain by gravity, while a second port located on the back is designed for evacuation using an external pump . Two internal baffles and a 2 in . (50,8 mm) wide lip around the top of the reservoir reduces splash during draining and movement .

Truck drain technical data

Model 84714

Capacity 20 gal . (75,71 liter)Overall height 8 .5 in . (216 mm)Ground clearance 3/4 in . (19 mm)

Reservoir material SteelFront wheels (qty. 1) – pivoting 4 in . (101,6 mm) Rear wheels (qty. 2) – fixed axle 6 in . (152,4 mm)

Drain ports 3/4 in . female NPTSize (handle not included) 36 x 23 .5 x 8 .5 in . (914 x 597 x 216 mm)

Features• Low profile design – only 8 1/2 in .

(216 mm) tall• Internal baffles and 2 in . (50,8 mm) wide

lip reduces splash• Removable metal screen keeps out parts

and debris• Dual female 3/4 in . NPT drain ports

Model 84714

172




4105 Evacuation kit 3/4 in . camlock kit for pump-assist evacuation through lower port 84714, 276411277208 Drain spigot Allows gravity drain through lower port 84714276411 Camlock coupler 3/4 in . female camlock coupler x 3/4 in . female NPT 277645

277645 Camlock fitting 3/4 in . male camlock fitting x 3/4 in . male NPT 84714, 276411277090 Camlock cap 3/4 in . camlock cap with chain 277645, 4105244391 Dry-break fitting 3/4 in . male dry-break fitting 84714

244390 Dry-break coupler 3/4 in . female dry-break coupler 244391

Model 277208 Model 276411



7

173


Pit drainsPit drains are designed for track-mounting in service pits or drive over applications . Two wheels extend from each side of the reservoir on axles that can be adjusted to fit varying track widths . Reservoirs have two opposing 3/4 in . NPT ports for connecting to an external evacuation pump and/or for connecting multiple drains in tandem . All models feature heavy-duty steel construc-tion with internal baffles to reduce splash and a removable steel debris screen .

Features• Four wheel and axle assemblies extend

and lock to fit varying track widths• Internal baffles reduce splash during

movement• Removable steel screen keeps out parts

and debris• Shutoff valve and 3/4 in . male camlock

connector with dust cap included

Model 3662 13 gallon (50 liter) pit drainFeatures a compact, low-profile design for applications with restricted clearance . Reservoir is made from drawn steel with rounded corners . A handle is welded to each end for improved maneuverability .

Model 84700 30 gallon (115 liter) pit drainLarge capacity welded steel reservoir glides smoothly on 4 in . (101,6 mm) diameter polyurethane wheels . Includes model 92572 removable splash shield to focus oil stream into reservoir .

Pit drain technical data

Model 3662 84700

Capacity 13 gal . (49,2 liter) 30 gal . (113,6 liter)Overall height 8 in . (203 mm) 9 .3 in . (236 mm)Track width 28 to 50 in . (711 to 1 270 mm) 36 to 49 .5 in . (914 to 1 257 mm)

Reservoir material Steel SteelWheel quantity 4 4Wheel diameter 2 in . (50,8 mm) 4 in . (101,6 mm)

Drain ports 3/4 in . male NPT 3/4 in . male NPTSize 32 .3 x 24 .5 x 8 in .

(820 x 622 x 203 mm)36 x 28 x 9 .3 in . (914 x 711 x 236 mm)

Model 84700

Model 3662


174



276411 Camlock coupler 3/4 in . female camlock coupler x 3/4 in . female NPT 277645244391 Dry-break fitting 3/4 in . male dry-break fitting 3662, 84700244390 Dry-break coupler 3/4 in . female dry-break coupler 244391



7

175

Diaphragm pump evacuation kits

Diaphragm pump kits provide a clean, safe method for evacuating used fluids from col-lection equipment such as portable drains and evacuators, and pumping it through an enclosed system to a remote storage tank . Any type of used fluid equipment fitted with a 3/4 in . camlock coupler can be easily con-nected to the pump and evacuated . Kits in-clude an air-operated double-diaphragm pump with wall-mount bracket, as well as all recommended air supply, fluid extraction and fluid discharge fittings, components and accessories .

Features• Premium air-operated double-diaphragm

pump for long maintenance free operation

• Large inlet T-strainer prevents debris from entering the pump

• Designed for use with all Lincoln pump-assist fluid collection equipment

• For diaphragm pump specifications († page 98).

Model 4100 1 in. UL-listed diaphragm pump evacuation kitFeatures 1 in . UL-listed aluminum double-diaphragm pump (model 85634), recom-mended for transferring flammable liquids including used oil, ATF fluid, diesel and kerosene .

Model 4102 1 in. non-UL diaphragm pump evacuation kitFeatures 1 in . non-UL aluminum double-diaphragm pump (model 85627), recom-mended for transferring non-flammable liq-uids including transmission fluid, coolant, and washer fluid .

Model 4104 1/2 in. non-UL diaphragm pump evacuation kitFeatures 1/2 in . non-UL aluminum double-diaphragm pump (model 85631), for trans-ferring non-flammable liquids including transmission fluid, coolant, and washer fluid .

Diaphragm pump evacuation kit technical data

Model 4100 4102 4104

Pump Model 85634 85627 85631 Description 1 in . (25,4 mm) 1 in . (25,4 mm) 1/2 in . (12,7 mm) Body material Aluminum Aluminum Aluminum Wetted or soft parts Buna-N Buna-N Buna-N Max. recommended air pressure 50 psi (3,4 bar) flammable liquids

125 psi (8,6 bar) others125 psi (8,6 bar) 100 psi (6,9 bar)

Suction connetor 3/4 in . female camlock 3/4 in . female camlock 3/4 in . female camlockDischarge outlet 3/4 in . male NPT 3/4 in . male NPT 3/4 in . male NPTAir inlet size 3/8 in . male NPT 3/8 in . male NPT 1/4 in . male NPT

Model 4100

Model 4104


176



276291 Camlock fitting 3/4 in . male camlock fitting x 3/4 in . female NPT 4100, 4102, 4104277645 Camlock fitting 3/4 in . male camlock fitting x 3/4 in . male NPT 4100, 4102, 4104277090 Camlock cap 3/4 in . camlock cap with chain 277291, 277645, 4105

273607 Ball valve 3/4 x 3/4 in . ball valve for backflow prevention 4100, 4102, 4104274879 Check valve 3/4 x 3/4 in . check valve for backflow prevention 4100, 4102, 41044105 Evacuation kit 3/4 in . camlock drain conversion kit 4100, 4102, 4104

84816 4-way valve Four port, two-position valve enables one pump to evacuate and dispense fluid from a single tank . Ports are 1 in . NPT .

4100, 4102, 4104

84815 Overfill warning valve For single-wall tanks and drums . Sounds whistle and shuts off air-supply when fluid rises above preset level . Requires connection to compressed air . 1/4 in . NPT air inlet and outlet ports .

4100, 4102, 4104

84824 Overfill warning valve For double-wall tanks . Sounds whistle and shuts off air-supply when fluid rises above preset level . Requires connection to compressed air . 1/4 in . NPT air inlet and outlet ports .

4100, 4102, 4104

4110 Dipstick evacuation kit Enables diaphragm pump to be used for fluid evacuation from reservoirs or through dipstick tube . Includes 10 ft . (3 m) suction hose, five evacuation wands and wand holder . For wand specifications († page 167).

4100, 4102, 4104

85257 Wall-mount bracket For use with 1/4, 1/2 and 1 in . diaphragm pumps (included with models 4100, 4102 and 4104) .

4100, 4102, 4104

Model 276291 Model 277645 Model 277090 Model 273607 Model 274879 Model 4105



7

177

Used fluid collection equipment – general

Model 3652 6 gallon (22 liter) fluid evacuatorCombines a compact, portable tank design with a powerful compressed-air operated venturi vacuum for quick, clean, and con-venient extraction of engine oil or transmis-sion fluid through the dipstick tube, or for other general fluid extraction needs . Three flexible and two rigid wands are included, as well as dipstick tube adapters for BMW, Mercedes, and Volkswagen brand vehicles . Tank is emptied by removing a wide-mouth cap and tilting to pour .

Features• Portable 6 gallon (22 liter) capacity

heavy-duty welded steel tank• 10 ft . (3 m) long wire-reinforced

evacuation hose• Rolls smoothly on two 5 in . (13 cm) fixed

axle wheels with rubber treads• Easy-to-read volume level sight tube• Vacuum level gauge

Model 3652 technical data

Model 3652

Capacity 6 gal . (22 liter)Maximum air pressure 150 psi (10 bar)Minimum air pressure 90 psi (6 bar)

Maximum fluid temperature 176 °F (80 °C)Reservoir material SteelWheels (qty. 2) – fixed-axle 5 in . (127 mm)

Size 14 x 14 x 29 .8 in . (356 x 356 x 757 mm)

Model 3652

Portable used fluid handling equipment – collection equipment, general

178

Standard accessories for model 3652

Model Name

276751 Mercedes oil dipstick tube adapter276752 BMW oil dipstick tube adapter276753 Volkswagen oil dipstick tube adapter

276754 0 .20 in . (5 mm) diameter x 31 in . (790 mm) long flexible extraction wand (red)276755 0 .24 in . (6 mm) diameter x 31 in . (790 mm) long flexible extraction wand (clear)276756 0 .31 in . (8 mm) diameter x 31 in . (790 mm) long flexible extraction wand (yellow)

276757 0 .20 in . (5 mm) diameter x 31 in . (790 mm) long rigid extraction wand276758 0 .24 in . (6 mm) diameter x 31 in . (790 mm) long rigid extraction wand




7

179

Model 3605 4.5 gallon (17 liter) pedestal drainThe combined light weight and slim size of model 3605 make it easy to position and maneuver under lift-mounted vehicles, and convenient to store in shops with limited space . The 13 in . (330,2 mm) diameter, 4 1/2 gallon (17 liter) capacity bowl has a hinged cover that extends to catch stream-ing oil . When full, the bowl is lifted off the stand and placed onto a specially designed adapter that opens a spring-actuated valve, allowing fluid to drain into a drum or storage tank . The stand has a quick-release latch that automatically locks at the desired height .

Features• Hinged lid opens to catch oil stream• Self-locking, quick-release height

adjustment latch• Spring-actuated drain valve• Includes automatic drain adapter for

containers with 2 in . bung opening

Pedestal drain technical data

Model 3605

Capacity 4 1/2 gal . (17 liter)Bowl diameter 13 1/2 in . (343 mm)Bowl configuration Center mount

Reservoir material SteelMinimum height 46 in . (1 168 mm)Maximum height 76 in . (1 930 mm)

Base diameter 18 in . (457 mm)

Standard accessories

Model Name Description

82460 Drain adapter Opens spring-actuated valve to allow fluid to drain from bowl . Fits containers with 2 in . bung openings .

83386 Bowl assembly 13 in . (343 mm) diameter, 4 1/2 gallon (17 liter) bowl with hinged lid and spring-acutated drain valve

Model 3605

Model 82460

Model 83386


180

Model 613DK

Model 3644

Includes drum

Drum not included

Drum drainsDrum drains utilize a standard 16 gallon/ 120 lb . (60 liter/54 kg) steel drum as a fluid reservoir . They have a portable upright con-figuration commonly used for collecting flu-ids under lift-mounted vehicles . All models include a collection bowl, lid assembly with fluid level gauge and height-adjustable tube, and 17 in . (432 mm) square base with four 2 1/2 in . (63,5 mm) ball-bearing swivel cast-ers . Drains can be emptied using a gravity spigot (included with model 613DK) or pump-assist evacuation kit 247748 (sold separately) .

Features• Simple yet durable heavy-duty steel

construction• Volume level indicator• Height-adjustable from 42 to 68 in .

(1 067 to 1 727 mm)• Models available with and without drum

Model 613DK 16 gallon (60 liter) drum drainComplete drum drain kit including 16 gallon/ 120 lb . (60 liter/54 kg) steel drum, 14 in . (355,6 mm) diameter drain bowl, and gravity spigot .

Model 613 16 gallon (60 liter) drum drainSame as 613DK except without drum . User must supply standard 16 gallon/120 lb . (60 liter/54 kg) drum and drain spigot .

Model 3644 16 gallon (60 liter) drum drainSame as model 613 except with 20 in . (508 mm) diameter steel drain bowl . User must supply standard 16 gallon/120 lb . (60 liter/54 kg) drum and drain spigot .

Drum drain technical data

Model 613DK 613 3644

Capacity 16 gal . (60 liter) 16 gal . (60 liter) 16 gal . (60 liter)Bowl diameter 14 in . (355,6 mm) 14 in . (355,6 mm) 20 in . (508 mm)Drum included Yes No No

Wheels (qty. 4) – swivel caster 4 in . (101,6 mm) 4 in . (101,6 mm) 4 in . (101,6 mm) Minimum height 42 in . (1 067 meter) 42 in . (1 067 meter) 42 in . (1 067 meter)Maximum height 68 in . (1 727 mm) 68 in . (1 727 mm) 68 in . (1 727 mm)

Size 17 x 17 x 42 in . (432 x 432 x 1 067 mm)

17 x 17 x 42 in . (432 x 432 x 1 067 mm)

17 x 17 x 42 in . (432 x 432 x 1 067 mm)


7

181



91197 14 in . (356 mm) diameter bowl Standard on models 613 and 613DK; optional on model 3644 613, 613DK, 364482786 14 in . (356 mm) diameter bowl with lid Includes hinged lid with latch 613, 613DK, 36443608 20 in . (508 mm) diameter bowl Standard on model 3644; optional on models 613 and 613DK 613, 613DK, 3644

66493 16 gallon/120 lb . (60 liter/54 kg) drum Steel drum with 1 in . NPT port for drain spigot . Standard on model 613DK; optional on models 613 and 3644

613, 613DK, 3644

70526 Drain spigot Gravity drain spigot with 1 in . male NPT . Standard on model 613DK; optional on models 613 and 3644

613, 613DK, 3644

247748 Diaphragm pump evacuation kit Includes fluid pick-up tube and 3/4 in . male camlock fitting for connection to diaphragm pump or other fluid transfer system . Installs to lid so that fitting extends straight up

613, 613DK, 3644



Model 615 suction gunHolds up to 18 oz . (532 cm3) of fluid . Flex-ible nozzle for transmission, differential or oil filter service . Precision follower fitted to barrel for superior suction and is impervious to oil, grease and water . Finished in rust- resistant, powder coated blue paint .

Model G150 suction gun17 oz . (503 cm3) capacity with 12 in . (304,8 mm) flex hose . Perfect for draining and filling differentials, clutches, power steering reservoirs and transmissions . Needs no priming . Features heavy-duty steel barrel, electro-static, corrosion-resist-ant finish and non-slip knurling .

Model G150

Model 615


182

Model MV7400Fluid evacuator features• Convenient manual or compressed air

pump operation• Integrated reservoir• Large base with foot stabilizer• Durable, chemical-resistant polyethylene

construction• Automatic overflow prevention• Quick-drain pour spout

Model MV7400 fluid evacuatorVacuum is created quickly and efficiently by manual pump operation, offering superior mobility by eliminating the need for electric-ity or compressed air . The MV7400 is ideal for draining fluids from reservoirs on boats, RVs, ATVs, snowmobiles, farm equipment or motorcycles . Includes accessories for drain-ing engine oil or transmission fluid directly through the dipstick tubes .

Model MV7201 fluid evacuator plusAt the push of a button, this versatile unit changes from vacuum to pressure for evac-uating or dispensing fluids . This functionality makes it ideal for draining tanks or reser-voirs then pumping the used fluid back out for easy disposal . Multiple units work great – simply evacuate used fluids with one unit and then quickly refill with new fluid from a second . For superior mobility, the MV7201 utilizes a manual pump, so compressed air or electricity is not required . Accessories are included for draining engine oil or transmis-sion fluid directly through the dipstick tubes .

Model MV7201Model MV7300 PneumatiVacOperates on compressed air to create a powerful venturi vacuum for draining fluids from tanks and reservoirs . Compressed air hose attaches at base for stability . Includes accessories for draining engine oil or trans-mission fluid directly through the dipstick tubes . Also includes brake/clutch bleeding kit (model MVA7205) for vacuum bleeding hydraulic brake and clutch systems .

Model MV7300

Fluid evacuator technical data

Model MV7400 MV7201 MV7300

Reservoir capacity 1 .9 gal . (7,3 liter) 2 .3 gal . (8,8 liter) 2 .3 gal . (8,8 liter)Maximum operating temperature 175 °F (80 °C) 175 °F (80 °C) 175 °F (80 °C)Packaged weight 7 .5 lbs . (3,4 kg) 10 .0 lbs . (4,5 kg) 7 .5 lbs . (3,4 kg)

Compressed air inlet size – – 1/4 in . NPTSize (height x width x depth) 25 x 7 .5 in . (height x diameter)

(635 x 190 mm [height x diameter])24 x 12 .4 x 9 .3 in . (610 x 315 x 235 mm)

24 x 12 .4 x 9 .3 in . (610 x 315 x 235 mm)


7

183

Portable used fluid handling equipment – fuel caddies

Model 3675

184

Fuel caddies

Fuel caddies are designed for the safe trans-fer and storage of fuel before, during and after repairs requiring the removal of a ve-hicle’s fuel tank . They feature a portable yet stable, upright configuration and robust steel construction . Fuel is transferred using a bi-directional manual rotary pump in-stalled on a leak-tested 25 gallon (95 liter) welded-steel reservoir . A 7 ft . (2.1 m) long wire-reinforced hose extending from the caddy can be snaked down the fill-er neck or through an alternative opening in the fuel tank . Additional features include an internal volume-level sight gauge, fire-screened vent cap, anti-spark aluminum skid pads, two 8 in . (203 mm) diameter rub-ber wheels, manual pour-in filler neck and safety ground wire .

Fuel is extracted or dispensed by turning the pump handle in forward or reverse directions .

Features• Premium 2-way rotary pump dispenses

fuel at a rate of 1 gallon (4 liters) per 12 revolutions

• Specially designed for use with unleaded gasoline, kerosene and diesel fuels

• 100% leak-tested welded-steel tank• Portable, tilt-to-roll design requires mini-

mal floor space

Model 3675 25 gallon (95 liter) fuel caddyDesigned for safety and convenience, tanks are 100% leak tested, while special compo-nents keep the unit grounded to reduce the risk of spark and fire . A fire-screened vent cap prevents pressurization .

Model 3677 25 gallon (95 liter) fuel caddy with 2-way filterSame as model 3675, but includes 2-way filter system to prevent fuel recontamina-tion . The filter system (model 3612) installs under the handle and uses check valves to direct the flow of fuel in and out of the tank through two independent spin-on style fil-ters . Filters are replaceable, standard 3/4 in . spin-on canister style .

Model 3677

Fuel caddy technical data

Model 3675 3677

Capacity 25 gal . (95 liter) 25 gal . (95 liter)Reservoir material Steel SteelPump output – revolutions/gal. (liter) 12 12

Wheels (qty. 2) 8 in . (203 mm) diameter 8 in . (203 mm) diameterHose length 7 ft . (2 134 mm) 7 ft . (2 134 mm) Size 22 .5 x 20 .5 x 44 in . (572 x 521 x 1 118 mm) 22 .5 x 20 .5 x 44 in . (572 x 521 x 1 118 mm)


Model Name Description Compatible with

3612 2-way filter system Filters fuel through independent replaceable filters . Standard on model 3677; optional on model 3675

3675, 3677

277464 Replacement filter 1 in .-12 UNF spin-on style fuel filter, 3/4 in . (19 mm) opening 3612, 3677


Portable used fluid handling equipment – fuel caddies

7

185

portable used fluid handling equipment and fuel caddies · portable used fluid handling equipment...

Documents