protecto premium energy sill sealer...• keep protecto energy sill sealer in a warm heated space...

2
• A full width self-adhering membrane with a 3/8" foam layer that is 50% thicker than ordinary loose laid sill sealers • Forms a tight gasket on both vertical and horizontal surfaces • Increases energy-efficiency and keeps insects and rodents out of the building • Thick foam layer conforms to irregular surfaces at the sill to prevent air infiltration over the life of the structure - allows for movement and shrinkage of plate over time • Helps pass the blower door test • Self adhering allows for product to stay in place even in windy conditions and allows for vertical application without fasteners • Exceeds building codes • Will not rot or deteriorate with age • Adheres to concrete, wood and metal framing Protecto PREMIUM ENERGY SILL SEALER ® 10 Year Limited Warranty

Upload: others

Post on 23-Jan-2021

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Protecto PREMIUM ENERGY SILL SEALER...• Keep Protecto Energy Sill Sealer in a warm heated space above 50ºF before use. • Prime the top of the foundationwith #100 Primer* and allow

• A full width self-adhering membrane with a 3/8" foam layer that is 50% thicker than ordinary loose laid sill sealers

• Forms a tight gasket on both vertical and horizontal surfaces

• Increasesenergy-efficiencyandkeepsinsectsandrodentsoutof the building

•Thickfoamlayerconformstoirregularsurfacesatthesilltoprevent airinfiltrationoverthelifeofthestructure-allowsformovement andshrinkageofplateovertime

•Helpspasstheblowerdoortest

•Selfadheringallowsforproducttostayinplaceeveninwindy conditionsandallowsforverticalapplicationwithoutfasteners

• Exceeds building codes

• Will not rot or deteriorate with age

• Adheres to concrete, wood and metal framing

ProtectoPREMIUM ENERGY

SILL SEALER®

10 Year Limited Warranty

Page 2: Protecto PREMIUM ENERGY SILL SEALER...• Keep Protecto Energy Sill Sealer in a warm heated space above 50ºF before use. • Prime the top of the foundationwith #100 Primer* and allow

APPLICATION:Areas to be sealed must be clean and dry. Knock off and remove any rough or jagged edges. Protecto PremiumEnergySillSealershouldbeplacedflushwiththeoutsideperimeterofthefoundation.Peeloffthepaperreleasebackingandbeginrollingorpressingtheadhesivebottomontothetopofthefoundationwall.

Use Universal Water Based Primer on ICF

Shouldyouhavere-baroranchorboltscomingoutofthefoundation,simplymakean“X”cutinthebackofProtectoPremiumEnergySillSealerandslideovertheprotrusionpressingfirmlyinplace.Allbuttjointsshouldbetapedwitha4"widepieceofUniversalPrimerFreeMembrane.

INSTALLATION BELOW 40°:•KeepProtectoEnergySillSealerinawarmheatedspaceabove50ºFbeforeuse.

•Primethetopofthefoundationwith#100Primer*andallowprimertotackup.Donotcoverwetprimer.Donotuse#100PrimeronICF.

•PeelandsticktheProtectoEnergySillSealerinplace.

*Note:ProtectoWrapProtecto-Tak13oz.sprayadhesivemaybeusedinplaceof#100Primer.

ProtectoPREMIUM ENERGY

SILL SEALER®

AVAILABLE SIZES31/2", 51/2" x 25'

PESS-200 (6-20)

OTHER ENERGY SAVINGS PRODUCTS

Itsuniqueflangeactslikeagasket,sealingoffthesub-floorandpreventingairandmoistureinfiltrationunderthethreshold.Helpskeepthedoorframefromrackingandthesub-floorfromswellingandwarping.

Designedspecificallyforconformingandsealingoffairgapsbetweenthefloordeckandtheexteriorwallplates.The1/4"closedcellfoamformsagasketsealbeneaththeexteriorwallplatevirtu-

ally eliminating any air drafts resulting in a large amount of HVAC energy savings.

Acoldappliedself-adheringmembranecomposedofa3/8"closed cell foam gasket laminatedwithtwopeelandstickflapsthatseal to the foundation and to the exterior framed wall assembly.

PROTECTO TRIPLE GUARD ENERGY SILL SEALER®PROTECTO DUAL GUARD THRESHOLD TAPE™

PROTECTO ENERGY PLATE LINER®

Protecto Wrap Company1955S.CherokeeStreet•Denver,CO80223(800)759-9727•www.ProtectoWrap.com