sanitary systems · 2019. 11. 6. · 4 for decades, oli has been developing and producing sanitary...

SANITARYSYSTEMS

SANITARYSYSTEMS

A_79/1

Area agent

INDEX - THE COMPANY 2

- RESEARCH DEVELOPMENT AND INNOVATION 4

- WATER SAVING 5

- DELAYED INLET VALVE SYSTEM 6

- WATER EFFICIENCY CERTIFICATION 7

- THE MARKETS 8

- HIDROBOOST 14

- QR-INOX SANITARY MODULE 18

- QR-BOX SANITARY MODULE 22

- EASY MOVE ADJUSTABLE FRAME 24

- HAPPY AIR SYSTEM 26

- IN-WALL FLUSH CISTERNS 30

- OLI74 PLUS 32

- EXPERT EVO 34

- EVO 330 36

- OLI120 PLUS 38

- QUADRA 40

- FRAMES 44

- CONTROL PLATES 50

- COMPATIBILITY 62

- CODES 64

2

Since it was founded in 1954, the Company has continuously renewed and improved its products, thus earning itself a position of prestige and credibility in international circuits.

The quality and reliability of its products and its ability to supply a rapid and efficient after-sales service are the basis of the success that OLI has constructed by adopting a rigorous and methodical work approach.

THE COMPANY

3

OLI is part of the Fonditalgroup, an industrial reality experiencing continuous growth and becoming increasingly competitive in international markets where it has been leader for over 30 years in the heating sector, in the fusion of aluminium alloys and in the plumbing systems sector.

Specifically, OLI produces and markets items for heating and plumbing systems and is a benchmark in the production of flush cisterns, bathroom systems, mechanisms and components for ceramic cisterns.

4

For decades, OLI has been developing and producing sanitary installation systems aimed at innovation.The dual flush cistern and the inlet valve were two major inventions. Currently, OLI is a point reference: it has over 40 active patents in Europe, resulting from a continuous investment in Research and Development and from the constant challenge of water sustainability.Its know-how is acknowledged by its means, its technologically advanced resources and established partnerships with both universities and research centres.

In its factory in Aveiro, OLI controls the value chain: there, the idea emerges, the mould is produced, production takes place and the product is marketed in over 60 countries throughout the five continents.The rising importance of contemporary design, as well as, the incorporation of new technologies and materials, clearly shown in the solutions presented in this catalogue, reaffirms OLI as a brand of excellence.

Quality and Certifications

RESEARCH,DEVELOPMENTAND INNOVATION

Product Certifications

It’s our brand image, which is a huge competitive advantage and allows us a fierce competitiveness and subsequent adaptation to the market.We have a multidisciplinary team, provided with means and technologically advanced features, entirely dedicated to product development. With strong partnerships in academic and industrial, we studied the injection process allowing us to anticipate the production and operation of our products.

Supported on the central pillar that is for us to innovation, provide the most suitable solution for the needs of each client. As the knowledge base of the generation of wealth in advanced societies and research and development one of the pillars of creation of this knowledge, it is innovation that is how to transform this knowledge into economic development.All the effort dedicated to the search for innovative solutions, recognized by APCER which he attributed to the OLI Certification Management Systems Research, Development and Innovation.

CER

T IFIE

D B Y M . B .

DE PT FR AU

UK NL CH ZA

WSVGWSSIGE

CER

T IFIE

D B Y M . B .

DE PT FR AU

UK NL CH ZA

WSVGWSSIGE

55

WATER SAVING

The bathrooms represent about 32% of the housing water consumption.To decrease it, the amount of Water used should be limited.According to the intakes housing water, we estimate that the use of OLI mechanism with Water saving feature results in 2% savings on the monthly water bill for a family. Savings are more evident when we talk about public areas, such as in a hotel with 100 rooms.It is estimated that reducing the Annual water consumption through the use of OLI Sanitary Installation Systems equipped with dual flush systems (6-3 liters) results in yearly saving exceeding 30% per year.

Flush9/4,5 l

FlushOLI 6/3 l

1,400,000 l

1,200,000 l

1,000,000 l

800,000 l

600,000 l

400,000 l

200,000 l

0 l

100 ROOMS

Annual water consumption in hotels with 100 roomswith an average of 4 flushes per day

Water used

Water saved

Water saving withdelayed inlet valve

Waste of water withstandard inlet valve

HOTEL

FlushOLI 4.5/3 l

6

Currently, the saving of water resources takes on crucial importance in our everyday lives and, also in order to help people decrease their water bill, OLI developed the Azor Plus inlet valve, a water-saving solution that equips the latest models of OLI cisterns. In this catalogue you will find OLI74 PLUS In-wall cisterns which is equipped with the Azor Plus inlet valve.This inlet valve saves up to 9 litres of water per day, which equals to a 2% water bill reduction.The decreased consumption of water is due to the delayed refilling of water in the cistern, which prevents it from filling while the flush valve is opened, thus avoiding water waste during the flush of water to the sanitaries.Thus, filling only begins after closing the flush valve and all water flushed is efficiently used for cleaning the toilet.This inlet valve is not only ecological, but also quiet, and, thus, certified by the NF standard, acoustic class 1.It is a versatile product with reduced dimensions, counter pressure closing system, quick filling and effective operation at any network pressure.

DELAYED INLET VALVE SYSTEM

SAVE UP TO 9 L WATER/DAY

Operation mode

During �ushing, the inlet of water into the cistern is completely

inhibited.

Once the �ush has beencompleted, the outlet valve closed

o� the out�ow of water and the �oat valve starts �ling.

FLO

AT M

ECH

AN

ISM

IN T

HE

CLO

SED

PO

SITI

ON

FULL

FLU

SHH

ALF

FLU

SH

7

The efficient use of water is an environmental imperative in all countries worldwide: work needs to be done urgently in this field because the availability of water could be significantly reduced in the short/medium term.This environmental awareness led ANQIP (National Association for Quality in Building Installations) to launch a certification and labelling system for product water efficiency in Portugal. This initiative will be the answer to a crucial necessity for urgent actions to guarantee, in the near future, the much desire and indispensable conditions for environmental sustainability.

The certification and labelling system for product water efficiency allows consumers to recognize the water efficiency of all products. This system consists in classifying cisterns into various categories, from “E” (least efficient) to “A” (most efficient).Cisterns that fall into category “A” guarantee not only the best water efficiency but also an effective cleaning of the toilet bowl. OLI supplies several cisterns that are class “A” certified for water efficiency. All these cisterns have a maximum flush volume of 6 litres and are supplied with a dual flush system that allows the user to employ the most adequate quantity of water at each flush.

OLI74 PLUS is a concealed cistern developed and produced by OLI, a proposal environmentally responsible that excels in ease and installation versatility.Each component was developed with the purpose of adding value to the user. One of its most innovative features is the delayed opening system inlet valve which, as displayed aside, allows greater water saving compared to other existing cisterns in market.Developed thinking of a sustainable use of water, OLI74 PLUS can flush the water out with enough speed to allow efficient cleaning with a complete discharge of only 4,5 liters and half discharge of 3 liters, thus obtaining a classification level A + water efficiency.

WATER EFFICIENCY CERTIFICATION

WHY IT IS IMPORTANT TO BE CLASS “A” CERTIFIED

OLI IS CLASS “A”

8

THE MARKETS

Europe - Malta Hospital (Birkirkara, Malta)

- Osbourne Hotel (Valletta, Malta)

- Victoria Hotel (Sliema, Malta)

- Hilton Hotel (Malta)

- Dragonara Gaming Ltd Casino (Malta)

- Hotel 3K Faro airport (Faro, Portugal)

- Hotel Music (Porto, Portugal)

- Hotel Memmo Alfama (Lisbon, Portugal)

- Holiday Inn express Lisbon (Lisbon, Portugal)

- Ozadi Tavira Hotel (Tavira, Portugal)

- Holiday Inn Express Alfragide (Lisbon, Portugal)

- Turim Av Liberdade Hotel (Lisbon, Portugal)

- Terra Nostra Garden Hotel (Portugal)

- Inspira Santa Marta Hotel & SPA (Lisbon, Portugal)

- Hotel Carris Porto Ribeira (Porto, Portugal)

- Salgados Grande Hotel (Portugal)

- Fonte Cruz Lisboa Hotel (Lisbon, Portugal)

- Júpiter Lisboa Hotel (Lisbon, Portugal)

- Hotel Ibis Coimbra (Portugal)

- Monte Da Quinta Resort (Portugal)

- Morgado Golf Hotel (Portimão, Portugal)

- Estoril Sol (Estoril, Portugal)

- Torre de Palma, Wine Hotel (Monforte, Portugal)

- Conrad, Palácio Valverde & SPA (Portugal)

- Hotel Abacus (Budapest, Hungary)

- Grande Bretagne Hotel (Athens, Greece)

- Hilton Hotel (Athens, Greece)

- Opera House (Athens, Greece)

- Electra Palace Hotel (Thessaloniki, Greece)

- Hyatt (Moscow, Russia)

- Rogaska Spa (Rogaska, Slovenia)

- Bellevue Hotel (Maribor, Slovenia)

- Cagliari Airport (Cagliari, Italy)

- Hilton Hotel (Portorosa, Italy)

- Golf Club Resort Monasteri (Siracusa, Italy)

- Crown Plaza Prague Castle Hotel (Prague, Czech Replublic)

- Prague Imperial Hotel (Prague, Czech Replublic)

Africa - Alvalade Residence Luanda (Angola)

- Cascade Resort (Lagos, Nigeria)

- Intercontinental Heliopolis (Cairo, Egypt)

- The Wanderers Golf Club (Johannesburg, South Africa)

- Sandton Oncology Medical Centre (Johannesburg, South Africa)

Europe- Malta Hospital (Birkirkara, Malta)

- Osbourne Hotel (Valletta, Malta)

- Victoria Hotel (Sliema, Malta)

- Hilton Hotel (Malta)

- Dragonara Gaming Ltd Casino (Malta)

- Hotel 3K Faro airport (Faro, Portugal)

- Hotel Music (Porto, Portugal)

- Hotel Memmo Alfama (Lisbon, Portugal)

- Holiday Inn express Lisbon (Lisbon, Portugal)

- Ozadi Tavira Hotel (Tavira, Portugal)

- Holiday Inn Express Alfragide (Lisbon, Portugal)

- Turim Av Liberdade Hotel (Lisbon, Portugal)

- Terra Nostra Garden Hotel (Portugal)

- Inspira Santa Marta Hotel & SPA (Lisbon, Portugal)

- Hotel Carris Porto Ribeira (Porto, Portugal)

- Salgados Grande Hotel (Portugal)

- Fonte Cruz Lisboa Hotel (Lisbon, Portugal)

- Júpiter Lisboa Hotel (Lisbon, Portugal)

- Hotel Ibis Coimbra (Portugal)

- Monte Da Quinta Resort (Portugal)

- Morgado Golf Hotel (Portimão, Portugal)

- Estoril Sol (Estoril, Portugal)

- Torre de Palma, Wine Hotel (Monforte, Portugal)

- Conrad, Palácio Valverde & SPA (Portugal)

- Hotel Abacus (Budapest, Hungary)

- Grande Bretagne Hotel (Athens, Greece)

- Hilton Hotel (Athens, Greece)

- Opera House (Athens, Greece)

- Electra Palace Hotel (Thessaloniki, Greece)

- Hyatt (Moscow, Russia)

- Rogaska Spa (Rogaska, Slovenia)

- Bellevue Hotel (Maribor, Slovenia)

- Cagliari Airport (Cagliari, Italy)

- Hilton Hotel (Portorosa, Italy)

- Golf Club Resort Monasteri (Siracusa, Italy)

- Crown Plaza Prague Castle Hotel (Prague, Czech Replublic)

- Prague Imperial Hotel (Prague, Czech Replublic)

Africa- Alvalade Residence Luanda (Angola)

- Cascade Resort (Lagos, Nigeria)

- Intercontinental Heliopolis (Cairo, Egypt)

- The Wanderers Golf Club (Johannesburg, South Africa)

- Sandton Oncology Medical Centre (Johannesburg, South Africa)

Middle East - World Trade Centre (Abu Dhabi, United Arab Emirates)

- Rotana Beach Hotel (Abu Dhabi, United Arab Emirates)

- Conference Palace Hotel (Abu Dhabi, United Arab Emirates)

- Etihad Tower (Abu Dhabi, United Arab Emirates)

- Al Raha Gardens (Abu Dhabi, United Arab Emirates)

- Ritz Carlton (Dubai, United Arab Emirates)

- Cultural Centre Building (Dubai, United Arab Emirates)

- Shangri - La Hotel & Apartments (Dubai, United Arab Emirates)

- Novotel World Trade Centre (Dubai, United Arab Emirates)

- Ibis World Trade Centre (Dubai, United Arab Emirates)

- Saudi German Hospital (Saudi Arabia)

- Al Corniche Hotel (Jeddah, Saudi Arabia)

- Le Meridien Towers (Mecca, Saudi Arabia)

- Daquum Project (Oman)

- Wave project (Oman)

- Movenpick Resort (Beirut, Lebanon)

- Martinez Hotel (Beirut, Lebanon)

- Dunes Holiday Inn (Beirut, Lebanon)

- Takaya Hotel (Beirut, Lebanon)

- Casino du Liban (Jounieh, Lebanon)

- Grand Serail (Beirut, Lebanon)

- Metropolitan Hotel (Beirut, Lebanon)

- Serail Hills-Solidere (Beirut, Lebanon)

- Summerland Hotel (Lebanon)

- Jyieh Marina Resort (Lebanon)

- Ouwaida Bldg (Lebanon)

- Mowasat Hospital (Kuwait)

- Dhow Tower (Kuwait)

- Al-Sheikh Jaber International Stadium (Kuwait)

- Crowne Plaza Hotel (Amman, Jordan)

- Chinese Centre and Mall (Amman, Jordan)

- Amwal Tower (Doha, Qatar)

- Al-Jazeera Tower (Doha, Qatar)

- Al-Dana Tower (Doha, Qatar)

Oceania - Hilton Hotel (Auckland, New Zealand)

Asia - Kowloon Hotel (Shanghai, China)

- Marriott Hotel (Mumbai, India)

- Seaside Properties (Mumbai, India)

- Intercontinental New Delhi (New Delhi, India)

- Rasa Sayang Shangri-La Hotel (Penang, Malaysia)

Markets such as Australia, Egypt, Holland, UK, France, Germany, Greece, Honk Kong, UAE, Russia, Saudi Arabia, Spain, Oman, Lebanon, Japan, South Africa, New Zealand, Iran, India, Brasil, Vanezuela, Chile, Mexico, Colombia, Perù, Norway, Finland, Denmark and many others, recognize OLI as a brand of excellence both in term of quality and design. The strength of our brand is also certified by the long list of projects worldwide where OLI is specified and installed:

99

Europe

Golf Club Resort Monasteri (Syracuse, Italy)

AWARDED PROJECTS

Dragonara Gaming Ltd Casino (Malta)

Estoril Sol (Estoril, Portugal)

Electra Palace Hotel (Thessaloniki, Greece)

Bellevue Hotel (Maribor, Slovenia)

Hotel Abacus (Budapest, Hungary)

10

Middle East

Mowasat Hospital (Kuwait)

Al-Dana Tower (Doha, Qatar)

Metropolitan Hotel (Beirut, Lebanon)

Crowne Plaza Hotel (Amman, Jordan)

Le Meridien Towers (Mecca, Saudi Arabia)

Etihad Tower (Abu Dhabi, United Arab Emirates)

1111

Saudi German Hospital (Saudi Arabia)

Al-Jazeera Tower (Doha, Qatar)

Ritz Carlton (Dubai, United Arab Emirates)

World Trade Centre (Abu Dhabi, United Arab Emirates)

Al Corniche Hotel (Jeddah, Saudi Arabia)

Rotana Beach Hotel (Abu Dhabi, United Arab Emirates)

12

Africa

Alvalade Residence Luanda (Angola)

Intercontinental Heliopolis (Cairo, Egypt)

The Wanderers Golf Club (Johannesburg, South Africa)

Hotel IU (Angola)

1313

Hilton - (New Zealand)

Oceania

Asia

Rasa Sayang Shangri-La Hotel (Penang, Malaysia)

Intercontinental New Delhi (New Delhi, India)

Marriott Hotel (Mumbai, India)

Radiance Apartment (Sydney, Australia)

14

The Hydroboost technology developed by OLI enables energy to be generated as water enters the cistern and the supply of a system of energy accumulation for the electronic activation of the self-sufficient dual flush in energy terms.

The activation system of the dual flush in cisterns equipped with the Hydroboost system is carried out with a Touch free activation through capacitive sensors.

All it takes is the approach of a hand for the flush to be activated through the power of a clean energy.With a continuous power consumption of only 3.3 mW, the energy generated every second by the Hydroboost system is 38 times greater than the instant consumption of the system that accumulates power for over 30 days with no use.

HidroboostThat is, in case of prolonged absence, the smart control system of the cistern automatically flushes for self-refilling.

The use of this technology requires no connection with energy or the replacement of batteries, because when harnessing the energy of water in motion, it generates and stores energy that afterwards will be used to activate the flushes.

In this catalogue you will find this technology applied to the Moon Ceramic plate, Glassy plate and QR-INOX.

15

03

01

02

04

CLEAN ENERGY

The water enters the cistern to fill it;

That water passes through the hydro generator that harnesses this movement to generate and accumulate the energy until the closure of the inlet valve;

This energy supplies a capacitive sensor which, in addition to detect the proximity of the human body (up to 40 mm) and a control the servomotor, also monitors the accumulated energy levels in the hydro generator. This monitoring ensures that the system, even without continuous use, works properly. To this end, when necessary, automatic flushes are made in order to maintain the hydro generator loaded;

The servomotor, controlled and supplied through the sensor, activates the flush valve, rotating in one direction, for the complete flush, and on the other for the half flush.

03

04

02

01

SYSTEM OPERATION:

Unique and innovator system

18

Quick Refit (QR) is a Sanitary module that adapts to many locations, designed for a greater space saving in any bathroom. With reduced dimensions and incorporated high technology, the QR sanitary module is the best option for a quick renovation of bathrooms and new sanitary installations. There is no need for intervention in the existing walls and it may use the existing inlet and outlet water connections.

A universal and versatile solution for a quick and easy remodelling of your bathroom.

Easy and Quick Installation4 attach points - 2 rear attach points to resistant wall

- 2 attach points to the floor

UniversalFor all types of wallsFive connection possibilities for the water inletAppropriate for all bathroom designs

VersatileFor floor-mounted or wall-hung sanitary wares finishingin tempered glass in 3 available colours: White, Black and Aquamarine

Choose 2 types of dual flush activation - Touch free - Equipped with Hydroboost technology

- Button - With a stainless steel tilt selector button

QR-INOXSanitary Module

19

Touch freeWith the QR-INOX TOUCH FREE, there is no need touch it to activate the flush. The tempered glass is equipped with capacitive sensors that detect the approach of the hand at approximately 40 mm and, through the Hydroboost technology, they activate the flush.You can choose between the half flush and the complete flush by simply approaching your hand: the selected flush is then confirmed through the illuminated led.With the QR-INOX TOUCH FREE, hygiene and convenience are taken to maximum level, by turning to a clean and sustainable technology.

The QR-INOX BUTTON comes with a stainless steel tilt selector button with a matt finish for activating the flush. The button’s rounded shapes provide the QR-INOX BUTTON with nobility and distinctiveness. Selection between full flush and half flush happens simply pushing one of the two sides of the stainless steel button.The activation process is very smooth thanks to the pneumatic systems placed inside the QR-INOX.

Button

- It uses the energy of water in motion

- It generates and stores power from the water that fills the toilet tank

- Power is used to activate the flush

- There is no need to connect to the power grid

- Self-sustainable

- Self-sufficient electronic activation system

Hidroboost

20

QR-INOXSanitary Module

Sanitary ModuleQuick and easy installationOne-piece stainless steel slide moulding

8 mm tempered glass front panelEasy access for maintenance via split glass

4 water inlet pointsConnection with a 34 cm flexible hoseAllows for an internal hidden connection or the use of the 4 water inlets in the moulding

Universal connection to any type of toilet

Easily adjustable flush pipe

Equipped with OLI74 PLUSDual flush (3/6 lt)Saves water up to 50%

Inlet valve with delayed opening systemSaves at least 9 litres of water per dayEcological and quiet (NF Class 1)

Anti-condensation and sound insulation

Includes all accessories necessary for the installation

Choose any sanitary wareThe Quick Refit INOX sanitary module was designed for a wall-mounted application in new installations or when renovating older ones.QR is an excellent option for its easy assembly and for the free space it provides to any bathroom.The QR- INOX gives you freedom to choose wall-hung (1) or floor-mounted sanitary ware (2).The floor version enables the installation of the toilet to the floor, providing it with the possibility of renovating your bathroom with a toilet that completely touches its surface, made of tempered glass, thus resulting in an innovative and elegant solution. You may also choose a wall-hung sanitary ware, using, in such case, the susp version. With that option, which includes the outlet bend for connection to the floor or to the wall, it provides a contemporary solution and does away with traditional architectural barriers, allowing for quicker and more effective cleaning of your bathroom.

(1) - Masonry walls

(2) - Masonry or plasterboard walls

21

503

230180

3510

035

0

1146

108 108 503

1146

325-

350

Code Description

061559 QR-INOX white

061560 QR-INOX black

QR-INOX Susp No-Touch

061561 QR-INOX aquamarine

Code Description



QR-INOX Floor No-Touch


Code Description



QR-INOX Susp Button


Code Description



QR-INOX Floor Button


22

* CompatibilityWide range of control plates

QR-BOXSanitary Module

SlimPlain

Steel Ria

iPlate

230 6.5

150

255

150

6,57,8

(INOX)

240 6

150

245

160

17243

163

17

- Dual flush Sanitary Module 6/3 liters (adjustable to 7/3 liters);

- One piece fiberglass cover available in: White or Black;

- Mechanical actuation;

- Compatible with OLI mechanical control plates;*

- Silent valve class 1 NF certified;

- Supplied with anti-condensation lining;

- 2 external water entry positions, or internally;

- 116 mm thickness;

- CE EN 14055 marking CL1;

- 10 years warranty.**

QR-BOX Susp

Included - WC pan fixing material;

- Internal frame fixing material;

- Inlet and outlet WC pan connection;

- Outlet bend and Ø 90/110 adaptor;

- G ½’’ stop valve.

QR-BOX Floor

Included - WC connection pipe Ø 45;

- Internal frame fixing material;

- Flexible outlet bend Ø 90/90/110

- (220 to 570 mm);


** Global warranty of 10 years and 2 years in external components.

For more information please visit www.oli.pt.

23

HOW TO RENOVATE YOUR BATHROOM - Quick and versatile solution;

- No need for intervention in the existing walls;

- Use of the existing water connections;

- Universal, for all types of walls and Wc pans;

- Compatible with OLI control plates;

- Equipped with an OLI flush cistern.

Code Description

051383 QR-BOX white

051384 QR-BOX black

QR-BOX Floor

Code Description

052995 QR-BOX white

052996 QR-BOX black

QR-BOX Susp

QR-BOX Susp QR-BOX Floor

512

230180

3510

035

0

1160

116 116

1160

512

335-

365

Masonry walls Masonry or plasterboard walls

24

Easy Move allows the pan height to be changed according to user’s needs by means of a highly attractive solution. Easy move is particularly suitable for people with reduce mobility: for this reason it can be equipped, on request, with an handles kit and with a special control panel to activate the flush. The Easy Move frame is compatible with all WC pan models on the market and guarantees modifications in height up to 150 mm, starting with a minimum height of 400 mm and reaching a maximum height of 550 mm; the structure has a depth of 200 mm including the cistern and the activation motor.

The engine is extremely powerful with a thrust of more than 600 kg, and offers maximum reliability and silence: when operating the noise of the motor is practically inaudible. The Easy Move structure also incorporates a flexible flush pipe and possesses a movement speed of 28 mm/s thus allowing rapid alteration of the WC pan height.

The frontal finish of the Easy Move structure, based on the adoption of a panel in tempered glass, offers a choice of colours that include aquamarine, black or white.

EASY MOVEAdjustable frame

2014 innovation award about technologies to support building rehabilitation (Portugal)

25

EASY MOVE

0

726

1455

0-15

0

205-210

40-90

120

Ø 110

180230

35

100

min

330

max

480

min

100

0m

ax 1

150

205

- Adjustable frame with OLI74 PLUS dual flush cistern (6/3 - 7/3.5 litres).

- Ergonomic system that is adjustable in height by 150 mm.

- Compatible with all wall-hung WC pans. - Silent electric engine. - Power supply: 220 V (50/60 Hz); - Power source: 350 Watt. - Insulation: IP66. - Movement velocity of 28 mm/s. - Sheet of tempered glass 6 mm in thickness. - Push power: 6000 N (ca 600 kgf). - Traction power 3000 N (ca 400 kgf). - Limit switch; - Frame tested for 400kg load. - Easy and quick installation with fast fit system. - Global warranty of 10 years and 2 years on the electronic parts.

Included - Flexible outlet pipe. - Remote activation, wired or wireless. - Electric engine. - Tempered glass (6x400x1345 mm) colors: black, white or aquamarine

- Wall-fixing material and pan fixing. - Inlet and outlet pan connection.

NOTE. See compatible control plates on page 46.

Black Aquamarine White

Code Description

601831 EASY MOVE GLASS white

601833 EASY MOVE GLASS black

601835 EASY MOVE GLASS aquamarine

26

HAPPY AIRSystem

- Dual function on a single aspiration fan. - It can be installed on the wall or in the ceiling. - Reduced noise <35 dB(A). - High aspiration capacity 100 m³/h (70% odours, 30% condensation).

- Power Supply: 220V (50Hz). - Insulation: IP35. - The extractor fan operates at 230 V/50 Hz or 110V/50 Hz. - Activated by switch or sensor. - Five minutes delayed switch-off. - Anti-back flow valve. - Paintable cover panel. - Supplied with OLI74 PLUS and all its control plates (see compatible control plates pag. 50).

- Global warranty of 10 years and 2 years on the electronic parts.

Included - Happy Air system: - Inner air filter. - Fixing material. - Electrical fan. - Fan housing. - Covering plate. - “Y” Flush pipe. - Same standard accessories as OLI74 PLUS.


HAPPY AIR

Dual function on a single aspiration fan.It can be installed on the wall or in the ceiling.

The extractor fan operates at 230 V/50 Hz or 110V/50 Hz.

Supplied with OLI74 PLUS and all its control plates(see compatible control plates pag. 50).Global warranty of 10 years and 2 years on the electronic parts.

Same standard accessories as OLI74 PLUS.

Revolutionary solution to the problem of air renewal in any bathroom. High power extractor allows foul odours to be extracted directly from the WC through the flush pipe and condensation to be extracted through an elegant and discreet plate. In combination with the OLI74 PLUS flush cistern, the Happy Air system meets the most severe European standards. Installation of Happy Air is extremely simple because it is connected directly to the OLI74 PLUS flush cistern system and there are no particular restrictions in its positioning.

Walls thickness > 105 mm.225

225

ø 75ø 76ø 80

ø 80

ø 51

ø 50

27

OLI74 PLUS HAPPY AIRSimflex

OLI74 PLUS HAPPY AIR

OLI74 PLUS HAPPY AIRSanitarblock

max 2.0 m

or

light sensor

light switch

Ø50 HDPEØ50 PP-TRIPLUSØ51 PVC-ABS

Ø75 HDPE- PP-TRIPLUSØ76 PVC-ABSØ80 STEEL

Ø50 HDPE

Code Description

601651 OLI74 PLUS Happy Air

Code Description

601951 OLI74 PLUS Simflex Happy Air

Code Description

601854 OLI74 PLUS Sanitarblock Happy Air

30

Flush cisterns to be installed inside the wall and used in combination with floor standing sanitary appliances. Produced with high quality materials, OLI in-wall cisterns are robust, reliable and perfectly adaptable to all available spaces. OLI flush cisterns are suitable for all rooms thanks to the wide range of available control plates, with an extensive variety of choices both in terms of aesthetics and functionality. All OLI in-wall cisterns are equipped with a dual flush system, with silent and rapid float valves. OLI in-wall cisterns are installed and serviced rapidly and easily thanks to simplified access to their internal mechanisms.

The Simflex installation system is composed of a galvanised metal frame, to be used in masonry walls for the rapid and safe installation of wall-hung sanitary appliances. The Simflex mounting frame includes different versions designed specifically for the installation of wall-hung WC pans, washbasins, and bidets. The main advantage of the Simflex system is the possibility of rapidly and safely installing a structure that includes a flush cistern and connection system for wall-hung pans, the type of WC that is becoming increasingly popular in all markets due to the advantages that this system offers in terms of facilitating cleaning operations and occupying less space in the bathroom. As well as this specific advantage, we can also add the superior characteristics of the OLI cisterns: the wide range of available control plates, the lining for thermal insulation, the quality of the internal components, the silent operation of the float valve, simplified maintenance and the classification in class A of water efficiency.

The Sanitarblock mounting frame system is made up of a tubolar metal frame with epoxy resin paint, to be fixed to the floor and to the load bearing structures of the plasterboard wall to support the mounting of wall-hung sanitary appliances. The system includes different structures for the installation of wall-hung WC pans, washbasins, bidets and urinals. The main advantage of the Sanitarblock system is the possibility of rapidly and safely installing a structure, inside light walls, that includes a flush cistern and connection system for wall-hung pans. The Sanitarblock system is equipped with a Fast Fit system for fixing the frame to the load bearing walls and this system stands out for its strength and ease of application. The threaded spindle can be cut according to necessity and is secured by manually turning the screw supplied. This system also allows the frame to be levelled off by performing a precise final adjustment. The Sanitarblock system has characteristics of high mechanical resistance in compliance with French Standard NF XP-D12 208 (400 kg). Available also the version S80, developed to allow the sanitarblock structure to fit into very reduced spaces (80 mm).

The OLI Sanitarblock free-standing mounting frame system is composed of metal frames covered with epoxy resin paint, to be secured to the floor only for the installation of wall-hung pans inside light walls. The Sanitarblock free-standing installation system includes frames for wall-hung WC pans, washbasins and bidets. The main advantage of the Sanitarblock free-standing system is the possibility of rapidly and safely installing a structure, without the necessity of any type of wall, that includes a flush cistern and connection system for wall-hung pans. The feet of the Sanitarblock free-standing structure are designed so that the structure offers good resistance when secured to the floor only: in particular, load resistance is guaranteed in compliance with the French Standard NF XPD12 208 (400 kg).

CONCEALED

IN-WALL FLUSH CISTERNS

SIMFLEX

SANITARBLOCK

SANITARBLOCK FREE STANDING

OLI in-wall cisterns are installed and serviced rapidly and easily thanks to simplified access to their internal

The Simflex installation system is composed of a galvanised metal frame, to be used in masonry walls for the rapid and safe installation of wall-hung sanitary appliances. The Simflex mounting frame includes different versions designed specifically for the installation of wall-hung WC pans, washbasins, and bidets. The main advantage of the Simflex system is the possibility of rapidly and safely installing a structure that includes a flush cistern and connection system for wall-hung pans, the type of WC that is becoming increasingly popular in all markets due to the advantages that this system offers in terms of facilitating cleaning operations and occupying less space in the bathroom. As well as this specific advantage, we can also add the superior characteristics of the OLI cisterns: the wide range of available control plates, the lining for thermal insulation, the quality of the internal components, the silent operation of the float valve, simplified maintenance and the classification in class

The Sanitarblock mounting frame system is made up of a tubolar metal frame with epoxy resin paint,to be fixed to the floor and to the load bearing structures of the plasterboard wall to support the mounting of wall-hung sanitary appliances. The system includes different structures for the installation of wall-hung WC pans, washbasins, bidets and urinals. The main advantage of the Sanitarblock system is the possibility of rapidly and safely installing a structure, inside light walls, that includes a flush cistern and connection system for wall-hung pans. The Sanitarblock system is equipped with a Fast Fit system for fixing the frame to the load bearing walls and this system stands out for its strength and ease of application. The threaded spindle can be cut according to necessity and is secured by manually turning the screw supplied. This system also allows the frame to be levelled off by performing a precise final adjustment. The Sanitarblock system has characteristics of high mechanical resistance in compliance with French Standard NF XP-D12 208 (400 kg). Available also the version S80, developed to allow the sanitarblock structure to fit into very reduced spaces (80 mm).

The OLI Sanitarblock free-standing mounting frame system is composed of metal frames covered with epoxy resin paint, to be secured to the floor only for the installation of wall-hung pans inside light walls. The Sanitarblock free-standing installation system includes frames for wall-hung WC pans, washbasins and bidets. The main advantage of the Sanitarblock free-standing system is the possibility of rapidly and safely installing a structure, without the necessity of any type of wall, that includes a flush cistern and connection system for wall-hung pans. The feet of the Sanitarblock free-standing structure are designed so that the structure offers good resistance when secured to the floor only: in particular, load resistance is guaranteed in compliance with the

SANITARBLOCK FREE STANDING

31

1000

0

FastFit

IN-WALL INSTALLATION SYSTEMS

32

- Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 liters).

- 4/2.6 - 4.5/3 liters flush version upon request. - Polypropylene (PP) cistern highly resistant and inalterable to thermal stress.

- Delayed refilling - Azor plus inlet valve. - Silenced valve class 1 NF certified. - Pneumatic activation with available kit. - Compatible with electronic flush plates. - Hidroboost version available. - 80 mm total thickness. - Supplied with anti-condensation lining. - Certified cistern according KIWA/SABS/SAI/WRAS standards. - CE EN 14055 marking CL1. - “A” class for the Energy Efficiency in compliance with the ANQIP Authority requirements.

- 10 years warranty. - Compatible with all floor mounted WC pans.

OLI74 PLUS

- Compatible with all wall-hung WC pans. - 80 mm thickness. - Built-in wall installation.

Included - Net for easier mortar adhesion. - WC pan fixing material. - Frame fixing material. - Inlet and outlet pan connection. - Outlet bend. - G ½’’ stop valve. - Adaptor Ø 90-110.


OLI74 PLUSSimflex

780

750

Ø90

35

990

635

460

100

185

180230

120

10-90

400±10

80

0

74

8010-90

120

458

576

733-

963

161-

391

185

120

400±10

Included - 360 mm flush pipe included. - Wall fixing kit. - Net for easier mortar adhesion. - G ½’’ stop valve. - Connecting pipe Ø 45.


Inlet valve with delayed refilling.Saves up to 9 litres of water per day.

SAVING

Code Description

601601 OLI74 PLUS Mechanic

077715 OLI74 PLUS Electronic

060048 OLI74 PLUS Hidroboost

601602 OLI74 PLUS Pneumatic

601527 OLI74 PLUS Pneumatic kit

086090 OLI74 PLUS Hidroboost kit

077754 OLI74 PLUS Electronic kit

Code Description

601901 OLI74 PLUS Mechanic Simflex

060047 OLI74 PLUS Hidroboost Simflex

077736 OLI74 PLUS Electronic Simflex


33

- Compatible with all wall-hung WC pans. - For or plasterboard wall installation. - Depth adjustable outlet bend. - Frame tested for 400 kg load. - Height adjustable from 0 to 150 mm.

Included - WC pan fixing material. - Frame fixing material (floor). - Inlet and outlet pan connection. - Outlet bend. - G ½’’ stop valve. - Adaptor Ø 90-110


- Compatible with all wall-hung WC pans. - Built-in or plasterboard wall installation. - Easy and quick installation. - Depth adjustable outlet bend. - Height adjustable from 0 to 150 mm. - 80 mm thickness.

Included - WC pan fixing material. - Frame fixing material. - Inlet and outlet pan connection. - Outlet bend. - G ½’’ stop valve. - Adaptor Ø 90-110.


- Compatible with all wall-hung WC pans. - Built-in or plasterboard wall installation. - Frame tested for 400 kg load. - Depth adjustable outlet bend. - Easy and quick installation with fast fit system. - Height adjustable from 0 to 200 mm.

Included - WC pan fixing material. - Frame fixing material. - Inlet and outlet pan connection. - Outlet bend. - G ½’’ stop valve. - Adaptor Ø 90-110.

OLI74 PLUSSanitarblock

OLI74 PLUSSanitarblock free Standing

OLI74 PLUSS80 Sanitarblock

185580

1150

0-20

0

Ø90/110

230180

35

100

120

400±10

120

10-90120-170

1000

0

R1/2500185

230180 35

100

1000

0

90

400±10

1110

320

Ø90/100/1100-15

0

120

10-90

185580

10-90

120

1150

0-15

0

230180 35

100

180

400±10

Ø110

0

1000

Code Description

601801 OLI74 PLUS Mechanic Sanitarblock

059889 OLI74 PLUS Hidroboost Sanitarblock

077746 OLI74 PLUS Electronic Sanitarblock


Code Description


Code Description

601824 OLI74 PLUS Sanitarblock free standing


34

- Dual flush in-wall cistern compatible with either dual or single flush actuators 6/3 liters (adjustable to 4/2 or 7/3 liters).

- Pre-set version 4/2 (CL1) or 4/2,6 (CL2 on request) liters. - Polypropylene (PP) cistern highly resistant and inalterable to thermal stress.

- Delayed refilling - Azor plus inlet valve. - Azor Plus valve class 1 NF certified. - 150 mm thickness. - Top or front activation/access. - Mechanical actuation. - Pneumatic Kit available. - Lower/under bench installation possibility. - Cistern certified according to NF, SAI, WRAS Standards. - CE EN 14055 marking CL1. - “A“ Water Efficiency in compliance with the ANQIP Authority requirements.

- Supplied with anti-condensation lining. - 10 years warranty. - Compatible with all floor mounted WC pans.

Included - 315 mm flush pipe. - G ½’’ stop valve. - WC connection pipe Ø 45 .

NOTE. See compatible control plates on Pag. 62.

EXPERT EVO

EXPERT EVOSimflex 820

402185

517

230180

3510

074

3

Ø90-110

0

150 10-90

120

400 ± 10

max

. 645

min

. 400

405

440

0

120

150 10-90

±400 10

185

front activation top activation

- Compatible with all wall-hung WC pans.

- Built-in wall installation. - Lower/under bench installation.

Included - WC pan fixing material. - Frame fixing material. - Inlet and outlet WC pan connection.

- Outlet bend and Ø 90/110 adaptor.


Code Description

721003 EXPERT EVO Mechanic

721005 EXPERT EVO Pneumatic

601038 EXPERT EVO Mecahnical kit

556807 EXPERT EVO Pneumatic kit

Code Description

076456 EXPERT EVO Mechanic Simflex 820


SAVING/DAY

35

EXPERT EVOSimflex 1130

402185

768

R½R½

230

180

0

3510

010

00

150 20-90

R½

Ø90-110

400±10

120


- Built-in wall installation.

- Cable activation.

Included - WC pan fixing material.

- Frame fixing material.

- Inlet and outlet pan connection.

- Outlet bend.


- Adaptor Ø 90-110.

NOTE. See compatible control plate on page 62.

EXPERT EVOSanitarblock 820-1130

0

Ø110

400185 R ½

R ½R ½

230180

150-200

20-90

820/

880

743-

803

3510

0

400±10

0-20

0

120

400185

R½R½

230180

Ø110

0

0-20

0

1000

100

35

150-210

1130

400±10

120

20-90


- Built-in or plasterboard wall installation.

- Frame for 400 kg load.

- Easy and quick installation with fast fit system.

- Height adjustable from 0 to 200 mm.

- Depth adjustable outlet bend.

- Lower installation possibility with the 820 frame.

Included - WC pan fixing material.

- Frame fixing material.

- Inlet and outlet pan connection.

- Outlet bend.


- Adaptor Ø90-110


Code Description

014095 EXPERT EVO Mechanical Simflex

Code Description

721705 EXPERT EVO Sanitarblock 820 Ø90/110 Pneumatic

721805 EXPERT EVO Sanitarblock 1130 Ø90/110 Pneumatic

721703 EXPERT EVO Sanitarblock 820 Ø90/110 Mechanical

721803 EXPERT EVO Sanitarblock 1130 Ø90/110 Mechanical

014092 EXPERT EVO Free standing Sanitarblock 820 Mechanical

36

- Dual flush in-wall cistern compatible with either dual or single flush actuators (7/3.5 - 6/3 liters).

- Polypropylene (PP) cistern highly resistant and inalterable to thermal stress.

- Azor Silenced inlet valve class 1 NF certified. - Compatible with pneumatic buttons - available kit. - 80 mm total thickness. - Control plates size 330x190 mm. - Supplied with anti-condensation lining. - “A“ Energy Efficiency in compliance with the ANQIP Authority requirements.

- CE EN 14055 marking CL1. - 10 years warranty. - Compatible with all floor mounted WC pans.

Included - 360 mm flush pipe included. - Wall fixing kit. - Net for easier mortar adhesion. - G ½’’ stop valve.


EVO 330

455

419

280

580

R½”

X

0

max

825

min

665

80

34

140

400±10

Code Description

600001 EVO 330

556805 EVO 330 Pneumatic kit

37

EVO 330Simflex

EVO 330Sanitarblock

280420

Ø90

23018077

0

3563

510

00

100

330

400±10

8034

140

280120-170500

Ø90/100/110

1150

635

1000

3510

0

0-20

0

230180

83

140

120

400±10

0


Included - Net for easier mortar adhesion. - WC pan fixing material. - Frame fixing material. - Inlet and outlet pan connection. - Outlet bend. - G ½’’ stop valve.


- Compatible with all wall-hung WC pans. - Built-in or plasterboard wall installation. - Frame tested for 400 kg load. - Easy and quick installation with fast fit system.

- Depth adjustable outlet bend. - Height adjustable from 0 to 200 mm.

Included - WC pan fixing material. - Frame fixing material. - Inlet and outlet pan connection. - Outlet bend. - G ½’’ stop valve.


Code Description

600201 EVO 330 Simflex Ø 90/90

Code Description

600101 EVO 330 Sanitarblock Ø 90/90-100-110

38

OLI120 PLUS

Code Description

099941 OLI120 PLUS Mechanic

099942 OLI120 PLUS Hidroboost

488185 126 20-90

120

min

530

- m

ax74

5425

400±10

- Dual flush in-wall cistern compatible with either dual or single flush actuators 6/3 liters (adjustable to 4/2 or 7/3 liters).

- Polypropylene (PP) cistern highly resistant and inalterable to thermal stress.

- Delayed refilling - Azor plus inlet valve. - Silent valve class 1 NF certified. - Mechanical actuation. - Hidroboost version available. - 120 mm thickness. - Supplied with anti-condensation lining. - According to DIN/NF/KIWA standards. - CE EN 14055 marking CL1. - 10 years warranty. - Compatible with all floor mounted WC pans.

Included - 360 mm flush pipe included.

- Wall fixing kit.

- Net for easier mortar adhesion.


- WC connection pipe Ø 45.

NOTE. See compatible control plates on Pag. 62.NOTE. Available in April 2015.


SAVING/DAY

39

OLI120 PLUSSimflex

OLI120 PlusSanitarblock

OLI120 PLUSFree Standing Sanitarblock

400±10

75-115

500

1150

0-20

0

1000

230180

3510

0

185126-170

120

20-90

Ø90-11040 85

0

400±10

500

1150

0-15

0

1000

3510

0

18520-90

Ø90-11040

180

75-115

230180

120

0

420

770

1000

3510

0

185

128

20-90

120

Ø90-110

0

400±10230180


Included - WC pan fixing material. - Frame fixing material. - Inlet and outlet WC pan connection. - Outlet bend and Ø 90/110 adaptor. - G ½’’ stop valve.

Code Description

099946 OLI120 PLUS Mechanic Simflex

099947 OLI120 PLUS Hidroboost Simflex

Code Description


099950 OLI120 PLUS Hidroboost Sanitarblock

Code Description

099952 OLI120 PLUS Mechanic Free Standing

099953 OLI120 PLUS Hidroboost Free Standing

- Compatible with all wall-hung WC pans. - Built-in or plasterboard wall installation. - Frame tested for 400 kg load. - Depth adjustable outlet bend. - Easy and quick installation with fast fit system.

- Height adjustable from 0 to 200 mm.

Included - WC pan fixing material. - Frame fixing material. - Inlet and outlet WC pan connection. - Outlet bend and Ø 90/110 adaptor. - G ½’’ stop valve.

- Compatible with all wall-hung WC pans. - For plasterboard wall installation. - Depth adjustable outlet bend. - Frame tested for 400 kg load. - Height adjustable from 0 to 150 mm.

Included - WC pan fixing material. - Frame fixing material (floor). - Inlet and outlet WC pan connection. - Outlet bend and Ø 90/110 adaptor. - G ½’’ stop valve.

40

- Dual flush in-wall cistern compatible with either dual or single flush actuators (6/3 liters).

- Compact inlet valve class 1 NF certified. - Compatible with pneumatic buttons - available kit. - 187 mm thickness. - 270 mm reduced width. - Top access for maintenance. - CE EN 14055 marking CL1. - Cistern certifeid according to NF Standard. - Supplied with internal anti-condensation lining. - 10 years warranty. - Compatible with all floor mounted WC pans.

Included - 315 mm flush pipe. - G ½’’ stop valve. - Connecting pipe Ø 45.


QUADRA

R1/2

278 187

430

615

0

400±10

130

215Code Description

720002 QUADRA Mechanic

41

QUADRASanitarblock

300215

190-240

10-90

1801150

35

1000

100

0-20

0

130

Ø110

0

Corner Kit2x

- Compatible with wall-hung WC pans with a 180 mm fixation length.

- Built-in or plasterboard wall installation. - Frame tested for 400 kg load. - Easy and quick installation with fast fit system.

- Depth adjustable outlet bend. - Height adjustable from 0 to 200 mm. - 300 mm, reduced width. - Optional corner kit.

Included - WC pan fixing material. - Frame fixing material. - Inlet and outlet pan connection. - Outlet bend. - G ½’’ stop valve.


335

670.43

Code Description

722019 QUADRA Mechanic Sanitarblock

719183 Frame kit for angle installations

44

- Frame for wall-hung bidet. - Built-in wall installation. - Galvanized frame. - 80 mm thickness. - Adjustable attachment plate. - 10 years warranty.

Included - Bidet fixing material. - Frame fixing material. - Outlet bend Ø 40-32/50-40.

- Frame for wall-hung bidet. - For built-in or plasterboard wall installation. - Painted tubular frame. - Frame tested for 400 kg load. - 80 mm thickness. - Easy and quick installation with fast fit system. - Height adjustable from 0 to 200 mm. - 10 years warranty.

Included - Bidet fixing material. - Frame fixing material. - Outlet bend Ø 40 - 32/50 - 40. - Two G ½ fittings for tap connection (adjustable).

- Frame for wall-hung bidet. - For built-in or plasterboard wall installation. - Painted tubular frame. - Frame tested for 400 kg load. - 80 mm thickness. - Height adjustable from 0 to 200 mm. - 10 years warranty.

Included - Bidet fixing material. - Frame fixing material. - Outlet bend Ø 40 - 32/50 - 40.

BIDETSimflex

BIDETSanitarblock

BIDETSanitarblock

500420

180-230

185-

250

Ø50

80153320

245

6

D50

80/120 (with optional attachments)400±10

500

80-120

410 -10+20

0

0-20

075

0-81

082

0

217-323167-273

230180

505

Ø 32-40

Ø50

45-98

80-190

145-420

75-275

180230420

Code Description

610010 BIDET Simflex

Code Description

618547 BIDET Sanitarblock

Code Description

714552 BIDET Sanitarblock

45

- Frame for wall-hung bidet. - For plasterboard wall installation. - Painted tubular frame. - Frame tested for 400 kg load. - Easy and quick installation - Height adjustable from 0 to 150 mm. - 10 years warranty.

Included - Bidet fixing material. - Frame fixing material (floor). - Outlet bend Ø 40 - 32/50 - 40.

- Universal frame for wall-hung WC or bidet. - Built-in wall installation. - Easy and quick installation. - Galvanized frame. - Adjustable in height. - 10 years warranty.

Included - WC pan/bidet fixing material. - Frame fixing material.

- Compatible with all wall-hung WC pans. - For built-in or plasterboard wall installation. - Painted tubular frame. - Frame tested for 400 kg load. - Height adjustable from 0 to 200 mm. - Depth adjustable outlet bend. - 10 years warranty.

Included - WC pan fixing material. - Frame fixing material. - Outlet bend.

BIDETSanitarblock free standing

ECOSimflex

WCSanitarblock

570

145215330

170

404

297

0-200

500

230180

3510

0

0

120-190 Ø110

400±10

420230180

180

80

75-275

Ø50

45-9

8

140-

335

Ø32-40

505

Code Description

000537 BIDET Sanitarblock free standing

Code Description

618581 ECO Simflex

Code Description

714001 WC Sanitarblock

46

- Frame for wall-hung washbasin. - Built-in wall installation. - Galvanized frame. - 80 mm thickness. - Adjustable attachment plate. - 10 years warranty.

Included - Fixing material. - Outlet bend Ø 40-32/50-40.

- Frame for wall-hung washbasin. - For built-in or plasterboard wall installation. - Painted tubular frame. - Adjustable attachment plate. - 80 mm thickness. - Easy and quick installation with fast fit system.

- Height adjustable from 0 to 200 mm. - 10 years warranty.

Included - Bidet fixing material. - Frame fixing material. - Outlet bend Ø 40 - 32/50 - 40. - Two G ½” fittings for tap connection (except Easy version).

WASHBASINSimflex

WASHBASINSanitarblock

420

62-300

75-275

Ø 50

20-80 145-

420

1150

Ø 32-40

105-155

420170-280

210-

260

70

15376

D50

345

80850±10

150

50Code Description

611010 WASHBASIN Simflex

Code Description

611212 WASHBASIN Sanitarblock

47

- Frame for wall-hung washbasin. - For plasterboard wall installation. - Painted tubular frame. - Adjustable attachment plate. - Easy and quick installation. - Height adjustable from 0 to 150 mm. - 10 years warranty.

Included - Bidet fixing material. - Frame fixing material (floor). - Outlet bend Ø 40 - 32/50 - 40. - Two G ½” fittings for tap connection (adjustable).

WASHBASINSanitarblock free standing

95045

-98

145-

420

75-275

165-280420

180

80

- Frame for wall-hung urinals - For built-in or plasterboard wall installation. - Painted tubular frame. - Easy and quick installation with fast fit system.

- Height adjustable from 0 to 200 mm. - Adjustable attachment plates. - 10 years warranty.

Included - Frame fixing material. - Outlet bend Ø 50/50. - G ½’’ fitting for tap connection (adjustable). - G ½’’ flexible hose.

NOTE. See compatibility plates on page 61.

URINALSanitarblock

500

1140

-130

0

1000

120

0

200

Ø50

80 min

650

Code Description

011377 WASHBASIN Sanitarblock free standing

Code Description

715602 URINAL Sanitarblock

50

CONTROL PLATES- Unique and innovative design- Mechanic, pneumatic, electronic and touch-free activation- Wide availability of materials and finishes

Thanks to its modern and stylish design, the OLI push plates range completes the bathroom in perfect accordance with the most innovative and successful aesthetic trends.All OLI plates are dual flush equipped, providing therefore benefit for the environment both in term of water saving and cost reduction.OLI plates are available with different types of activation: mechanic, pneumatic, electronic and the brand new touch-free. Produced with different materials (ABS, Metal, Glass or Ceramic) the OLI plates own an high resistance to shock and scratches.Besides the traditional finishing in white, polished chrome and satin chrome, several OLI plates are available in special version such as the soft-touch finishing, which combines high pleasant touch, outstanding hygienic standard and elegant design.

51

MOON

The first and the only control plate in one-piece ceramic

NOTE. See compatible flush cisterns on Pag. 62.


230

150

16

Hidroboost

GLASSY220 4

150

No-touch activationThe use of capacitive sensors enabled OLI to develop the concept around a one-piece ceramic plate with innovative formal and tactile features that ensure superior hygiene levels and ergonomics.

Simple and intuitiveThe simple and elegant design of the Moon plate combines high technology with tradition, resulting in a smooth and comfortable interface for the user, whose elegance of shapes highlights the dual flush and favours the half flush.

Traditional material perfectly in line with the bathroom’s sanitary ware

220.00

150.

00 Single piece in glass - Traditional material in perfect harmony with your bathroom.

- Hygienic and easy to clean.

Easy installation - Gull-wing opening system which prevents damages.

- Anti-error electronic connections. - Waterproof connectors.

Code Description

059887 MOON

Code Description

069857 GLASSY black

068130 GLASSY white

069858 GLASSY aquamarine

- One-piece in white ceramic material. - Dual flush. - No-touch activation through capacitive sensors.

- Detection capacity - up to 25mm. - Compatible with Hydroboost system. - Hygienic and easy to clean. - Gull-Wing opening system, which prevents damages.

- Anti-error electronic connections. - Waterproof connectors. - 2 years warranty.

- No-touch activation through capacitive sensors with led signs.

- Dual flush. - Detection capacity - up to 25mm. - Compatible with Hydroboost system. - Hygienic and easy to clean. - Gull-Wing opening system, which prevents damages.

- 4mm thickness. - Anti-error electronic connections. - Waterproof connectors. - One-piece in tempered glass material. - 2 years warranty.

Hidroboost

52

TRUMPET

SIZA VIEIRA

- Arch. Siza Vieira Design. - Dual flush. - Pneumatic actuation. - Actuation force <20N. - 2mm thickness. - Stainless steel material. - 2 years warranty.

215

145

2

2

29.7

Siza Vieira, born in Matosinhos, in 1933 is the most awarded contemporary Portuguese architect. Graduated in School of Fine Arts in Oporto, he collected a several number of international awards in his long career, which stand out the following: Pritzker Prize in 1992; The Wolf Prize of Arts in 2001; The Golden Lion for Lifetime Achievement, in 2012, and, in 2014, the Fritz Hoger award.Last year Siza Vieira created the “Trumpet” for OLI, an elegant and harmonious control plate which combines design and music, putting in relief the main elements of the trumpet, a brilliant instrument made famous by Chet Baker, Miles Davies and Louis Armstrong.


Code Description

046199 TRUMPET polished chrome

046198 TRUMPET brushed

One of the most prestigious and awarded Portuguese architects, Siza Vieira, designed a true masterpiece, inspired in an instrument played by great maestros: the trumpet. OLI is proud to present the

“Trumpet”, the perfect balance between a truly unique design and exceptional music.

Buttons - Elegant in design with two

buttons for the dual flush system which perfectly characterize the pistons on a trumpet (the button with the “+” symbol for the full flush and the button with the “-” symbol for the half flush).

53

EDUARDO SOUTO DE MOURA

The support and inspection plate has the necessary dimension to apply the control plate and two Portuguese tiles in the extremities, in order to ensure access to the cistern interior for possible maintenance actions.

SM15 - Arch. Souto de Moura Design. - Dual flush. - Pneumatic actuation. - Actuation force <20 N. - Installation on the surface wall with 150 mm x150 mm tiles.

- White tempered glass material. - 2 years warranty.

147

147

21

Ø5

140

3

3

435

137

Code Description

022238 SM15

Souto de Moura is a renowned Portuguese architect born in 1952 in Oporto. Graduated in School of Fine Arts of Oporto, he soon won several Portuguese and international contests for important projects, with whom started to gain reputation which led him, in 2001, to the Gold Medal of Heinrich Tessenow Foundation, in 2011 to Pritzker Award, known as the Nobel of architecture, and, finally, to the Wolf Prize of Arts in 2013. In 2011 he developed the SM15 for the new Portugal Pousada, in Covilhã. Made in tempered white glass, the control plate has 147x147 mm, ideal for a smooth application on walls covered with the traditional Portuguese tiles.


54

- Stainless steel control plates polished chrome or Satin chrome finish.

- 2 mm thickness. - Tiltable button. - Dual flush. - Mechanical actuation. - Actuation force < 20 N. - 2 years warranty.

NOTE. See compatible flush cisterns on page 62.

INO-X

245

2

215

215

2

215

2

145

215

2

145

245

2

215

215

2

Ino-x 05

Ino-x 03

Ino-x 01

Ino-x 06

Ino-x 04

Ino-x 02

Romano Adolini is an Italian architect and designer, born in 1956 in Nepi. Graduated in from “La Sapienza” University of Rome, he founded, in the same city, a professional office, in 1984, where he started to planning domestic and commercial interiors. Attached by ceramics as a material, he begun to collaborate with important companies, designing items for bathroom collections.

ROMANO ADOLINI

Code Description

660001 INO-X 01 polished chrome

661001 INO-X 01 matt chrome











55


OCEANIA

OCEANIA MIA

220

150

33 4 (INOX)7 (GLASS)

81 4 (INOX)7 (GLASS)

81 1233 12

221

142


Code Description

Control plates with one finishing - Mechanical version

054561 Oceania mech Stainless steel-polished chrome

054564 Oceania mech Stainless steel-matt chrome

054554 Oceania mech Glass-white

054555 Oceania mech Glass-matt white

054557 Oceania mech Glass-black

054556 Oceania mech Glass-aquamarine

Control plates with stainless steel button - Mechanical version

054562 OCEANIA mech Inox Glass-black

054558 OCEANIA mech Inox Glass-white

054559 OCEANIA mech Inox Glass-matt white

054560 OCEANIA mech Inox Glass-aquamarine

Code Description

Control plates with one finishing - Pneumatic version

054998 OCEANIA pneu Stainless steel-polished chrome

054988 OCEANIA pneu Stainless steel-matt chrome

054989 OCEANIA pneu Glass-white

054990 OCEANIA pneu Glass-matt white

054992 OCEANIA pneu Glass-black

054991 OCEANIA pneu Glass-aquamarine

Control plates with stainless steel button - Pneumatic version

054996 OCEANIA pneu Inox Glass-black

054993 OCEANIA pneu Inox Glass-white

054994 OCEANIA pneu Inox Glass-matt white

054995 OCEANIA pneu Inox Glass-white

Mechanical Pneumatic

Mechanical Pneumatic

- Dual Flush. - Mechanical or Pneumatic actuation. - Actuation force < 20 N. - Reduced thickness. - Tiltable button. - Gull-Wing opening system, which prevents damages.

- Vandal-Proof. - Different finishing possibilities and combinations. - Tempered glass, Stainless steel or Tempered glass plate with matt chrome Stainless steel button.

- 2 years warranty.

* Installation - minimum front wall thickness (pneumatic version): OLI74 PLUS: 25mm/ Expert Evo- Front Application: 0mm / Expert Evo- Top Application: 30mm

* Installation - minimum front wall thickness (pneumatic version): OLI74 PLUS: 25mm/ Expert Evo- Front Application: 0mm / Expert Evo- Top Application: 30mm

Customize your Oceania with your preferred finishing, with any 10-mm-thick material, whether ceramic casings, wood or decorative stone, which can easily be custom cut for your Oceania, for example, through the water-jet cutting technology and, therefore, obtain your MIA with a unique and perfect finishing.The Oceania Mia control plate is provided with a high-resistance dual-adhesive glue for easy application of any front finishing of your choice.For the finishing of your control plate to be perfect, this version is provided with a stainless steel frame and matt chrome push button.Choose the finishing of your preference and treat yourself to a unique control plate.

An infinite world of custom-made finishings

Code Description

054563 OCEANIA MIA mech (Customizable)

054997 OCEANIA MIA pneu (Customizable)

56

- Wide range of colours and combinations. - Possibility of replacing the control buttons with kit elegance and kit fantasy.

- 6 mm thickness. - Dual flush. - Mechanical actuation. - Soft-touch finishing available. - Actuation force < 20 N. - 2 years warranty.


IPLATE240

6

150

kit elegance kit fantasy

- Dual flush with braille descriptions. - 6.5 mm thickness. - Soft-touch finishing available. - Mechanical actuation. - Actuation force < 20 N. - 2 years warranty.

- ABS control plate coated with Stainless Steel (AISI 304).

- 7.8 mm thickness. - Mechanical actuation.


SLIM

SLIM INOX

255

150

6.57.8

(INOX)

Code Description

670001 IPLATE white

670002 IPLATE anthracite

670003 IPLATE purple

670004 IPLATE polished chrome

670005 IPLATE black soft touch

670006 IPLATE matt chrome

670007 IPLATE red

670008 IPLATE white soft touch

670051 KIT FANTASY IPLATE

670052 KIT ELEGANCE IPLATE

Code Description

659041 SLIM white

659044 SLIM polished chrome

659046 SLIM matt chrome

659055 SLIM black soft touch

057141 SLIM INOX

57

- Wide range of finishing and combinations. - Silent activation due to the pneumatic system. - Dual flush. - Soft-touch finishing available. - Actuation force < 20 N. - 2 years warranty.


- Wide range of finishing and combinations. - Silent activation due to the pneumatic system.

- Dual flush. - Soft-touch finishing available. - Actuation force < 20 N. - 2 years warranty.


KARISMA

SALINA

230

146

1063.5

215

145

1063.5

*Minimum values for casing in the pneumatic version: OLI74 PLUS: 25 mm/ Speed - Front Application: 0 mm / Speed - Top-Mounted Application: 30 mm


Code Description

641001 KARISMA white

641004 KARISMA chrome

641006 KARISMA matt chrome

641015 KARISMA black soft-touch

641017 KARISMA black soft-touch-chrome

641019 KARISMA chrome-black soft-touch

Code Description

640081 SALINA white

640084 SALINA chrome

640086 SALINA matt chrome

640097 SALINA black soft-touch-chrome

640099 SALINA black soft-touch-matt chrome

58

- Zamac control plate. - Dual flush. - Vandal-proof. - Mechanical actuation. - Actuation force < 20 N. - 2 years warranty.


- Dual flush. - Mechanical actuation. - Actuation force < 20 N. - 2 years warranty.


- Dual flush. - Mechanical actuation. - Bacterial-proof available. - Actuation force < 20 N. - 2 years warranty.

NOTE. See compatible flush cisterns on page 58

METAL

RIVER

RIA

163

17

245

165

19

246

160

17

- Stainless steel control plate, chrome or matt finish.

- Silent activation due to the pneumatic system.

- Dual flush. - 2 mm thickness. - Actuation force < 20 N. - Vandal-proof. - 2 years warranty.


TREND215

145

49.5

2


Code Description

656504 TREND chrome

656506 TREND matt chrome

Code Description

656004 METAL chrome

656006 METAL matt chrome

Code Description

638501 RIVER DUAL white

638504 RIVER DUAL chrome

638506 RIVER DUAL matt chrome

638508 RIVER DUAL gold

Code Description

640581 RIA white

640584 RIA chrome

640586 RIA matt chrome

640591 RIA white bacterial-proof

59

- Stainless steel control plate - Dual flush. - Mechanical actuation. - Vandal-proof. - Actuation force < 20 N. - 2 years warranty.






CLASSIC

DUAL

ORIENT

330

190

30

190

325 14

310

190

35

Code Description

627401 CLASSIC chrome

Code Description

627001 DUAL white

627004 DUAL chrome

627006 DUAL matt chrome

Code Description

635161 ORIENT white

60

- Drive sensor infra red or mechanical. - Dual flush (permanence < 60 s half flush > 60 s full flush).

- Metal control plate to flushing cisterns - OLI74 PLUS electronic. - Automatic pre cleaning. - Works with electricity (transformer 230 V / 12 V not included).

- Anti-vandalism.


ELECTRA III

ELECTRA II

ELECTRA I

243

163

14

243

163

14

243

163

14

- Drive sensor infra red. - Dual flush (permanence < 60 s half flush > 60 s full flush).

- Metal control plate to flushing cisterns - OLI74 PLUS electronic. - Automatic pre-cleaning. - Works with electricity (transformer 230 V / 12 V not included).

- Anti-vandalism.


- Switch (not included) or mechanically activated.

- Single flush. - Metal Control Plate to flushing Cisterns - OLI74 PLUS Electronic. - 4 m switch cable included. - Works with electricity (transformer 230 V / 12 V not included).

- Anti-vandalism.


PRES

S

Code Description

079206 ELECTRA III

Code Description

079205 ELECTRA II

Code Description

079207 ELECTRA I

61

- Infrared sensor activated flow meter. - Single flush. - Stainless steel, polished finish. - Adjustable flush time. - Protection: IP44. - Periodic cleaning flush. - Adjustable activating distance. - Operating pressure: 0.3-10 bar. - G ½” water connection. - 110-240/24 VAC safe power source according to EN60730.

- Vandal-proof. - 2 years warranty.

Note. Compatible with URINAL Sanitarblock.

- Mechanically actuated flow meter. - Single flush. - Metal plate. - 2.5 mm thickness. - Adjustable flow. - Adjustable flush time. - Operating pressure ≥ 3 bar. - G ½” water connections. - Vandal-proof. - 2 years warranty.

Note. The installation of the flow meter provided with the control plates for OLI urinals should be applied before closing up the wall.Note. Compatible with URINAL Sanitarblock.

- Mechanically actuated flow meter. - Single flush. - Tempered glass plate. - 5 mm thickness. - Adjustable flow. - Adjustable flush time. - Operating pressure ≥ 3 bar. - G ½” water connections. - Vandal-proof. - 2 years warranty.

Note. Compatible with URINAL Sanitarblock.

URINOL II

TREND URINOL

SM15 URINAL

150

130 9

147

147

G½” 21.5

161

138

9728

5

138

128125

G½”

138

175

21.5

972.528

161

138

“It has been a privilege to work with OLI about the development of a project perfectly suited for a unique material such as the ceramic.” Eduardo Souto Moura.

Control Plate SM15 has been developed for the requalification project of the former Sierra Star Sanatory which, thanks to the inventiveness of the Architect Eduardo Souto de Moura, was transformed in the brand-new building “Nuove Pousada de Portugal a Covilha”.The control plate SM15, with white tempered glass finishing, has the correct dimension to be perfectly integrated with all the walls covered with ceramic tiles.

Code Description

034627 URINOL elettronic

Code Description

031752 Trend urinol

Code Description

034265 SM15 URINAL

62

COMPATIBILITY

MOON GLASSY TRUMPET SM15 INO-X OCEANIAMECHANIC

OCEANIAPNEUMATIC

iPLATE SLIM KARISMA SALINA TREND METALDUAL

RIVER RIA CLASSIC DUAL ORIENT ELECTRA

OLI74 PLUS

EXPERT EVOMECHANICAL

EXPERT EVOPNEUMATIC

EVO 330

OLI120 PLUS

QUADRA

63

MOON GLASSY TRUMPET SM15 INO-X OCEANIAMECHANIC

OCEANIAPNEUMATIC

iPLATE SLIM KARISMA SALINA TREND METALDUAL

RIVER RIA CLASSIC DUAL ORIENT ELECTRA

OLI74 PLUS

EXPERT EVOMECHANICAL

EXPERT EVOPNEUMATIC

EVO 330

OLI120 PLUS

QUADRA

PNEUMATIC KIT HIDROBOOST VERSION

64

CODESCod. Pag.

000537 45002332 32002333 33011377 47014092 35014095 35022238 53031752 61034265 61034627 61046198 52046199 52051383 23051384 23052995 23052996 23054554 55054555 55054556 55054557 55054558 55054559 55054560 55054561 55054562 55054563 55054564 55054988 55054989 55054990 55054991 55054992 55054993 55054994 55054995 55054996 55054997 55054998 55057141 56059887 51059889 33060047 32060048 32061556 21061557 21061558 21061559 21061560 21061561 21061562 21

Cod. Pag.

061563 21061564 21061565 21061568 21061569 21068130 51069857 51069858 51076456 34077715 32077736 32077746 33077754 32079205 60079206 60079207 60086090 32099941 38099942 38099946 39099947 39099949 39099950 39099952 39099953 39556805 36556807 34600001 36600101 37600201 37601038 34601527 32601601 32601602 32601651 27601801 33601803 33601824 33601831 25601833 25601835 25601854 27601901 32601951 27610010 44611010 46611212 46618547 44618581 45627001 59

Cod. Pag.

627004 59627006 59627401 59635161 59638501 58638504 58638506 58638508 58640081 57640084 57640086 57640097 57640099 57640581 58640584 58640586 58640591 58641001 57641004 57641006 57641015 57641017 57641019 57656004 58656006 58656504 58656506 58659041 56659044 56659046 56659055 56660001 54660002 54660003 54660004 54660005 54660006 54661001 54661002 54661003 54661004 54661005 54661006 54670001 56670002 56670003 56670004 56670005 56670006 56

Cod. Pag.

670007 56670008 56670051 56670052 56714001 45714552 44715602 47719183 41720002 40721003 34721005 34721703 35721705 35721803 35721805 35722019 41

Inspired by water...

Oliveira & Irmão, S.A.Travessa do MilãoEsgueira3800 - 314 Aveiro, Portugal

T (+351) 234 300 200F (+351) 234 300 [email protected]

Oli S.r.l.Località Piani di Mura25070 Casto (BS) Italy

Tel.+39 0365 890611Fax +39 0365 879922 [email protected]

Uffi

cio

Pub

blic

ità O

LI -

A79

/1 F

ebbr

aio

2015

sanitary systems · 2019. 11. 6. · 4 for decades, oli has been developing and producing sanitary...

Documents