Trane Chiller Teardown

REFRIGERANT HCFC-123 RECOVERED TO 25 mm ABSOLUTE

EXTERNAL LINKAGE CAN BE REMOVED WHILE RECOVERING REFRIGERANT

SETUP TO DRILL AND REAM FOR TAPER DOWEL PINS REQUIRED FOR PRECISE REASSEMBLY

MATCH MARK ALL MATING PARTS BEFORE DISASSEMBLY

TAPER DOWEL PIN

IN PLACE

INSULATION REMOVED

FLANGE DRILLED FOR DOWEL PINS

THRUST BEARING END

NEED ORGANIZED STORAGE FOR ALL COMPONENTS REMOVED FROM MACHINE FOR ORDERLY REASSEMBLY

PULL STRAPS AGAINST VERTICAL LEG OF ELBOW

FOR BALANCE

CENTER LIFTING STRAPS ON TOP-

CENTER OF ELBOW

PUT ELBOW ON CART, SUPPORT SECURELY,

COVER TO PROECT, AND PLACE ASIDE IN A SAFE AREA

FIRST STAGE VANE ASSEMBLY WITH VANES IN OPEN POSITION

FIRST STAGE INLET GUIDE VANE LIFTING BRACKET

LIP ON END OF BRACKET TO CATCH INSIDE OF GUIDE VANE HOUSING

DOUBLE WIDE UNISTRUT WITH”BARNDOOR” STYLE TROLLEY

TO REMOVE “LIGHTER” COMPONENTS

Lifting Bracket inserted in

First Stage Inlet Guide Vane Assembly