certificate of conformity system couplerbox...translation of the original german certificate....

Certificate of Conformity Coupler

BAY05-VVTB-V001 | 2019/04/02 | english Mechanical coupler of rebars B500B with thread ribs

SYSTEM COUPLERBOX

12-32 mm

Tested by: Prüfstelle für Betonstahl Prof. Dr.-Ing. Gallus Rehm GmbH, Munich

Max Frank GmbH & Co. KG

Mitterweg 1 | 94339 Leiblfing | Germany | Phone +49 9427 189-0 | Fax +49 9427 1588 | info@maxfrank.com

530PZ05/04-INTGB-05/19 www.maxfrank.com

Translation of the original German certificate.According to German law only the German certificate is valid.

CERTIFICATION BODYPrüfstelle für Betonstahl

Prof. I)r.-Ing. Gallus Rehm GmbHFritz-Reuter-Straße 26, D-8 1245 München

Tel: +49 (0)89-882491 I Fax: +49 (0)89-8345466Pruefrehm@t-online.de

( DAKKS'.. Deutsche' Akkreditierungsstelle

D-ZE-18743-01-00

Certificate of Conformity(Reg. Nlr. BAY05-WTB-V001)

According to decree Art. 2l , par. 1 and 4 of the Country Bavaria with this it is confirmed,that the product

Mechanical coupler of rebars 85008with thread ribsSYSTEM COUPLERBOX12-32mm

ofthe producer

Max Frank GmbH & Co. KGMitterweg L

D - 94339 LEIBLFING

according to the results of the factory production control and the continuous surveillance

$Ü) performed by Prüßtelle Prof. Dr.-Ing. Gallus Rehm GmbH, Munich, as the inspec-

tion body approved by the building supervisory authority, is in conformity with the

regulations stated in approval no. Z-1.5-100.On condition that the factory production control fulfils the regulations and a validCertification exists, the producer is entitled to mark the product with the conformity mark(Ü-mark).The validity of this conformi24.5-100 dated March 15th,

Validity of the certificate: till March 3l't,2021.

ty certificate ends with the validity of the approval no

202t

I

.-Ing. H.Munich, April2"d,2019- Chief of Certification Body -

530PZ05/04-INTGB-05/19