theF

loor

heat

ereu

for a

prof

essio

nal la

yout

plan

Hous

e

theFloorheater eufor a professional layout plan

These data sheets can be performed withyour own company logo and corporate identity

supplying data for buildingswith a residential function

page 01

theFloorheater eufor a professional layout plan

For only a tube layout drawing fill in pages 1, 2 and 3For only a heat loss calculation fill in page 2 (only T area [°C]) and page 4For a tube layout drawing and a heat loss calculation fill in all fields

If certain values or details are unknown average values will be used.

Supply a drawing in a DWG or DXF extenstion. If you don't have these, a PDF can be converted to a DWG file or the PDFcan be used as an underlayer. A JPG (or another pixel extension) can also be used as an underlayer.

Supply water temperature [oC]

Screed type (cement, seamless floor, other ...)

Screed thickness [cm]

Tubes diameter [mm]

Isolation

Construction floor

Screed

Floor covering

Tube

Hart to hart distance C/CFloor structure

Remarks or comments

supplying data for buildingswith a residential function

page 02

theFloorheater eufor a professional layout plan

Remarks or comments

Rooms C/C [cm]* T room [oC] type floor covering

Table with common / average values of roomtemperatures in °C

Elderly and nursing homes oCLiving area 22Bathroom 25Toilet 18Technical area 18Unnamed 10Storage 10

Houses oCLiving area 20Bathroom 22Toilet 15Technical area 10Unnamed 10Storage 10

* If there is also a heat loss calculation to be made this field can be left open. These centre distance will be determined based on the heat loss calculation.

supplying data for buildingswith a residential function

page 03

theFloorheater eufor a professional layout plan

Remarks or comments

Name the positions of the manifold(s) if they are notshown on the drawing:How many groups can be used maxiumum on one manifold?

Supply- and returnpipes always through doorwaysAlways the shortest way for supply- and returnpipes (cutouts through walls)The shortest way for supply- and returnpipes but where possible trough doorways

Are there edge zones applied? yes/no | If yes, where?

Bifilar / Snail patternSpiral pattern

There is no floor cooling to be usedThere is floor cooling to be used

supplying data for buildingswith a residential function

page 04

theFloorheater eufor a professional layout plan

Is there ventilation to be used? yes/no If yes, choose one of the possibilities below:

Natural supply/natrural extractionNatural supply/mechanical extractionMechanical supply/natural extractionMechanical supply/mechanical extraction

Is the ventilation air pre-heated? yes/noIf yes, what is the supply temperature of the ventilation air?

Is there a night setback applied or a continuous operating system?

What kind of temperature control is there to be used:One central controller, In which room?Individual zone control per room

Partition wall Rc value

Enter the Rc Values for the different partitions walls

These data sheets can be performed withyour own company logo and corporate identity

supplying data for buildingswith an utility function

page 01

theFloorheater eufor a professional layout plan

For only a tube layout drawing fill in pages 1, 2 and 3For only a heat loss calculation fill in page 2 (only T area [°C]) and page 4For a tube layout drawing and a heat loss calculation fill in all fields

If certain values or details are unknown, average values will be used.

Supply a drawing in a DWG or DXF extenstion. If you don't have these, a PDF can be converted to a DWG file or the PDFcan be used as an underlayer. A JPG (or another pixel extension) can also be used as an underlayer.

Supply water temperature [oC]

Screed type (cement, seamless floor, other ...)

Screed thickness [cm]

Tubes diameter [mm]

Isolation

Construction floor

Screed

Floor covering

Tube

Hart to hart distance C/CFloor structure

Remarks or comments

page 02

theFloorheater eufor a professional layout plan

Remarks or comments

Rooms C/C [cm]* T room [oC] type floor covering

Table with common / average values of roomtemperatures in °C

Nursing -and health function oCLiving area 22Bathroom 25Toilet 18Technical area 18Unnamed 10Storage 10

Office function, education function, etc. oCLiving area 20Bathroom 22Toilet 15Technical area 10Unnamed 10Storage 10

* If there is also a heat loss calculation to be made this field can be left open. These centre distance will be determined based on the heat loss calculation.

supplying data for buildingswith an utility function

Remarks or comments

Name the positions of the manifold(s) if they are notshown on the drawing:How many groups can be used maxiumum on one manifold?

Supply- and returnpipes always through doorwaysAlways the shortest way for supply- and returnpipes (cutouts through walls)The shortest way for supply- and returnpipes but where possible trough doorways

Are there edge zones applied? yes/no | If yes, where?

Bifilar / Snail patternSpiral pattern

There is no floor cooling to be usedThere is floor cooling to be used

page 03

theFloorheater eufor a professional layout plan

supplying data for buildingswith an utility function

page 04

theFloorheater eufor a professional layout plan

supplying data for buildingswith an utility function

Is there ventilation to be used? yes/no If yes, choose one of the possibilities below:

Natural supply/natrural extractionNatural supply/mechanical extractionMechanical supply/natural extractionMechanical supply/mechanical extraction

Is the ventilation air pre-heated? yes/noIf yes, what is the supply temperature of the ventilation air?

Is there a night setback applied or a continuous operating system?

What kind of temperature control is there to be used:One central controller, In which room?Individual zone control per room

Partition wall Rc value

Enter the Rc Values for the different partitions walls

Is there a downgraded ceiling? yes/noIf yes, is this more or less open than 20% of the total area? more/less

These data sheets can be performed withyour own company logo and corporate identity

supplying data for buildingswith an industrial function

page 01

theFloorheater eufor a professional layout plan

For only a tube layout drawing fill in pages 1, 2 and 3For only a heat loss calculation fill in page 2 (only T area [°C]), 4 and 5For a tube layout drawing and a heat loss calculation fill in all fields

If certain values or details are unknown average values will be used.

Supply a drawing in a DWG or DXF extenstion. If you don't have these, a PDF can be converted to a DWG file or the PDFcan be used as an underlayer. A JPG (or another pixel extension) can also be used as an underlayer.

Supply water temperature [oC]

Screed type (cement, seamless floor, other ...)

Screed thickness [cm]

Tubes diameter [mm]

Isolation

Construction floor

Screed

Floor covering

Tube

Hart to hart distance C/CFloor structure

Remarks or comments

page 02

theFloorheater eufor a professional layout plan

Remarks or comments

Rooms C/C [cm]* T room [oC] type floor covering

Table with common / average values of temperatures in °C

* If there is also a heat loss calculation to be made this field can be left open. These centre distance will be determined based on the heat loss calculation.

Type of activity oClow activity: general sedentary work such as office, laboratory 20low activity: general sedentary work and occasionally getting up and walking 18moderate activity: light industry with hand and arm work or walk with speed between 3.5 and 5.5 km/h 15high activity: heavy industry with hand and arm work or carrying loads 12very high activity: heavy arm and trunk work and hauling 10

supplying data for buildingswith an industrial function

page 03

theFloorheater eufor a professional layout plan

Remarks or comments

Name the positions of the manifold(s) if they are notshown on the drawing:How many groups can be used maxiumum on one manifold?

Supply- and returnpipes always through doorwaysAlways the shortest way for supply- and returnpipes (cutouts through walls)The shortest way for supply- and returnpipes but where possible trough doorways

Are there edge zones applied? yes/no | If yes, where?

Bifilar / Snail patternSpiral pattern

There is no floor cooling to be usedThere is floor cooling to be used

supplying data for buildingswith an industrial function

page 04

theFloorheater eufor a professional layout plan

supplying data for buildingswith an industrial function

What kind of temperature control is there to be used:

optimizing control Not optimizing control with natural ventilation Not optimizing control with mechanical ventilation

Is there a discontinuous flow of material having a lower temperature? yes/noIf yes, what material and with which mass?

Is there heat gain of:

Continuous transit of hot products through space? yes/noIf yes, what is the average surface and surface temperature?

Heat generation by processes? yes/noIf yes, what is the electrical power?

Is there ventilation to be used? yes/no If yes, choose one of the possibilities below:

Natural supply/natrural extractionNatural supply/mechanical extractionMechanical supply/natural extractionMechanical supply/mechanical extraction

Is the ventilation air pre-heated? yes/noIf yes, what is the supply temperature of the ventilation air?

Is there a night setback applied or a continuous operating system?

What kind of temperature control is there to be used:One central controller, In which room?Individual zone control per room

page 05

theFloorheater eufor a professional layout plan

supplying data for buildingswith an industrial function

Partition wall Rc value

Enter the Rc Values for the different partitions walls

Is there any heat loss to cold surfaces? yes/noIf yes, what is the surface area and the average surface temperature?

Is there heat loss by local suction? yes/noIf yes, what is the flow rate of the exhaust air?which is the temperature of the supplied air?

Remarks or comments