casr part 66 b1 aircraft maintenance engineer · pdf fileinfo sheet. casr part 66 b1 aircraft...

INFO

SH

EET

CASR Part 66 B1 Aircraft Maintenance Engineer Licence The largest CASR and EASA Part 147 approved Maintenance Training Organisation in Australia.

RTO Aviation Australia

Name Aviation Australia Pty Ltd RTO No. 30770

Part 147 MTO No. CASA.147 MTO.0025

Training Package Details

Code MEA Version 1.3

Title Aeroskills Training Package

Purpose of Course

This information sheet lays out the requirements that need to be met to satisfy CASA for the grant, under CASR Part 66, of an Aircraft Maintenance Engineer Licence (B1.1, B1.2, B1.3 or B1.4), as per 66.A.25 and 66.A.30 of the CASR Part 66 Manual of Standards dated May 2016 Candidates must undergo a Recognition of Prior Learning (RPL) assessment during the initial enrolment phase to ensure that appropriate units of competency are selected for the category/sub-category of licence being sought (e.g. fixed wing or rotary wing, gas-turbine engines or piston engines). The pathways consists of:

• common and technical stream units required at Certificate IV level in the aircraft maintenance stream;

• additional diploma level common and imported units that cover supervisor level OHS competency plus competencies required by CASA for the exercise of licence privileges; and

• Diploma level mechanical technical stream units covering basic electrical, advanced fault diagnosis and structural repair/modifications.

Target Group These pathways apply to:

• Qualified individuals (trade qualified, Certificate IV qualified, licensed aircraft engineers domestic and foreign) seeking the grant of a CASA B1 Aircraft Maintenance Engineer Licence covering the supervision, performance and certification of mechanical maintenance on both un-typed and type-rated aircraft and engines.

Nationally Endorsed Training package (If applicable)

Code MEA

Version 1.3 Title Aeroskills Training Package

Reference Competency

Unit(s)

(If Applicable)

CASR Part 66 B1.1 (fixed-wing, gas-turbine) Aircraft Maintenance Engineers Licence

National Code Title Core / Elective

MEA101 Interpret occupational health and safety practices in aviation maintenance Core

MEA103 Plan and organise aviation maintenance work activities Core

MEA105 Apply quality standards applicable to aviation maintenance processes Core

MEA107 Interpret and use aviation maintenance industry manuals and specifications Core

MEA108 Complete aviation maintenance industry documentation Core

MEA109 Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance Core

MEA111 Perform administrative processes to prepare for certification of civil aircraft maintenance Core

MEA112 Plan and implement civil aircraft maintenance activities Core

MEA113 Supervise civil aircraft maintenance activities and manage human resources in the workplace Core

MEA116 Apply occupational health and safety procedures at supervisor level in aviation maintenance Core

MEA118 Conduct self in the aviation environment Core

MEA142 Manage self in the aviation maintenance environment Core

MEA201 Remove and install miscellaneous aircraft electrical hardware/components Core

MEA203 Remove and install advanced aircraft electrical system components Core

MEA208 Remove and install pressurisation control systems and components Core

MEA209 Remove and install oxygen systems and components Core

MEA211 Inspect, test and troubleshoot advanced aircraft electrical systems and components

Elective (or MEA 223 and 227)

MEA219 Inspect, test and troubleshoot aircraft pressurisation control systems and components Core

MEA222 Inspect, test and troubleshoot aircraft oxygen systems and components Core

MEA223 Inspect aircraft electrical systems and components Elective (or MEA211)

MEA227 Test and troubleshoot aircraft electrical systems and components Elective (or MEA211)

MEA246 Fabricate and/or repair aircraft electrical hardware or parts Core

MEA260 Use electrical test equipment Core

MEA301 Perform aircraft flight servicing Core

MEA302 Remove and install aircraft hydro-mechanical and landing gear system components Core

MEA303 Remove and install aircraft pneumatic system components Core

MEA305 Remove and install aircraft fixed-wing flight control systems and components Core

MEA306 Remove and install engines and engine system components Core

MEA307 Remove and install propeller systems and components Elective (if turbo-prop required)

MEA315 Inspect, test and troubleshoot propeller systems and components Elective (if turbo-prop required)

MEA317 Remove and install pressurised aircraft structural and non-structural components Core

MEA318 Inspect aircraft hydro-mechanical, mechanical, gaseous and landing gear systems and components Core

MEA319 Inspect gas turbine engine systems and components Core

MEA320 Test and troubleshoot aircraft hydro-mechanical, mechanical, gaseous and landing gear systems and components Core

MEA321 Test and troubleshoot aircraft fixed wing flight control systems and components Core

MEA322 Test and troubleshoot gas turbine engine systems and components Core

MEA323 Perform advanced troubleshooting in aircraft mechanical maintenance Core

MEA325 Weigh aircraft and perform aircraft weight and balance calculations as a result of modifications Core

MEA328 Maintain and/or repair aircraft mechanical components Core

MEA339 Inspect, repair and maintain aircraft structures Core

MEA343 Remove and install avionic system components Core

MEA357 Inspect, test and repair aircraft fabric surfaces Elective (fabric surfaces)

MEA358 Recover aircraft fabric surfaces Elective (fabric surfaces)

MEA359 Inspect and repair aircraft wooden structures Elective (wooden structures)

MEA365 Assess structural repair and modification requirements and evaluate structural repairs and modifications Core

MSAENV472B Implement and monitor environmentally sustainable work practices Core


Code MEA



Unit(s)

(If Applicable)

CASR Part 66 B1.2 (fixed-wing, piston-engine) Aircraft Maintenance Engineers Licence
















MEA208 Remove and install pressurisation control systems and components Core

MEA209 Remove and install oxygen systems and components Core



MEA219 Inspect, test and troubleshoot aircraft pressurisation control systems and components Core

MEA222 Inspect, test and troubleshoot aircraft oxygen systems and components Core








MEA305 Remove and install aircraft fixed wing flight control systems and components Core


MEA307 Remove and install propeller systems and components Core

MEA309 Inspect, test and troubleshoot aircraft hydro-mechanical and landing gear systems and components Core

MEA310 Inspect, test and troubleshoot aircraft pneumatic systems and components Core

MEA312 Inspect, test and troubleshoot aircraft fixed-wing flight control systems and components Core

MEA313 Inspect, test and troubleshoot piston engine systems and components Core

MEA315 Inspect, test and troubleshoot propeller systems and components Core

MEA317 Remove and install pressurised aircraft structural and non-structural components Core






MEA357 Inspect, test and repair aircraft fabric surfaces Elective (fabric surfaces)

MEA358 Recover aircraft fabric surfaces Elective (fabric surfaces)

MEA359 Inspect and repair aircraft wooden structures Elective (wooden structures)




Code MEA



Unit(s)

(If Applicable)

CASR Part 66 B1.3 (rotary-wing, gas-turbine) Aircraft Maintenance Engineers Licence

























MEA304 Remove and install non-pressurised aircraft structural and non-structural components

Elective (or MEA317)


MEA308 Remove and install rotary-wing rotor and flight control system components Core

MEA309 Inspect, test and troubleshoot hydro-mechanical and landing gear systems and components Core


MEA316 Inspect, test and troubleshoot rotary-wing rotor and control systems and components Core

MEA319 Inspect gas turbine engine systems and components Core

MEA322 Test and troubleshoot gas turbine engine systems and components Core







Code MEA



Unit(s)

(If Applicable)

CASR Part 66 B1.4 (rotary-wing, piston-engine) Aircraft Maintenance Engineers Licence

























MEA304 Remove and install non-pressurised aircraft structural and non-structural components

Elective (or MEA317)


MEA308 Remove and install rotary-wing rotor and flight control system components Core

MEA309 Inspect, test and troubleshoot aircraft hydro-mechanical and landing gear systems and components Core


MEA313 Inspect, test and troubleshoot piston engine systems and components Core

MEA316 Inspect, test and troubleshoot rotary-wing rotor and control systems and components Core






Assessment Method and Delivery Mode

CASR Part 66 The under-pinning theory is in line with the CASR Part 66 basic knowledge syllabus. The syllabus is modular in format with CASR Part 66 Multi-Choice-Question examinations as summative assessments as per 66.A.25 of the CASR Part 66 MOS. RPL towards the CASR Part 66 basic knowledge syllabus can only be given if candidates can evidence CAR31 CASA basics, CASR Part 66 Modules, EASA Member State Part 66 Modules, overseas licence holders that AA are approved to give credit from or, ADF Personnel that hold the relevant rank and maintenance authorisations. For units of competency that don’t align with Part 66 modules (e.g. MSAENV472B Implement and monitor environmentally sustainable work practices and MEA142 Manage self in the aviation maintenance environment), candidates will be assessed through online training courses with work-based assignments or, candidates have the opportunity to provide evidence of competence through the RPL process. Practical Competency Practical competency is initially determined through the process of RPL and unit accreditation. Any gaps in competency can be gained on-the-job via a competency journal-of-experience accompanied by evidence of the maintenance carried out.

Duration Varies. Post RPL Candidates can choose to self-study the training material and sit the required examinations/essays, or attend scheduled instructor led classes, or a combination of both.

Costing • $2,000 enrolment/RPL/Journal of Experience/certification fee

• The remaining costs for training material and CASR Part 66 examinations can only be determined by RPL and are therefore in addition to the above fee.

Pre-requisites for certification

As per 66.A.30 of the CASR Part 66 Manual of Standards (May 2016) – candidates need to prove a minimum of 3 years (B1.2 and B1.4) or 4 years (B1.1 and B1.3) working in category/sub-category with a minimum of 12 months of experience accumulated immediately before application of licence.

Outcome • An Australian Qualification Framework (AQF) Statement of Attainment for units of competency achieved,

or,

• For B1.1 and B1.3 only: Issuance of MEA50215 Diploma of Aeroskills (Mechanical) if the competencies meet the packaging requirements of the Aeroskills Training Package (this involves the candidate also satisfying unit of competency MEA148), and,

• CASR Part 147 Certificate of Recognition for CASR Part 66 basic knowledge examinations/essays passed at over 75%, and,

• CASA Form 465 submission once the full requirements of 66.A.25 and 66.A.30 of the CASR Part 66 Manual of Standards (May 2016) have been met.

Annex A

CASR Part 66 basic knowledge syllabus:

CASR Part 66 B1.1 Basic Knowledge Modules

Subject Modules Title

1 Mathematics

2 Physics

3 Electrical Fundamentals

4 Electronic Fundamentals

5 Digital Techniques electronic instrument systems

6 Materials and hardware

7 Maintenance Practices

8 Basic Aerodynamics

9 Human Factors

10 Aviation Legislation

11 Aeroplane Aerodynamics, structures and systems

15 Gas Turbine Engine

17 Propeller *only required if a turbo-prop outcome is sought

Annex B




1 Mathematics

2 Physics







9 Human Factors


11 Aeroplane Aerodynamics, structures and systems

16 Piston Engine

17 Propeller

Annex C




1 Mathematics

2 Physics







9 Human Factors


12 Helicopter Aerodynamics, structures and systems

15 Gas Turbine Engine

Annex D




1 Mathematics

2 Physics







9 Human Factors


12 Helicopter Aerodynamics, structures and systems

16 Piston Engine

casr part 66 b1 aircraft maintenance engineer · pdf fileinfo sheet. casr part 66 b1 aircraft...

Documents