2011 Sony Corporation

Color Video Camera

EVI-D80N/P/D90N/P

A-E4V-100-12(1)

Technical Manual

2

Table of Contents

Features ............................................................................. 3

Connection ........................................................................ 4

Locations of Controls ....................................................... 5

Basic Functions ................................................................. 8Overview of Functions .....................................................................8Initial Settings and Position Preset ........................................... 15Mode Condition .............................................................................. 16

Command List .................................................................21VISCA1) RS-232C Commands ....................................................... 21EVI-D80N/D80P/D90N/D90P Commands .............................. 29

D70 Mode ........................................................................44Overview ........................................................................................... 44Switching the Mode ...................................................................... 44Accepting or Sending Back Commands ................................. 45Translating Parameters ................................................................. 46

Specifications .................................................................48

Precautions .....................................................................52

3

Features

AnEX-viewHAD™CCDfeatures380,000(NTSC)or440,000(PAL)effectivepictureelementsandhighsensitivityshooting.Theminimumilluminationrequiredis0.7lx(1/60sec.(NTSC),1/50sec.(PAL),ICROFF).(EVI-D90N/D90P)

ACCDfeatures380,000(NTSC)or440,000(PAL)effectivepictureelementsandhigh-sensitivityshooting.Theminimumilluminationrequiredis0.4lx(1/60sec.(NTSC),1/50sec.(PAL)).(EVI-D80N/D80P)

TheEVI-D90N/D90Pareequippedwithabrightzoomlenswith28×opticalzoomandF1.35aperture.

TheEVI-D80N/D80Pareequippedwithabrightzoomlenswith18×opticalzoom.

Anewly-developedProcessorprovideshighresolutionimages.

Byadoptingitswideanddynamicrangefunctions,youcanseetheoptimisedshootingimagewhichincorporatesbrightanddarksubjectsatthesametime.(EVI-D90N/D90P)

3DLow-noiseimagescanbeobtainedeveninlow-lightenvironmentsusingtheNoiseReductionfunction.

AdoptstheindustrystandardRS-232CinterfaceofVISCAcameraprotocolinexternalcommunication.ItispossibletooperatefromlongdistancesbyusingbothRS-232CandRS-422.

Youcaninstallthecameraonceilingsduetothefunctionsofhigh-speedandwiderangepan/tiltactionandverticalimageflip.

Youcanusetheinfraredremotecommandertosetthecameraandalsotoselectpanning,tiltingandzoomingfromthesettingmenu.

Youcanstoreupto6kindsofcameradirectionandcamerastatusintothecamera.

4

Connection

Notes

YoucannotconnectyourColorVideoCameratoacomputerthatisnotequippedwitheithervideoinputoranS-Videoinputconnector.YoumightnotbeabletouseyourexistingcomputerwithyourColorVideoCameraunlessyouprovidethecomputerwithavideocaptureboardand/orsoftware.Consultyourcomputerdealerormanufacturerfordetails.

UseonlytheACpoweradaptor(JEITAtype4)suppliedwiththeunit.DonotuseanyotherACpoweradaptor.

Polarity of the plug

DonotmakeVISCARS-232CandRS-422connectionsatthesametime,asthismaycausemalfunctions.

1) WhenthecameraisconnectedtoacomputerwithaVISCAcable(crosstype,RS-232C),youcanoperatethecamerawiththecomputer.Toobtainacable,consultthedealerwhereyouboughtyourcamera.

2) FordetailsonhowtoconnectusingVISCARS-422,seepage26.

S-Video cable (not supplied)

to S-Video input

to VISCA IN

VISCA cable (not supplied)1)

to RS-232C

Video cable (not supplied)

AC power adaptor (supplied)

to DC 12V

to AC outlet

Power cord (supplied)

to VIDEO

to S VIDEO

Computer, TV or VCR with a video input jack

to VISCA RS-4222)

to Video input

to VISCA OUT To VISCA IN of other EVI-D80N/D80P/D90N/D90P (when connecting to more than one camera)

�

Locations of Controls

(Continued)

Lens

Remotesensors

POWERlamp

STANDBYlampFor detailed information on LED status of the POWER lamp and STANDBY lamp, see “LED Status” on page 43.

Remotesensors

Front Rear

Bottom

MainUnit

6

Locations of Controls

IMAGE FLIP switchFlipstheimageupsidedown.NormallysetthistoOFFwhenyouusethecamera.Whenthecameraisattachedtotheceiling,setthistoON.BeforeyousettheIMAGEFLIPswitch,turnofftheunit(orsettostandbymode)andthen,turnthepoweronbyconnectingthepoweradaptor,byVISCAcontrolortheremotecommander.Whenyouswitchthis,thepresetsettingisreturnedtotheinitialsetting.Ittakesabout7to14secondsfortheimagedisplayedtorespondtothesettingchange.

IR SELECT switch

VISCA RS-422 connector

VIDEO(output) connector

S VIDEO(output) connector

VISCA IN connector

VISCA OUT connector

DC 12V connector

Tripod screw hole

BOTTOM switches

1 2 3 4 5

D70 mode switchSettoONtousetheVISCAcommandforEVI-D70/D70P.

IR OUT switchSettoONtoenableoutputofthereceiversignals,whicharetransmittedfromtheinfraredremotecommanderviatheVISCAINconnector(page25),orsetittoOFFtodisabletheoutput.

RS-232C/RS-422 select switchSettoONtooperatecolourvideocamerausingtheVISCAcommandviatheRS-422interface.Tochangethemode,turnoffthecamera(notincludingstandbymode)first,settheswitchandthenturnonthecameraagain.Modeswitchingisnotpossiblewhilethecameraisturnedon.

Baud rate select switchSettoONfor38,400bpsorOFFfor9,600bps.Tochangethemode,turnoffthecamera(notincludingstandbymode)first,settheswitchandthenturnonthecameraagain.Themodecannotbeswitchedwhilethecameraisturnedon.

Switch 5 (Not used)BesuretosetthisswitchtoOFF.

Ceiling bracket mounting screw holes

Remote Commander

CAMERA SELECT buttonsPressthebuttoncorrespondingtothecamerayouwanttooperatewiththeRemoteCommander.ThecameranumbercanbesetusingtheIRSELECTswitchontherearofthecamera.

Note

Iftwoormorecamerasareadjacentandhavethesamecameranumber,theyareoperatedsimultaneouslywiththesameRemoteCommander.Whenyouinstallthecamerasclosetoeachother,setdifferentcameranumbers.Forthecameranumbersetting,see“OperatingMultipleCameraswiththeRemoteCommander”describedintheOperatingInstructionssuppliedwiththecamera.

FOCUS buttonsUsedforfocusadjustment.PresstheAUTObuttontoadjustthefocusautomatically.Toadjustthefocusmanually,presstheMANUALbutton,andadjustitwiththeFARandNEARbuttons.

DATA SCREEN buttonPressthisbuttontodisplaythemainmenu.Pressitagaintoturnoffthemenu.Ifyoupressthebuttonwhenalower-levelmenuisselected,thedisplaygoesbacktoahigher-levelmenu.

Note

Pan/tiltoperationsaredisabledwhenthemenuisdisplayed.

�

Locations of Controls

PAN-TILT buttonsPressthearrowbuttonstoperformpanningandtilting.PresstheHOMEbuttontofacethecamerabacktothefront.Whenthemenuisdisplayed,useortoselectthemenuitemsandortochangethesetvalues.Theselectedsettingmenuisdisplayed,bypressingtheHOMEbuttonwhenthemainmenuisdisplayed.ThePan/tiltspeedwillslowdownwhenthecameraiszoomed,inordertoallowprecisepositioning.

L/R DIRECTION SET buttonHolddownthisbuttonandpresstheREVbuttontochangethedirectionofthecameramovementoppositetothatindicatedbythearrowofthe/buttons.Toresetthedirectionofthecameramovement,presstheSTDbuttonwhileholdingdownthisbutton.

POWER switchPressthisbuttontoturnon/offthecamerawhenthecameraisconnectedtoanACoutlet.

BACK LIGHT buttonPressthisbuttontoenablethebacklightcompensation.Pressitagaintodisablethebacklightcompensation.

POSITION buttonsHolddownthePRESETbuttonandpressbutton1to6tostorethecurrentcameradirection,zooming,focusadjustmentandbacklightcompensationinthememoryofthepressednumberbutton.Toerasethememorycontents,holddowntheRESETbuttonandpressbutton1to6.

Note

Thesebuttonsdonotfunctionwhenthemenuisdisplayed.

PAN-TILT RESET buttonPressthisbuttontoresetthepan/tiltposition.

ZOOM buttonsUsetheSLOWbuttontozoomslowly,andtheFASTbuttontozoomquickly.PresstheT(telephoto)sideofthebuttontozoomin,andtheW(wideangle)sidetozoomout

8

Basic Functions

Overview of Functions

Zoom

EVI-D80N/P: Thecameraemploysa18×opticalzoomlenscombinedwithadigitalzoomfunction;thiscameraallowsyoutozoomupto216×.

• Optical 18×, f = 4.1 mm to 73.8 mm (F 1.4 to F 3.0)

Thehorizontalangleofviewisapproximately48.0degrees(wideend)to2.8degrees(teleend).DigitalZoomenlargesthecenterofthesubjectbyexpandingeachimageinboththeverticalandhorizontaldirections.When216×zoomisused,thenumberofeffectivepictureelementsineachdirectionreducesto1/12andtheoverallresolutiondeteriorates.

EVI-D90N/P: Thecameraemploysa28×opticalzoomlenscombinedwithadigitalzoomfunction;thiscameraallowsyoutozoomupto336×.

Optical 28×, f = 3.5 mm to 98.0 mm (F 1.35 to F 3.7)Thehorizontalangleofviewisapproximately55.8degrees(wideend)to2.1degrees(teleend).DigitalZoomenlargesthecenterofthesubjectbyexpandingeachimageinboththeverticalandhorizontaldirections.When336×zoomisused,thenumberofeffectivepictureelementsineachdirectionreducesto1/12andtheoverallresolutiondeteriorates.

Youcanactivatethezoominthefollowingtwoways

By pressing the ZOOM buttons on the Remote Commander

Using a VISCA CommandUsing Standard ModeUsing Variable ModeThereareeightlevelsofzoomspeed.Direct ModeSettingthezoompositionenablesquickmovementtothedesignatedposition.

Digital Zoom ON/OFFIn these standard and variable Speed Modes, it is necessary to send Stop Command to stop the zoom operation.

Focus

Focushasthefollowingmodes,allofwhichcanbesetusingVISCACommands.

Auto Focus Mode Theminimumfocusdistanceis10mmattheoptical

wideendand800mm(EVI-D80N/P),1500mm(EVI-D90N/P)attheopticalteleend,andisindependentofthedigitalzoom.TheAutoFocus(AF)functionautomaticallyadjuststhefocuspositiontomaximisethehighfrequencycontentofthepictureinacentermeasurementarea,takingintoconsiderationthehighluminanceandstrongcontrastcomponents.

- Normal AF ModeThisisthenormalmodeforAFoperations.- Interval AF ModeThemodeusedforAFmovementscarriedoutatparticularintervals.ThetimeintervalsforAFmovementsandforthetimingofthestopscanbesetinone-secondincrementsusingtheSetTimeCommand.Theinitialvalueforbothissettofiveseconds.- Zoom Trigger ModeWhenthezoomischangedwiththeZOOMbuttonsontheRemoteCommander,thepre-setvalue(initiallysetat5seconds)becomesthatforAFMode.Then,itstops.

AFsensitivitycanbesettoeitherNormalorLOW.- NormalReachesthehighestfocusspeedquickly.Usethiswhenshootingasubjectthatmovesfrequently.Usually,thisisthemostappropriatemode.- LOWImprovesthestabilityofthefocus.Whenthelightinglevelislow,theAFfunctiondoesnottakeeffect,eventhoughthebrightnessvaries,contributingtoastableimage.

9

Basic Functions

Manual Focus ModeManualFocushasbothaStandardSpeedModeandaVariableSpeedMode.StandardSpeedModefocusesatafixedrateofspeed.VariableSpeedModehaseightspeedlevelsthatcanbesetusingaVISCACommand.

In these standard and variable Speed Modes, it is necessary to send Stop Command to stop the zoom operation.

One Push Trigger ModeWhenaTriggerCommandissent,thelensmovestoadjustthefocusforthesubject.ThefocuslensthenholdsthatpositionuntilthenextTriggerCommandisinput.

Infinity ModeThelensisforciblymovedtoapositionsuitableforanunlimiteddistance.

Near Limit ModeCanbesetinarangefrom1000(∞)toC000(10mm).Defaultsetting(EVI-D80N/P):8000h(29cm)Defaultsetting(EVI-D90N/P):9000h(30cm)

White Balance

WhiteBalancehasthefollowingmodes,allofwhichcanbesetusingVISCACommands.

Auto White Balance Thismodecomputesthewhitebalancevalueoutput

usingcolorinformationfromtheentirescreen.Itoutputsthepropervalueusingthecolortemperatureradiatingfromablacksubjectbasedonarangeofvaluesfrom3,000to7,500K.

Thismodeisthedefaultsetting.

Indoor 3,200KBaseMode

Outdoor 5,800KBaseMode

One Push WB TheOnePushWhiteBalancemodeisafixedwhite

balancemodethatmaybeautomaticallyreadjustedonlyattherequestoftheuser(OnePushTrigger),assumingthatawhitesubject,incorrectlightingconditionsandoccupyingmorethan1/2oftheimage,iscapturedbythecamera.

OnePushWhiteBalancedataislostwhenthepoweristurnedoff.Ifthepoweristurnedoff,resettheOnePushWhiteBalance.

Manual WB ManualcontrolofRandBgain,256stepseach

Automatic Exposure ModeAvarietyofAEfunctionsareavailableforoptimaloutputofsubjectsinlightingconditionsthatrangefromlowtohigh.

Full Auto Exposureisadjustedautomaticallybygain,irisand

electronicshuttersetting.

AE Gain Limit Setting ThegainlimitcanbesetattheFullAuto,Shutter

PriorityandIrisPriorityintheAEmode.Usethissettingwhenimagesignal-to-noiseratioisparticularlyimportant.

Shutter Priority 1)

VariableShutterSpeed,AutoIrisandGain(1/1to1/10,000sec.,16high-speedshutterspeedsplus6low-speedshutterspeeds)

1)Flickercanbeeliminatedbysettingshuttertot1/100sforNTSCmodelsusedincountrieswitha50Hz powersupplyfrequencyt 1/120sforPALmodelsusedincountrieswitha60Hz powersupplyfrequency

Iris Priority VariableIris(F1.4*toClose,18steps),AutoGain

andShutterspeed

Manual VariableShutter,IrisandGain

Bright VariableIrisandGain(ClosetoF1.4*,17stepsat

0dB:F1.4*,15stepsfrom0to28dB)*ForEVI-D80N/PthissettingisF1.4,EVI-D90N/PisF1.35.

AE – Shutter PriorityTheshutterspeedcanbesetfreelybytheusertoatotalof22steps–16highspeedsand6lowspeeds.Whentheslowshutterisset,thespeedcanbe1/30s,1/15s,1/8s,1/4s,1/2s,1/1s.Thepictureoutputisreadatanormalratefromthememory.ThememoryisupdatedatalowratefromtheCCD.AFcapabilityislow.Inhighspeedmode,theshutterspeedcanbesetupto1/10,000s.Theirisandgainaresetautomatically,accordingtothebrightnessofthesubject.

10

Basic Functions

Data NTSC (s) PAL (s)

15 1/10000 1/10000

14 1/6000 1/6000

13 1/4000 1/3500

12 1/3000 1/2500

11 1/2000 1/1�50

10 1/1500 1/1250

0F 1/1000 1/1000

0E 1/�25 1/600

0D 1/500 1/425

0C 1/350 1/300

0B 1/250 1/215

0A 1/180 1/150

09 1/125 1/120

08 1/100 1/100

0� 1/90 1/�5

06 1/60 1/50

05 1/30 1/25

04 1/15 1/12

03 1/8 1/6

02 1/4 1/3

01 1/2 1/2

00 1/1 1/1

AE – Iris PriorityTheiriscanbesetfreelybytheuserto18stepsbetweenF1.6andClose.Thegainandshutterspeedaresetautomatically,accordingtothebrightnessofthesubject.

Data Setting value Data Setting value

11 F1.4* 08 F6.8

10 F1.6 0� F8

0F F2 06 F9.6

0E F2.4 05 F11

0D F2.8 04 F14

0C F3.4 03 F16

0B F4 02 F19

0A F4.8 01 F22

09 F5.6 00 CLOSE

*ForEVI-D80N/PthissettingisF1.4,EVI-D90N/PisF1.35.

AE – ManualTheshutterspeed(22steps),iris(18steps)andgain(16steps)canbesetfreelybytheuser.

AE – BrightThebrightcontrolfunctionadjustsbothgainandirisusinganinternalalgorithm,accordingtoabrightnesslevelfreelysetbytheuser.Exposureiscontrolledbygainwhendark,andbyiriswhenbright.Asbothgainandirisarefixed,thismodeisusedwhenexposingatafixedcamerasensitivity.WhenswitchingfromFullAutoorShutterPriorityModetoBright

Mode,thecurrentstatuswillberetainedforashortperiodoftime.OnlywhentheAEmodeissetto“FullAuto”or“ShutterPriority,”canyouswitchitto“Bright.”

MIN

MAX

AGC

CLOSE

OPEN

IRIS

Gain

Dark Bright

IRIS gain curve

Controlled by gain

Controlled by IRIS

Bright limit controllable for this unit

AGC gain curve

Data Iris Gain Data Iris Gain

1F F1.4* 28 dB 0F F2 0 dB

1E F1.4* 26 dB 0E F2.4 0 dB

1D F1.4* 24 dB 0D F2.8 0 dB

1C F1.4* 22 dB 0C F3.4 0 dB

1B F1.4* 20 dB 0B F4 0 dB

1A F1.4* 18 dB 0A F4.8 0 dB

19 F1.4* 16 dB 09 F5.6 0 dB

18 F1.4* 14 dB 08 F6.8 0 dB

1� F1.4* 12 dB 0� F8 0 dB

16 F1.4* 10 dB 06 F9.6 0 dB

15 F1.4* 8 dB 05 F11 0 dB

14 F1.4* 6 dB 04 F14 0 dB

13 F1.4* 4 dB 03 F16 0 dB

12 F1.4* 2 dB 02 F19 0 dB

11 F1.4* 0 dB 01 F22 0 dB

10 F1.6 0 dB 00 CLOSE 0 dB

*ForEVI-D80N/PthissettingisF1.4,EVI-D90N/PisF1.35.

WhenswitchingfromtheShutterPrioritymodetotheBrightmode,theshutterspeedsetintheShutterPrioritymodeismaintained.

11

Basic Functions

Exposure Compensation

ExposurecompensationisafunctionwhichoffsetstheinternalreferencebrightnesslevelusedintheAEmodebystepsof1.5dB.

Data Step Setting value

0E +� +10.5 dB

0D +6 +9 dB

0C +5 +�.5 dB

0B +4 +6 dB

0A +3 +4.5 dB

09 +2 +3 dB

08 +1 +1.5 dB

0� 0 0 dB

06 –1 –1.5 dB

05 –2 –3 dB

04 –3 –4.5 dB

03 –4 –6 dB

02 –5 –�.5 dB

01 -6 -9 dB

00 -� -10.5 dB

High Resolution Mode

AnewlydevelopedISPfunctionenablesthefilteringofsignals.Thisallowsthecameratoprovideimageswithahighresolution.

Aperture Control

Aperturecontrolisafunctionwhichadjuststheenhancementoftheedgesofobjectsinthepicture.Thereare16levelsofadjustment,startingfrom“noenhancement.”Whenshootingtext,thiscontrolmayhelpbymakingthetextsharper.

Back Light Compensation

Whenthebackgroundofthesubjectistoobright,orwhenthesubjectistoodarkduetoshootingintheAEmode,backlightcompensationwillmakethesubjectappearclearer.

Wide Dynamic Range Mode (WD) (EVI-D90N/P only)

TheWideDynamicRangemodeisafunctionfordividinganimageintoseveralblocksandcorrectingblocked-upshadowsandblown-outhighlightsinaccordancewiththeintensitydifference.Itenablesyoutoobtainimagesinwhichportionsrangingfromdarktolightcanberecognized,evenwhencapturingasubjectwithalargeintensitydifferencethatisbacklitorincludesextremelylightportions.ACCDforshootingawidedynamicrangeisemployed,andanewlydevelopedimagesignalprocessorcombinesalongexposuresignal(normalshutter)andasignalofthehighintensityportionsobtainedbyashortexposure(high-speedshutter)toachieveimageswithawidedynamicrange.

Wide Dynamic Range Auto On/Off ModeThewidedynamicrangecanbesettobeautomaticallyswitchedON/OFFinaccordancewiththeintensitydifferenceobtainedbydividinganimageintoseveralblocksandthenaveragingtheintensityofeachblock.

Wide Dynamic Range Auto On/Off Mode

Auto On/Off

When the intensitydifference between thedark portions and lightportions of a subjectbecomes large becauseof back lighting or thelike, the wide dynamicrange mode is switchedON.

When the subjectchanges and theintensity differencebetween the darkportions and lightportions becomessmall, the wide dynamicrange mode is switchedOFF.

12

Basic Functions

Thewidedynamicrangemodeincludesthefollowingoperationmodes.

WD ModeThismodecorrectsblocked-upshadowsandblownouthighlightsinaccordancewiththeintensitydifference.

WD Auto ON/OFF ModeThismodeswitchesWDON/OFFautomaticallyinaccordancewiththeintensitydifferenceofthesubject.ConfigurethesensitivityforwhenWDisswitchedfromOFFtoONwiththedetectionsensitivityparameter.

Exposure Ratio ModeThismodefixestheshutterspeedofashortexposure.Configuretheshutterspeedofalongexposurebysettingtheratiowithregardstoashortexposurewiththeexposureratioparameter.Blocked-upshadowcorrectionisnotperformedinthismode.

Histogram ModeThismodeusesahistogramtocorrectblocked-upshadowsandblown-outhighlights.

About WD Set Parameter (Command: 8x 01 04 2D 0p 0q 0r 0s 0t 0u 00 00 FF)p: Screendisplay(0:Combinedimage,1:Long/short

division,2:Long-time,3:Short-time)SetthescreendisplaytoaWDcombinationimage,long/shortexposuredivisionimage,longexposureimage,orshortexposureimage.

q: Detectionsensitivity(0:Low,1:Mid,2:Hi)SelectfromthreelevelsfordetectingtheintensitywithintheimageforwhenswitchingAutoWDfromOFFtoON.

r: Blocked-upshadowcorrectionlevelcanbesettooneoffourlevels.(0:L1:M2:H3:S)

s: Blown-outhighlightcorrectionlevelcanbesettooneofthreelevels.(0:L1:M2:H)

tu: Parametertouseintheexposureratiomode.Specifytheshortexposuretimebysettingthemagnificationratio(×1to×150)withregardstoalongexposuretime.

Note

WhenthewidedynamicrangemodeisON,solariza-tionmaybeobservedintheimagesofsomesubjects.Thisphenomenonisuniquetowidedynamicrangemode,andisnotanindicationofacameramalfunction.

Noise Reduction

TheNR(NoiseReduction)functionremovesnoise(bothrandomandnon-random)toprovideclearerimages.Bycombining2Dfilteringaccordingtobrightnessandimagecolor,and3Dfilteringaccordingtonoisecausedbymotionandtimedifference,lowernoiseimagescanbeobtainedforthecorrespondingimagebrightnessofamovingsubject.Thisfunctionhassixsteps:levels1to5,plusoff.Level1appliestosubjectmotionmainlyusing2Dfiltereffects.Withlevel5,2Dand3Dfiltereffectsaremaximized,providingthelowest-noiseimages,althoughmovingsubjectsmayshowtrails.Ateachlevel,twofiltersaresetaccordingtonoiseandimagemotioncharacteristics,sotheavailablelevelselectionsdependonthesituation.Thedefaultsettingislevel3.

Image Stabilizer (EVI-D90N/P only)

SwitchingONtheImageStabilizerfunctionreducesimageblurringcausedby,forexample,vibration,whichallowsyoutoobtainimageswithoutmuchblurring.Acorrectioneffectofapproximately90%ispossibleforavibrationfrequencyofaround10Hz.TheImageStabilizerfunctionemploysthedigitalzoomsystem,sotheangleofviewandresolutionarechanged,butthesensitivityismaintained.

Hold Function of Image Stabilizer

WiththeImageStabilizerfunction,suddenlystoppinghigh-speedmovement(pan,tilt,etc.)ofthecameraproducesablursensorcounteractionthatmaycauseimagemovement.Insuchacase,youcanuseacommandsetting(hold)tomaintainthecorrectionoftheImageStabilizerfunction.Inthiscasetheimagestabilizerisoff,butthereisnochangeintheangleofview.

13

Basic Functions

Slow shutter – Auto/Manual

Whensetto“Auto,”ensuresthattheslowshutterissetautomaticallywhenthebrightnessdrops.EffectiveonlywhentheAEmodeissetto“FullAuto.”Setto“SlowShutterManual”atshipment.

Note

TheSlowShutterAutofunctionisnotavailableinWDmode

ICR (IR Cut-Removable) Mode (EVI-D90N/P only)

Aninfrared(IR)Cut-Filtercanbedisengagedfromtheimagepathforincreasedsensitivityinlowlightenvironments.TheICRwillautomaticallyengagedependingontheambientlight,allowingthecameratobeeffectiveinday/nightenvironments.WhentheautoICRmodeissettoON,theimagebecomesblackandwhite.

Auto ICR Mode (EVI-D90N/P only)

AutoICRModeautomaticallyswitchesthesettingsneededforattachingorremovingtheIRCutFilter.Withasetlevelofdarkness,theIRCutFilterisautomaticallydisabled(ICRON),andtheinfraredsensitivityisincreased.Withasetlevelofbrightness,theIRCutFilterisautomaticallyenabled(ICROFF).Also,onsystemsequippedwithanIRlight,theinternaldataofthecameraisusedtomaketheproperdecisionstoavoidmalfunctions.AutoICRModeoperateswiththeAEFullAutosetting.

ICR

SHUTTER

Dark Bright

AGCMAX

IRISOPEN

Shutter 1/60 sec

ICR OFF ON

GAIN

ICR ON

IRIS

When Auto Slow Shutter is OFF (initial setting)

When Auto Slow Shutter is ON

Note

WheninAuto_ICR_OFFstateandWBdataisadded(default),amalfunctionmayoccurwhenthesubjectslargelyconsistingofblueandgreencolorsaretaken.

Camera ID

TheIDcanbesetupto65,536(0000toFFFF).Asthiswillbememorizedinthenonvolatilememoryinsidethecamera,datawillbesavedregardlessofwhetherithasbeenbackedup.

Effect

Itconsistsofthefollowingfunctions.•Neg. Art:Negative/PositiveReversal•Black White:MonochromeImage

14

Basic Functions

Memory (Position Preset)Using the position preset function, 6 sets of camera shooting conditions can be stored and recalled.This function allows you to achieve the desired status instantly without adjusting the following items each time.

Pan/TiltPosition ZoomPosition DigitalZoomOn/Off FocusAuto/Manual FocusPosition AEMode Shuttercontrolparameters BrightControl Iriscontrolparameters Gaincontrolparameters ExposureCompensationOn/Off ExposureLevel BacklightCompensationOn/Off SlowShutterAuto/Manual WhiteBalanceMode R/BGain Aperture ICRShootOn/Off(EVI-D90N/Ponly) WDOn/Off(EVI-D90N/Ponly)

The settings are recalled when the power is turned on.

For setting items, see the “Initial Settings, Position Preset” section on page 15.

Note

If the camera is placed on a desk, when you pan the camera to the right or left beyond 120° with the camera tilted downward by 20° (or tilted upward by 20° if it is installed on a ceiling), the camera base may be captured by the lens, depending on the zoom position of the lens.

CCD Readout Mode (EVI-D90N/P only)

You can switch CCD Readout Mode of the camera to Interlace/Progressive. The picture output for Progressive is 29.97 fps or 25 fps.

Checking the Location of the Camera for Signals from the IR Remote Commander

The supplied Remote Commander may not work correctly near inverter lighting fixtures. Good IR detection can be verified to determine proper camera location. While the camera is being initialized after the power is turned on by connecting the camera to an AC outlet using the AC power adaptor and AC power cord, or by using a VISCA command, the camera detects whether or not the camera is able to receive infrared signals from the Remote Commander. You can check the result of this operation via the IR_ConditionInq command (see page 34).

When the installation location does not allow stable reception, try to install the camera farther away from the inverter lighting fixtures.

Others

PowerOn/OffPowers the camera on and off. When the power is off, the camera is able to accept only the lowest level of VISCA Commands and POWER of the Remote Commander; the display and other features are turned off.

I/FclearClears the Command buffer of the camera. Clearing the buffer can also be carried out from the control application software when the power is on.

AddresssetVISCA is a protocol, which normally can support a daisy chain of up to seven attached devices. Therefore, whenever a camera is connected for the first time, be sure to use the address set to confirm the address.

15

Basic Functions

Theinitialvaluesarethosesetatthefactory.SettingsforitemsinPositionpresets1to6thatwillberetainedevenwhenthepowertothecameraisturnedoffareindicatedbya“Yes,”thosethatwillbelostareindicatedbyan“No.”Whenthepoweristurnedon,thesettingsretainedin

POSITION1willbecalledupastheinitialsettings.WhenaCAM_MemoryResetcommandissent,ora

choiceismadefromPOSITION1to6whiletheRESETbuttonontheRemoteCommanderisbeingpressed,thesettingsselectedwillbeusedastheinitialsettings.

Positionpreset1becomesVISCAcommandCAM_Memorymemorynumber0.Positionpresets2through6becomeVISCAcommandCAM_Memorymemorynumbers1through5.

Initial Settings and Position Preset

Mode/Position Initial settings Position preset 1

Position presets 2 to 6

Pan/Tilt Position Home position

Pan/Tilt Limit Position movable-range maximum

Zoom Position Wide end a a

D-Zoom On/Off on a a

Focus Position — a a

Focus Auto/Manual Auto a a

Near Limit Setting 8000h (29 cm) 2) a AF Sensitivity Normal a AF Mode Normal a AF Run Time 5 sec a AF Interval 5 sec a WB Mode Auto a a

WB Data (Rgain, Bgain) — a a

One Push WB Data — a AE Mode Full Auto a a

WD On/Off/Auto 1) Off a a

Slow Shutter Mode Manual a a

Shutter Position 1/60sec (NTSC), 1/50sec (PAL) a a

Iris Position — a a

Gain Position — a a

Bright Position — a a

Exposure Compensation On/Off Off a a

Exposure Compensation Amount ±0 a a

BackLight On/Off Off a a

Aperture Level 6 a a

High Resolution Mode On/Off Off a Picture Effect Off a ICR On/Off 1) Off a a

Auto ICR On/Off 1) Off a Auto ICR Threshold Level 1) 0Ah a Image Stabilizer On/Off/Hold 1) Off a NR Level 3 a AE Gain Limit — a IR_Receive On/Off On a IR_ReceiveReturn On/Off Off a Display Information On a

1)ThesettingisavailableonEVI-D90N/Ponly.2)Theinitialsettingis9000h(30cm)forEVI-D90N/P.

Notes

ThenumberoftimesdatacanbewrittentotheEEPROM(byexecutingPositionPreset)islimited. IfyouwantthecamerastatusandPan/Tiltpositionsineffectbeforethecameraisturnedofftoberetainedwhenthepower

isturnedOFF,thenturnedONagain,havethecameramemorizethosepositionsinPOSITION1. Ittakesapproximately2secondslongertomemorizeorerasesettingsinPOSITION1thanitdoestomemorizeorerase

settingsinanyotherchannel. CameraIDdatawillbesavedregardlessofthepositionpreset. IfIMAGEFLIPorD70modehasbeenswitched,allofthePositionPresetsareresettotheirinitialvalues.

16

Basic Functions

Mod

e Co

ndit

ion

Basi

c se

ttin

gs

Mod

ePo

wer

On

Pow

er O

ff1)

IFC2)

Init

ializ

ing3)

Dur

ing

disp

layi

ng th

e m

enu

Mem

ory

Com

man

dCo

mm

and

Add

ress

Set

Yes

Yes

Yes

Yes

Yes

IF_C

lear

Yes

Yes

Yes

Yes

Yes

CA

M_P

ower

On

Yes

No

No

Yes

No

CA

M_P

ower

Off

Yes

No

No

Yes

No

IR_R

ecei

veO

n/O

ffN

oN

oN

oYe

s4)6

)N

o

IR_R

ecei

veRe

turn

On/

Off

No

No

No

Yes6)

No

CA

M_V

ersio

nqYe

sYe

sYe

s5)Ye

sYe

s

CA

M_P

ower

Inq

Yes

Yes

Yes

Yes

Yes

Bloc

kInq

uiry

No

No

No

Yes6)

No

Inqu

iryC

omm

and

(and

sim

ilarc

omm

ands

)N

oN

oN

oYe

s6)N

o

1)D

Cp

ower

isb

eing

supp

lied,

but

the

cam

era

hasb

een

turn

edo

ffby

aV

ISC

Aco

mm

and.

2)

The

per

iod

from

the

time

IFC

lear

isse

nt,u

ntil

the

Repl

yPa

cket

isre

turn

ed.

3)T

hep

erio

dfr

omth

etim

eD

Cp

ower

istu

rned

on

orth

eca

mer

ais

turn

edo

nvi

aa

VIS

CA

com

man

d,a

ndth

eca

mer

asu

bseq

uent

lyfi

nish

esth

epa

n/til

tres

eto

pera

tion

an

dst

opsa

tthe

Hom

epo

sitio

n,u

ntil

the

vide

osig

nali

sout

put.

Ort

hep

erio

dfr

omth

etim

eth

eC

AM

Pow

erO

Nco

mm

and

isse

nt,u

ntil

Com

plet

ion

isre

turn

ed.

4)T

hec

amer

ado

esn

otre

ceiv

eth

eop

erat

ion

sent

from

the

Rem

ote

Com

man

der.

5)C

omm

ands

can

be

exec

uted

afte

rthe

pan

/tilt

mov

emen

thas

bee

nst

arte

d.B

efor

eth

at,c

amer

am

ovem

entm

ayb

ein

cons

isten

t.6)

Whe

nth

em

enu

disp

lay

isup

datin

g,o

pera

tion

isno

tpos

sible

.

1�

Basic Functions

Zoom

/Foc

us

Mod

ePo

wer

Off

1)

Pow

er O

n

Com

man

dIF

C2)In

itia

lizin

g3)Zo

om D

irec

tFo

cus

Dir

ect

AF

ON

Dur

ing

disp

layi

ng

the

men

uM

emor

y Re

call

CA

M_Z

oom

Tel

e/W

ide/

Stop

[VIS

CA

]N

oN

oN

oN

oYe

sYe

sYe

s4)N

o

CA

M_Z

oom

Tel

e/W

ide/

Stop

[RC

]N

oN

oN

oN

oYe

sYe

sYe

s4)N

o

CA

M_Z

oom

Dire

ctN

oN

oN

oYe

sYe

sYe

sYe

s4)N

o

D-Z

oom

Lim

itN

oN

oN

oN

oYe

sYe

sYe

s4)N

o

CA

M_F

ocus

Far

/Nea

r/St

op[V

ISC

A]

No

No

No

Yes

No

No

Yes4)

No

CA

M_F

ocus

Far

/Nea

r/St

op[R

C]

No

No

No

Yes

No

No

Yes4)

No

CA

M_F

ocus

Dire

ctN

oN

oN

oYe

sYe

sN

oYe

s4)N

o

CA

M_F

ocus

Mod

e(A

uto/

Man

ual)

No

No

No

Yes

No

Yes

Yes4)

No

CA

M_F

ocus

One

Pus

hTr

igge

rN

oN

oN

oYe

sN

oN

oYe

s4)N

o

CA

M_F

ocus

Infin

ityN

oN

oN

oYe

sN

oYe

sYe

s4)N

o

CA

M_F

ocus

Nea

rLim

itN

oN

oN

oYe

sN

oYe

sYe

s4)N

o

AF

Sens

itivi

tyN

orm

al/L

owN

oN

oN

oYe

sYe

sYe

sYe

s4)N

o

AF

Mod

eN

orm

/Int

erva

l/Zoo

mN

oN

oN

oYe

sYe

sYe

sYe

s4)N

o

AF

Act

ivat

ion

Tim

e/In

terv

alS

ettin

gN

oN

oN

oYe

sYe

sYe

sYe

s4)N

o

1)D

Cp

ower

isb

eing

supp

lied,

but

the

cam

era

hasb

een

turn

edo

ffby

aV

ISC

Aco

mm

and.

2)

The

per

iod

from

the

time

IFC

lear

isse

nt,u

ntil

the

Repl

yPa

cket

isre

turn

ed.

3)T

hep

erio

dfr

omth

etim

eD

Cp

ower

istu

rned

on

orth

eca

mer

ais

turn

edo

nvi

aa

VIS

CA

com

man

d,a

ndth

eca

mer

asu

bseq

uent

lyfi

nish

esth

epa

n/til

tres

eto

pera

tion

and

stop

satt

heH

ome

posit

ion,

unt

ilth

evi

deo

signa

lis

outp

ut.O

rthe

per

iod

from

the

time

the

CA

MP

ower

ON

com

man

dis

sent

,unt

ilC

ompl

etio

nis

retu

rned

.4)

Whe

nth

em

enu

disp

lay

isup

datin

g,o

pera

tion

isno

tpos

sible

.

Whi

te B

alan

ceM

ode

Pow

er O

ff1)

Pow

er O

n

IFC2)

Init

ializ

ing3)

Whi

te b

alan

ce m

ode

Dur

ing

disp

layi

ng

the

men

uM

emor

y Re

call

Com

man

dA

uto

Indo

orO

utdo

orO

ne P

ush

Man

ual

CA

M_W

BAu

to/I

ndoo

r/O

utdo

or/

One

Phsh

WB/

Man

ual

No

No

No

Yes

Yes

Yes

Yes

Yes

Yes4)

No

CA

M_W

BO

neP

ush

Trig

ger

No

No

No

No

No

No

Yes5)

No

Yes4)

No

CA

M_W

BR(

B)G

ain

Rese

t/Up/

Dow

n/D

irect

No

No

No

No

No

No

No

Yes

Yes4)

No

1)D

Cp

ower

isb

eing

supp

lied,

but

the

cam

era

hasb

een

turn

edo

ffby

aV

ISC

Aco

mm

and.

2)

The

per

iod

from

the

time

IFC

lear

isse

nt,u

ntil

the

Repl

yPa

cket

isre

turn

ed.

3)T

hep

erio

dfr

omth

etim

eD

Cp

ower

istu

rned

on

orth

eca

mer

ais

turn

edo

nvi

aa

VIS

CA

com

man

d,a

ndth

eca

mer

asu

bseq

uent

lyfi

nish

esth

epa

n/til

tres

eto

pera

tion

and

stop

satt

heH

ome

posit

ion,

unt

ilth

evi

deo

signa

lis

outp

ut.O

rthe

per

iod

from

the

time

the

CA

MP

ower

ON

com

man

dis

sent

,unt

ilC

ompl

etio

nis

retu

rned

.4)

Whe

nth

em

enu

disp

lay

isup

datin

g,o

pera

tion

isno

tpos

sible

.5)

Com

man

dsa

reig

nore

ddu

ring

aO

neP

ush

AWB

oper

atio

n.

18

Basic Functions

Expo

sure

Mod

e

Pow

er O

ff1)

Pow

er O

ff

IFC2)

Init

ializ

ing3)

Expo

sure

mod

eW

ide-

D

ON

8)

Dur

ing

disp

layi

ng

the

men

u

Mem

ory

Reca

llCo

mm

and

Full

Aut

oBr

ight

Shut

ter P

riIr

is P

riM

anua

l

CA

M_A

EFu

llAu

to/M

anua

l/Shu

tterP

ri/

Iris

Pri

No

No

No

Yes

Yes4)

Yes

Yes

Yes

Yes

Yes5)

No

CA

M_A

EBr

ight

No

No

No

Yes

Yes

Yes

No

No

Yes

Yes5)

No

CA

M_S

low

Shu

tterL

imit

ON

/OFF

No

No

No

Yes

Yes

Yes

Yes

Yes

No7)

Yes5)

No

CA

M_S

hutte

rRes

et/U

p/D

own/

Dire

ctN

oN

oN

oN

oN

oYe

sN

oYe

sYe

sYe

s5)N

o

CA

M_I

risR

eset

/Up/

Dow

n/D

irect

No

No

No

No

No

No

Yes

Yes

Yes

Yes5)

No

CA

M_G

ain

Rese

t/Up/

Dow

n/D

irect

No

No

No

No

No

No

No

Yes

Yes

Yes5)

No

CA

M_B

right

Up/

Dow

n/D

irect

No

No

No

No

Yes

No

No

No

Yes

Yes5)

No

CA

M_E

xCom

pO

n/O

ffN

oN

oN

oYe

sYe

sYe

sYe

sYe

sN

o7)Ye

s5)N

o

CA

M_E

xCom

pRe

set/U

p/D

own/

Dire

ct6)

No

No

No

Yes

Yes

Yes

Yes

Yes

No7)

Yes5)

No

CA

M_B

ackl

ight

On/

Off

No

No

No

Yes

No

No

No

No

No7)

Yes5)

No

CA

M_W

DO

n/O

ff7)N

oN

oN

oYe

sYe

sYe

sYe

sYe

sYe

sYe

s5)N

o

1)D

Cp

ower

isb

eing

supp

lied,

but

the

cam

era

hasb

een

turn

edo

ffby

aV

ISC

Aco

mm

and.

2)

The

per

iod

from

the

time

IFC

lear

isse

nt,u

ntil

the

Repl

yPa

cket

isre

turn

ed.

3)T

hep

erio

dfr

omth

etim

eD

Cp

ower

istu

rned

on

orth

eca

mer

ais

turn

edo

nvi

aa

VIS

CA

com

man

d,a

ndth

eca

mer

asu

bseq

uent

lyfi

nish

esth

epa

n/til

tres

eto

pera

tion

and

stop

satt

heH

ome

posit

ion,

unt

ilth

evi

deo

signa

lis

outp

ut.O

rthe

per

iod

from

the

time

the

CA

MP

ower

ON

com

man

dis

sent

,unt

ilC

ompl

etio

nis

retu

rned

.4)

Yes

:Onl

yw

hen

the

cam

era

chan

gest

oBR

IGH

Tm

ode

from

Ful

lAut

oor

SH

UTT

ERP

rim

ode.

5)W

hen

the

men

udi

spla

yis

upda

ting,

ope

ratio

nis

notp

ossib

le.

6)N

o:T

hisi

snot

allo

wed

whe

nEX

-CO

MP

isse

tto

OFF

.7)

The

setti

ngsa

reav

aila

ble;

how

ever

,com

man

dac

tions

will

be

exec

uted

onl

yaf

terW

ide-

Dis

sett

oO

FF.

8)T

hisc

omm

and

isav

aila

ble

onE

VI-

D90

N/P

onl

y.

19

Basic Functions

Effe

ct

Mod

ePo

wer

Off

1)

Pow

er O

n

Com

man

dIF

C2)In

itia

lizin

g3)D

urin

g di

spla

ying

th

e m

enu

Mem

ory

Reca

ll

CA

M_A

pert

ure

Rese

t/Up/

Dow

n/D

irect

No

No

No

Yes4)

No

Disp

lay

info

.(O

N/O

FF)

No

No

No

Yes4)

No

CA

M_P

ictu

reEf

fect

OFF

/Neg

.Art

/B&

WN

oN

oN

oYe

s4)N

o

CA

M_I

CR

ON

/OFF

No

No

No

Yes4)

No

CA

M_A

utoI

CR

ON

/OFF

/Thr

esho

ldN

oN

oN

oYe

s4)N

o

CA

M_H

RO

N/O

FFN

oN

oN

oYe

s4)N

o

CA

M_N

RN

oN

oN

oYe

s4)N

o

1)D

Cp

ower

isb

eing

supp

lied,

but

the

cam

era

hasb

een

turn

edo

ffby

aV

ISC

Aco

mm

and.

2)

The

per

iod

from

the

time

IFC

lear

isse

nt,u

ntil

the

Repl

yPa

cket

isre

turn

ed.

3)T

hep

erio

dfr

omth

etim

eD

Cp

ower

istu

rned

on

orth

eca

mer

ais

turn

edo

nvi

aa

VIS

CA

com

man

d,a

ndth

eca

mer

asu

bseq

uent

lyfi

nish

esth

epa

n/til

tres

eto

pera

tion

and

stop

satt

heH

ome

posit

ion,

unt

ilth

evi

deo

signa

liso

utpu

t.O

rthe

per

iod

from

the

time

the

CA

MP

ower

ON

com

man

dis

sent

,unt

ilC

ompl

etio

nis

retu

rned

.4)

Whe

nth

em

enu

disp

lay

isup

datin

g,o

pera

tion

isno

tpos

sible

.

20

Basic Functions

Pan/

Tilt

Mod

e

Pow

er

Off

1)

Pow

er O

n

IFC2)

Init

ia-

lizin

g3)

Zoom

(D

irec

t)Fo

cus

(Dir

ect)

Pan/

Tilt

nor

mal

sta

tus

Posi

tion

de

tect

ion

erro

r

Pan/

tilt

m

ovem

ent

acco

rdin

g to

th

e co

mm

and4)

Abs

olut

e Po

siti

on

exec

utio

n

Rela

tive

Posi

tion

ex

ecut

ion

Hom

e ex

ecut

ion

Rese

t exe

cuti

onM

emor

y Re

call

Dur

ing

disp

layi

ng th

e m

enu

Com

man

dTr

ansm

it

devi

ceC

omm

onC

omm

onV

ISC

ARC

VIS

CA

VIS

CA

VIS

CA

RCV

ISC

ARC

VIS

CA

RC

Pan-

tiltD

rive

Up/

Dow

n/Le

ft/

Righ

t/UpL

eft/U

pRig

ht/

Dow

nLef

t/Dow

nRig

ht

VIS

CA

No

No

No

Yes

Yes

Yes

Yes

No

No

No

No

No

No

No

No

No

Yes8)

RCN

oN

oN

oYe

sYe

sYe

sN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oYe

s8)

Pan-

tiltD

rive

Stop

VIS

CA

No

No

No

Yes

Yes

Yes

Yes

No

No

No

No

No

No

No

No

No

Yes

Pan-

tiltD

rive

Abs

olut

ePos

ition

VIS

CA

No

No

No

Yes

Yes

No

No

Yes

No

No

No

No

No

No

No

Yes5)

No

Pan-

tiltD

rive

Rela

tiveP

ositi

onV

ISC

AN

oN

oN

oYe

sYe

sN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oYe

s5)Ye

s

Pan-

tiltD

rive

Hom

eV

ISC

AN

oN

oN

oYe

sYe

sN

oN

oN

oN

oYe

sN

oN

oN

oN

oN

oN

oN

o

RCN

oN

oN

oYe

sYe

sN

oN

oN

oN

oN

oYe

sN

oN

oN

oN

oN

oN

o

Pan-

tiltD

rive

Rese

tV

ISC

AN

oN

oN

oYe

sYe

sN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oYe

s5)Ye

s

RCN

oN

oN

oYe

sYe

sN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oYe

s5)Ye

s

Pan-

tiltL

imitS

etL

imitS

etV

ISC

AN

oN

oN

oYe

sYe

sYe

sYe

sN

oN

oN

oN

oN

oN

oN

oN

oYe

s5)N

o

Pan-

tiltL

imitS

etL

imitC

lear

VIS

CA

No

No

No

Yes

Yes

Yes

Yes

No

No

No

No

No

No

No

No

Yes5)

No

Mem

ory

Set

Com

mon

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

No

Mem

ory

Rese

tC

omm

onN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oN

oN

o

Mem

ory

Reca

llV

ISC

AN

oN

oN

oN

o6)

No

7)N

oN

oN

oN

oN

oN

oN

oN

oYe

sYe

sN

oN

o

RCN

oN

oN

oN

o6)

No

7)N

oN

oN

oN

oN

oN

oN

oN

oYe

sYe

sN

oN

o

CA

M_N

R9)

VIS

CA

No

No

No

Yes

Yes

No

10)

No

10)

No

10)

No

10)

No

10)

No

10)

Yes

Yes

No

No

Yes5)

Yes

1)

DC

pow

eris

bei

ngsu

pplie

d,b

utth

eca

mer

aha

sbee

ntu

rned

off

bya

VIS

CA

com

man

d.

2)

The

perio

dfr

omth

etim

eIF

Cle

aris

sent

,unt

ilth

eRe

ply

Pack

etis

retu

rned

.3)

Th

epe

riod

from

the

time

DC

pow

eris

turn

edo

nor

the

cam

era

istu

rned

on

via

aV

ISC

Aco

mm

and,

and

the

cam

era

subs

eque

ntly

fini

shes

the

pan/

tiltr

eset

ope

ratio

nan

dst

opsa

tthe

Hom

epo

sitio

n,u

ntil

the

vide

osig

nali

sou

tput

.4)

Th

epa

n/til

tope

ratio

nw

orks

by

Pan-

tiltD

rive

Up/

Dow

n/Le

ft/Ri

ght/U

pLef

t/UpR

ight

/Dow

nLef

t/Dow

nRig

htco

mm

ands

.5)

W

hen

the

men

udi

spla

yis

upda

ting,

ope

ratio

nis

notp

ossib

le.

6)

Yes:

whi

leth

eca

mer

aop

erat

esin

Tel

e/W

ide

zoom

mod

e.7)

Ye

s:w

hile

the

cam

era

oper

ates

inF

ar/N

earf

ocus

mod

e.8)

Ye

s:on

lyfo

rmov

emen

tsaw

ayfr

omth

edi

rect

ion

whe

rea

pos

ition

det

ectio

ner

rorh

asb

een

reco

gniz

ed.

9)

Whe

nC

AM

com

man

dso

roth

erin

quir

yco

mm

ands

are

rece

ived

afte

rthe

pan

/tilt

mov

emen

thas

bee

nst

oppe

d,“C

omm

and

note

xecu

tabl

e”m

ayb

ere

turn

edfo

ram

axim

umo

f120

mse

cdue

toin

tern

alp

roce

ssin

g.In

this

case

,pl

ease

tran

smit

the

com

man

dag

ain.

10)

Yes:

whe

npa

n/til

tmov

esat

hig

hsp

eed.

21

Command List

VISCA1) RS-232C CommandsUseofRS-232Ccontrolsoftwarewhichhasbeendevelopedbaseduponthiscommandlistmaycausemalfunctionordamagetohardwareandsoftware.SonyCorporationisnotliableforanysuchdamage.

Overview of VISCA

InVISCA,thedeviceproducingthecommands,forexample,acomputer,iscalledthecontroller,whilethedevicereceivingthecommands,suchasanEVI-D80N/D80P/D90N/D90P,iscalledtheperipheraldevice.TheEVI-D80N/D80P/D90N/D90PservesasaperipheraldeviceinVISCA.InVISCA,uptosevenperipheraldevicesliketheEVI-D80N/D80P/D90N/D90PcanbeconnectedtoonecontrollerusingcommunicationconformingtotheRS-232Cstandard.TheparametersofRS-232Careasfollows. Communicationspeed:9,600bps/38,400bps Databits:8 Startbit:1 Stopbit:1 NonparityFlowcontrolusingXON/XOFFandRTS/CTS,etc.,isnotsupported.

Peripheraldevicesareconnectedinadaisychain.AsshowninFig.1,theactualinternalconnectionisaone-directionring,sothatmessagesreturntothecontrollerviatheperipheraldevices.Thedevicesonthenetworkareassignedaddresses.Theaddressofthecontrollerisfixedat0.Theaddressesoftheperipheraldevicesare1,2,3...inorder,startingfromtheonenearestthecontroller.Theaddressoftheperipheraldeviceissetbysendingaddresscommandsduringtheinitializationofthenetwork.

TheVISCAdeviceseachhaveaVISCAINandVISCAOUTconnector.SettheDSRinput(theDTRoutputofthecontroller)ofVISCAINtoHwhencontrollingVISCAequipmentfromthecontroller.

Fig. 1 VISCA network configuration

.......................................................................................................................................................................................................................................................1)VISCAisaprotocolwhichcontrolsconsumercamcordersdevelopedbySony.“VISCA”isatrademarkofSonyCorporation.

VISCA Equipment

IN

OUT

IN

OUT

IN

OUT

VISCA Controller

22

Command List

Timing Chart

As VISCA Command processing can only be carriedout one time in a Vertical cycle, it takes the maximum1V cycle time for an ACK/Completion to be returned.If the Command ACK/Completion communicationtime can be cut shorter than the 1V cycle time, thenevery 1V cycle can receive a Command.

VISCA Communication Specifications

VISCA packet structure

The basic unit of VISCA communication is called a packet (Fig. 2). The first byte of the packet is called the header and comprises the sender’s and receiver’s addresses. For example, the header of the packet sent to the EVI-D80N/D80P/D90N/D90P assigned address 1 from the controller (address 0) is hexadecimal 81H.

The packet sent to the EVI-D80N/D80P/D90N/D90P assigned address 2 is 82H. In the command list, as the header is 8X, input the address of the EVI-D80N/D80P/D90N/D90P at X. The header of the reply packet from the EVI-D80N/D80P/D90N/D90P assigned address 1 is 90H. The packet from the EVI-D80N/D80P/D90N/D90P assigned address 2 is A0H.Some of the commands for setting EVI-D80N/D80P/D90N/D90P units can be sent to all devices at one time (broadcast). In the case of broadcast, the header should be hexadecimal 88H.When the terminator is FFH, it signifies the end of the packet.

Bit 7(MSB)

Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0(LSB)

1 0

FF

Bit 7(MSB)

Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0(LSB)

1 1 1 1 1 1 1 1

Packet (3 to 16 bytes)

Message (1 to 14 bytes)Header Terminator

Byte 1 Byte 2 Byte 3

Sender’s address Receiver’s address

Fig. 2 Packet structure

Note

Fig. 2 shows the packet structure, while Fig. 3 shows the actual waveform. Data flow will take place with the LSB first.

Bit 0 Bit 1 Bit 2 Bit 3 Bit 4 Bit 5

(LSB) (MSB)

Bit 6 Bit 7Start bit

Stop bit.

1 byte

Fig. 3 Actual waveform for 1 byte.

Query Commands

General Commands

16 Byte

Command

ACK Completion

Within 16.7msec (20msec PAL)

Completion

Command

Within 16.7msec (20msec PAL)

23

Command List

Command and inquiry

Command Sendsoperationalcommandstothe

EVI-D80N/D80P/D90N/D90P.

Inquiry Usedforinquiringaboutthecurrentstateofthe

EVI-D80N/D80P/D90N/D90P.

Command Packet NoteInquiry 8X QQ RR ... FF QQ1) = Command/Inquiry, RR2) = category code1) QQ = 01 (Command), 09 (Inquiry)2) RR = 00 (Interface), 04 (camera 1), 06 (Pan/Tilter)

X=1to7:EVI-D80N/D80P/D90N/D90Paddress

Responses for commands and inquiries

ACK message ReturnedbytheEVI-D80N/D80P/D90N/D90P

whenitreceivesacommand.NoACKmessageisreturnedforinquiries.

Completion message ReturnedbytheEVI-D80N/D80P/D90N/D90P

whenexecutionofcommandsorinquiriesiscompleted.Inthecaseofinquirycommands,itwillcontainreplydatafortheinquiryafterthe3rdbyteofthepacket.IftheACKmessageisomitted,thesocketnumberwillcontaina0.

Reply Packet NoteAck X0 4Y FF Y = socket numberCompletion (commands) X0 5Y FF Y = socket numberCompletion (Inquiries) X0 5Y ... FF Y = socket numberX = 9 to F: EVI-D80N/D80P/D90N/D90P address + 8

Error message Whenacommandorinquirycommandcouldnot

beexecutedorfailed,anerrormessageisreturnedinsteadofthecompletionmessage.

Error Packet DescriptionX0 6Y 02 FF Syntax ErrorX0 6Y 03 FF Command buffer fullX0 6Y 04 FF Command canceledX0 6Y 05 FF No socket (to be canceled)X0 6Y 41 FF Command not executableX = 9 to F: EVI-D80N/D80P/D90N/D90P address + 8, Y = socket number

Socket number

WhencommandmessagesaresenttotheEVI-D80N/D80P/D90N/D90P,itisnormaltosendthenextcommandmessageafterwaitingforthecompletionmessageorerrormessagetoreturn.Howevertodealwithadvanceduses,theEVI-D80N/D80P/D90N/D90Phastwobuffers(memories)forcommands,sothatuptotwocommandsincludingthecommandscurrentlybeingexecutedcanbereceived.WhentheEVI-D80N/D80P/D90N/D90Preceivescommands,itnotifiesthesenderwhichcommandbufferwasusedusingthesocketnumberoftheACKmessage.Asthecompletionmessageorerrormessagealsohasasocketnumber,itindicateswhichcommandhasended.Evenwhentwocommandbuffersarebeingusedatanyonetime,anEVI-D80N/D80P/D90N/D90Pmanagementcommandandsomeinquirymessagescanbeexecuted.TheACKmessageisnotreturnedforthesecommandsandinquiries,andonlythecompletionmessageofsocketnumber0isreturned.Thefollowingcommandusetwosocketsduringexecutionofeachcommandthatissent.TheEVI-D80N/D80P/D90N/D90Pcannotreceiveotherrequestsduringexecutionofthesecommands.Inaddition,thesecommandscannotbeexecutedduringoperationofothercommands. SYS_Menu

Command execution cancel

Tocancelacommandwhichhasalreadybeensent,sendtheCancelcommandasthenextcommand.Tocanceloneofanytwocommandswhichhavebeensent,usethecancelmessage.

Cancel Packet NoteCancel 8X 2Y FF Y = socket numberX = 1 to �: EVI-D80N/D80P/D90N/D90P address, Y = socket number

TheCommandcancelederrormessagewillbereturnedforthiscommand,butthisisnotafault.Itindicatesthatthecommandhasbeencanceled.

24

Command List

VISCA Device Setting Command

BeforestartingcontroloftheEVI-D80N/D80P/D90N/D90P,besuretosendtheAddresscommandandtheIF_Clearcommandusingthebroadcastfunction.

For VISCA network administration

Address Set Setsanaddressofaperipheraldevice.Usewhen

initializingthenetwork,andreceivingthefollowingnetworkchangemessage.

Command ReplyAddress Set 88 30 01 FF 88 30 0w FFw = 2 to �: EVI-D80N/D80P/D90N/D90P address + 8

Network Change Sentfromtheperipheraldevicetothecontroller

whenadeviceisremovedfromoraddedtothenetwork.Theaddressmustbere-setwhenthismessageisreceived.

Received Packet Network Change X0 38 FFX = 9 to F: EVI-D80N/D80P/D90N/D90P address + 8

VISCA interface command

IF_Clear Clearsthecommandbuffersinthe

EVI-D80N/D80P/D90N/D90Pandcancelsthecommandcurrentlybeingexecuted.

Command Packet Reply Packet NoteIF_Clear 8X 01 00 01FF Y0 50 FFIF_Clear (broadcast) 88 01 00 01 FF 88 01 00 01 FFX = 1 to �: EVI-D80N/D80P/D90N/D90P address Y = 9 to F: EVI-D80N/D80P/D90N/D90P address +8

VISCA interface and inquiry

CAM_VersionInq ReturnsinformationontheVISCAinterface.

Inquiry Inquiry Packet Reply Packet DescriptionCAM_VersionInq 8X 09 00 02 FF Y0 50 GG GG HH HH JJ JJ KK FF GGGG = Vender ID (0001: Sony) HHHH = Model ID 050C: EVI-D80N/P 050D: EVI-D90N/P JJJJ = ROM revision KK = Maximum socket # (02)

X = 1 to �: EVI-D80N/D80P/D90N/D90P address (For inquiry packet)X = 9 to F: EVI-D80N/D80P/D90N/D90P address +8 (For reply packet)

25

Command List

Pin assignment

VISCA IN connector (mini-DIN 8-pin, female)

EVI-D80N/D80P/ WindowsD-sub9pinD90N/D90P

EVI-D80N/D80P/ EVICameraorMiniD90N/D90P DIN8pinserial

EVI-D80N/D80P/ WindowsD-sub25pinD90N/D90PVISCA IN

No Pins

1 DTRIN*

2 DSRIN*

3 TXDIN

4 GND

5 RXDIN

6 GND

7 IROUT**

8 Notused

* The“IN”inthefunctionnamesforpins1and2(“DTRIN”and“DSRIN”)areinreferencetobeingwithintheVISCAINconnector.Fordetailsonsignaldirection,seethediagramstotheright.

**YoucanchangeON/OFFofIROUTofpins7usingtheBOTTOMswitch(seepage6).

26

Command List

Using the VISCA RS-422 connector pin assignments

The VISCA RS-422 connector pin assignments

1 2 3 4 5

VISCA RS-422

6 7 8 9

Pin No. Function

1 TXDIN+

2 TXDIN–

3 RXDIN+

4 RXDIN–

5 GND

6 TXDOUT+

7 TXDOUT–

8 RXDOUT+

9 RXDOUT–

Using the VISCA RS-422 connector plug

1 Insert a wire (AW G Nos. 28 to 18) into the desired wire opening on the supplied VISCA RS-422 connector plug, and tighten the screw for that wire using a flat-head screwdriver.

Flat-head screwdriver

Wire

2 Insert the VISCA RS-422 connector plug into the VISCA RS-422 connector on the rear of the camera.

1 2 3 4 5 6 7 8 9

Note

Inordertostabilizethevoltagelevelofthesignal,connectbothendstoGND.

DonotmakeaVISCARS-232CconnectionwhenthereisalreadyanexistingVISCARS-422connection.

2�

Command List

VISCA Command/ACK Protocol

Command Command Message Reply Message Comments

GeneralCommand 8101043802FF(Example)

9041FF(ACK)+9051FF(Completion)9042FF9052FF

ReturnsACKwhenacommandhasbeenaccepted,andCompletionwhenacommandhasbeenexecuted.

81010438FF(Example)

906002FF(SyntaxError) Acceptedacommandwhichisnotsupportedoracommandlackingparameters.

8101043802FF(Example)

906003FF(CommandBufferFull)

Therearetwocommandscurrentlybeingexecuted,andthecommandcouldnotbeaccepted.

8101040802FF(Example)

906141FF(CommandNotExecutable)906241FF

Couldnotexecutethecommandinthecurrentmode.

InquiryCommand 81090438FF(Example)

905002FF(Completion) ACKisnotreturnedfortheinquirycommand.

81090538FF(Example)

906002FF(SyntaxError) Acceptedanincompatiblecommand.

AddressSet 883001FF 88300wFF w:Returnedthedeviceaddressto+1.(2to8)

IF_Clear(Broadcast) 88010001FF 88010001FF Returnedthesamecommand.

IF_Clear(Forx) 8x010001FF z050FF(Completion) ACKisnotreturnedforthiscommand.

CommandCancel 8x2yFF(y:SocketNo.)

z06y04FF(CommandCanceled)

Returnedwhenthecommandofthesocketspecifiediscanceled.Completionforthecommandcanceledisnotreturned.

z06y05FF(NoSocket) Returnedwhenthecommandofthespecifiedsockethasalreadybeencompletedorwhenthesocketnumberspecifiediswrong.

z=Deviceaddress+8

28

Command List

VISCA Camera-Issued Messages

ACK/Completion Messages

Command Messages Comments

ACK z04yFF(y:SocketNo.)

Returnedwhenthecommandisaccepted.

Completion z05yFF(y:SocketNo.)

Returnedwhenthecommandhasbeenexecuted.

z=Deviceaddress+8

Error Messages

Command Messages Comments

SyntaxError z06002FF Returnedwhenthecommandformatisdifferentorwhenacommandwithillegalcommandparametersisaccepted.

CommandBufferFull z06003FF Indicatesthattwosocketsarealreadybeingused(executingtwocommands)andthecommandcouldnotbeacceptedwhenreceived.

CommandCanceled z06y04FF(y:SocketNo.)

Returnedwhenacommandwhichisbeingexecutedinasocketspecifiedbythecancelcommandiscanceled.Thecompletionmessageforthecommandisnotreturned.

NoSocket z06y05FF(y:SocketNo.)

Returnedwhennocommandisexecutedinasocketspecifiedbythecancelcommand,orwhenaninvalidsocketnumberisspecified.

CommandNotExecutable z06y41FF(y:ExecutioncommandSocketNo.Inquirycommand:0)

Returnedwhenacommandcannotbeexecutedduetocurrentconditions.Forexample,whencommandscontrollingthefocusmanuallyarereceivedduringautofocus.

z=Deviceaddress+8

Network Change Message

Command Message Comments

NetworkChange z038FF Issuedwhenpowerisbeingroutedtothecamera,orwhentheVISCAdeviceisconnectedtoordisconnectedfromtheVISCAOUTconnector.

z=Deviceaddress+8

29

Command List

EVI-D80N/D80P/D90N/D90P Commands

EVI-D80N/D80P/D90N/D90P Command List (1/3)

Command Set Command Command Packet Comments

AddressSet Broadcast 883001FF Addresssetting

IF_Clear Broadcast 88010001FF I/FClear

CommandCancel 8x2pFF p:SocketNo.(=1or2)

CAM_Power On 8x01040002FF PowerON/OFF

Off 8x01040003FF

CAM_Zoom Stop 8x01040700FF

Tele(Standard) 8x01040702FF

Wide(Standard) 8x01040703FF

Tele(Variable) 8x0104072pFF p=0(Low)to7(High)

Wide(Variable) 8x0104073pFF

Direct 8x0104470p0q0r0sFF pqrs:ZoomPosition

CAM_DZoom On 8x01040602FF DigitalzoomON/OFF

Off 8x01040603FF

CAM_Focus Stop 8x01040800FF

Far(Standard) 8x01040802FF

Near(Standard) 8x01040803FF

Far(Variable) 8x0104082pFF p=0(Low)to7(High)

Near(Variable) 8x0104083pFF

Direct 8x0104480p0q0r0sFF pqrs:FocusPosition

AutoFocus 8x01043802FF AFON/OFF

ManualFocus 8x01043803FF

Auto/Manual 8x01043810FF

OnePushTrigger 8x01041801FF OnePushAFTrigger

Infinity 8x01041802FF Forcedinfinity

NearLimit 8x0104280p0q0r0sFF pqrs:FocusNearLimitPosition

AFSensitivity Normal 8x01045802FF AFSensitivityHigh/Low

Low 8x01045803FF

CAM_AFMode NormalAF 8x01045700FF AFMovementMode

IntervalAF 8x01045701FF

ZoomTriggerAF 8x01045702FF

Active/IntervalTime 8x0104270p0q0r0sFF pq:MovementTime,rs:Interval

CAM_IRCorrection Standard 8x01041100FF FOCUSIRcompensationdataswitching

IRLight 8x01041101FF

CAM_ZoomFocus Direct 8x0104470p0q0r0s0t0u0v0wFF

pqrs:ZoomPositiontuvw:FocusPosition

CAM_WB Auto 8x01043500FF NormalAuto

Indoor 8x01043501FF Indoormode

Outdoor 8x01043502FF Outdoormode

OnePushWB 8x01043503FF OnePushWBmode

Manual 8x01043505FF ManualControlmode

OnePushTrigger1)6) 8x01041005FF OnePushWBTrigger

CAM_RGain Reset 8x01040300FF ManualControlofRGain

Up 8x01040302FF

Down 8x01040303FF

Direct 8x01044300000p0qFF pq:RGain

CAM_BGain Reset 8x01040400FF ManualControlofBGain

Up 8x01040402FF

Down 8x01040403FF

Direct 8x01044400000p0qFF pq:BGain

30

Command List

EVI-D80N/D80P/D90N/D90P Command List (2/3)

Command Set Command Command Packet Comments

CAM_AE FullAuto 8x01043900FF AutomaticExposuremode

Manual 8x01043903FF ManualControlmode

ShutterPriority 8x0104390AFF ShutterPriorityAutomaticExposuremode

IrisPriority 8x0104390BFF IrisPriorityAutomaticExposuremode

Bright2) 8x0104390DFF BrightMode(Manualcontrol)

CAM_SlowShutter Auto 8x01045A02FF AutoSlowShutterON/OFF

Manual 8x01045A03FF

CAM_Shutter Reset 8x01040A00FF ShutterSetting

Up 8x01040A02FF

Down 8x01040A03FF

Direct 8x01044A00000p0qFF pq:ShutterPosition

CAM_Iris Reset 8x01040B00FF IrisSetting

Up 8x01040B02FF

Down 8x01040B03FF

Direct 8x01044B00000p0qFF pq:IrisPosition

CAM_Gain Reset 8x01040C00FF GainSetting

Up 8x01040C02FF

Down 8x01040C03FF

Direct 8x01044C00000p0qFF pq:GainPosition

AEGainLimit 8x01042C0pFF p:GainPosition(4-F)

CAM_Bright Up 8x01040D02FF BrightSetting

Down 8x01040D03FF

Direct 8x01044D00000p0qFF pq:BrightPosition

CAM_ExpComp On 8x01043E02FF ExposureCompensationON/OFF

Off 8x01043E03FF

Reset 8x01040E00FF ExposureCompensationAmountSetting

Up 8x01040E02FF

Down 8x01040E03FF

Direct 8x01044E00000p0qFF pq:ExpCompPosition

CAM_BackLight On 8x01043302FF BackLightCompensationON/OFF

Off 8x01043303FF

CAM_WD5) On 8x01043D02FF Wide-DON/OFF

Off 8x01043D03FF

AutoOnOff 8x01043D00FF WidedynamicON/OFFautoswitching

On(RatioFix) 8x01043D01FF WidedynamicON(Fixedexposureratiomode)

On(Histogram) 8x01043D04FF WidedynamicON(Histogrammode)

Refresh 8x0104100DFF WidedynamicRefresh

SetParameter 8x01042D0p0q0r0s0t0u0000FF

p:Screendisplay(0:Combinedimage,2:Long-time,3:Short-time)q:Detectionsensitivity(0:L1:M2:H)r:Blocked-upshadowcorrectionlevel(0:L1:M2:H3:S)s:Blown-outhighlightcorrectionlevel(0:L1:M2:H)tu:Exposureratioofshortexposure(x1tox64)

CAM_Aperture Reset 8x01040200FF ApertureControl

Up 8x01040202FF

Down 8x01040203FF

Direct 8x01044200000p0qFF pq:ApertureGain

CAM_HR On 8x01045202FF High-ResolutionModeON/OFF

Off 8x01045203FF

CAM_NR 8x0104530pFF p:NRSetting(0:OFF,level1to5)

31

Command List

EVI-D80N/D80P/D90N/D90P Command List (3/3)

Command Set Command Command Packet Comments

CAM_PictureEffect Off 8x 01 04 63 00 FF Picture Effect Setting

Neg.Art 8x 01 04 63 02 FF

B&W 8x 01 04 63 04 FF

CAM_ICR 5) On 8x 01 04 01 02 FF Infrared Mode ON/OFF

Off 8x 01 04 01 03 FF

CAM_AutoICR 5) On 8x 01 04 51 02 FF Auto dark-field mode On/Off

Off 8x 01 04 51 03 FF

Threshold 8x 01 04 21 00 00 0p 0q FF pq: ICR ON → OFF Threshold Level

CAM_CCDOut 5) 7) Interlace 8x 01 7E 01 72 00 FF CCD Readout Mode InterlaceCCD Readout Mode ProgressiveProgressive 8x 01 7E 01 72 01 FF

CAM_Stabilizer 5) On 8x 01 04 34 02 FF Hand shake correction ON/OFF

Off 8x 01 04 34 03 FF

Hold 8x 01 04 34 00 FF Hand shake correction Hold

CAM_Memory Reset 3) 6) 8x 01 04 3F 00 0p FF p: Memory Number (=0 to 5)Corresponds to 1 to 6 on the Remote Commander.Set 3) 6) 8x 01 04 3F 01 0p FF

Recall 3) 4) 8x 01 04 3F 02 0p FF

CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF pqrs: Camera ID (=0000 to FFFF)

SYS_Menu Off 8x 01 06 06 03 FF Turns off the menu screen.

IR_Receive On 8x 01 06 08 02 FF IR(remote commander) receive ON/OFF

Off 8x 01 06 08 03 FF

On/Off 8x 01 06 08 10 FF

IR_ReceiveReturn On 8x 01 7D 01 03 00 00 FF IR (remote commander) receive message via the VISCA communication ON/OFF

Off 8x 01 7D 01 13 00 00 FF For contents of messages, see page 34.

Information Display On 8x 01 7E 01 18 02 FF ON/OFF of the Operation status display of One Push

Off 8x 01 7E 01 18 03 FF Trigger of CAM_Memory and CAM_WB

Pan-tiltDrive Up 3) 8x 01 06 01 VV WW 03 01 FF VV: Pan speed 01 to 18WW: Tilt Speed 01 to 17YYYY: Pan Position E1E5 to 1E1B (center 0000)ZZZZ: Tilt Position FC75 to 0FF0 (IMAGE FLIP: OFF)

(center 0000) Tilt Position F010 to 038B (IMAGE FLIP: ON) (center 0000) See page 43

Down 3) 8x 01 06 01 VV WW 03 02 FF

Left 3) 8x 01 06 01 VV WW 01 03 FF

Right 3) 8x 01 06 01 VV WW 02 03 FF

UpLeft 3) 8x 01 06 01 VV WW 01 01 FF

UpRight 3) 8x 01 06 01 VV WW 02 01 FF

DownLeft 3) 8x 01 06 01 VV WW 01 02 FF

DownRight 3) 8x 01 06 01 VV WW 02 02 FF

Stop 3) 8x 01 06 01 VV WW 03 03 FF

AbsolutePosition 8x 01 06 02 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF

RelativePosition 8x 01 06 03 VV WW 0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF

Home 8x 01 06 04 FF

Reset 8x 01 06 05 FF

Pan-tiltLimitSet LimitSet 8x 01 06 07 00 0W0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF

W: 1 UpRightYYYY: Pan Limit Position 0001 to 1E1BZZZZ: Tilt Limit Position 0001 to 0FF0 (IMAGE FLIP: OFF)

Tilt Limit Position 0001 to 038B (IMAGE FLIP: ON)W: 0 DownLeftYYYY: Pan Limit Position E1E5 to FFFFZZZZ: Tilt Limit Position FC75 to FFFF (IMAGE FLIP: OFF)

Tilt Limit Position F010 to FFFF (IMAGE FLIP: ON)

LimitClear 8x 01 06 07 01 0W07 0F 0F 0F 07 0F 0F 0F FF

1) After an ACK to a One Push White Balance Trigger is sent until the operation is completed, “Not Executable” is sent as a reply when any other commands are received.

2) Bright can be set only in Full Auto mode or Shutter Priority mode.3) When the menu is displayed, this operation is ignored.

32

Command List

4)WhenothercommandsarereceivedafteraCompletionnotificationfortheRecallcommandissent,“Commandnotexecutable”maybereturnedforamaximumof240msecduetointernalprocessing.Inthiscase,pleasetransmitthecommandagain.

5)ThecommandisavailableonEVI-D90N/Ponly.6)IfInformationDisplayissettoON,thenextcommandactionmaybedelayedduetoOperationstatusdisplayinternalprocessingafter

thesecommandsareexecuted.7)Changeswillbereflectedwhenthepoweristurnedonagain.

33

Command List

EVI-D80N/D80P/D90N/D90P Inquiry Command List (1/2)

Inquiry Command Command Packet Inquiry Packet Comments

CAM_PowerInq 8x090400FF y05002FF On

y05003FF Off

CAM_ZoomPosInq 8x090447FF y0500p0q0r0sFF pqrs:ZoomPosition

CAM_DZoomModeInq 8x090406FF y05002FF D-ZoomOn

y05003FF D-ZoomOff

CAM_FocusModeInq 8x090438FF y05002FF AutoFocus

y05003FF ManualFocus

CAM_FocusPosInq 8x090448FF y0500p0q0r0sFF pqrs:FocusPosition

CAM_FocusNearLimitInq 8x090428FF y0500p0q0r0sFF pqrs:FocusNearLimitPosition

CAM_AFSensitivityInq 8x090458FF y05002FF AFSensitivityNormal

y05003FF AFSensitivityLow

CAM_AFModeInq 8x090457FF y05000FF NormalAF

y05001FF IntervalAF

y05002FF ZoomTriggerAF

CAM_AFTimeSettingInq 8x090427FF y0500p0q0r0sFF pq:MovementTime,rs:Interval

CAM_IRCorrectionInq 8x090411FF y05000FF Standard

y05001FF IRLight

CAM_WBModeInq 8x090435FF y05000FF Auto

y05001FF InDoor

y05002FF OutDoor

y05003FF OnePushWB

y05005FF Manual

CAM_RGainInq 8x090443FF y05000000p0qFF pq:RGain

CAM_BGainInq 8x090444FF y05000000p0qFF pq:BGain

CAM_AEModeInq 8x090439FF y05000FF FullAuto

y05003FF Manual

y0500AFF ShutterPriority

y0500BFF IrisPriority

y0500DFF Bright

CAM_SlowShutterModeInq 8x09045AFF y05002FF Auto

y05003FF Manual

CAM_ShutterPosInq 8x09044AFF y05000000p0qFF pq:ShutterPosition

CAM_IrisPosInq 8x09044BFF y05000000p0qFF pq:IrisPosition

CAM_GainPosInq 8x09044CFF y05000000p0qFF pq:GainPosition

CAM_AEGainLimitInq 8x09042CFF y0500pFF p:GainLimit

CAM_BrightPosInq 8x09044DFF y05000000p0qFF pq:BrightPosition

CAM_ExpCompModeInq 8x09043EFF y05002FF On

y05003FF Off

CAM_ExpCompPosInq 8x09044EFF y05000000p0qFF pq:ExpCompPosition

CAM_BackLightModeInq 8x090433FF y05002FF On

y05003FF Off

CAM_WDModeInq1) 8x09043DFF y05002FF On

y05003FF Off

y05000FF AutoOnOff

y05001FF On(RatioFix)

y05004FF On(Histogrammode)

34

Command List

EVI-D80N/D80P/D90N/D90P Inquiry Command List (2/2)

Inquiry Command Command Packet Inquiry Packet Comments

CAM_WDParameterInq 1) 8x 09 04 2D FF y0 50 0p 0q 0r 0s 0t 0u 00 00 FF p: Screen displayq: Detection sensitivityr: Blocked-up shadow correction levels: Blown-out highlight correction leveltu: Exposure ratio of short exposure

CAM_ApertureInq 8x 09 04 42 FF y0 50 00 00 0p 0q FF pq: Aperture Gain

CAM_HRModeInq 8x 09 04 52 FF y0 50 02 FF On

y0 50 03 FF Off

CAM_NRInq 8x 09 04 53 FF y0 50 0p FF p: NR level

CAM_PictureEffectModeInq 8x 09 04 63 FF y0 50 00 FF Off

y0 50 02 FF Neg.Art

y0 50 04 FF B&W

CAM_ICRModeInq 1) 8x 09 04 01 FF y0 50 02 FF On

y0 50 03 FF Off

CAM_AutoICRModeInq 1) 8x 09 04 51 FF y0 50 02 FF On

y0 50 03 FF Off

CAM_AutoICRThresholdInq 1) 8x 09 04 21 FF y0 50 00 00 0p 0q FF pq: ICR ON → OFF Threshold Level

CAM_CCDOutInq 1) 8x 09 7E 01 72 FF y0 50 00 00 FF Interlace

y0 50 00 01 FF Progressive

CAM_StabilizerModeInq 1) 8x 09 04 34 FF y0 50 02 FF On

y0 50 03 FF Off

y0 50 00 FF Hold

CAM_IDInq 8x 09 04 22 FF y0 50 0p 0q 0r 0s FF pqrs: Camera ID

CAM_VersionInq 8x 09 00 02 FF y0 50 00 01 mn pq rs tu vw FF

mnpq: Model Code (D80:050C/D90:050D)rstu: ROM versionvw: Socket Number (=02)

See page 23.

SYS_MenuModeInq 8x 09 06 06 FF y0 50 02 FF On

y0 50 03 FF Off

Information Display 8x 09 7E 01 18 FF y0 50 02 FF On

y0 50 03 FF Off

IR_Receive 8x 09 06 08 FF y0 50 02 FF Ony0 50 03 FF Off

IR_ReceiveReturn y0 07 7D 01 04 00 FF Power ON/OFFy0 07 7D 01 04 07 FF Zoom tele/widey0 07 7D 01 04 38 FF AF On/Offy0 07 7D 01 04 33 FF CAM_Backlighty0 07 7D 01 04 3F FF CAM_Memoryy0 07 7D 01 06 01 FF Pan_tiltDrive

IR_ConditionInq 8x 09 06 34 FF y0 50 00 FF Stable reception from the IR Remote Commandery0 50 01 FF Unstable reception from the IR Remote Commandery0 50 02 FF Impossible to detect the infrared signals from

the Remote Commander because the camera is turned on by the Remote Commander.

Pan-tiltMaxSpeedInq 8x 09 06 11 FF y0 50 ww zz FF ww = Pan Max Speedxx = Tilt Max Speed

Pan-tiltPosInq 2) 8x 09 06 12 FF y0 50 0w 0w 0w 0w0z 0z 0z 0z FF

wwww = Pan Positionzzzz = Tilt Position SpeedSee page 43.

Pan-tiltModeInq 8x 09 06 10 FF y0 50 pq rs FF pqrs: Pan-tilt StatusSee page 43.

1) The command is available on EVI-D90N/P only.2) If a Pan-tiltPosInq command is received after Pan-tiltDrive Reset, the pan/tilt position may be different for 1-2 addresses.

35

Command List

EVI-D80N/D80P/D90N/D90P Block Inquiry Command List

Lens Control system Inquiry Commands ............ Command Packet 8x 09 7E 7E 00 FF

Byte Bit Comments

0

7654

Destination Address

3210

Source Address

1

7 0 Completion Message (50h)

6 1

5 0

4 1

3 0

2 0

1 0

0 0

2

7 0

6 0

5 0

4 0

3210

Zoom Position (HH)

3

7 0

6 0

5 0

4 0

3210

Zoom Position (HL)

4

7 0

6 0

5 0

4 0

3210

Zoom Position (LH)

5

7 0

6 0

5 0

4 0

3210

Zoom Position (LL)

Byte Bit Comments

6

7 0

6 0

5 0

4 0

3210

Focus Near Limit (H)

7

7 0

6 0

5 0

4 0

3210

Focus Near Limit (L)

8

7 0

6 0

5 0

4 0

3210

Focus Position (HH)

9

7 0

6 0

5 0

4 0

3210

Focus Position (HL)

10

7 0

6 0

5 0

4 0

3210

Focus Position (LH)

11

7 0

6 0

5 0

4 0

3210

Focus Position (LL)

Byte Bit Comments

12

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

13

7 0

6 0

5 0

43

0: Normal 1: Interval2: Zoom Trigger

2AF Sensitivity 0: Low1: Normal

1 Digital Zoom 1:On 0:Off

0 Focus Mode 0:Manual 1:Auto

14

7 0

6 0

5 0

4 0

3Low Contrast Detection 1: Yes0: No

2Camera Memory Recall1: Executing 0: Stopped

1Focus Command 1: Executing0: Stopped

0Zoom Command 1: Executing0: Stopped

15

7 1 Terminator (FFh)

6 1

5 1

4 1

3 1

2 1

1 1

0 1

36

Command List

Lens Control System Inquiry Commands ............ Command Packet 8x 09 7E 7E 01 FF

Byte Bit Comments

0

7654

DestinationAddress

3210

SourceAddress

1

7 0CompletionMessage(50h)

6 1

5 0

4 1

3 0

2 0

1 0

0 0

2

7 0

6 0

5 0

4 0

3210

RGain(H)

3

7 0

6 0

5 0

4 0

3210

RGain(L)

4

7 0

6 0

5 0

4 0

3210

BGain(H)

5

7 0

6 0

5 0

4 0

3210

BGain(L)

Byte Bit Comments

6

7 0

6 0

5 0

4 0

3210

WBMode

7

7 0

6 0

5 0

4 0

3210

ApertureGain

8

7 0

6 0

5 0

43210

ExposureMode

9

7 0

6 0

5 High-Resolution1:On0:Off

4Wide-D(1:OtherthanOff,0:Off)

3 0

2 BackLight1:On0:Off

1 ExposureComp.1:On0:Off

0 SlowShutter1:Auto0:Manual

10

7 0

6 0

5 0

43210

ShutterPosition

11

7 0

6 0

5 0

43210

IrisPosition

Byte Bit Comments

12

7 0

6 0

5 0

4 0

3210

GainPosition

13

7 0

6 0

5 0

43210

BrightPosition

14

7 0

6 0

5 0

4 0

3210

ExposureComp.Position

15

7 1Terminator(FFh)

6 1

5 1

4 1

3 1

2 1

1 1

0 1

3�

Command List

Byte Bit Comments

0

7654

DestinationAddress

3210

SourceAddress

1

7 0CompletionMessage(50h)

6 1

5 0

4 1

3 0

2 0

1 0

0 0

2

7 0

6 0

5 0

4 0

3 0

2 AutoICR1:On0:Off

1 0

0 Power1:On0:Off

3

7 0

6 Stabilizer(1:On,0:Off)

5 0

4 ICR1:On0:Off

3 0

2 0

1 0

0 0

4

7 0

6 0

5 0

4 Inconsistent

3 Inconsistent

2 Inconsistent

1 0

0 0

5

7 0

6 0

5 0

4 0

3210

PictureEffectMode

Byte Bit Comments

6

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

7

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

8

7 0

6 0

5 0

4 0

3210

CameraID(HH)

9

7 0

6 0

5 0

4 0

3210

CameraID(HL)

10

7 0

6 0

5 0

4 0

3210

CameraID(LH)

11

7 0

6 0

5 0

4 0

3210

CameraID(LL)

Byte Bit Comments

12

7 0

6 0

5 Inconsistent

4Memory1:Provided0:Notprovided

3 Inconsistent

2ICR1:Provided0:Notprovided

1Stabilizer(1:Provided,0:Notprovided)

0 System1:PAL0:NTSC

13

7 0

6 0

5 0

4 0

3210

Inconsistent

14

7 0

6 0

543210

Inconsistent

15

7 1Terminator(FFh)

6 1

5 1

4 1

3 1

2 1

1 1

0 1

Other Inquiry Commands .............................................. Command Packet 8x 09 7E 7E 02 FF

38

Command List

Byte Bit Comments

0

7654

DestinationAddress

3210

SourceAddress

1

7 0CompletionMessage(50h)

6 1

5 0

4 1

3 0

2 0

1 0

0 0

2

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

3

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

4

7 0

6 0

5 0

4 0

3210

AFActivationTime(H)

5

7 0

6 0

5 0

4 0

3210

AFActivationTime(L)

Byte Bit Comments

6

7 0

6 0

5 0

4 0

3210

AFIntervalTime(H)

7

7 0

6 0

5 0

4 0

3210

AFIntervalTime(L)

8

7 0

6 0

5 0

4 0

3 1

2 0

1 0

0 0

9

7 0

6 0

5 0

4 0

3 1

2 0

1 0

0 0

10

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

Byte Bit Comments

11

7 0

6 0

5 0

4 0

3 0

2 1

1 1

0 1

12

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 1

13

7 0

6 0

5 0

4 0

3 0

210

NRLevel

14

7 0

6 0

5 0

4 0

3210

AEGainLimit

15

7 1Terminator(FFh)

6 1

5 1

4 1

3 1

2 1

1 1

0 1

Enlargement Function1 Query Command .................... Command Packet 8x 09 7E 7E 03 FF

39

Command List

Byte Bit Comments

0

7654

DestinationAddress

3210

SourceAddress

1

7 0CompletionMessage(50h)

6 1

5 0

4 1

3 0

2 0

1 0

0 0

2

7 0

6 0

5 0

4 0

3 0

210

WideDmode(0:OFF,1:ON,2:AutoON/OFF,3:ON(RatioFIx),4:ON(Dver))

3

7 0

6 0

5 0

4 0

32

WideDscreendisplay0:Combinedimage1:Long/shortdivision2:Long-time3:Short-time

10

WideDdetectionsensitivity0:L1:M2:H

4

7 0

6 0

5 0

4 0

32

WideDblocked-upshadowcorrectionlevel0:L1:M2:H3:S

10

WideDblown-outhighlightcorrectionlevel0:L1:M2:H

5

7 0

6 0

5 0

4 0

3210

WideDshortexposureExposureratio(H)

Byte Bit Comments

6

7 0

6 0

5 0

4 0

3210

WideDshortexposureExposureratio(L)

7

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

8

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

9

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

10

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

11

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

Byte Bit Comments

12

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

13

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

14

7 0

6 0

5 0

4 0

3 0

2 0

1 0

0 0

15

7 1Terminator(FFh)

6 1

5 1

4 1

3 1

2 1

1 1

0 1

Enlargement Function2 Query Command .................... Command Packet 8x 09 7E 7E 04 FF

40

Command List

VISCA Command Setting Values

Exposure Control (1/2)

NTSC (s) PAL (s)

ShutterSpeed 15 1/10000 1/10000

14 1/6000 1/6000

13 1/4000 1/3500

12 1/3000 1/2500

11 1/2000 1/1750

10 1/1500 1/1250

0F 1/1000 1/1000

0E 1/725 1/600

0D 1/500 1/425

0C 1/350 1/300

0B 1/250 1/215

0A 1/180 1/150

09 1/125 1/120

08 1/100 1/100

07 1/90 1/75

06 1/60 1/50

05 1/30 1/25

04 1/15 1/12

03 1/8 1/6

02 1/4 1/3

01 1/2 1/2

00 1/1 1/1

Iris 11 F1.4(F1.35)

10 F1.6

0F F2

0E F2.4

0D F2.8

0C F3.4

0B F4

0A F4.8

09 F5.6

08 F6.8

07 F8

06 F9.6

05 F11

04 F14

03 F16

02 F19

01 F22

00 CLOSE

*Numberin()appliestoEVI-D90N/Ponly.

Gain 0F +28dB

0E +26dB

0D +24dB

0C +22dB

0B +20dB

0A +18dB

09 +16dB

08 +14dB

07 +12dB

06 +10dB

05 +8dB

04 +6dB

03 +4dB

02 +2dB

01 0dB

00 –3dB

GainLimit 0F +28dB

0E +26dB

0D +24dB

0C +22dB

0B +20dB

0A +18dB

09 +16dB

08 +14dB

07 +12dB

06 +10dB

05 +8dB

04 +6dB

41

Command List

Exposure Control (2/2)

IRIS GAIN

Bright 1F F1.4(F1.35) +28dB

1E F1.4(F1.35) +26dB

1D F1.4(F1.35) +24dB

1C F1.4(F1.35) +22dB

1B F1.4(F1.35) +20dB

1A F1.4(F1.35) +18dB

19 F1.4(F1.35) +16dB

18 F1.4(F1.35) +14dB

17 F1.4(F1.35) +12dB

16 F1.4(F1.35) +10dB

15 F1.4(F1.35) +8dB

14 F1.4(F1.35) +6dB

13 F1.4(F1.35) +4dB

12 F1.4(F1.35) +2dB

11 F1.4(F1.35) 0dB

10 F1.6 0dB

0F F2 0dB

0E F2.4 0dB

0D F2.8 0dB

0C F3.4 0dB

0B F4 0dB

0A F4.8 0dB

09 F5.6 0dB

08 F6.8 0dB

07 F8 0dB

06 F9.6 0dB

05 F11 0dB

04 F14 0dB

03 F16 0dB

02 F19 0dB

01 F22 0dB

00 CLOSE 0dB

ExposureComp. 0E +7 +10.5dB

0D +6 +9dB

0C +5 +7.5dB

0B +4 +6dB

0A +3 +4.5dB

09 +2 +3dB

08 +1 +1.5dB

07 0 0dB

06 –1 –1.5dB

05 –2 –3dB

04 –3 –4.5dB

03 –4 –6dB

02 –5 –7.5dB

01 –6 –9dB

00 –7 –10.5dB

Zoom Ratio and Zoom Position (for reference) (EVI-D80N/P)

Zoom Ratio ×36 Lens

Optical Zoom Positon Data

×1 0000

×2 15CA

×3 1F65

×4 2527

×5 2921

×6 2C22

×7 2E88

×8 3088

×9 3242

×10 33C9

×11 3529

×12 366C

×13 3795

×14 38A8

×15 39A5

×16 3A8E

×17 3B61

×18 3C1E

×19 3CC7

×20 3D5C

×21 3DDE

×22 3E50

×23 3EB3

×24 3F09

×25 3F53

×26 3F94

×27 3FCD

×28 4000

Zoom Ratio and Zoom Position (for reference) (EVI-D90N/P)

Zoom Ratio ×36 Lens

Optical Zoom Positon Data

×1 0000×2 1804×3 2296×4 28F0×5 2D58×6 30AA×7 3350×8 357E×9 3758

×10 38EF×11 3A52×12 3B84×13 3C90×14 3D7A×15 3E42×16 3EEE×17 3F82×18 4000

*Numberin()appliestoEVI-D90N/Ponly.

42

Command List

X12-NTSC/PAL

Digital Zoom Ratio

Digital Zoom Position Data

×1 4000

×2 6000

×3 6A80

×4 7000

×5 7300

×6 7540

×7 76C0

×8 7800

×9 78C0

×10 7980

×11 7A00

×12 7AC0

Lens control (EVI-D80N/P)

ZoomPosition

0000 to 4000 to 7AC0

Wideend Optical Digital

Teleend Teleend

FocusPosition1000toC000*FarendNearend*DependingontheFocusNearLimitsetting.

FocusNearLimit

1000:OverInf2000:8m3000:3.5m4000:2m5000:1.4m6000:1m7000:80cm8000:29cm9000:10cmA000:4.7cmB000:2.3cmC000:1cm

Asthedistanceontheleftwilldifferduetotemperaturecharacteristics,etc.,useasapproximatevalues.*Thelower1byteisfixedat00.

Lens control (EVI-D90N/P)

ZoomPosition

0000 to 4000 to 7AC0

Wideend Optical Digital

Teleend Teleend

FocusPosition1000toC000*FarendNearend*DependingontheFocusNearLimitsetting.

FocusNearLimit

1000:OverInf2000:12m3000:5.6m4000:4m5000:2.7m6000:2m7000:1.5m8000:80cm9000:30cmA000:19cmB000:9cmC000:1cm

Asthedistanceontheleftwilldifferduetotemperaturecharacteristics,etc.,useasapproximatevalues.*Thelower1byteisfixedat00.

Others

AFActiveTime1) 00 to FFAFIntervalTime1) 00 to FFRGain 00 to FFBGain 00 to FFApertureLevel 00 to 0FNRLevel 00 to 05

AutoICRON

OFFThresholdLevel00 to 1C

1)Unit:Onesecond

43

Command List

Pan/Tilt Status Code List

P Q R S

---- ---- 0--- ---1 APanmovementallthewaytotheleft

---- ---- 0--- --1- APanmovementallthewaytotheright

---- ---- 0--- -1-- ATiltmovementallthewayup

---- ---- 0--- 1--- ATiltmovementallthewaydown

---- ---- --00 ---- Panmovementiscorrect

---- ---- --01 ---- Panpositioncannotbedetected

---- --00 0--- ---- TheTiltmovementiscorrect

---- --01 0--- ---- TheTiltpositioncannotbedetected

---- 00-- 0--- ---- Nomovementinstructions

---- 01-- 0--- ---- InthemidstofaPan/Tilt

---- 10-- 0--- ---- Pan/Tiltcompleted

---- 11-- 0--- ---- Pan/Tiltfailed

--00 ---- 0--- ---- Notinitialized

--01 ---- 0--- ---- Initializing

--10 ---- 0--- ---- Initializationcompleted

--11 ---- 0--- ---- Initializationfailed

(-:optional)

Pan/Tilt Position (for reference)

Parameter (position)

PAN E1E5(-170degree)to1E1B(+170degree)

TILT FC75(-20degree)to0FF0(+90degree)(IMAGEFLIP:OFF)F010(-90degree)to038B(+20degree)(IMAGEFLIP:ON)

LED Status

Status POWER (Green) STANDBY (Orange)

Main power ON Power On(includinginitializingperiod) On Off

WhenreceivinginfraredsignalsformRemoteCommander Blinking Off

Atpositiondetectionerror On Blinking

StandbystatusPoweroffbyVISCAortheRemoteCommander

Off On

Main power Off Off Off

Initialization error

Pan/tilterror Blinking Blinking

Internalerror(LSI,etc.) Blinkingalternately

BOTTOM switch

Settingerror(Example:whentheBOTTOMswitch5issettoON.)

On On

44

OverviewTheD70modeallowsyoutocontroltheEVI-D80N/D80P/D90N/D90PusingVISCAcommandsfortheEVI-D70/P.MostoftheVISCAcommandsfortheEVI-D80N/D80P/D90N/D90PcorrespondtoonefortheEVI-D70/P.However,someoftheVISCAcommandsfortheEVI-D80N/D80P/D90N/D90ParedifferentfromthosefortheEVI-D70/Pindefinitionsofparameters.WhenyousendthosecommandstoanEVI-D80N/D80P/D90N/D90PwhoseD70modeissettoON,thecameratranslatestheparametersfortheEVI-D70/PtothosefortheEVI-D80N/D80P/D90N/D90Pandexecutesthecommand.Thefollowingparametersaresubjecttotranslation.

Zoomposition Pan-tiltspeed Pan-tiltpositionNotes

EvenifyousettheD70modetoON,theEVI-D80N/D80P/D90N/D90PmaynotemulatetheEVI-D70/Pperfectly.Thisiscausedbydifferencesinhardwarebetweenthetwomodels.

ThefunctionsthatareprovidedwiththeEVI-D70/PbutnotwiththeEVI-D80N/D80P/D90N/D90Pcannotbeexecuted.

Switching the ModeYoucanswitchtheD70modeONorOFFbyswitchingtheBOTTOMswitchatthebottomoftheEVI-D80N/D80P/D90N/D90P.TochangetheD70modesetting,movetheBOTTOMswitchtoONorOFFwhilethecamera’spowerisofforthecameraisinstandbymode.Then,turnthepoweronbyconnectingthecameratoanACoutletorbyusingtheVISCAcommandsortheRemoteCommander.Ittakesabout7-16secondsfortheimagetobedisplayedafterPan/Tiltinitializationmotionhasstopped.DonotturnoffDCpoweruntiltheimagehasbeendisplayed.ThemodewillnotchangeifyouchangetheswitchsettingoftheBOTTOMswitchafterthepowerhasbeenturnedon.Afteryouchangethemode,previouslysavedpositionpresetdatawillbelost.(Zoom,Pan/Tiltpositions,etc.willberesettotheirinitialsettings.)

D70 Mode

D�0 Mode

45

Accepting or Sending Back Commands

When accepting commands

Type of command D70 mode on D70 mode offCommontoboththeD70andD80N/D80P/D90N/D90P

Commonparameters AcceptsasisDifferentparameters TranslatestheD70’sparameterstothoseof

theD80N/D80P/D90N/D90PAcceptsasis

CAM_MemoryReset Memorizeddataitemsareerasedandcamerasettingsreturntoinitialvalues

Memorizeddataitemsareerased

OnlyfortheD80N/D80P/D90N/D90P AcceptsasisOnlyfortheD70 RefusesandsendsbacktheSyntaxErrormessage

When accepting inquiry commands

Type of command D70 mode on D70 mode offCommontoboththeD70andD80N/D80P/D90N/D90P

Commonparameters SendsbackparameterscommontoboththeD70andD80N/D80P/D90N/D90PDifferentparameters SendsbacktheD70’sparameterstranslatedfrom

thoseoftheD80N/D80P/D90N/D90PSendsbacktheD80N/D80P/D90N/D90P’sparameters

OnlyfortheD80N/D80P/D90N/D90P SendsbacktheD80N/D80P/D90N/D90P’sparametersOnlyfortheD70 RefusesandsendsbacktheSyntaxErrormessage

D�0 Mode

46

Translating Parameters

Zoom position

ThereisnochangeforEVI-D80N/D80P.EVI-D90N/D90Pemployan18×opticalzoomlensbuttherearenotranslatingparameters.Thezoomratioandcorrespondingpositiondataareasshowninthetablebelow(forreference).

Zoom Ratio × 18 Lens

Optical Zoom Position Data

×1 0000×2 1606×3 2151×4 2860×5 2CB5×6 3060×7 32D3×8 3545×9 3727

×10 38A9×11 3A42×12 3B4B×13 3C85×14 3D75×15 3E4E×16 3EF7×17 3FA0×18 4000

Pan/tilt speed

TheactualspeedthatisdefinedbytheparameterscorrespondstothatoftheD70.WhenthecamerareceivescommandssuchasPantiltDriveHome,Reset,orCAM_MemoryRecall,thatdonotincludespeedindications,theseoperationsarecarriedoutatthesamespeedastheywouldbewhentheD70modeissettoOFF.

Speed (deg/sec)

ParametersD80N/D80P

D90N/D90P

D70

01h 1.7 1.3 1.702h 2.2 1.7 2.203h 2.9 2.2 2.904h 4.1 3.2 4.105h 6.8 5.4 6.806h 11 11 1107h 16 16 1608h 21 21 2109h 27 27 270Ah 31 31 310Bh 35 35 350Ch 40 40 400Dh 42 42 470Eh 44 44 490Fh 46 46 5410h 48 48 5611h 50 50 6212h 79 79 6413h 81 81 6914h 83 83 7215h 85 85 7916h 87 87 8417h 90 90 90

18h1) 100 100 100

1) Max.panspeedis18h;max.tiltspeedis17h.

D�0 Mode

4�

Pan/tilt positionPan position

Cameras ParametersEVI-D70/P F725h(–170degrees)to08DBh(+170degrees)EVI-D80N/D80P/D90N/D90P

E1E5h(–170degrees)to1E1Bh(+170degrees)

Tilt position

Cameras ParametersEVI-D70/P FE70h(–30degrees)to04B0h(+90degrees)EVI-D80N/D80P/D90N/D90P

FC75h(–20degrees)to0FF0(+90degrees)

Translation of commands

Accepting parameters TranslationPanposition Multipliesreceivedparametersby17/5Tiltposition Multipliesreceivedparametersby17/5

D70 D80N/D80P/D90N/D90PPan/Tilt Pan Tilt

F725h E1E5h –… … –

FEF5h FC75h FC75h… … …

FFFDh FFF6h FFF6hFFFEh FFFAh FFFAhFFFFh FFFDh FFFDh0000h 0000h 0000h0001h 0003h 0003h0002h 0006h 0006h0003h 000Ah 000Ah0004h 000Dh 000Dh0005h 0011h 0011h0006h 0014h 0014h0007h 0017h 0017h0008h 001Bh 001Bh0009h 001Eh 001Eh000Ah 0022h 0022h000Bh 0025h 0025h

… … –04B0h 0FF0h 0FF0h

… … –08DBh 1E1Bh –

Translation when answering inquiry commandsThecamerasendsbackvaluesthatarecalculatedbyinverseconversionperformedwhenthecameraacceptscommands.Note

RepetitiveuseoftheAbsolutepositioncommandmayincreasethevariancethatisaccumulatedfromtranslation.

ExampleWhenyouexecutetheRelativepositioncommand100times,onestepafteranothertoturnthecameratotherightside:

Cameras ResultsEVI-D70/P Turnstotherightsideby7.5degrees.EVI-D80N/D80P/D90N/D90PwhoseD70modeisON

Turnstotherightsideby6.6degrees.

ForAbsolutePositioncommands,thepermissiblerangefordrivesettingsarethesameasthosefortheEVI-D70/P.Pandirection:–170degreesto+170degrees.Tiltdirection:–20degreesto+90degrees.

48

SystemVideosignal EVI-D80N/EVI-D90N:NTSC EVI-D80P/EVI-D90P:PALSynchronization InternalsynchronizationImagedevice EVI-D80N/EVI-D80P:1/4type

CCD EVI-D90N/EVI-D90P:1/4type

EXviewHADCCDLens EVI-D80N/EVI-D80P:18×

(optical),12×(digital) f=4.1–73.8mm,F1.4–F3.0 Horizontalangle:2.8(TELEend)to

48.0degrees(WIDEend) EVI-D90N/EVI-D90P:28×

(optical),12×(digital) f=3.5–98.0mm,F1.35–F3.7 Horizontalangle:2.1(TELEend)

to55.8degrees(WIDEend)Minimumobjectdistance EVI-D80N/EVI-D80P:10mm

(0.4inches)(WIDEend)to800mm(31.5inches)(TELEend)290mm(1127/64inches)(Default)

EVI-D90N/EVI-D90P:10mm(0.4inches)(WIDEend)to1500mm(591/16inches)(TELEend)300mm(1113/16inches)(Default)

Minimumillumination EVI-D80N/EVI-D80P:lessor

equalto0.4lux(F1.4)with50IRE

EVI-D90N/EVI-D90P:lessorequalto0.65lux(F1.35)with50IRE

Shutterspeed 1to10,000sec.VideoS/N Moreorequalto50dBPan/tiltaction Horizontal:±170degrees

Maximumpanningspeed:100degrees/sec.

Vertical:+90,–20degreesMaximumtiltingspeed:90degrees/sec.

Input/output connectorsVideooutput COMPOSITE(VBSVIDEO

OUT):RCAphonojack(1),75ohmunbalanced,1Vpp(at75-ohmtermination)

Synchronization:negative SVIDEOoutput(Y/CVIDEO

OUT):MiniDIN4-pintypeControlinput/output VISCAIN:MiniDIN8-pintype,

RS-232C VISCAOUT:MiniDIN8-pintype,

RS-232C VISCARS-422:9-pinPowerconnector JEITAtype4(DC12V)GeneralInputvoltage 12VDC(10.8to13.2VDC)Currentconsumption EVI-D80N/EVI-D80P:0.5Amax.

(at12VDC) EVI-D90N/EVI-D90P:0.67A

max.(at12VDC)Operatingtemperature 0ºCto40ºC(32ºFto104ºF)Storagetemperature –20ºCto+60ºC(–4ºFto140ºF)Dimensions Videocamera:145×164×

164mm(51/32×615/32×615/32inches)(w/h/d,excludingprotrudingparts)

RemoteCommander:56×26×210mm(21/4×11/16×83/8inches)(w/h/d)

Mass Videocamera: EVI-D80N/EVI-D80P:1440g

(3lb23/4oz) EVI-D90N/EVI-D90P:1460g

(3lb31/2oz) RemoteCommander:110g(37/8oz)Installationangle Lessthan±15degreestothe

horizontalsurface

Specifications

49

NoteAlwaysverifythattheunitisoperatingproperlybeforeuse.SONYWILLNOTBELIABLEFORDAMAGESOFANYKINDINCLUDING,BUTNOTLIMITEDTO,COMPENSATIONORREIMBURSEMENTONACCOUNTOFTHELOSSOFPRESENTORPROSPECTIVEPROFITSDUETOFAILUREOFTHISUNIT,EITHERDURINGTHEWARRANTYPERIODORAFTEREXPIRATIONOFTHEWARRANTY,ORFORANYOTHERREASONWHATSOEVER.

Supplied accessoriesACpoweradaptor(MPA-AC1) (AC100V,50/60Hz)(1)ACpowercord(1)RemoteCommander(RM-EV100)(1)Ceilingbracket(A)(1)Ceilingbracket(B)(1)Wirerope(1)ScrewM3×8(8)VISCARS-422connectorplug(1)OperatingInstructions(1)

Designandspecificationsaresubjecttochangewithoutnotice.

50

Specifications

Unit:mm(inches)

Dimensions

Top Back

Front Side

Bottom

170°

170°

104(4 3/32)164(6 15/32)

Ø145(5 1/32)

14( 9/16)20( 25/32)

51.5(2 1/32) 51.5(2 1/32)

77(3 1/32)42(1 43/64)

42(1 21/32) 42(1 21/32)

60(2 3/8)31

(1 15/64)

30(1 3/16)

30(1 3/16)

53.5 53.5(2 7/64) (2 7/64)

M3

M3

M3

(Leg)

4-Ø9(A)

Ø5, depth 5

1/4-20UNC, depth 6.5Tripod screw hole

BOTTOMswitch

166(6 35/64)

164(6 15/32)

72(2 27/32)8.5(11/32)

20°

90°

51

Specifications

Ceiling bracket (B)

46(1 13/16)

Ø107.3(4 7/32)

Ø121.2(4 25/32)

Ø83.5(3 9/32)

83.5(3 9/32)

4-4.5(3/16)

2-4.5(3/16)

2-4.5(3/16)2-4.5(3/16)

Ø88.9(3 1/2)

60°

45°

45°4-Ø4.5(3/16)

Adjustable limit: ±30°

Rear

Front

Unit:mm(inches)

52

Precautions

Other

Donotapplyexcessivevoltage.(Useonlythespecifiedvoltage.)Otherwise,youmaygetanelectricshockorafiremayoccur.

Incaseofabnormaloperation,contactyourauthorizedSonydealerorthestorewhereyoupurchasedtheproduct.

Software

UseofthedemonstrationsoftwaredevelopedbySonyCorporationoruseofthesoftwarewithcustomerdevelopedapplicationsoftwaremaydamagehardware,theapplicationprogramorthecamera.SonyCorporationisnotliableforanydamagesundertheseconditions.

Operation

Startthecameracontrolsoftwareonyourcomputerafteryouturnonthecameraandtheimageisdisplayed.

Operation and storage locations

Donotshootimagesthatareextremelybright(e.g.,lightsources,thesun,etc.)forlongperiodsoftime.Donotuseorstorethecamerainthefollowingextremeconditions:Extremelyhotorcoldplaces(operatingtemperature

0˚Cto40˚C(32˚Fto104˚F))Closetogeneratorsofpowerfulelectromagnetic

radiationsuchasradioorTVtransmittersWhereitissubjecttofluorescentlightreflectionsWhereitissubjecttounstable(flickering,etc.)

lightingconditionsWhereitissubjecttostrongvibration

Care of the unit

Removedustordirtonthesurfaceofthelenswithablower(commerciallyavailable).