gardner denver - esm30

Download Gardner Denver - ESM30

Post on 06-Apr-2018

277 views

Category:

Documents

3 download

Embed Size (px)

TRANSCRIPT

  • 8/3/2019 Gardner Denver - ESM30

    1/8

    Think Smarter.Think Gardner Denver.

    ESM 30132 SeriesScrew Compressors

  • 8/3/2019 Gardner Denver - ESM30

    2/8

    The growing industrial demand for compressed air requires compressor

    manufacturers to provide more reliable, economic and versatile

    compressors within a small footprint. Gardner Denver addresses these

    requirements, with the introduction of the new ESM 30132 Series.

    The ESM 30132 Series of air compressors features the latest in

    technology, innovation and engineering.

    Low dBA level, small footprint, high efficiency and easy service are

    standard benefits with the ESM Series.

    Designed and manufactured in accordance with ISO standards, theESM series meets the industrys expectations of the highest quality

    standards.

    These fixed speed compressors continue to further strengthen

    Gardner Denvers success story as a world leader incompressors.

    Proven Results Even In Toughest Conditions

    Gardner Denver product development is a balance of technology,

    efficiency and performance all focused on meeting your demand

    for compressed air.

    The perfectfit to maximizeproductivity

    DIN ISO 9001/EN 29001

    Certificate: 5168

  • 8/3/2019 Gardner Denver - ESM30

    3/8

    Without an efficient, durable air-end,

    an unique compressor design means

    nothing.

    Thats why Gardner Denver designs and

    manufactures this critical component to

    exact standards.

    Efficient Gardner DenverAir-Ends

    The ESM 30132 series is specially designed to

    meet the demands for continuous 24-hour use

    and absolute uptime required in critical

    industrial processes.

    More weight on your benefits

    Efficiency

    Low Noise Operation

    Advanced Control System

    Modern Cooling System

    Easy Maintenance

    Advanced Design

    Thousands of our air-ends

    are in operation world-wide,

    proving that the heart of the

    ESM 30132 series can stand the

    test of time.

  • 8/3/2019 Gardner Denver - ESM30

    4/8

    1 +1= 1

    A Perfectly Matched Design of

    Motor, Direct Drive and Air-End

    Optimized Cooling System

    High efficiency radial fan

    The radial fan concept represents quiet and ef ficient operation.

    Additionally peripheral speed means low noise and the power

    consumption is up to 50 percent lower than a comparable axial fan.

    Another advantage is the high residual thrust (stable curve) that

    allows the use of exhaust ducting with a pressure drop of up to 130 Pa.

    Also the oversized after coolers used in the ESM 30132 series

    ensures an optimum cooling and discharge temperature.

    Small Installation Footprint & Integrated Dryer Concept

    Thanks to the advanced compressor concept

    the required footprint is reduced down to a minimum.

    The optional integrated refrigerant dryerreduces

    both extra installations and the required floor

    space, making the compressor easier to install.

    Optimised cooled

    Low installation costs

    Same dimensions with integrated dryer option

    Utilising the premium sized air-end with optimised rotor tip speed, the compressor works more efficiently

    and furthermore lowers the noise level. This allows additional 8 % energy savings for ESM50/80 models

    of the extended 45/75 kW class.

    The efficient motor/drive/air-end combination are designed

    to reduce the specific power, which benefits you in the formof energy cost savings.

    Additionally Gardner Denver is using TEFC IP55,

    high efficiency motors.

    An automatic motor lubrication system increases

    bearing life and is maintenance free.

    ESM 55132

    Optional integrated refrigerant dryer

    requires no extra floor space and reduces

    extra installations.

  • 8/3/2019 Gardner Denver - ESM30

    5/8

    GD PILOT MK

    Multiple languages

    Total running and loaded hours

    Service interval information

    Running condition indicators

    GD PILOT MK Control Systemfor reliability and simplicity of operation

    The GD Pilot MK also has the capability

    to have programmable inputs andoutputs, control additional equipment as

    well as providing the following features:

    The GD Pilot MK controller has a cleartext display with menus and tactile

    buttons for easy navigation.

    The controller ensures reliable operation

    and protects your investment by

    continuously monitoring the operational

    parameters, which is essential

    to reducing your running costs.

    Error log monitor

    Week clock timer

    Secondary pressure

    function

    Remote control

    Auto restart af ter power-cut

    Emergency stop

    RS 485 Modbus RTU

    Advanced Control System

  • 8/3/2019 Gardner Denver - ESM30

    6/8

    Easy Servicing

    The design of these packages assures the service points

    are readily accessible. The enclosure side doors are hingedand removable to allow complete access to all service

    points. The reduced number of moving parts also lowers

    maintenance costs.

    Gardner Denver carries a full line of after sales

    products to meet all your requirements. By using

    original spare parts, you will save both time and

    money in the long term.

    The synthetic efficiency advantage

    with Gardner Denver AEONTM 9000 SP lubricant

    as a standardA unique synthetic lubricant designed specifically to maximise

    compressor efficiency and provide optimum lubricity.

    A proven track record of service-life up to 6,000 hours in the

    most rugged operating environments.

    Extended life time

    Maximum protection for internal components

    Protect your investment

    Gardner Denver recommends regular oil sampling and analysis provided by GD to ensure the highest level

    of protection against component failure.

    Green advantage

    Extended drain intervals,

    minimum disposal costs

    Energy savings as a result of

    optimum operation under

    demanding temperature conditions

    Make considerable savings on your

    energy bill

    Reduce your carbon foot printand save even more moneywith our optional heat recovery system

    Re-use heat for industrial processes, heating systems, hot water and hot air!

    Gardner Denver utilizes heat recovery systems

    to maximize efficiency by recovering energy

    generated during compressed air production.

    As much as 90 % of all energy used can be recovered and utilized

    Thermostatic control maintains desired temperature in the

    compressor

    Available factory f itted or as a retrofit kit

  • 8/3/2019 Gardner Denver - ESM30

    7/8

    Technical Data

    1) Data measured and stated in accordance with ISO 1217 Ed. 4, Annex C and Pneurop / Cagi PN2CPTC2 test code and the following working pressures are used: 7.5 bar

    models at 7 bar, 10 bar models at 9 bar and 13 bar models at 12 bar.2) Measured in free field conditions in accordance with the Pneurop / Cagi PN8TNC2.2 test code, +/ 3 dB3) Flow capacities to ISO 7183 refer to a working pressure of 7 bar, an inlet temperature of 35 C and an ambient temperature of 25 C, saturated / dew point to ISO 8573-1

    ESM3050 Fixed speed rotary screw compressors

    COMPRESSOR MODEL ESM30 ESM37 ESM45 ESM50

    Maximum target pressure bar g 7.5 10 13 7.5 10 13 7.5 10 13 7.5 10

    Drive motor kW 30 37 45 45

    FAD at working pressure 1) m/min 5.76 5.13 4.38 7.11 6.19 5.32 8.01 7.02 6.13 8.67 7.42

    Noise level 2), 1 m dB(A) 67 68 69 67

    Weight kg 923 966 988 1055

    Dimensions (LxWxH) mm 1722 x 920 x 1659 1722 x 920 x 1659 1722 x 920 x 1659 1722 x 920 x 1659

    INTEGRATED DRYER OPTION

    Pressure dew point 3) oC 3 3 4 3 3 4 3

    Pressure Drop kPa 8 12 14 17

    Total power kW 1.3 1.8 1.8 1.8

    Refrigerant R407C kg 1.6 1.35 1.35 1.35

    Weight kg 110 120 120 120

    COMPRESSOR MODEL ESM55 ESM75 ESM80

    Maximum target pressure bar g 7.5 10 13 7.5 10 13 7.5 10

    Drive motor kW 55 75 75

    FAD at working pressure 1) m/min 10.71 9.54 8.27 13.76 12.48 10.51 14.75 12.32

    Noise level 2), 1 m dB(A) 69 72 69

    Weight kg 1725 1765 2010

    Dimensions (LxWxH) mm 2158 x 1223 x 1971 2158 x 1223 x 1971 2158 x 1223 x 1971

    INTEGRATED DRYER OPTION

    Pressure dew point 3) oC 3 3 3

    Pressure Drop kPa 20 16 12 16 12 10 16 12 10

    Total power kW 2.2 3.3 3.3

    Refrigerant R407C kg 1.5 1.9 1.9

    Weight kg 128 139 139

    ESM5580 Fixed speed rotary screw compressors

    COMPRESSOR MODEL ESM90 ESM110 ESM132

    Maximum target pressure bar g 7.5 10 13 7.5 10 13 7.5 10 13

    Drive motor kW 90 110 132

    FAD at working pressure 1) m/min 17.48 15.52 13.48 20.80 18.67 16.22 22.89 21.29 18.59

    Noise level 2), 1 m dB(A) 73 75 76

    Weight kg 2513 2614 2778

    Dimensions (LxWxH) mm 2337 x 1368 x 2039 2337 x 1368 x 2039 2337 x 1368 x 2039

    ESM55 toESM132 models are also available as WATER COOLED versions, for technical specifications please refer

    to the water cooled technical information sheets.

    ESM90132 Fixed speed rotary screw compressors

  • 8/3/2019 Gardner Denver - ESM30

    8/8

    For additional information please contact Gardner Denver or your local representative.

    info.tampere@gardnerdenver.com

    www.gardnerdenverproducts.com

    Specifications subject to change without notice.Copyright 2010 Gardner Denver 58

    2E1010B&N

    Whatever the Application All from One

    Gardner Denver is a recognised leader providing com