oki brochure

Offshore Installation Equipment

Offshore Kinematics Inc (OKI) is part of the Dockwise group of

companies and the innovative leader in the development and supply of

float-over Installation systems. With decades of experience in the

float-over industry, OKI provides superior reliability for critical float-over

operations through quality control standards and fabrication procedures.

Offshore Kinematics Inc is also a general supplier for design and

fabrication of small offshore structures, advanced testing, and custom

elastomer systems.

Based in Houston, Texas, OKI provides innovative solutions in

these key areas:■ Float-Over Hardware■ Engineering & Design■ Fabrication ■ Testing■ Custom Systems■ Research & Development (R&D)

Float-Over Hardware

OKI is the worldwide leader in engineering, design, testing, and supply

for all required float-over hardware. Engineering is conducted with

advanced finite element analysis and testing is performed on

components and full assemblies to ensure performance in the field.

Every component is manufactured to strict tolerances and tested for

quality and safety ensurance. OKI has the capacity to perform full-scale

system tests and advanced finite element analysis to ensure system

performance.

OKI delivers a wide range of customized services and expertise from

FEED to Offshore Installations. Examples of our customized designs and

patented products include:■ Leg Mating Units (LMU's)■ Deck Support Units■ Lower Systems■ Fendering Systems■ Stoppers■ Motion Suppression Systems

Offshore Kinematics (OKI)

OKI supplied the Leg Mating Units

(LMU's) and Deck Support Units

(DSU's) for the CPOC Block B-17

float-over, which occured in August

2009. The 16,400 MT Deck was

transported and installed by the

Black Marlin, a Dockwise vessel.

Engineering and Design

OKI provides engineering and design assistance for float-over systems

and mechanical structures.

Engineering Services include:■ Float-Over Installation Concept Selection and Concept

Evaluation: Technical evaluation and feasibility analysis of the

installation alternatives, including different float-over

installation concepts.■ FEED: Develop system specification and float-over

installation procedures. ■ Detailed Design: Complete design and analysis of all

installation systems. ■ Onsite Supervision: Qualified personnel for supervision in

client yard and offshore during operations.

OKI also provides detailed engineering, design, and analysis of deck

support frames, offshore appurtenances, and motion compensation

systems for mechanical structures, including:■ Deck Support Frames: Complete design of support structures. ■ Appurtenances: Installation Aids, Boat landings, and Fendering. ■ Motion Compensation: Mechanical design of tensioners, compliant

guides and hydraulic systems.

Fabrication

OKI focuses on specialized fabrication of offshore mechanical systems,

such as float-over hardware and motion compensation systems. Another

area of OKI's expertise is general marine construction, which includes:■ Deck Grillage: Deck Support Frames and Load Spreading Structures ■ Platform Appurtenances: Boat Landings, Helidecks, and Bridges ■ Pressure Vessels: ASME vessels and related fabrications

OKI has developed the capacity to deliver specialty systems and general

fabrications in several locations, including the ability to perform

fabrication worldwide to suit the diverse needs of clients and projects.

OKI performs fabrication in the United States, Mexico, Indonesia and

China, while maintaining international standards of quality and safety. ■ United States: Houston, Texas and Houma, Louisiana ■ Mexico: Tampico, Mexico ■ Indonesa: Batam, Indonesia ■ China: TangGu, China

At the outset of each project, schedule and logistics are considered to

determine the optimum fabrication location.

The LMU for one of the

6 BP AIOC platforms is

export ready and

loaded onto a truck for

delivery after the unit

passed full scale

assembly Factory

Acceptance Testing.

The Kikeh Spar, constructed by Technip

and operated by Murphy Oil, required

LMU's with both vertical and horizontal

flexible components. OKI's Lateral

Compression Ring (LCR) was

incorporated into this design.

OKI uses 3D CAD software to

perform structural analysis and

visualize all aspects of design to

prevent any issues that may arise

during fabrication.

Testing

OKI performs testing services for all its production parts, testing all

functional components and then retesting full assemblies. During the

past 10 years, OKI has developed an extensive technical database on

elastomer components, sand lowering systems, and stressed sliding

surfaces.

Testing services include:■ Complex & Multi-Access Compression / Shear Testing ■ High-Capacity Compression Testing ■ Creep and Temperature Affects Testing

OKI is pleased to announce the world's highest capacity

compression test press:■ Compression Load: 16,300 MT vertical Load to 1.5 m Stroke■ Daylight: Part, Die, Mold sizes up to 7.6 m tall x 4.6 m wide,

with ability to expand height to suit customer requirements

The OKI Press is available to clients from multiple industries and

government and education entities for R&D, Testing and

Manfacturing.

Custom Systems

Elastomer:

OKI supplies a full range of custom elastomer, motion compensations,

and friction/wear systems for applications, including:■ Centralizing Risers & Reducing Riser Bending and Fatigue ■ Spar Air Can Compliant Guides with Multiple Stiffnesses ■ Spherical Bearings and Flexible Joints for FPSO, Riser, TLP, etc. ■ Compression and Shear Elements for General Applications

OKI works with clients to develop a custom design to meet the most

demanding requirements under dry, splash zone, or subsea environments.

Wellspring Cylinder:

OKI is now promoting its patented Wellspring Technology for fluid power

systems. This is a low-cost, ultra-high capacity hydraulic or pneumatic

cylinder. Power medium can be seawater, air, or other non-volatile fluids.

Applications include:■ Subsea Actuators: Wellhead Unlocking and Subsea Valve Actuation ■ Motion Compensation: Adjustable Stiffness While Under Motion ■ Stamping & Pressing: Ultra-High Capacity Compression Loads

One of OKI's core pillars of quality is the internal testing regime

required on all parts delivered to customers to ensure structural

integrity and performance requirements. OKI has constructed the

world's largest press of this nature to increase its current

capacity to accommodate float-over hardware for the heaviest

platforms in the world.

PRT Compliant Centralizer

Units for the BP Hostein Spar.

OKI's custom product

designed and developed to

customer requirements.

Research & Development

In addition to a strong core product line of float-over hardware, OKI offers

R&D services to customers for new products or modifications to current

products. During the R&D service, prototype parts are manufactured and

put through an extensive testing program to evaluate performance and

functionality. All tests are performed at full scale, integrated with actual

interface products to simulate actual operation conditions. OKI testing

requirements always meet and exceed the specified client functional

requirements. OKI now offers several additional product lines, which

originated as R&D projects:■ Spar Air Can Compliant Guides■ Secondary Well Head Disconnectors■ Riser Centralizers■ Riser Guide Devices■ Laminated Bearings

OKI has satisfied all customers in the past with R&D services for many

issues related to fatigue, energy compensation, and motion

compensation. Throughout the years, OKI has accumulated a vast bank of

testing data and is able to translate this information into new and better

products. OKI is well suited for R&D projects because of its efficient

production capabilities, vast industry knowledge and experience, readily

available testing facilities, and limited overhead.

OKI's extensive resume, including 12 platforms at 14000+ MT, forms the

foundation of our experience and expertise, which enables us to execute

projects worldwide, and we’re ready to provide you with the innovative

solutions your projects demand. To learn more about the difference OKI

can make, visit our website at www.offshorekinematics.com.

Creep Testing performed by OKI in excess

of 3500 MT on Float-Over hardware

components to ensure proper function

and performance in the field.

5th Generation Compliant Guide design with dual

stiffness, which prevents impacts between Spar Air Cans and

surrounding Trusses. Installed on Technip Constitution Spar.

Laminated Cylinderical Bearing R&D project for OKI,

which required precise layer thicknesses and shim

placements. Post production shim placement verified by

ultrasonic and radiographic examination.

A World of Expertise

OKI and Dockwise have worked on more float-over projects than any

other company in the industry. Recent projects include:

McDermott Chevron Platong

19700 MT, 8 pile (in progress, 2010)

Complete system design, analysis and supply.

Woodside North Rankin B

23500 MT, 4 leg (in progress, 2010)

Complete system design, analysis and supply.

CPOC Block B-17

16400 MT, 8 pile (August 2009)

Turnkey transportation and installation by

float-over, including all engineering and supply

of float-over hardware.

04-2

010

OFFSHORE KINEMATICS, INC.

The Atrium at Park Ten, 16340 Park Ten Place, Suite 200, HOUSTON, TX 77084, USA

TEL: +1 713 934 73 00. FAX: +1 713 934 73 33

[email protected]

For more information about our offices and commercial agents worldwide and how to contact them, please visit www.offshorekinematics.com

Copyright in this folder including but not limited to text, photographs, graphics and software is owned by or licensed to the publishers, Dockwise Ltd. All rights are hereby reserved by Dockwise Ltd. The folder, or any part of it, may not otherwise be downloaded or copied, stored in any medium (including any websites), distributed, transmitted, re-transmitted, modified or shown in public without the prior written consent of Dockwise Ltd.

If you wish to make inquiries about a license to reproduce material from the folders of Dockwise Ltd., please contact: [email protected]

Head Office

OKI Head Office

Commercial Offices

Dockwise Group of Worldwide Locations