atlas 1 beam pipe support structure (bpss) interface and assembly final design review, april 2003 e....
TRANSCRIPT
![Page 1: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/1.jpg)
1
ATLAS
Beam Pipe Support Structure (BPSS)Interface and Assembly
Final Design Review, April 2003 E. Anderssen, N. Hartman
LBNL
![Page 2: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/2.jpg)
2
ATLAS
Services andBeam Pipe Support Structure
Beam Pipe Support
SCT Barrel
TRT Forward
Side C Side A
Services andBeam Pipe Support Structure
Pixel Detector
Schematic of Beampipe, Support Structure, and Pixel Package in ID
TRT Forward
Beam Pipe Support Wire
ID Endplug
PP1
PST Support Flexures
Insertion Trolley
Beam Pipe
Pixel Support Tube
Package Insertion Riders
Z=848 – Wire SupportZ=3092 – PP1
Z=3120 – Adjustors
PP1 Bellows/Temporary Support
Z=~3200 – Bellows/Temp. Support
![Page 3: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/3.jpg)
3
ATLAS “Package”
Beam Pipe Support Stru
cture
Beam Pipe Support Stru
cture
Pixel Detecto
r
Not Shown
Beam Pipe
Service Panels
![Page 4: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/4.jpg)
ATLAS Rails
![Page 5: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/5.jpg)
5
ATLAS Service Quarter Panel
• Service Quarter Panel structure carries Disk and Barrel panels as well as PP1 quarter panel on same structure
• Disk panels not shown—current designs being modified• Tubes not shown as well—both available at June Review
![Page 6: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/6.jpg)
6
ATLAS PP1 Routing
• Routing for PP1 dominates the volume at the end of the Package
• The routing is not complete, but is intended for Review in June
• Bellows design to couple PP1 to Beam Pipe is ‘Complete’ implies ~73N compressive load on Beam Pipe during Bakeout.
• Uses Large Convolution depth, but relatively short length
• Dimensions open to discussion, based on acceptable loads (can increase length/convolution depth ratios to suit acceptable load and internal clearances
![Page 7: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/7.jpg)
7
ATLAS Patch Panel One
PP1 layout determines final length of the Forward section of the PST—Layout of region is progressing and being modelled—in time for June (only just)
![Page 8: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/8.jpg)
8
ATLAS PP1 Interface to Adjustors
• Survey access is poorly understood now
• Hope to reduce some occupancy of PP1 fittings
• Bellows design exists, can be optimized for possible access
• Internal volume of BPSS is not a limit as will be seen in later slides
• Non conventional options for survey will likely be needed
• Temporary support of Beam Pipe is from ‘Can’ installed on inner radius of PP1Fixation of service structure to PP1
Quarter Panel Breaks
![Page 9: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/9.jpg)
9
ATLAS PP0 End of Frame
• PP0 is not technically an interface to Beam Pipe but is a critical interface to BPSS
• Disk/B-Layer panels under revision currently—not shown
• Trolley is designed to allow for cooling tubes which are also installed with Service Quarter Panels
• Note—PP1 quarter panels are fixed to the Service Quarter Panels and are installed with them
• This is important at a later stage where PP1 will support the Beam Pipe
![Page 10: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/10.jpg)
10
ATLAS Pixel package Overview
• The Pixel package is first integrated on surface into an Integration & Testing Tool (ITT) and then slid into a Dummy Support Tube (DST)
• the DST in then lowered into the pit in a cradle, connected and aligned to the PST and the pixel system is moved to its final position
• The Beampipe is the first article installed in the ITT
Dual V Rail System
Wheels and driving system
U Supports
Support Frame
B-Layer Cart
![Page 11: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/11.jpg)
11
ATLAS Pixel Assembly
Beampipe temporarilyheld with auxiliary supports
“U-Supports”on installation and testing tool - ITT
![Page 12: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/12.jpg)
12
ATLAS
Beampipe support transferredto support frames—see comments
Following slides
Pixel Assembly
![Page 13: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/13.jpg)
13
ATLAS Beampipe Support Frame
Wires at Z=-848,+848
Fixed Adjustors(no spring)
Top and Side
Sprung AdjustorsSide and bottom(tension limiters)
Wire Adjustors
Cruciform supports
Longerons
Service panelAttachment points
ReinforcingLongerons, Attach Points to PP1
2 Frames – 1 A Side, 1 C SideSingle Frame Shown Here
4 Support Wires, 1 Support Plane
![Page 14: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/14.jpg)
14
ATLAS Beam Pipe Collars
Split Conical Ring Allows Free Placement in Z
Wire Anchor Point
Kapton Heater
Aerogel Insulation
![Page 15: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/15.jpg)
15
ATLAS Access to wires during Assembly
• Access to wires prior to Service Panel installation is excellent
• Service Panels installed after the wires are routed through tubes
• Wires then inserted through adjustors at end of longerons
Longerons
![Page 16: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/16.jpg)
16
ATLAS Assembly of Adjustor/Limiter Unit
Tension Limiter Assembled, Spring Compressed
Wire Fed Through, Clamped into Collet
Wire Adjustor Seated in Tension Limiter
Max “IN” Adjustment Max “OUT” Adjustment
![Page 17: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/17.jpg)
17
ATLAS Adjustor/Tension Limiter
Preload Adjustor Barrel
Limiter Spring
Wire Adjustor Screw
Wire Adjustor Nut
WireCollet &
Nut
Wire
Tension LimiterPlunger
Wire Guide
![Page 18: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/18.jpg)
18
ATLAS Assembly Continued—Services Added
• Service Panels Are Added to top of package
• Bottom of package has limited access due to ITT support structure
• Note that half of PP1 is assembled at this stage, and can be fastened together
• Temporary support via PP1 is possible at this stage
![Page 19: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/19.jpg)
19
ATLAS Bottom Services Installed
• Bottom services can be installed• Note—this picture shows direct
bottom, Package can rotate only 90 degrees plus a little in the ITT
• At this stage it is required to have temporary supports of Beam Pipe installed to allow for this rotation
![Page 20: ATLAS 1 Beam Pipe Support Structure (BPSS) Interface and Assembly Final Design Review, April 2003 E. Anderssen, N. Hartman LBNL](https://reader035.vdocuments.net/reader035/viewer/2022062805/5697bff71a28abf838cbee44/html5/thumbnails/20.jpg)
20
ATLAS Panel Installation Detail
• This shows some detail of how panels are supported to provide adequate support for the temporary support
• Note that PP1 is threaded over Adjustors during installation