WE PROVIDE

FULL MOVEMENT

Our advantages:

- flexibility, - we listen to the needs of our customers, - neatness, - professionalism, - fast response times, - responsibility.

The values in which we believe, are the assurance of satisfaction for our customers. Our main advantage is exceptional flexibility, as we can manufacture the most demanding cylinders for hydraulic devices according to the needs of our customers.

The Mapro product range are distinguished by their superior design, high degree of safety and all have been 100% tested.

We are committed to respecting the environment. Our manufacturing is conducted in an environmentally friendly manner and we follow the highest ecological standards.

Our a

- flexi- we l

- neatf

2

Our mission is to provide full and reliable movement for hydraulic devices.

Mapro d.o.o., produces and markets hydraulic cylinders, chromium-plated piston rods, rods, seals and other essential components for the production of hydraulic cylinders. Our range of products encompasses everything starting from simpler assignments, to the most demanding high-tech cylinders and hydraulic components.

STRONG

ROOTS

ENSURE

RELIABLE

GROWTH

Mapro is a family company, which since its founding in 1992 has been growing consistently. Aside from expert knowledge, which is a pre-condition of quality work, the secret of the fast and successful development of our company also resides in its foundation – the family.

We believe that our strong family is a good family. Such a family most easily survives all tribulations and every day challenges. It is no different in business. A strong and close family is expressed in the way we operate our company. We are convinced that inside Mapro we are so successful at pushing the limits, because our work is based on belonging, respect and the strong connection between employees.

We are proud that our partners and customers with whom we are connected through long-term relationships, also feel that way. We are more than happy to share our knowledge and capabilities, with which we build into our high quality products.

We work closely with experts from the public outside our company, among others with the school for machinery in Škofja Loka and the Faculty for Mechanical Engineering at the University in Ljubljana. Because we believe in our future, we are proud of the fact that we can transfer our knowledge to the younger generations of machinists and machine engineers.

3

At Mapro, we are proud of our strong roots, as only those who are aware of their foundations can reach for the sky.

FROM THE SEAL TO

THE CYLINDER

At Mapro, we manufacture and market all the main essential components for hydraulic devices. The core of our manufacturing is the production of very diverse kinds of hydraulic cylinders.

Our range of products encompasses the simplest products to the most demanding, high-tech cylinders with measuring blocks, sensors, and of above standard dimensions, up to 6 metres in length.

facture andessential

draulic devices.nufacturing is thediverse kinds of

cts encompassescts to the most

ch cylinderscks, sensors, andimensions, up to

Mapro d.o.o. is founded. Move to a new location to Strojarna in Žiri.

Purchase of land in an industrial zone in Žiri and the construction of a business facility.

4

MAPRO HIGHLIGHTS TIMELINE

1992 1998 2004

Products:

- hydraulic cylinders, - chromium plated bars/ piston rods, - tubes for hydraulic cylinders, - hydraulic seals, - rod ends, - bearing, - bushes, - various types of steel, - cast iron, - component parts for hydraulic cylinders, - hydraulic aggregates, - hydraulic components.

THE BEST

SOLUTIONS

ARE SIMPLE

The most demanding products, which for many companies represent a technological challenge, are for our experts at Mapro just a challenge in search of a solution. With our expert knowledge, innovation and scope, we can take on the manufacture of even the most demanding projects. We are convinced that every problem can be solved in a simple way, as usually it is precisely the simplest solutions which are best.

In our research-project design department we offer customers complete "know-how", from project design to completion. The project design of all our products takes place using the most modern 3D programs. As we use the most modern equipment, we can manufacture products in accord with the most challenging requirements of our customers in the shortest possible time.

Services:

- research and project design of hydraulic cylinders, - service and repair of hydraulic cylinders, - cutting by machine saw, - machine treatment.

In our resecomplete "project desmodern 3Dcan manufrequireme

Se

- re

Expansion of the workshop and warehouse space.

Updating the corporate identity. Utilisation of solar energy. 5

2008 2009 2010

FLEXIBILITY IN

MANUFACTURE

At Mapro, we dedicate a lot of our attention to the on-going education of our experts, to the most modern software and a modern machine room. This enables us to perform fast, accurate and efficient treatment of hydraulic cylinders, even when faced with the most demanding and specific requirements of our customers.Every high-tech cylinder is manufactured with exceptional attention to detail and precision. We manufacture cylinders up to 6 metres in length and up to 400 millimetres in diameter.

Machine room:

- three machine saws for cutting materials, of these there are two CNC saws capable of cutting up to 300mm in diameter,- CNC processing centre VF 3,- CNC lathe SKT28 for larger work pieces, even up to 80kg,- lathe up to 6m of lathe length, - cutter and multiple drilling machines,- modern paint bay,- own testing device for cylinders up to 350 bars.

s enables us to perform fast, accuratydraulic cylinders, even when faced

and specific requirements of our

manufactured with exceptionalision. We manufacture cylinders upp to 400 millimetres in diameter.

Machine

- three mtwo CN

- CNC pr- CNC lat- lathe u

6

PROVEN

QUALITY

Cooperation with the expert public

We consider our cooperation with the Faculty of Machine Engineering at the University of Ljubljana to be one of the biggest recognitions of our work.

We are included in the School in the Economy projects, Partnership seminars and work, as well as the international European project, Cross Inno. Within the framework of the projects mentioned, we take high school students and college students of machine engineering, as well as delegations of experts from Slovenia and Europe on various tours. We firmly believe in the exchange of experiences, which is why we gladly share our knowledge.

7

100% tested

At Mapro d.o.o., quality is built in from the very beginning, starting with the planning of the product, and continuing on with the purchase of the raw materials, intermediate and final controls. Every cylinder which leaves Mapro is 100% tested. Each and every one is washed, waxed, cleaned and tested after manufacture using our testing equipment. Testing seal tightness is conducted in accord with ISO standards. Our high-tech cylinders are tested twice. It is exactly because of our thorough checking that customers who buy our cylinders can completely trust and believe in their safety and quality.

Mapro d.o.o. Industrijska ulica 12 4226 Žiri, Slovenia European Union

T: + 386 4 510 50 90F: + 386 4 510 50 91E: info@mapro.siI: www.mapro.si

THE FUTURE

IS AT HAND

You can browse our catalogue of products on the web on www.mapro.si, or we can send it to you by mail.

ŽIRI